Actions
Bug #6171
closedBaofeng UV-82HP won't connect
Start date:
10/18/2018
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Baofeng UV-82HP
Platform:
Windows
I read the instructions above:
Description
Hello! Unfortunately my Baofeng UV-82HP won't connect to CHIRP. I always get "radio did not respond" error. I've tried different models in the program but nothing has worked for me. Firmware codes: N812301, 160408N. Driver: 3.8.25.0. At the same time, my UV-5R 8W connects absolutely fine. Please help.
Updated by Bernhard Hailer almost 5 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
Are you using the same cable you're using on your UV-5R 8W? If so, then your connector might not make full contact. Push it in really hard. Possibly you have to shave off some of the connector housing so that you can push it further in.
You also should collect a debug log as described in Wiki: How To Report Issues.
Updated by Bernhard Hailer over 4 years ago
- Status changed from Feedback to Closed
No more feedback by submitter.
Actions