Project

General

Profile

Actions
Copy link

New Model #11477

open

Support of IRadio UV5118 Plus

Added by Gregg Lebovitz 3 months ago. Updated about 2 months ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
08/13/2024
Due date:
% Done:

0%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:
Yes

Description

This is a different radio than the UV5118 and is not compatible. I am working with the iRadio engineers and they can provide help.
I will begin to sell these radios at the beginning of September.

Files

Download all files
Ruyage_UV58Plus_20240930.img (40.2 KB) Ruyage_UV58Plus_20240930.img Gregg Lebovitz, 09/30/2024 05:35 PM
uv5118plus.img (40 KB) uv5118plus.img Gregg Lebovitz, 10/01/2024 11:02 AM
odbfavicon.ico (7.7 KB) odbfavicon.ico Gregg Lebovitz, 10/04/2024 04:37 AM
Actions
Copy link
 #1

Updated by Gregg Lebovitz 3 months ago

I can offer a loan/gift.

Actions
Copy link
 #2

Updated by Gregg Lebovitz about 2 months ago

Is someone interested in working on this. Same radio as the radtel 890. Happy to donate radios to the cause.

Actions
Copy link
 #3

Updated by Jim Unroe about 2 months ago

Attempt to download from this radio using the Vendor: Ruyage / Model: UV58Plus selections. If it works, attach the downloaded CHIRP Radio Images (*.img) file. If it doesn't, attach the debug.log file.

Actions
Copy link
 #4

Updated by Gregg Lebovitz about 2 months ago

Was able to download the img file from the radio. It is attached.

Actions
Copy link
 #5

Updated by Gregg Lebovitz about 2 months ago

The file from the radio had issues. It found the radio set to use DCS for two channels and had invalid DCS codes (777). The radio was not using DCS. My radio is running version 1.7 of the IRadio firmware. This is the same radio as the radtel 890.

Actions
Copy link
 #6

Updated by Gregg Lebovitz about 2 months ago

Also, I am willing to gift a radio to the effort if it helps.

Actions
Copy link
 #7

Updated by Jim Unroe about 2 months ago

I developed the original driver. I probably could add the iradio UV-5118 Plus but I couldn't make any promises if or when it would be available.

Also I would need a link to the iradio factory software.

Actions
Copy link
 #8

Updated by Jim Unroe about 2 months ago

Also attach the data file from the factory software pulled from the same radio with the same settings as the *.img file was downloaded.

Actions
Copy link
 #9

Updated by Gregg Lebovitz about 2 months ago

attached is the image from the radio downloaded with factory software.

The factory software can be found at my onedrive site. The company does not put the software online.

https://1drv.ms/u/s!AgBv7Qhr0hIXgoUvB3U8MCHRlHEaXQ?e=Z0UT57

Actions
Copy link
 #11

Updated by Jim Unroe about 2 months ago

This new link appears to be bad. Is this the same software? I already downloaded it from the previous link.

Actions
Copy link
 #12

Updated by Gregg Lebovitz about 2 months ago

I will post a new link. Same software. The old link was marked writable and I replaced it. Perhaps that is needed.

https://1drv.ms/u/c/1712d26b08ed6f00/Ee2LpqPnVV1Dg3R4mF2bBg0BuscodRToArsWSgBe4SVZJA

Microsoft OneDrive 1drv.ms
https://1drv.ms/u/c/1712d26b08ed6f00/Ee2LpqPnVV1Dg3R4mF2bBg0BuscodRToArsWSgBe4SVZJA

Sent from my iPhone

On Oct 3, 2024, at 10:07 PM, Jim Unroe redmine@chirpmyradio.com wrote:



Actions
Copy link
 #13

Updated by Gregg Lebovitz about 2 months ago

Same software though

Actions
Copy link
 #14

Updated by Gregg Lebovitz about 2 months ago

I can send you a radio if that would help.

Gregg

Sent from my iPhone

On Oct 3, 2024, at 10:07 PM, Jim Unroe redmine@chirpmyradio.com wrote:



Actions
Copy link

Also available in: Atom PDF

Copyright 2023 CHIRP Software LLC