Project

General

Profile

BaofengUV5R » History » Revision 15

Revision 14 (John LaMartina, 06/20/2016 03:02 PM) → Revision 15/31 (John LaMartina, 06/20/2016 03:03 PM)

{{toc}} 

 h1. Baofeng UV5R / UV82 (and varients) 

 This page provides general tips and troubleshooting for the Baofeng UV-5R, UV-82, and related radios. The UV-5R is the base model for a lot of variants, so this page will apply to many more people than just those with that specific badge on their radio. This information is a summarized version of the Miklor page on the subject. Go there for "more detailed information":http://www.miklor.com/COM/UV_ErrorMess.php 

 h2. Common Errors 

 h3. Radio Did Not Respond  

 This is a very common problem. Slightly offset audio jacks could be the problem. Make sure the connector is snapped in all the way. Some cables require a really hard push to snap in that last 1/16 inch. One indication is that the transmitter may be keyed. A slight trimming of the cable's plug side and edge may be required. 


 h3. Driver Issues  

  

    Many of the inexpensive programming cables are not the bargain they appear.  
 Due to Prolific USB/Serial chip 'clones' found in generic USB programming cables, an older driver is required in lieu of the driver now automatically supplied by Windows. for "more detailed information":http://http://www.miklor.com/COM/UV_Drivers.php