Actions
Bug #2849
closedBaofeng BF-F9 V2+ Firmware BFP3-25 Changing Can not make specific channels non-transmitable (listen only)
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
09/11/2015
Due date:
% Done:
0%
Estimated time:
Chirp Version:
daily
Model affected:
Baofeng BF-F9V2+
Platform:
Windows
I read the instructions above:
Description
I have tried the two following things I have seen suggested.
Changing Duplex for said channel to off. Still transmits on said channel (I can hear it on another radio tuned to the same frequency.)
Changing Duplex for said channel to split and trying to set offset to 0.0 gives the following error; "Error setting memory: Tx freq 0.000000 is out of supported range"
Updated by Jim Unroe almost 10 years ago
- Status changed from New to Incomplete
Taylor,
You must be doing something wrong. Setting "Duplex" to "off" is the correct way to program a receive only (TX locked out) channel.
Please attach the CHIRP Radio Image (*.img) file that you are using and I will take a look at it.
Jim KC9HI
Updated by Bernhard Hailer over 5 years ago
- Status changed from Incomplete to Closed
- Model affected changed from BF-F9 V2+ to Baofeng BF-F9V2+
No more feedback by submitter.
Actions