Bug #5643
closedFT-70DR uploads slightly corrupt
0%
Description
I'm using the current daily (20180314) on ubuntu-16.04 with a new Yaesu FT-70DR.
I downloaded from my FT-70DR (configured without chirp). Added some national calling frequencies, repeaters, GMRS stations, and NOAA. Then I uploaded to the radio again.
Memory 1 in chirp is labeled "2MCAL" for the 2m calling frequency (146.520). On the radio it shows "2MCAL". All memories higher than 1 show the frequency instead of the name, which isn't how the radio usually works.
I can upload my memory save image if that's helpful.
Updated by Nicolas Pike almost 7 years ago
Thanks for your feedback. I have just submitted a patch to
_mem.display_tag = 1 # Always Display Memory Name (For the moment..)
This is pending setting a default for new memory entries to be displayed as names, unless set in memory.extras properties.
Updated by Bernhard Hailer almost 5 years ago
- Description updated (diff)
- Status changed from New to Closed
- Target version set to chirp-legacy
- Model affected changed from (All models) to Yaesu FT-70DR
Assuming that the patch made it into repository, this ticket has been closed.
If that's a mistake, please feel free to re-open.