Actions
Bug #1917
closed[UV-B5] Settings 'STE' and 'beep prompt' invert when changing setting 'save mode'
Start date:
09/20/2014
Due date:
% Done:
100%
Estimated time:
Chirp Version:
daily
Model affected:
UV-B5
Platform:
All
I read the instructions above:
Description
When I change the setting 'save mode', two other settings ('STE' and 'beep prompt') change too.
In the code I see those two settings are a bit special, in hardware you have to set a bit to disable them.
There seems to be logic present already to handle this, but the mechanism does not fully work apparently.
To reproduce:
- Disable 'STE' and 'beep prompt' manually on the radio. Enable 'save mode' manually on the radio.
- Download from the radio in chirp
- Change setting 'save mode' from off to on.
- Upload to the radio in chirp
- Download from the radio in chirp again
- Observe that the settings 'STE' and 'beep prompt' are now enabled.
- Observe that the 'beep prompt' icon on the radio display is showing.
Updated by Jim Unroe over 10 years ago
- Status changed from New to In Progress
- Assignee set to Jim Unroe
- Target version set to 0.4.1
- % Done changed from 0 to 100
- Model affected changed from (All models) to UV-B5
- Platform changed from Linux to All
Bertrik,
Thanks for the clear and concise steps to reproduce this bug. A patch will be submitted soon.
Jim KC9HI
Updated by Bertrik Sikken over 10 years ago
I confirm it works as expected now, thanks for the quick fix!
Updated by Jim Unroe over 10 years ago
- Status changed from In Progress to Closed
New daily build is out
Actions