Bug #3965
closedUV-6R UHF RECEİVER PROBLEM
0%
Description
----errors----
1)Squelch can not be set
2)frequency range can not be extended
3)ponmsg (lcd message) can not be programmed
4)uhf software ıssue :( poor sensitivity --- UHF-VHF TX GOOD VHF rx very good but uhf rx very poor :( ¶
software, such as UV-5R should be stable.......
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Updated by Jim Unroe about 8 years ago
- Status changed from New to Feedback
taha sinan wrote:
----errors----
1)Squelch can not be set
I just programmed the squelch level setting in the Basic Settings menu and a squelch threshold setting in the Service Settings menu. Both programmed fine.
2)frequency range can not be extended
This is by design. The UV-6R driver is programmed to match the factory band limits.
3)ponmsg (lcd message) can not be programmed
I just changed the power-on message of my radio. No issues.
4)uhf software ıssue :( poor sensitivity --- UHF-VHF TX GOOD VHF rx very good but uhf rx very poor :(
This sounds like a hardware problem. Maybe a defective antenna.
software, such as UV-5R should be stable.......
This is not a UV-5R. If it was the same as (or similar to) a UV-5R (like a UV-6, BF-F8HP, UV-82, etc.) it would have been supported by CHIRP long ago. This radio, so far, is unique and has its own driver.
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Unless you can provide more details as you why you think these settings are not working, I don't know how I can help you. You haven't pointed out any of the known issues. The issues that you are having cannot be duplicated by me.
Known issues:
- The power level setting is inverted. A patch has been submitted.
- The radio only supports 6 character channel names and CHIRP allows 7 characters (like a UV-5R, BF-F8HP, UV-82) to be entered. A patch has been submitted.
In the mean time you can upload the backup image that you made from your 1st successful download. That will put the radio back into the exact same condition it was before you made any changes using CHIRP. A link to a copy of the OEM software is on miklor.com
Jim KC9HI
Updated by taha sinan about 8 years ago
dear jim thank you :)
frequency can be expanded with the original software can be expanded frequency chirp Is it possible to add a ---Is it possible to add it to chirp software?
128-286 MHz, 400-573 MHz can be expanded with the original software (rx-tx) range...
Is it possible to add this feature a chirp ? :) thank you jimm
Updated by darky mtp about 7 years ago
1)Squelch can not be set
I agree. In service Settings, if you change squelch levels, upload settings and download, you will see old values (ranging from 15 to 23).
2)frequency range can not be extended
Modifying upper and lower limits is ignored. Using official software you can do it.
3)ponmsg (lcd message) can not be programmed
Same behaviour. You can read values from radio but not upload them. Official software can.
4)channel name is still limited to 6 characters.
I'm using CHIRP daily-20171104
UV-6R 16.12
HDBF230
Updated by Bernhard Hailer almost 5 years ago
- Status changed from Feedback to Closed
- Assignee deleted (
Jim Unroe) - Priority changed from Urgent to Normal
- Model affected changed from UV-6R to Baofeng / Pofung UV-6R
No more traffic on this ticket.
#6369 contains an explanation what's gouing on, covering most of what is discussed here.