Actions
Bug #4671
closedOFFSET SETTING
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
03/25/2017
Due date:
03/30/2017
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Baofeng BF-F8HP
Platform:
All
I read the instructions above:
Description
i have CHIRP daily-20170222 and Baofeng BF-F8HP. I downloaded the current frequencies from the radio, cleared them from the file, started to write/code/alter the frequencies. Some of them have an offset 4.6 like for 160.65 offset 4.6, but after I input this to the app, it will not retain/store it as it does the frequency, frequency name, ect...
Files
Updated by Jim Unroe over 7 years ago
- Status changed from New to Feedback
Brian,
You have to set Duplex to "-" or "+" (based on if the TX frequency is lower or higher in frequency than the RX frequency) before you can enter an Offset value.
Jim KC9HI
Updated by Bernhard Hailer about 4 years ago
- Status changed from Feedback to Closed
- Model affected changed from bf-f8hp to Baofeng BF-F8HP
- Platform changed from Windows to All
Answer suggested.
Actions