Project

General

Profile

Actions
Copy link

New Model #1225

open

Baofeng UV-8, UV-8D

Added by Kenneth Guilford about 11 years ago. Updated about 3 years ago.

Status:
Feedback
Priority:
Normal
Assignee:
-
Category:
-
Target version:
chirp-legacy
Start date:
11/08/2013
Due date:
% Done:

0%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:

Description

Baofeng has a new model out, The UV-8. I recently purchased one only to discover there is no software available for it yet (to my knowledge anyway). I would love to see this model added to the CHIRP functionality.

Files

Download all files
UV8_20140923.LOG (2.02 MB) UV8_20140923.LOG Carlos Marquez, 09/23/2014 09:04 PM
UV8_20140923.dat (37.6 KB) UV8_20140923.dat Carlos Marquez, 09/23/2014 09:06 PM
uv5r.py (55.8 KB) uv5r.py Temporary test driver for reading BaoFeng UV-8 Jim Unroe, 09/24/2014 02:40 AM
debug_uv8_0924.log (6.6 KB) debug_uv8_0924.log Carlos Marquez, 09/24/2014 09:59 PM
UV8_0924.LOG (13.6 KB) UV8_0924.LOG Carlos Marquez, 09/24/2014 10:02 PM
debug_UV8_0925(2).log (6.95 KB) debug_UV8_0925(2).log Carlos Marquez, 09/25/2014 09:44 AM
portmon_UV8_0925.LOG (7.91 KB) portmon_UV8_0925.LOG Carlos Marquez, 09/25/2014 09:44 AM
debug_uv8_0925.log (5.81 KB) debug_uv8_0925.log Carlos Marquez, 09/25/2014 09:45 AM
uv5r.py (55.9 KB) uv5r.py Temporary test driver for reading BaoFeng UV-8 - #2 Jim Unroe, 09/25/2014 10:25 AM
debug_UV8_0925W7.log (5.88 KB) debug_UV8_0925W7.log Carlos Marquez, 09/25/2014 02:33 PM
uv5r.py (55.8 KB) uv5r.py Temporary test driver for reading BaoFeng UV-8 - #3 Jim Unroe, 09/25/2014 04:20 PM
debug_UV8_0925_xp.log (7.93 KB) debug_UV8_0925_xp.log Carlos Marquez, 09/25/2014 08:56 PM
uv5r.py (56.7 KB) uv5r.py Temporary test driver for reading BaoFeng UV-8 - #4 Jim Unroe, 09/26/2014 02:10 AM
debug_uv8_test_20140926.log (151 KB) debug_uv8_test_20140926.log Carlos Marquez, 09/26/2014 09:58 AM
UV-8_test_20140926.img (6.32 KB) UV-8_test_20140926.img Carlos Marquez, 09/26/2014 09:58 AM
debug_UV8_0928.log (123 KB) debug_UV8_0928.log Carlos Marquez, 09/28/2014 08:22 PM

Related issues 1 (0 open — 1 closed)

Has duplicate New Model #4519: Baofeng / Pofung UV-8dClosed02/12/2017

Actions
Actions
Copy link
 #1

Updated by Kenneth Guilford about 11 years ago

I am more than willing to offer/loan my UV-8 for development purposes. -Ken 951-901-5076

Actions
Copy link
 #2

Updated by Jim Unroe about 11 years ago

  • Assignee set to Jim Unroe
  • Target version set to 0.4.0
  • Chirp Version changed from 0.3.0 to daily

Kenneth,

The OEM software for the UV-8 (as well as other Baofeng radios) is available on the Miklor.com website.

If you have a 32-bit windows computer available to install and use this OEM software on, it would be great if you could capture a download session from it using Portmon (link below) and post it here.

http://technet.microsoft.com/en-us/sysinternals/bb896644.aspx

The UV-8 looks very similar to a UV-82 with the LCD display and keypad removed. The UV-82, as it relates to computer programming, is nearly identical to the UV-5R. The OEM software appears to be the same as the UV-82/5R OEM software except the settings that would require a display and keypad to access have been removed. My UV-5R .dat file loads into the UV-8 software just fine and it appears that most of the settings are recognized.

It is my feeling that with the port capture alone, we may be able to get CHIRP talking to the UV-8. And then if you would assist, there may be a half a dozen or so settings that may have to figured out.

Jim KC9HI

Actions
Copy link
 #4

Updated by Carlos Marquez about 10 years ago

Jim,
I just got this radio. I hope these help you do your magic.

Actions
Copy link
 #5

Updated by Jim Unroe about 10 years ago

Carlos,

Save the attached uv5r.py file to where you normally save your .img files
In the "Help" menu, enable "Enable Developer Support"
In the "File" menu, choose "Load Module" and load the file saved in the first step

Now try to download from the UV-8 using Vendor: Baofeng / Model: UV-6

If downloading works, then attach the .img file saved from your radio so I can figure out the rest of what is needed.

Jim KC9HI

Actions
Copy link
 #6

Updated by Carlos Marquez about 10 years ago

Jim,
No luck, "radio refused to clone".

Actions
Copy link
 #8

Updated by Jim Unroe about 10 years ago

Carlos,

The last debug.log you attached did not show the new "ident" being sent. Are you sure you had the test uv5r.py module loaded? It will have to be loaded every time you launch CHIRP.

Jim

Actions
Copy link
 #9

Updated by Carlos Marquez about 10 years ago

I tried several times but I can't tell if it's loading correctly.

Actions
Copy link
 #12

Updated by Jim Unroe about 10 years ago

Carlos,
Now we are getting somewhere. Try this to see if you can get a little further.
Jim

Actions
Copy link
 #13

Updated by Carlos Marquez about 10 years ago

Jim,
I don't have my 32-bit XP laptop with me so I tried it on W7 with this result.

Actions
Copy link
 #14

Updated by Jim Unroe about 10 years ago

Carlos,
Thanks. Try this.
Jim

Actions
Copy link
 #15

Updated by Carlos Marquez about 10 years ago

Jim,
Getting closer, but still no success. For future reference does it matter if I try these *.py modules on 32 or 64 bit? Do you need anything other than the debug log?

Actions
Copy link
 #16

Updated by Jim Unroe about 10 years ago

Carlos,

You can try these modules on 32 or 64-bit Windows. Right now the debug.log is providing me with what I need.

Give this a try. Notice that there is now a UV-8 model selection. Don't use UV6 any more. Also, If you get CHIRP to download from your radio. DO NOT EDIT ANYTHING OR UPLOAD TO YOUR RADIO. Immediately save to a .img file and attach it here. I will need to review it and consult with others as to the proper way to deal with the odd nature of this radio.

Jim

Actions
Copy link Download all files
 #17

Updated by Carlos Marquez about 10 years ago

It worked but you should look at the debug log. It didn't work the first time I selected UV8. Since it didn't work using UV8 I tried UV6 then UV82 then UV8 again and it worked.

Actions
Copy link
 #18

Updated by Jim Unroe about 10 years ago

Carlos,

Would you try this again using the UV-8 selection first. I am unable to see why it would require the UV-6 and UV-82 attempts first.

Jim

Actions
Copy link
 #19

Updated by Carlos Marquez about 10 years ago

Jim,
I couldn't recreate what happened that time. It worked right each time I started Chirp and loaded the module. Must have been user error on my part somehow.

Actions
Copy link
 #20

Updated by Carlos Marquez about 10 years ago

Is there anything else I can do for you?

Actions
Copy link
 #21

Updated by Jim Unroe about 10 years ago

  • Target version changed from 0.4.0 to 0.4.1

Carlos,

No. Not at this time. I think I have a handle on the problem. S C has the same problem with a UV-6 radio. I'm not yet sure how to go about fixing it. I have started a discussion in the developer email list to see if we can come up with a solution that will work without breaking things for the currently supported radios.

Jim

Actions
Copy link
 #22

Updated by Kirk Lewis about 9 years ago

Hi Jim. I just joined the group and have added a few UV8's to play with my 888s's. Has any progress been made with adding this unit to CHIRP? I would also be willing to send you one of the UV8's for testing and development. Thanks Kirk

Actions
Copy link
 #23

Updated by Gilles Rosenkranz almost 7 years ago

Hi,

Had you connect your BF UV-8D?

Actions
Copy link
 #24

Updated by Danny Terweij over 5 years ago

Hello why model still not in chirp. Baofeng says that they support chirp. So my guess is that if you need data you Should contact baofeng for all model data. I don't like much old software to program diff kind of baofeng. One tool is better.

Actions
Copy link
 #25

Updated by Barry Nelson almost 5 years ago

I see the ticket says "equipment loan offered" = no, but I see in the messages here a couple people offering to loan radios. I am curious, what is the status? I don't see any recent activity. I don't have this model, I am inquiring for someone else.

Actions
Copy link
 #26

Updated by Bernhard Hailer over 4 years ago

  • Target version changed from 0.4.1 to chirp-legacy

The Wiki lists the UV-8R as supported, and it suggests to use the UV-82HP setting to communicate. Please try this out and let us know.

Actions
Copy link
 #27

Updated by Jim Unroe over 4 years ago

Bernhard Hailer wrote:

The Wiki lists the UV-8R as supported, and it suggests to use the UV-82HP setting to communicate. Please try this out and let us know.

The UV-8 and UV-8D are in a class by themselves. I was given a UV-8D and have spent many hours working on it. I have not been able to "crack" how the radio knows which channels are empty and which channels are programmed. It does not function the same as the UV-82 that it resembles. I set this project aside because I am at a loss as to how to overcome the issue. This is a shame because all other functionality is done.

Jim KC9HI

Actions
Copy link
 #28

Updated by Bernhard Hailer over 4 years ago

  • Subject changed from Baofeng UV-8 to Baofeng UV-8D
  • Status changed from New to Feedback

(Changed title)

Actions
Copy link
 #29

Updated by Bernhard Hailer over 4 years ago

  • Subject changed from Baofeng UV-8D to Baofeng UV-8, UV-8D
Actions
Copy link
 #30

Updated by Gustavo V. over 4 years ago

Bernhard Hailer wrote:

The Wiki lists the UV-8R as supported, and it suggests to use the UV-82HP setting to communicate. Please try this out and let us know.

Unsuccessful. Offer one brand new for free so we can have this model supported.

Actions
Copy link
 #31

Updated by Mark Jack about 3 years ago

Jim Unroe wrote:

Bernhard Hailer wrote:

The Wiki lists the UV-8R as supported, and it suggests to use the UV-82HP setting to communicate. Please try this out and let us know.

The UV-8 and UV-8D are in a class by themselves. I was given a UV-8D and have spent many hours working on it. I have not been able to "crack" how the radio knows which channels are empty and which channels are programmed. It does not function the same as the UV-82 that it resembles. I set this project aside because I am at a loss as to how to overcome the issue. This is a shame because all other functionality is done.

Jim KC9HI

Hi, I have a UV-8D and I'm having trouble writing to the handset with the Baofang software. Did you get anywhere with "cracking" it?

Actions
Copy link
 #32

Updated by Jim Unroe about 3 years ago

  • Assignee deleted (Jim Unroe)

No. I haven't had a chance to mess with it.

Jim KC9HI

Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC