Project

General

Profile

Actions

Bug #2321

closed

CHIRP Does Not Clone the Offset Field to my Baofeng

Added by Ed Gelb over 9 years ago. Updated over 5 years ago.

Status:
Rejected
Priority:
High
Assignee:
-
Category:
-
Target version:
Start date:
02/16/2015
Due date:
% Done:

0%

Estimated time:
Chirp Version:
0.4.0
Model affected:
Baofeng BF-F8+ UV-5R
Platform:
Windows
Debug Log:
I read the instructions above:

Description

Chirp Version is 0.4.1 Baofeng BF-F8+ UV-5R 2nd Generation Unit. Windows Vista 32 software. Clone process does not download offset 0.6000 to unit. Menu 26 on unit always shows 000.000 reading instead of correct offset.


Related issues 1 (0 open1 closed)

Is duplicate of Bug #2161: Baofeng UV-5RAClosed01/04/2015

Actions
Actions #1

Updated by Jim Unroe over 9 years ago

  • Status changed from New to Rejected

Hi Ed,

The UV-5R and is many variants do not use shifts or offsets to define its memory channels. Only the RX frequency and TX frequency are used. Because of this, menu 25 (SFT-D) and menu 26 (OFFSET) only have a purpose in VFO mode. CHIRP lets you use the Duplex and Offset settings to define the channel, but CHIRP then converts these values in the background to the RX frequency and TX frequency because that is what the radio uses. When the TX frequency differs from the RX frequency, the radio's upper status display indicates "+-" (repeater, odd-split, cross-band and TX inhibited). This is not a problem with CHIRP or your radio. This is just how the radio works.

"Reference for UV-5R Menus":http://www.miklor.com/COM/kc9hi/5RMenus.pdf

Jim KC9HI

Actions #2

Updated by M T over 5 years ago

Duplicate of 2161?

Actions #3

Updated by M T over 5 years ago

Sorry #2161 (forgot auto-linking markup).

Actions

Also available in: Atom PDF