Bug #11183
closedSettings Blank and Error after D/L from UV-5X3
100%
Description
Attempting to download default configuration from a BTECH UV-5X3 using the BTECH PC03 FTDI Cable to a M2 MacBook Air using CHIRP next-20240217. Going to the Settings tab produces an error of "An Error Has Occurred Found - invalid BCD Encoding" and upon hitting "OK", the settings tab is blank.
Files
Updated by Mikel Stous 10 months ago
- File chirp_debug-lvha3ol0.txt chirp_debug-lvha3ol0.txt added
Same issue with a fresh UV-5x3 and daily next-20240224.
Reset did not fix this for me. Tried a second time. No go.
I pushed an old image to the radio. And then a new download worked.
Work Mode Settings -> VFO A VHF2=220.000 and VFO B VHF2=220.00
Did a reset on the radio. Can download again.
Work Mode Settings -> VFO A VHF2=blank and VFO B VHF2=blank
Updated by Jim Unroe 10 months ago
The BTech UV-5X3 ships with invalid values in the sub-VFOs for several bands. Once you have saved your first successful download as a backup, take the radio and switch to VFO mode. Key in any valid frequency for all 3 bands. Then to the same thing for the other VFO. Now you should be able to download from your radio all should be good.
I will look into seeing if I can get CHIRP to handle this factory mistake more gracefully.
Updated by Anonymous 10 months ago
- Status changed from New to Closed
- % Done changed from 0 to 100
Applied in changeset github|20ece0b0a9064fca6e860eae49a0c59ea5709f93.