Bug #2859: Baofeng UV5RA Unable to Program anything in 400-480 Bands - CHIRP

Actions

Copy link

Bug #2859

closed

Baofeng UV5RA Unable to Program anything in 400-480 Bands

Added by Caleb Bennett about 9 years ago. Updated about 9 years ago.

Status:

Closed

Priority:

Low

Assignee:

Category:

Target version:

0.4.1

Start date:

09/18/2015

Due date:

% Done:

Estimated time:

Chirp Version:

0.4.0

Model affected:

Baofeng UV5RA

Platform:

Linux

Debug Log:

I read the instructions above:

Description

I'm running Chirp on Linux Mint 17.2 and for some reason when I try to program anything in 400mhz-480mhz range I get the error.
"Error setting memory: Frequency 453.66250 is out of supported range"
When I download from the Radio it has channels like 456.525000 so is there any reason I shouldn't be able to program something like 453.66250 or 460.25000

In order to Download and Upload to the Radio I do have to run chirp as root.
Could this be the problem?

Thanks,

Actions

Copy link

Updated by Jim Unroe about 9 years ago

Status changed from New to Feedback

Caleb,

There are 2 possibilities.

You have a VHF/220 radio.
You have a VHF/UHF but the memory configuration is setup for VHF/220. Basically your radio is telling CHIRP it's second band is 220 MHz. I seen this several times recently.

If it is number 1, you won't be able to use your radio for 400-520 MHz frequencies. If it is number 2, I can help you switch your radio to the proper bands. Contact me at uv5ra@kc9hi.net and include a freshly downloaded and saved CHIRP Radio Image so I can tell for sure if it is #1 or #2.

You have to run CHIRP as "root" because you have not added your Linux Mint user to the "dialout" group.

Jim KC9HI

Actions

Copy link