Bug #6703: BF-8FHP unavailable? - CHIRP

Actions

Copy link

Bug #6703

closed

BF-8FHP unavailable?

Added by Jen Lewis over 5 years ago. Updated over 4 years ago.

Status:

Closed

Priority:

Normal

Assignee:

Category:

Target version:

chirp-legacy

Start date:

04/13/2019

Due date:

% Done:

Estimated time:

Chirp Version:

daily

Model affected:

Baofeng BF-F8HP

Platform:

All

Debug Log:

I read the instructions above:

Description

20190412 version will not clone BF-8FHP. It says "An error has occurred. Radio did not respond". My husband has 201805xx that still works with this radio.

Actions

Copy link

Updated by Bernhard Hailer over 4 years ago

Status changed from New to Feedback
Target version set to chirp-legacy
Model affected changed from BF-8FHP to Baofeng BF-F8HP
Platform changed from Windows to All

Have you been able to resolve this on your own since you submitted this?

This is most likely a cable / driver / connector issue. Please refer to these Wiki articles:
CableGuide
CableGuide FTDI OEM Cables
[RTSystemsCablesAndMavericks]
If there's no solution to be found in any of them, please read: How To Report Issues and provide a debug log. Thank you!

Windows notes: If you are using a generic cable with a Prolific chip, you will very likely need to downgrade your driver to version 3.2.0.0.
It can be found at http://www.miklor.com/COM/UV_Drivers.php

MacOS notes: this OS is apparently very picky about USB to Serial cables. From what I heard, only (genuine) FTDI-based cables can be made work.
You must have the KK7DS Python runtime for Mac OSX installed.

Linux notes: Linux generally is quite good with USB to Serial converter drivers.

Actions

Copy link