Actions
Bug #6309
closedRetevis RT22 will not clone to radio
Start date:
12/18/2018
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
various
Platform:
Windows
I read the instructions above:
Description
I went through 10 radios and I am getting the same massage every time. "unexpected error communicating with the radio". I had the same problem last month and I used a download from here to fix it but this time it didn't work.
Files
Updated by Jim Unroe about 6 years ago
- Status changed from New to Feedback
Scott,
CHIRP is not getting a response from the radio after sending the clone request.
Are you using a known good programming cable (do you successfully program other radios with it)?
If not, does it contain a Prolific type USB-to-TTL chip in it (use Device Manager to fine out)?
If yes, have you downloaded, installed and selected the older Prolific v3.2.0.0 device driver?
Jim KC9HI
Updated by Bernhard Hailer almost 5 years ago
- Status changed from Feedback to Closed
- Priority changed from Immediate to Normal
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Model affected changed from (All models) to various
No more feedback by submitter.
Actions