Bug #3685
closedYaesu VX-170 downloads but won't upload
0%
Description
Yaesu VX-170 downloads fine but won't upload. Error message is either "Error reading echo" or "Radio did not ack block 0".
Updated by Bernhard Hailer about 4 years ago
- Status changed from New to Feedback
- Target version set to chirp-legacy
- Chirp Version changed from 0.4.0 to daily
- Platform changed from Windows to All
Have you been able to resolve this on your own since you submitted this?
Have you tried with a recent version since you submitted this?
If you haven't, and if you're still having this issue, please refer to the Wiki "How To Report Issues" and provide a debug log. Thanks!
Updated by Bernhard Hailer over 3 years ago
- Status changed from Feedback to Closed
No more feedback by submitter. However:
This looks like a cable / driver / connector issue. Please refer to these Wiki articles:
CableGuide
CableGuide FTDI OEM Cables
[RTSystemsCablesAndMavericks]
If there's no solution to be found in any of them, please read: How To Report Issues and provide a debug log. Thank you!
Windows notes: If you are using a generic cable with a Prolific chip, you will very likely need to downgrade your driver to version 3.2.0.0.
It can be found at http://www.miklor.com/COM/UV_Drivers.php
MacOS notes: this OS is apparently very picky about USB to Serial cables. From what I heard, only (genuine) FTDI-based cables can be made work.
You must have the KK7DS Python runtime for Mac OSX installed.
Also see MacOS Tips!
Linux notes: Linux generally is quite good with USB to Serial converter drivers. The most likely cause for grief is a connector which doesn't provide good electrical contact.
Bluetooth notes: connections often suffer from timing issues, please try a cable instead.