Project

General

Profile

Actions

Bug #6925

closed

Yaesu FT-4XR Skip Function is Inverted

Added by Donald Bryant over 4 years ago. Updated over 3 years ago.

Status:
Closed
Priority:
Normal
Category:
-
Target version:
Start date:
07/20/2019
Due date:
% Done:

100%

Estimated time:
Chirp Version:
daily
Model affected:
Yaesu FT-4X, FT-4V, FT-25, FT-65
Platform:
All
Debug Log:
I read the instructions above:

Description

The slip function is inverted. an S means its in the scan list on this model and is opposite of prior models. Just confirmed this. Listed before can't enter any out of ham band channels.


Files

ft4.py (51.2 KB) ft4.py Corrected driver for Yaesu FT4 Bernhard Hailer, 04/28/2020 08:15 PM

Related issues

Related to Bug #8045: Yaesu FT-65R scan skip setting switchedClosed07/06/202007/10/2020

Actions
Related to Bug #8029: Yaesu FT4-XE - after programming all memory channels have scan skip enabledClosed07/01/2020

Actions
Has duplicate Bug #8043: Yaesu FT-65R scan skip setting switchedClosed07/06/202007/10/2020

Actions
Has duplicate Bug #8057: Yaesu FT-65R Scan Skip settings reveresedClosed07/11/2020

Actions
Actions #1

Updated by Bernhard Hailer about 4 years ago

  • Status changed from New to In Progress
  • Assignee set to Bernhard Hailer
  • Platform changed from Windows to All

Please let me know if this is still an issue. I can look into it.

Actions #2

Updated by John Henderson about 4 years ago

Bernhard Hailer wrote:

Please let me know if this is still an issue. I can look into it.

This is still an issue as of chirp-daily-20200227.

Actions #3

Updated by Bernhard Hailer about 4 years ago

  • Target version set to chirp-legacy

Ok, noted - I will look into it :-)

Actions #4

Updated by Bernhard Hailer almost 4 years ago

Donald or John,
could you do me a favor and test my fix? This is how you can do that:

  1. enable developer mode: help -> check enable developer functions,
  2. load this module: file -> load module, point to the ft4.py you downloaded,
  3. perform radio communication as usual,
  4. test whether the inversion problem is gone.
  5. Let me know. Thanks!
Actions #5

Updated by Gordon Daugherty almost 4 years ago

Hello. I'm not Donald or John but I just ran into this issue, found this ticket, and followed your instructions. Your fix does appear to do the trick.

After downloading and loading your module the channels that were being erroneously marked with 'SKIP' now accurately reflect that they're set to 'SKIP' in the Chirp UI. I used Chirp's slick multi-select / bulk property update function (big thanks to whoever implemented that!) to switch them all from 'SKIP' to blank, uploaded to my radio, and now I'm able to scan my memory channels.

Thank you!

Actions #6

Updated by Bernhard Hailer almost 4 years ago

Excellent! I will submit a patch as soon as I can.

Actions #7

Updated by Bernhard Hailer over 3 years ago

  • % Done changed from 90 to 100
  • Model affected changed from Yaesu FT4-XR to Yaesu FT-4X, FT-4V, FT-25, FT-65

Patch submitted; should be available soon.

Actions #8

Updated by Anonymous over 3 years ago

  • Status changed from In Progress to Closed

Applied in changeset commit:7c1182a3b9e0.

Actions

Also available in: Atom PDF