New Model #4517
closedYaesu FTM-3100R
0%
Description
Will the Yaesu FTM-3100D be added or is there a variation I could use to program this radio?
Updated by stephen s over 5 years ago
Tried to use chirp w/FTM-3100 using FTM-3200. Radio did not respond. Please add support for the 3100!
Updated by Gary Ferguson over 4 years ago
Current status of CHIRP for YAESU FTM-3100R? I haven't purchased it yet and probably won't buy it if CHIRP support is unlikely.
Thanks!
Updated by Bernhard Hailer over 4 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
If you got "Radio did not respond", then you might have very well a problem with your cable, driver, or connector.
You should provide a debug log, as described in the Wiki: "How To Report Issues"? Thanks!
If the 3200 driver doesn't work on the 3100, then it's open when the 3100 can be supported. The addition of a new radio to Chirp requires two things:
1) a volunteer developer who takes the task to work on this driver,
2) availability of test equipment, such as a loaner radio (see Rules For Loaning A Radio).
Unfortunately, you need to wait until both conditions have been met.
Or, you could decide to get your hands dirty yourself - check Wiki, "Developers".
Updated by Justin Overfelt about 4 years ago
I can confirm the 3200 driver works for the 3100R. Just tried it today. It seems the 3200 driver only does memories for now - I may look into adding the settings if I have some time in the next few months.
-Justin AB3E
Updated by Bernhard Hailer about 4 years ago
- Status changed from Feedback to Closed
Based on Justin's post above, this ticket will be closed.
Please open a bug report or a feature request if you run into issues.
Updated by Justin Overfelt about 4 years ago
Bernhard -
Will this support be indicated on the front page or in the interface so others know without finding this ticket?
-Justin
Updated by Justin Overfelt about 4 years ago
Ah I see it there on the homepage - looks good!