Project

General

Profile

Actions

Bug #5491

open

Changing primary frequency reverts duplex settings

Added by Nikolai Hedler almost 7 years ago. Updated almost 5 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
01/12/2018
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
(All models)
Platform:
All
Debug Log:
I read the instructions above:

Description

When changing the main frequency for a channel, the duplex settings are reset to some sort of default, requiring the user to notice and correct the error if the primary frequency is changed.

Ex: I am programming 5 channels for a satellite, so I create the first one, copy it five times, and then tweak the downlink frequencies to account for Doppler shift. The uplink frequency and mode is reset as soon as I change the downlink frequency, so "split" mode is changed to "-" and the frequency is set to "0.6000" when it should be "435.8000".

Preferred behavior: Allow the main frequency to be set without changing other settings on the channel being changed.

Bug still exists in the current daily (2018-01-04).

Actions #1

Updated by Bernhard Hailer almost 5 years ago

Is this still an issue? Is it a problem with a particular radio (maker/model?), or a generic problem with Chirp?

Actions #2

Updated by Bernhard Hailer almost 5 years ago

  • Status changed from New to Feedback
Actions

Also available in: Atom PDF