Project

General

Profile

Actions

Bug #2933

open

Uploading to FT-857D - "Radio did not ack block 0" via Bluetooth

Added by William Hirsch about 9 years ago. Updated over 8 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
10/20/2015
Due date:
% Done:

0%

Estimated time:
Chirp Version:
daily
Model affected:
FT-857D
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Via a USB cable I was able to upload to and download from my FT-857D.

On the same machine, several days later, I connected a previously tested Bluetooth CAT adapter to my radio and established a connection to said adapter with my laptop's USB/BT adapter. Using the appropriate port I was able to download the radio data to Chirp with no issue. I then attempted to upload the attached image, however get "Radio did not ack block 0" on every attempt. I have attempted via both the incoming and outgoing port.

Image and log attached.


Files

chirp_south_florida.img (7.31 KB) chirp_south_florida.img William Hirsch, 10/20/2015 11:42 AM
debug.log (22.3 KB) debug.log William Hirsch, 10/20/2015 11:42 AM

Related issues 1 (1 open0 closed)

Related to Bug #7863: Failed to communicate with radio: Radio did not ack block 0 [FT-818 w/ Bluetooth]Feedback05/08/2020

Actions
Actions #1

Updated by Stu Gee over 8 years ago

Exact issue for me also.

Did you get this solved?

Actions #2

Updated by Stu Gee over 8 years ago

UPDATE: it is a timing issue.
After a bit of rapid pressing on button A on the Yeasu At the right time ever after it said "error" - I got it to work ... however this is a bug...

Actions

Also available in: Atom PDF