Project

General

Profile

Actions

Bug #4455

closed

New firmware version on the Leixen VV-898S

Added by Mario G. almost 8 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
01/24/2017
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
Leixen VV-898S
Platform:
Windows
Debug Log:
I read the instructions above:

Description

I wanted to programm my Leixen VV-898S and it didn't worked. The memory can't read out correctly.

According to http://www.miklor.com/VV898S/VV898S-NewModel.php there is a new firmware version out, which isn't supported by Chirp.

I've tested a bit around and found out, if I select "Jetstream JT270MH" it can read out the memory correct, but I can only select 2 power levels not 3 levels as should be.

I hope, this problem can be easily fixed and I can program my Leixen.


Related issues 1 (0 open1 closed)

Is duplicate of Bug #4069: Memories upload to unexpected locations on Leixen VV-898SClosedBrian Dickman09/25/2016

Actions
Actions #1

Updated by Mark Jeffs almost 8 years ago

Discussion about this here: [[[http://chirp.danplanet.com/issues/4069]]]

Actions #2

Updated by Bernhard Hailer over 4 years ago

  • Tracker changed from New Model to Bug
  • Status changed from New to Closed
  • Model affected set to Leixen VV-898S
  • Platform set to Windows

Duplicates #4069. Please follow and post there. Thanks!

Actions

Also available in: Atom PDF