Bug #11369
openChirp not loading from TYT TH-9800
0%
Description
Running Windows 11 on dell i7 2TB SSD, 64GB memory
Fresh install of latest Chirp
Initial download from TYT TH-9800
Failed to communicate with the radio: NAKed block
No radio image downloaded
Files
| Driver General 20240603.png (603 KB) Driver General 20240603.png | |||
| Driver events 20240603.png (628 KB) Driver events 20240603.png | |||
| Driver Settings 20240603.png (598 KB) Driver Settings 20240603.png | |||
| Chirp NAKed block fault 20240603.jpg (75.6 KB) Chirp NAKed block fault 20240603.jpg | |||
| Chirp NAKed block fault 20240603.jpg (75.6 KB) Chirp NAKed block fault 20240603.jpg | |||
| 20240603_183105.jpg (239 KB) 20240603_183105.jpg | |||
| 20240603_181159.jpg (249 KB) 20240603_181159.jpg | |||
| 20240603_181227.jpg (217 KB) 20240603_181227.jpg | |||
| Comm10.jpg (46.1 KB) Comm10.jpg | |||
| Port Settings.jpg (99.1 KB) Port Settings.jpg | |||
| Driver details.jpg (110 KB) Driver details.jpg | |||
| DeviceEvents.jpg (77.1 KB) DeviceEvents.jpg |
Updated by Jim Unroe 4 months ago
Are you sure you are plugged into the correct port on the radio? I has a similar issue with a TYT TH-8600. I was plugging my programming cable into the mic port. I was mistakenly thinking that it was a dual/purpose port like many other radios that I have used. I finally realized that the data port was on the side of the radio. Once I started using the correct, all was good.
Updated by Stan DeGroff 4 months ago
- File Chirp NAKed block fault 20240603.jpg Chirp NAKed block fault 20240603.jpg added
- File 20240603_183105.jpg 20240603_183105.jpg added
- File 20240603_181159.jpg 20240603_181159.jpg added
- File 20240603_181227.jpg 20240603_181227.jpg added
- File Comm10.jpg Comm10.jpg added
- File Port Settings.jpg Port Settings.jpg added
- File Driver details.jpg Driver details.jpg added
- File DeviceEvents.jpg DeviceEvents.jpg added
Data starts to download, but it stops with the NAKed fault randomly
between the beginning and 1/3 of the way through. I think the fault
needs to be analyzed to see what throws that error.
Sounds like a timeout on an expected acknowledgment???
Port on radio is correct and fully engaged :
Port on computer is fully engaged in usb-3 slot:
Port shows up as comm10 after plugging in usb cable :
Driver shows up on ports as comm 10:
Port Settings and advanced settings:
Driver details:
Port Events LOG:
Anything else ???
Stan W8SRD
419-345-4865
On 6/3/2024 3:34 PM, Jim Unroe wrote: