Project

General

Profile

Actions

New Model #4881

closed

Yaesu VX-8R

Added by Keith Williamson over 7 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Category:
-
Target version:
Start date:
06/05/2017
Due date:
% Done:

100%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

Current VX8 driver only supports settings for VX-8DR and VX-8GE. This effort adds settings support for stock VX-8R.

Actions #1

Updated by Keith Williamson over 7 years ago

  • % Done changed from 0 to 50

Created patch vx8-4881-1 which lays out initial groundwork by moving all functions that will be needed for settings support from the VXDRadio class up to the VX8Radio class. This patch doesn't change any current behavior.

Actions #2

Updated by Keith Williamson over 7 years ago

  • % Done changed from 50 to 80

Created patch vx8-4881-2 which modifies the memobj aprs struct to accommodate the memory layout differences between the VX-8DR/VX-8GE and VX-8R. This patch provides the remainder of the groundwork necessary to add settings support for the stock VX-8R. This patch doesn't change any current behavior. The next (and hopefully final) patch will provide the actual setting support for the VX-8R.

Actions #3

Updated by Keith Williamson over 7 years ago

Resubmitted patch "vx8-4881-2.patch" as "vx8-4881-3.patch" because of PEP-8 error due to a line that was greater than 79 characters.

Actions #4

Updated by Keith Williamson over 7 years ago

Submitted new patch "vx8-4881-4.patch" against tip since patch "vx8-4881-3.patch" was rejected. Patch "vx8-4881-3.patch" was to be a replacement for patch
"vx8-4881-2.patch" that corrected a PEP-8 line > 79 chars error. However, "vx8-4881-2.patch" was integrated with the error so instead we needed just a new patch against the tip to fix the PEP-8 error. This little patch also corrects a #seekto statement that I had added without the correct padding value (was 0x%0X..corrected to 0x%04X).

Actions #5

Updated by Keith Williamson over 7 years ago

  • % Done changed from 80 to 100

Submitted patch "vx8-4881-5.patch" which adds settings to the VX-8R. All tests
against the VX-8R, VX-8DR, and VX-8GE images files pass including the settings test for the VX-8R.

Actions #6

Updated by Keith Williamson over 7 years ago

  • Status changed from New to Resolved

Resolved with final patch of series (vx-4881-5.patch).

Actions #7

Updated by Bernhard Hailer over 4 years ago

  • Tracker changed from Feature to New Model
  • Subject changed from Add Settings support to stock VX-8R. to Yaesu VX-8R
  • Status changed from Resolved to Closed
  • Chirp Version changed from 0.4.0 to daily
  • Equipment Loan/Gift Offered set to No
Actions

Also available in: Atom PDF