Bug #7191: Chirp not allowing 2.5kHz step on Wouxun KG-UV6X - CHIRP

Actions

Copy link

Bug #7191

closed

Chirp not allowing 2.5kHz step on Wouxun KG-UV6X

Added by Jim McCorison about 5 years ago. Updated almost 5 years ago.

Status:

Closed

Priority:

High

Assignee:

Category:

Target version:

Start date:

10/29/2019

Due date:

% Done:

100%

Estimated time:

Chirp Version:

daily

Model affected:

KG-UV6X

Platform:

Windows

Debug Log:

I read the instructions above:

Description

Somewhere in the past few months it appears that a bug was introduced into Chirp for the Wouxun KG-UV6X. It is no longer accepting 2.50kHz step frequency programming. When importing frequencies into a downloaded image the 2.50kHz are dropped. Attempting to manual enter a frequency gives the error:

Error setting memory: Tuning step 2.5 not support
Frequency requires 2.50kHz step

I have confirmed that the VFO A/B Frequency Steps are set to 2.5. This occurs when importing or manually entering into downloaded images from the newest shipped versions of the KG-UV6X as well as older previously programmed radios. This behavior is still present in the most recent daily.

Files

debug.log (106 KB) debug.log

Jim McCorison, 10/29/2019 08:52 AM