New Model #10281
open
Added by Paul Dyke almost 2 years ago.
Updated 12 months ago.
Equipment Loan/Gift Offered:
Yes
I read the instructions above:
Description
Are there any plans to add the Baofeng BF-88ST Pro to the list of supported radios?
- Status changed from New to Feedback
Usually a volunteer developer needs physical access to a radio and the factory programming software to do the reverse engineering. I've done quite a few Baofeng radios, but I usually have to wait until a user or dealer generously donates one.
With a little luck, there might be a possibility that physical possession of a BF-88ST/BF-88ST PRO won't be required. To determine this, my questions would be...
1 What is the difference between the BF-88ST and BF-88ST PRO?
2 Have you tried to read/download from the radio using the Vendor: Baofeng / Model: BF-888 selections?
Jim KC9HI
Jim Unroe wrote in #note-1:
Usually a volunteer developer needs physical access to a radio and the factory programming software to do the reverse engineering. I've done quite a few Baofeng radios, but I usually have to wait until a user or dealer generously donates one.
With a little luck, there might be a possibility that physical possession of a BF-88ST/BF-88ST PRO won't be required. To determine this, my questions would be...
1 What is the difference between the BF-88ST and BF-88ST PRO?
2 Have you tried to read/download from the radio using the Vendor: Baofeng / Model: BF-888 selections?
Jim KC9HI
Jim,
The difference between the BF-88St and the BF-88St PRO is the Pro has a LCD display. I have tried the vendor software for BF-888S and that doesn't work, I did also find a vendor software for the BF-88ST and that doesn't work either.it fails at the handshake. Any suggestions appreciated.
Paul, G2PA
Paul Dyke wrote:
Are there any plans to add the Baofeng BF-88ST Pro to the list of supported radios?
estamos realmente esperando que exista la posibilidad de programar este radio ya que no hay por ahora ningun software parea poder hacerlo..
Also available in: Atom
PDF