Project

General

Profile

Actions

New Model #10991

closed

Baofeng 5RM

Added by Ty Lu about 1 year ago. Updated 12 months ago.

Status:
Closed
Priority:
Normal
Category:
-
Target version:
-
Start date:
12/06/2023
Due date:
% Done:

100%

Estimated time:
Equipment Loan/Gift Offered:
No
I read the instructions above:
Yes

Description

This is a new tri-band radio. Looks like the old UV-5R but much bigger. So far I was able to get the latest version of CHIRP to read and write to the radio using the Baofeng UV-17Pro from the menu. On CHIRP, it list the Channel 0-999, but once you write to the radio. Channel 1 on CHIRP is Channel 2 on the radio.


Files

Baofeng_5RM_stock_20231206.img (33.1 KB) Baofeng_5RM_stock_20231206.img Ty Lu, 12/06/2023 07:59 PM
Actions #1

Updated by Sander van der Wel about 1 year ago

  • Assignee set to Sander van der Wel

I'll add this radio to the driver, with added support for airband.

Actions #2

Updated by Sander van der Wel about 1 year ago

  • Status changed from New to Closed
  • % Done changed from 0 to 100
Actions #3

Updated by Marty Y 12 months ago

Is it possible for Chirp to disable the TX for UHF/VHF on the 5RM? Similar to the UV-5R and similar models.

Actions #4

Updated by Jim Unroe 12 months ago

Marty Y wrote in #note-3:

Is it possible for Chirp to disable the TX for UHF/VHF on the 5RM? Similar to the UV-5R and similar models.

The 5RM should already supports this ability. Like any other radio that supports the disabling of TX, you set the Duplex field in CHIRP to 'off'. If setting this field does not result in TX being disabled, then the radio doesn't support the disabling of TX (at least in the manner of how the UV-5R and similar models typically do).

Actions #5

Updated by Marty Y 12 months ago

Thank you for such a quick reply. Very new to radios and Chirp, but I see what you mean about editing the duplex field on the memories tab. This should do the trick. If in VFO mode with a direct entry of said frequency, would it allow transmit? I will test tomorrow to confirm. Thank you.

Actions #6

Updated by Jim Unroe 12 months ago

Marty Y wrote in #note-5:

Thank you for such a quick reply. Very new to radios and Chirp, but I see what you mean about editing the duplex field on the memories tab. This should do the trick. If in VFO mode with a direct entry of said frequency, would it allow transmit? I will test tomorrow to confirm. Thank you.

This is a system for bug tracking and requesting features. Please use the CHIRP_users mailing list or and appropriate group/forum for your radio to ask questions about the use of CHIRP and/or your radio.

Also this ticked was resolved and closed. Your issue is unrelated. If you have a bug to report or a feature to request, please open a new ticket instead of trying to piggyback on this one.

Actions

Also available in: Atom PDF