Project

General

Profile

Feature #10505 » uv5r_10505.py

Jim Unroe, 09/09/2023 12:47 PM

 
# Copyright 2012 Dan Smith <dsmith@danplanet.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

from builtins import bytes

import struct
import time
import logging

from chirp import chirp_common, errors, util, directory, memmap
from chirp import bitwise
from chirp.settings import RadioSetting, RadioSettingGroup, \
RadioSettingValueInteger, RadioSettingValueList, \
RadioSettingValueBoolean, RadioSettingValueString, \
RadioSettingValueFloat, InvalidValueError, RadioSettings

LOG = logging.getLogger(__name__)

MEM_FORMAT = """
#seekto 0x0008;
struct {
lbcd rxfreq[4];
lbcd txfreq[4];
ul16 rxtone;
ul16 txtone;
u8 unused1:3,
isuhf:1,
scode:4;
u8 unknown1:7,
txtoneicon:1;
u8 mailicon:3,
unknown2:3,
lowpower:2;
u8 unknown3:1,
wide:1,
unknown4:2,
bcl:1,
scan:1,
pttid:2;
} memory[128];

#seekto 0x0B08;
struct {
u8 code[5];
u8 unused[11];
} pttid[15];

#seekto 0x0C88;
struct {
u8 code222[3];
u8 unused222[2];
u8 code333[3];
u8 unused333[2];
u8 alarmcode[3];
u8 unused119[2];
u8 unknown1;
u8 code555[3];
u8 unused555[2];
u8 code666[3];
u8 unused666[2];
u8 code777[3];
u8 unused777[2];
u8 unknown2;
u8 code60606[5];
u8 code70707[5];
u8 code[5];
u8 unused1:6,
aniid:2;
u8 unknown[2];
u8 dtmfon;
u8 dtmfoff;
} ani;

#seekto 0x0E28;
struct {
u8 squelch;
u8 step;
u8 unknown1;
u8 save;
u8 vox;
u8 unknown2;
u8 abr;
u8 tdr;
u8 beep;
u8 timeout;
u8 unknown3[4];
u8 voice;
u8 unknown4;
u8 dtmfst;
u8 unknown5;
u8 unknown12:6,
screv:2;
u8 pttid;
u8 pttlt;
u8 mdfa;
u8 mdfb;
u8 bcl;
u8 autolk; // NOTE: The UV-6 calls this byte voxenable, but the UV-5R
// calls it autolk. Since this is a minor difference, it will
// be referred to by the wrong name for the UV-6.
u8 sftd;
u8 unknown6[3];
u8 wtled;
u8 rxled;
u8 txled;
u8 almod;
u8 band;
u8 tdrab;
u8 ste;
u8 rpste;
u8 rptrl;
u8 ponmsg;
u8 roger;
u8 rogerrx;
u8 tdrch; // NOTE: The UV-82HP calls this byte rtone, but the UV-6
// calls it tdrch. Since this is a minor difference, it will
// be referred to by the wrong name for the UV-82HP.
u8 displayab:1,
unknown1:2,
fmradio:1,
alarm:1,
unknown2:1,
reset:1,
menu:1;
u8 unknown1:6,
singleptt:1,
vfomrlock:1;
u8 workmode;
u8 keylock;
} settings;

#seekto 0x0E7E;
struct {
u8 unused1:1,
mrcha:7;
u8 unused2:1,
mrchb:7;
} wmchannel;

#seekto 0x0F10;
struct {
u8 freq[8];
u8 offset[6];
ul16 rxtone;
ul16 txtone;
u8 unused1:7,
band:1;
u8 unknown3;
u8 unused2:2,
sftd:2,
scode:4;
u8 unknown4;
u8 unused3:1
step:3,
unused4:4;
u8 txpower:1,
widenarr:1,
unknown5:4,
txpower3:2;
} vfoa;

#seekto 0x0F30;
struct {
u8 freq[8];
u8 offset[6];
ul16 rxtone;
ul16 txtone;
u8 unused1:7,
band:1;
u8 unknown3;
u8 unused2:2,
sftd:2,
scode:4;
u8 unknown4;
u8 unused3:1
step:3,
unused4:4;
u8 txpower:1,
widenarr:1,
unknown5:4,
txpower3:2;
} vfob;

#seekto 0x0F48; // some new radios do not support this feature
char bcstfmlo[14]; // broadcast FM 65-75 MHz band
u16 fm_presets; // broadcast FM frequency
char bcstfmhi[14]; // broadcast FM 75-108 MHz band

#seekto 0x1008;
struct {
char name[7];
u8 unknown2[9];
} names[128];

#seekto 0x1818;
struct {
char line1[7];
char line2[7];
} sixpoweron_msg;

#seekto 0x%04X;
struct {
char line1[7];
char line2[7];
} poweron_msg;

#seekto 0x1838;
struct {
char line1[7];
char line2[7];
} firmware_msg;

struct limit {
u8 enable;
bbcd lower[2];
bbcd upper[2];
};

#seekto 0x1908;
struct {
struct limit vhf;
struct limit uhf;
} limits_new;

#seekto 0x1910;
struct {
u8 unknown1[2];
struct limit vhf;
u8 unknown2;
u8 unknown3[8];
u8 unknown4[2];
struct limit uhf;
} limits_old;

struct squelch {
u8 sql0;
u8 sql1;
u8 sql2;
u8 sql3;
u8 sql4;
u8 sql5;
u8 sql6;
u8 sql7;
u8 sql8;
u8 sql9;
};

#seekto 0x18A8;
struct {
struct squelch vhf;
u8 unknown1[6];
u8 unknown2[16];
struct squelch uhf;
} squelch_new;

#seekto 0x18E8;
struct {
struct squelch vhf;
u8 unknown[6];
struct squelch uhf;
} squelch_old;

"""

# 0x1EC0 - 0x2000

vhf_220_radio = b"\x02"

BASETYPE_UV5R = [b"BFS", b"BFB", b"N5R-2", b"N5R2", b"N5RV", b"BTS", b"D5R2",
b"B5R2"]
BASETYPE_F11 = [b"USA"]
BASETYPE_UV82 = [b"US2S2", b"B82S", b"BF82", b"N82-2", b"N822"]
BASETYPE_BJ55 = [b"BJ55"] # needed for for the Baojie UV-55 in bjuv55.py
BASETYPE_UV6 = [b"BF1", b"UV6"]
BASETYPE_KT980HP = [b"BFP3V3 B"]
BASETYPE_F8HP = [b"BFP3V3 F", b"N5R-3", b"N5R3", b"F5R3", b"BFT", b"N5RV"]
BASETYPE_UV82HP = [b"N82-3", b"N823", b"N5R2"]
BASETYPE_UV82X3 = [b"HN5RV01"]
BASETYPE_LIST = BASETYPE_UV5R + BASETYPE_F11 + BASETYPE_UV82 + \
BASETYPE_BJ55 + BASETYPE_UV6 + BASETYPE_KT980HP + \
BASETYPE_F8HP + BASETYPE_UV82HP + BASETYPE_UV82X3

AB_LIST = ["A", "B"]
ALMOD_LIST = ["Site", "Tone", "Code"]
BANDWIDTH_LIST = ["Wide", "Narrow"]
COLOR_LIST = ["Off", "Blue", "Orange", "Purple"]
DTMFSPEED_LIST = ["%s ms" % x for x in range(50, 2010, 10)]
DTMFST_LIST = ["OFF", "DT-ST", "ANI-ST", "DT+ANI"]
MODE_LIST = ["Channel", "Name", "Frequency"]
PONMSG_LIST = ["Full", "Message"]
PTTID_LIST = ["Off", "BOT", "EOT", "Both"]
PTTIDCODE_LIST = ["%s" % x for x in range(1, 16)]
RTONE_LIST = ["1000 Hz", "1450 Hz", "1750 Hz", "2100 Hz"]
RESUME_LIST = ["TO", "CO", "SE"]
ROGERRX_LIST = ["Off"] + AB_LIST
RPSTE_LIST = ["OFF"] + ["%s" % x for x in range(1, 11)]
SAVE_LIST = ["Off", "1:1", "1:2", "1:3", "1:4"]
SCODE_LIST = ["%s" % x for x in range(1, 16)]
SHIFTD_LIST = ["Off", "+", "-"]
STEDELAY_LIST = ["OFF"] + ["%s ms" % x for x in range(100, 1100, 100)]
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0]
STEP_LIST = [str(x) for x in STEPS]
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 50.0]
STEP291_LIST = [str(x) for x in STEPS]
TDRAB_LIST = ["Off"] + AB_LIST
TDRCH_LIST = ["CH%s" % x for x in range(1, 129)]
TIMEOUT_LIST = ["%s sec" % x for x in range(15, 615, 15)] + \
["Off (if supported by radio)"]
TXPOWER_LIST = ["High", "Low"]
TXPOWER3_LIST = ["High", "Mid", "Low"]
VOICE_LIST = ["Off", "English", "Chinese"]
VOX_LIST = ["OFF"] + ["%s" % x for x in range(1, 11)]
WORKMODE_LIST = ["Frequency", "Channel"]

GMRS_FREQS1 = [462562500, 462587500, 462612500, 462637500, 462662500,
462687500, 462712500]
GMRS_FREQS2 = [467562500, 467587500, 467612500, 467637500, 467662500,
467687500, 467712500]
GMRS_FREQS3 = [462550000, 462575000, 462600000, 462625000, 462650000,
462675000, 462700000, 462725000]
GMRS_FREQS = GMRS_FREQS1 + GMRS_FREQS2 + GMRS_FREQS3 * 2


def _do_status(radio, direction, block):
status = chirp_common.Status()
status.msg = "Cloning %s radio" % direction
status.cur = block
status.max = radio.get_memsize()
radio.status_fn(status)


UV5R_MODEL_ORIG = b"\x50\xBB\xFF\x01\x25\x98\x4D"
UV5R_MODEL_291 = b"\x50\xBB\xFF\x20\x12\x07\x25"
UV5R_MODEL_F11 = b"\x50\xBB\xFF\x13\xA1\x11\xDD"
UV5R_MODEL_UV82 = b"\x50\xBB\xFF\x20\x13\x01\x05"
UV5R_MODEL_UV6 = b"\x50\xBB\xFF\x20\x12\x08\x23"
UV5R_MODEL_UV6_ORIG = b"\x50\xBB\xFF\x12\x03\x98\x4D"
UV5R_MODEL_A58 = b"\x50\xBB\xFF\x20\x14\x04\x13"
UV5R_MODEL_UV5G = b"\x50\xBB\xFF\x20\x12\x06\x25"


def _upper_band_from_data(data):
return data[0x03:0x04]


def _upper_band_from_image(radio):
return _upper_band_from_data(radio.get_mmap())


def _read_from_data(data, data_start, data_stop):
data = data[data_start:data_stop]
return data


def _get_data_from_image(radio, _data_start, _data_stop):
image_data = _read_from_data(
radio.get_mmap().get_byte_compatible(),
_data_start,
_data_stop)
return image_data


def _firmware_version_from_data(data, version_start, version_stop):
version_tag = data[version_start:version_stop]
return version_tag


def _firmware_version_from_image(radio):
version = _firmware_version_from_data(
radio.get_mmap().get_byte_compatible(),
radio._fw_ver_file_start,
radio._fw_ver_file_stop)
return version


def _do_ident(radio, magic, secondack=True):
serial = radio.pipe
serial.timeout = 1

LOG.info("Sending Magic: %s" % util.hexprint(magic))
for byte in magic:
serial.write(bytes([byte]))
time.sleep(0.01)
ack = serial.read(1)

if ack != b"\x06":
if ack:
LOG.debug(repr(ack))
raise errors.RadioError("Radio did not respond")

serial.write(b"\x02")

# Until recently, the "ident" returned by the radios supported by this
# driver have always been 8 bytes long. The image structure is the 8 byte
# "ident" followed by the downloaded memory data. So all of the settings
# structures are offset by 8 bytes. The ident returned from a UV-6 radio
# can be 8 bytes (original model) or now 12 bytes.
#
# To accommodate this, the "ident" is now read one byte at a time until the
# last byte ("\xdd") is encountered. The bytes containing the value "\x01"
# are discarded to shrink the "ident" length down to 8 bytes to keep the
# image data aligned with the existing settings structures.

# Ok, get the response
response = b""
for i in range(1, 13):
byte = serial.read(1)
response += byte
# stop reading once the last byte ("\xdd") is encountered
if byte == b"\xDD":
break

# check if response is OK
if len(response) in [8, 12]:
# DEBUG
LOG.info("Valid response, got this:")
LOG.debug(util.hexprint(response))
if len(response) == 12:
ident = (bytes([response[0], response[3], response[5]]) +
response[7:])
else:
ident = response
else:
# bad response
msg = "Unexpected response, got this:"
msg += util.hexprint(response)
LOG.debug(msg)
raise errors.RadioError("Unexpected response from radio.")

if secondack:
serial.write(b"\x06")
ack = serial.read(1)
if ack != b"\x06":
raise errors.RadioError("Radio refused clone")

return ident


def _read_block(radio, start, size, first_command=False):
msg = struct.pack(">BHB", ord("S"), start, size)
radio.pipe.write(msg)

if first_command is False:
ack = radio.pipe.read(1)
if ack != b"\x06":
raise errors.RadioError(
"Radio refused to send second block 0x%04x" % start)

answer = radio.pipe.read(4)
if len(answer) != 4:
raise errors.RadioError("Radio refused to send block 0x%04x" % start)

cmd, addr, length = struct.unpack(">BHB", answer)
if cmd != ord("X") or addr != start or length != size:
LOG.error("Invalid answer for block 0x%04x:" % start)
LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (cmd, addr, length))
raise errors.RadioError("Unknown response from radio")

chunk = radio.pipe.read(size)
if not chunk:
raise errors.RadioError("Radio did not send block 0x%04x" % start)
elif len(chunk) != size:
LOG.error("Chunk length was 0x%04i" % len(chunk))
raise errors.RadioError("Radio sent incomplete block 0x%04x" % start)

radio.pipe.write(b"\x06")
time.sleep(0.05)

return chunk


def _get_aux_data_from_radio(radio):
block0 = _read_block(radio, 0x1E80, 0x40, True)
block1 = _read_block(radio, 0x1EC0, 0x40, False)
block2 = _read_block(radio, 0x1F00, 0x40, False)
block3 = _read_block(radio, 0x1F40, 0x40, False)
block4 = _read_block(radio, 0x1F80, 0x40, False)
block5 = _read_block(radio, 0x1FC0, 0x40, False)
version = block1[48:62]
area1 = block2 + block3[0:32]
area2 = block3[48:64]
area3 = block4[16:64]
# check for dropped byte bug
dropped_byte = block5[15:16] == b"\xFF" # True/False
return version, area1, area2, area3, dropped_byte


def _get_radio_firmware_version(radio):
if radio.MODEL == "BJ-UV55":
block = _read_block(radio, 0x1FF0, 0x40, True)
version = block[0:6]
return version
else:
block0 = _read_block(radio, 0x1E80, 0x40, True)
block1 = _read_block(radio, 0x1EC0, 0x40, False)
block2 = _read_block(radio, 0x1FC0, 0x40, False)
version = block1[48:62]
# check for dropped byte bug
dropped_byte = block2[15:16] == b"\xFF" # True/False
return version, dropped_byte


IDENT_BLACKLIST = {
b"\x50\x0D\x0C\x20\x16\x03\x28": "Radio identifies as BTECH UV-5X3",
b"\x50\xBB\xFF\x20\x12\x06\x25": "Radio identifies as Radioddity UV-5G",
}


def _ident_radio(radio):
for magic in radio._idents:
error = None
try:
data = _do_ident(radio, magic)
return data
except errors.RadioError as e:
LOG.error("uv5r._ident_radio: %s", e)
error = e
time.sleep(2)

for magic, reason in list(IDENT_BLACKLIST.items()):
try:
_do_ident(radio, magic, secondack=False)
except errors.RadioError:
# No match, try the next one
continue

# If we got here, it means we identified the radio as
# something other than one of our valid idents. Warn
# the user so they can do the right thing.
LOG.warning(('Identified radio as a blacklisted model '
'(details: %s)') % reason)
raise errors.RadioError(('%s. Please choose the proper vendor/'
'model and try again.') % reason)

if error:
raise error
raise errors.RadioError("Radio did not respond")


def _do_download(radio):
data = _ident_radio(radio)

if radio.MODEL == "BJ-UV55":
radio_version = _get_radio_firmware_version(radio)
else:
radio_version, has_dropped_byte_bug = \
_get_radio_firmware_version(radio)
LOG.info("Radio Version is %s" % repr(radio_version))
LOG.info("Radio has dropped byte bug: %s" % repr(has_dropped_byte_bug))

# Main block
LOG.debug("downloading main block...")
for i in range(0, 0x1800, 0x40):
data += _read_block(radio, i, 0x40, False)
_do_status(radio, "from", i)
_do_status(radio, "from", radio.get_memsize())
LOG.debug("done.")
if radio._aux_block:
if has_dropped_byte_bug:
LOG.debug("downloading aux block...")
# Auxiliary block starts at 0x1ECO (?)
for i in range(0x1EC0, 0x1FC0, 0x40):
data += _read_block(radio, i, 0x40, False)
# Switch to 0x10 block size as a workaround for new radios that
# will drop byte 0x1FCF and pad the end with 0x80 if read as a
# 0x40 block size
for i in range(0x1FC0, 0x2000, 0x10):
data += _read_block(radio, i, 0x10, False)
else:
LOG.debug("downloading aux block...")
# Auxiliary block starts at 0x1ECO (?)
for i in range(0x1EC0, 0x2000, 0x40):
data += _read_block(radio, i, 0x40, False)

LOG.debug("done.")
return memmap.MemoryMapBytes(data)


def _send_block(radio, addr, data):
msg = struct.pack(">BHB", ord("X"), addr, len(data))
radio.pipe.write(msg + data)
time.sleep(0.05)

ack = radio.pipe.read(1)
if ack != b"\x06":
raise errors.RadioError("Radio refused to accept block 0x%04x" % addr)


def _do_upload(radio):
ident = _ident_radio(radio)
radio_upper_band = ident[3:4]
image_upper_band = _upper_band_from_image(radio)

if image_upper_band == vhf_220_radio or radio_upper_band == vhf_220_radio:
if image_upper_band != radio_upper_band:
raise errors.RadioError("Image not supported by radio")

image_version = _firmware_version_from_image(radio)
if radio.MODEL == "BJ-UV55":
radio_version = _get_radio_firmware_version(radio)

# default ranges
_ranges_main_default = radio._ranges_main
_ranges_aux_default = radio._ranges_aux
_skip_aux_block = False
else:
radio_version, aux_r1, aux_r2, aux_r3, \
has_dropped_byte_bug = \
_get_aux_data_from_radio(radio)

aux_i1 = _get_data_from_image(radio, 0x1848, 0x18A8)
aux_i2 = _get_data_from_image(radio, 0x18B8, 0x18C8)
aux_i3 = _get_data_from_image(radio, 0x18D8, 0x1908)

# check if Aux memory of image matches Aux memory of radio
if aux_i1 != aux_r1:
# Area 1 does not match
# The safest thing to do is to skip uploading Aux mem area.
_skip_aux_block = True
LOG.info("Aux memory mis-match")
LOG.info("Aux area 1 from image is %s" % repr(aux_i1))
LOG.info("Aux area 1 from radio is %s" % repr(aux_r1))
elif aux_i2 != aux_r2:
# Area 2 does not match
# The safest thing to do is to skip uploading Aux mem area.
_skip_aux_block = True
LOG.info("Aux memory mis-match")
LOG.info("Aux area 2 from image is %s" % repr(aux_i2))
LOG.info("Aux area 2 from radio is %s" % repr(aux_r2))
elif aux_i3 != aux_r3:
# Area 3 does not match
# The safest thing to do is to skip uploading Aux mem area.
_skip_aux_block = True
LOG.info("Aux memory mis-match")
LOG.info("Aux area 3 from image is %s" % repr(aux_i3))
LOG.info("Aux area 3 from radio is %s" % repr(aux_r3))
else:
# All areas matched
# Uploading Aux mem area is permitted
_skip_aux_block = False

# default ranges
_ranges_main_default = [
(0x0008, 0x0CF8), # skip 0x0CF8 - 0x0D08
(0x0D08, 0x0DF8), # skip 0x0DF8 - 0x0E08
(0x0E08, 0x1808),
]

# skip broadcast fm range
_ranges_main_no_fm = [
(0x0008, 0x0CF8), # skip 0x0CF8 - 0x0D08
(0x0D08, 0x0DF8), # skip 0x0DF8 - 0x0E08
(0x0E08, 0x0F48), # skip 0x0F48 - 0x0F68
(0x0F68, 0x1808)
]

_ranges_aux_default = [
(0x1EC0, 0x2000),
]

LOG.info("Image Version is %s" % repr(image_version))
LOG.info("Radio Version is %s" % repr(radio_version))

# set default ranges
ranges_main = _ranges_main_default
ranges_aux = _ranges_aux_default

# broadcast FM support check
if has_dropped_byte_bug:
# radios with the dropped byte bug don't appear to have
# Broadcast FM support
# The safest thing to do is to skip uploading 0x0F48-0x0F68
ranges_main = _ranges_main_no_fm
elif "\xFF" in str(radio._memobj.bcstfmlo) or \
"\xFF" in str(radio._memobj.bcstfmhi):
# 0x0F48-0x0F65 contains 0xFF characters
# This image appears to be from a radio that doesn't have
# Broadcast FM support
# The safest thing to do is to skip uploading 0x0F48-0x0F68
ranges_main = _ranges_main_no_fm
elif _skip_aux_block:
# image / radio Aux memory areas do not match
# The safest thing to do is to skip uploading 0x0F48-0x0F68
ranges_main = _ranges_main_no_fm

if radio._all_range_flag:
_skip_aux_block = False
ranges_main = radio._ranges_main
ranges_aux = radio._ranges_aux
LOG.warning('Sending all ranges to radio as instructed')

# Main block
mmap = radio.get_mmap().get_byte_compatible()
for start_addr, end_addr in ranges_main:
for i in range(start_addr, end_addr, 0x10):
_send_block(radio, i - 0x08, mmap[i:i + 0x10])
_do_status(radio, "to", i)
_do_status(radio, "to", radio.get_memsize())

if len(mmap.get_packed()) == 0x1808:
LOG.info("Old image, not writing aux block")
return # Old image, no aux block

if not radio._aux_block:
LOG.info("Skipped writing aux block")
return # Aux block skipped

if _skip_aux_block:
msg = ("This is NOT an error. The upload has finished successfully.\n"
"The Main memory area was fully transferred. The Aux memory "
"area (containing 'Other Settings' and 'Service Settings') was "
"skipped because it appears to be from a different radio.")
raise errors.RadioError(msg)

# Auxiliary block at radio address 0x1EC0, our offset 0x1808
for start_addr, end_addr in ranges_aux:
for i in range(start_addr, end_addr, 0x10):
addr = 0x1808 + (i - 0x1EC0)
_send_block(radio, i, mmap[addr:addr + 0x10])

if radio._all_range_flag:
radio._all_range_flag = False
LOG.warning('Sending all ranges to radio has completed')
raise errors.RadioError(
"This is NOT an error.\n"
"The upload has finished successfully.\n"
"Please restart CHIRP.")


UV5R_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=4.00),
chirp_common.PowerLevel("Low", watts=1.00)]

UV5R_POWER_LEVELS3 = [chirp_common.PowerLevel("High", watts=8.00),
chirp_common.PowerLevel("Med", watts=4.00),
chirp_common.PowerLevel("Low", watts=1.00)]

UV5R_DTCS = tuple(sorted(chirp_common.DTCS_CODES + (645,)))

UV5R_CHARSET = chirp_common.CHARSET_UPPER_NUMERIC + \
"!@#$%^&*()+-=[]:\";'<>?,./"


def model_match(cls, data):
"""Match the opened/downloaded image to the correct version"""

if len(data) == 0x1950:
rid = data[0x1948:0x1950]
return rid.startswith(cls.MODEL)
elif len(data) == 0x1948:
rid = data[cls._fw_ver_file_start:cls._fw_ver_file_stop]
if any(type in rid for type in cls._basetype):
return True
else:
return False


class BaofengUV5R(chirp_common.CloneModeRadio):

"""Baofeng UV-5R"""
VENDOR = "Baofeng"
MODEL = "UV-5R"
BAUD_RATE = 9600
NEEDS_COMPAT_SERIAL = False

_memsize = 0x1808
_basetype = BASETYPE_UV5R
_idents = [UV5R_MODEL_291,
UV5R_MODEL_ORIG
]
_vhf_range = (130000000, 176000000)
_220_range = (220000000, 260000000)
_uhf_range = (400000000, 520000000)
_aux_block = True
_tri_power = False
_bw_shift = False
_mem_params = (0x1828 # poweron_msg offset
)
# offset of fw version in image file
_fw_ver_file_start = 0x1838
_fw_ver_file_stop = 0x1846

_ranges_main = [
(0x0008, 0x1808),
]
_ranges_aux = [
(0x1EC0, 0x2000),
]
_valid_chars = UV5R_CHARSET

@classmethod
def get_prompts(cls):
rp = chirp_common.RadioPrompts()
rp.experimental = \
('Due to the fact that the manufacturer continues to '
'release new versions of the firmware with obscure and '
'hard-to-track changes, this driver may not work with '
'your device. Thus far and to the best knowledge of the '
'author, no UV-5R radios have been harmed by using CHIRP. '
'However, proceed at your own risk!')
rp.pre_download = _(
"1. Turn radio off.\n"
"2. Connect cable to mic/spkr connector.\n"
"3. Make sure connector is firmly connected.\n"
"4. Turn radio on (volume may need to be set at 100%).\n"
"5. Ensure that the radio is tuned to channel with no"
" activity.\n"
"6. Click OK to download image from device.\n")
rp.pre_upload = _(
"1. Turn radio off.\n"
"2. Connect cable to mic/spkr connector.\n"
"3. Make sure connector is firmly connected.\n"
"4. Turn radio on (volume may need to be set at 100%).\n"
"5. Ensure that the radio is tuned to channel with no"
" activity.\n"
"6. Click OK to upload image to device.\n")
return rp

def get_features(self):
rf = chirp_common.RadioFeatures()
rf.has_settings = True
rf.has_bank = False
rf.has_cross = True
rf.has_rx_dtcs = True
rf.has_tuning_step = False
rf.can_odd_split = True
rf.valid_name_length = 7
rf.valid_characters = self._valid_chars
rf.valid_skips = ["", "S"]
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
rf.valid_power_levels = UV5R_POWER_LEVELS
rf.valid_duplexes = ["", "-", "+", "split", "off"]
rf.valid_modes = ["FM", "NFM"]
rf.valid_tuning_steps = STEPS
rf.valid_dtcs_codes = UV5R_DTCS

normal_bands = [self._vhf_range, self._uhf_range]
rax_bands = [self._vhf_range, self._220_range]

if self._mmap is None:
rf.valid_bands = [normal_bands[0], rax_bands[1], normal_bands[1]]
elif not self._is_orig() and self._my_upper_band() == vhf_220_radio:
rf.valid_bands = rax_bands
else:
rf.valid_bands = normal_bands
rf.memory_bounds = (0, 127)
return rf

@classmethod
def match_model(cls, filedata, filename):
match_size = False
match_model = False
if len(filedata) in [0x1808, 0x1948, 0x1950]:
match_size = True
match_model = model_match(cls, filedata)

if match_size and match_model:
return True
else:
return False

def process_mmap(self):
self._memobj = bitwise.parse(MEM_FORMAT % self._mem_params, self._mmap)
self._all_range_flag = False

def sync_in(self):
try:
self._mmap = _do_download(self)
except errors.RadioError:
raise
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)
self.process_mmap()

def sync_out(self):
try:
_do_upload(self)
except errors.RadioError:
raise
except Exception as e:
raise errors.RadioError("Failed to communicate with radio: %s" % e)

def get_raw_memory(self, number):
return repr(self._memobj.memory[number])

def _is_txinh(self, _mem):
raw_tx = ""
for i in range(0, 4):
raw_tx += _mem.txfreq[i].get_raw()
return raw_tx == "\xFF\xFF\xFF\xFF"

def _get_mem(self, number):
return self._memobj.memory[number]

def _get_nam(self, number):
return self._memobj.names[number]

def get_memory(self, number):
_mem = self._get_mem(number)
_nam = self._get_nam(number)

mem = chirp_common.Memory()
mem.number = number

if _mem.get_raw()[0] == "\xff":
mem.empty = True
return mem

mem.freq = int(_mem.rxfreq) * 10

if self._is_txinh(_mem):
mem.duplex = "off"
mem.offset = 0
elif int(_mem.rxfreq) == int(_mem.txfreq):
mem.duplex = ""
mem.offset = 0
elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000:
mem.duplex = "split"
mem.offset = int(_mem.txfreq) * 10
else:
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10

for char in _nam.name:
if str(char) == "\xFF":
char = " " # The UV-5R software may have 0xFF mid-name
mem.name += str(char)
mem.name = mem.name.rstrip()

dtcs_pol = ["N", "N"]

if _mem.txtone in [0, 0xFFFF]:
txmode = ""
elif _mem.txtone >= 0x0258:
txmode = "Tone"
mem.rtone = int(_mem.txtone) / 10.0
elif _mem.txtone <= 0x0258:
txmode = "DTCS"
if _mem.txtone > 0x69:
index = _mem.txtone - 0x6A
dtcs_pol[0] = "R"
else:
index = _mem.txtone - 1
mem.dtcs = UV5R_DTCS[index]
else:
LOG.warn("Bug: txtone is %04x" % _mem.txtone)

if _mem.rxtone in [0, 0xFFFF]:
rxmode = ""
elif _mem.rxtone >= 0x0258:
rxmode = "Tone"
mem.ctone = int(_mem.rxtone) / 10.0
elif _mem.rxtone <= 0x0258:
rxmode = "DTCS"
if _mem.rxtone >= 0x6A:
index = _mem.rxtone - 0x6A
dtcs_pol[1] = "R"
else:
index = _mem.rxtone - 1
mem.rx_dtcs = UV5R_DTCS[index]
else:
LOG.warn("Bug: rxtone is %04x" % _mem.rxtone)

if txmode == "Tone" and not rxmode:
mem.tmode = "Tone"
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
mem.tmode = "TSQL"
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
mem.tmode = "DTCS"
elif rxmode or txmode:
mem.tmode = "Cross"
mem.cross_mode = "%s->%s" % (txmode, rxmode)

mem.dtcs_polarity = "".join(dtcs_pol)

if not _mem.scan:
mem.skip = "S"

if self._tri_power:
levels = UV5R_POWER_LEVELS3
else:
levels = UV5R_POWER_LEVELS
try:
mem.power = levels[_mem.lowpower]
except IndexError:
LOG.error("Radio reported invalid power level %s (in %s)" %
(_mem.lowpower, levels))
mem.power = levels[0]

mem.mode = _mem.wide and "FM" or "NFM"

mem.extra = RadioSettingGroup("Extra", "extra")

rs = RadioSetting("bcl", "BCL",
RadioSettingValueBoolean(_mem.bcl))
mem.extra.append(rs)

rs = RadioSetting("pttid", "PTT ID",
RadioSettingValueList(PTTID_LIST,
PTTID_LIST[_mem.pttid]))
mem.extra.append(rs)

rs = RadioSetting("scode", "PTT ID Code",
RadioSettingValueList(PTTIDCODE_LIST,
PTTIDCODE_LIST[_mem.scode]))
mem.extra.append(rs)

immutable = []

if self.MODEL == "GT-5R":
if not ((mem.freq >= self.vhftx[0] and mem.freq < self.vhftx[1]) or
(mem.freq >= self.uhftx[0] and mem.freq < self.uhftx[1])):
mem.duplex = 'off'
mem.offset = 0
immutable = ["duplex", "offset"]

mem.immutable = immutable

return mem

def _set_mem(self, number):
return self._memobj.memory[number]

def _set_nam(self, number):
return self._memobj.names[number]

def set_memory(self, mem):
_mem = self._get_mem(mem.number)
_nam = self._get_nam(mem.number)

if mem.empty:
_mem.set_raw("\xff" * 16)
_nam.set_raw("\xff" * 16)
return

was_empty = False
# same method as used in get_memory to find
# out whether a raw memory is empty
if _mem.get_raw()[0] == "\xff":
was_empty = True
LOG.debug("UV5R: this mem was empty")
else:
# memorize old extra-values before erasing the whole memory
# used to solve issue 4121
LOG.debug("mem was not empty, memorize extra-settings")
prev_bcl = _mem.bcl.get_value()
prev_scode = _mem.scode.get_value()
prev_pttid = _mem.pttid.get_value()

_mem.set_raw("\x00" * 16)

_mem.rxfreq = mem.freq / 10

if mem.duplex == "off":
for i in range(0, 4):
_mem.txfreq[i].set_raw("\xFF")
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10

_namelength = self.get_features().valid_name_length
for i in range(_namelength):
try:
_nam.name[i] = mem.name[i]
except IndexError:
_nam.name[i] = "\xFF"

rxmode = txmode = ""
if mem.tmode == "Tone":
_mem.txtone = int(mem.rtone * 10)
_mem.rxtone = 0
elif mem.tmode == "TSQL":
_mem.txtone = int(mem.ctone * 10)
_mem.rxtone = int(mem.ctone * 10)
elif mem.tmode == "DTCS":
rxmode = txmode = "DTCS"
_mem.txtone = UV5R_DTCS.index(mem.dtcs) + 1
_mem.rxtone = UV5R_DTCS.index(mem.dtcs) + 1
elif mem.tmode == "Cross":
txmode, rxmode = mem.cross_mode.split("->", 1)
if txmode == "Tone":
_mem.txtone = int(mem.rtone * 10)
elif txmode == "DTCS":
_mem.txtone = UV5R_DTCS.index(mem.dtcs) + 1
else:
_mem.txtone = 0
if rxmode == "Tone":
_mem.rxtone = int(mem.ctone * 10)
elif rxmode == "DTCS":
_mem.rxtone = UV5R_DTCS.index(mem.rx_dtcs) + 1
else:
_mem.rxtone = 0
else:
_mem.rxtone = 0
_mem.txtone = 0

if txmode == "DTCS" and mem.dtcs_polarity[0] == "R":
_mem.txtone += 0x69
if rxmode == "DTCS" and mem.dtcs_polarity[1] == "R":
_mem.rxtone += 0x69

_mem.scan = mem.skip != "S"
_mem.wide = mem.mode == "FM"

if mem.power:
if self._tri_power:
levels = [str(l) for l in UV5R_POWER_LEVELS3]
_mem.lowpower = levels.index(str(mem.power))
else:
_mem.lowpower = UV5R_POWER_LEVELS.index(mem.power)
else:
_mem.lowpower = 0

if not was_empty:
# restoring old extra-settings (issue 4121
_mem.bcl.set_value(prev_bcl)
_mem.scode.set_value(prev_scode)
_mem.pttid.set_value(prev_pttid)

for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)

def _is_orig(self):
version_tag = _firmware_version_from_image(self)
try:
if b'BFB' in version_tag:
idx = version_tag.index(b"BFB") + 3
version = int(version_tag[idx:idx + 3])
return version < 291
return False
except:
pass
raise errors.RadioError("Unable to parse version string %s" %
version_tag)

def _my_version(self):
version_tag = _firmware_version_from_image(self)
if b'BFB' in version_tag:
idx = version_tag.index(b"BFB") + 3
return int(version_tag[idx:idx + 3])

raise Exception("Unrecognized firmware version string")

def _my_upper_band(self):
band_tag = _upper_band_from_image(self)
return band_tag

def _get_settings(self):
_mem = self._memobj
_ani = self._memobj.ani
_settings = self._memobj.settings
_squelch = self._memobj.squelch_new
_vfoa = self._memobj.vfoa
_vfob = self._memobj.vfob
_wmchannel = self._memobj.wmchannel

basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")

group = RadioSettings(basic, advanced)

rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)

rs = RadioSetting("save", "Battery Saver",
RadioSettingValueList(
SAVE_LIST, SAVE_LIST[_settings.save]))
basic.append(rs)

rs = RadioSetting("vox", "VOX Sensitivity",
RadioSettingValueList(
VOX_LIST, VOX_LIST[_settings.vox]))
advanced.append(rs)

if self.MODEL == "UV-6":
# NOTE: The UV-6 calls this byte voxenable, but the UV-5R calls it
# autolk. Since this is a minor difference, it will be referred to
# by the wrong name for the UV-6.
rs = RadioSetting("autolk", "Vox",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)

if self.MODEL != "UV-6":
rs = RadioSetting("abr", "Backlight Timeout",
RadioSettingValueInteger(0, 24, _settings.abr))
basic.append(rs)

rs = RadioSetting("tdr", "Dual Watch",
RadioSettingValueBoolean(_settings.tdr))
advanced.append(rs)

if self.MODEL == "UV-6":
rs = RadioSetting("tdrch", "Dual Watch Channel",
RadioSettingValueList(
TDRCH_LIST, TDRCH_LIST[_settings.tdrch]))
advanced.append(rs)

rs = RadioSetting("tdrab", "Dual Watch TX Priority",
RadioSettingValueBoolean(_settings.tdrab))
advanced.append(rs)
else:
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
RadioSettingValueList(
TDRAB_LIST, TDRAB_LIST[_settings.tdrab]))
advanced.append(rs)

if self.MODEL == "UV-6":
rs = RadioSetting("alarm", "Alarm Sound",
RadioSettingValueBoolean(_settings.alarm))
advanced.append(rs)

if _settings.almod > 0x02:
val = 0x01
else:
val = _settings.almod
rs = RadioSetting("almod", "Alarm Mode",
RadioSettingValueList(
ALMOD_LIST, ALMOD_LIST[val]))
advanced.append(rs)

rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)

rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(
TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout]))
basic.append(rs)

if ((self._is_orig() and self._my_version() < 251) or
(self.MODEL in ["TI-F8+", "TS-T9+"])):
rs = RadioSetting("voice", "Voice",
RadioSettingValueBoolean(_settings.voice))
advanced.append(rs)
else:
rs = RadioSetting("voice", "Voice",
RadioSettingValueList(
VOICE_LIST, VOICE_LIST[_settings.voice]))
advanced.append(rs)

rs = RadioSetting("screv", "Scan Resume",
RadioSettingValueList(
RESUME_LIST, RESUME_LIST[_settings.screv]))
advanced.append(rs)

if self.MODEL != "UV-6":
rs = RadioSetting("mdfa", "Display Mode (A)",
RadioSettingValueList(
MODE_LIST, MODE_LIST[_settings.mdfa]))
basic.append(rs)

rs = RadioSetting("mdfb", "Display Mode (B)",
RadioSettingValueList(
MODE_LIST, MODE_LIST[_settings.mdfb]))
basic.append(rs)

rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)

if self.MODEL != "UV-6":
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)

rs = RadioSetting("fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)

if self.MODEL != "UV-6":
rs = RadioSetting("wtled", "Standby LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.wtled]))
basic.append(rs)

rs = RadioSetting("rxled", "RX LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.rxled]))
basic.append(rs)

rs = RadioSetting("txled", "TX LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.txled]))
basic.append(rs)

if isinstance(self, BaofengUV82Radio):
rs = RadioSetting("roger", "Roger Beep (TX)",
RadioSettingValueBoolean(_settings.roger))
basic.append(rs)
rs = RadioSetting("rogerrx", "Roger Beep (RX)",
RadioSettingValueList(
ROGERRX_LIST,
ROGERRX_LIST[_settings.rogerrx]))
basic.append(rs)
else:
rs = RadioSetting("roger", "Roger Beep",
RadioSettingValueBoolean(_settings.roger))
basic.append(rs)

rs = RadioSetting("ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_settings.ste))
advanced.append(rs)

rs = RadioSetting("rpste", "Squelch Tail Eliminate (repeater)",
RadioSettingValueList(
RPSTE_LIST, RPSTE_LIST[_settings.rpste]))
advanced.append(rs)

rs = RadioSetting("rptrl", "STE Repeater Delay",
RadioSettingValueList(
STEDELAY_LIST, STEDELAY_LIST[_settings.rptrl]))
advanced.append(rs)

if self.MODEL != "UV-6":
rs = RadioSetting("reset", "RESET Menu",
RadioSettingValueBoolean(_settings.reset))
advanced.append(rs)

rs = RadioSetting("menu", "All Menus",
RadioSettingValueBoolean(_settings.menu))
advanced.append(rs)

if self.MODEL == "F-11":
# this is an F-11 only feature
rs = RadioSetting("vfomrlock", "VFO/MR Button",
RadioSettingValueBoolean(_settings.vfomrlock))
advanced.append(rs)

if isinstance(self, BaofengUV82Radio):
# this is a UV-82C only feature
rs = RadioSetting("vfomrlock", "VFO/MR Switching (UV-82C only)",
RadioSettingValueBoolean(_settings.vfomrlock))
advanced.append(rs)

if self.MODEL == "UV-82HP":
# this is a UV-82HP only feature
rs = RadioSetting(
"vfomrlock", "VFO/MR Switching (BTech UV-82HP only)",
RadioSettingValueBoolean(_settings.vfomrlock))
advanced.append(rs)

if isinstance(self, BaofengUV82Radio):
# this is an UV-82C only feature
rs = RadioSetting("singleptt", "Single PTT (UV-82C only)",
RadioSettingValueBoolean(_settings.singleptt))
advanced.append(rs)

if self.MODEL == "UV-82HP":
# this is an UV-82HP only feature
rs = RadioSetting("singleptt", "Single PTT (BTech UV-82HP only)",
RadioSettingValueBoolean(_settings.singleptt))
advanced.append(rs)

if self.MODEL == "UV-82HP":
# this is an UV-82HP only feature
rs = RadioSetting(
"tdrch", "Tone Burst Frequency (BTech UV-82HP only)",
RadioSettingValueList(RTONE_LIST, RTONE_LIST[_settings.tdrch]))
advanced.append(rs)

def set_range_flag(setting):
val = [85, 115, 101, 65, 116, 79, 119, 110, 82, 105, 115, 107]
if [ord(x) for x in str(setting.value).strip()] == val:
self._all_range_flag = True
else:
self._all_range_flag = False
LOG.debug('Set range flag to %s' % self._all_range_flag)

rs = RadioSetting("allrange", "Range Override Parameter",
RadioSettingValueString(0, 12, "Default"))
rs.set_apply_callback(set_range_flag)
advanced.append(rs)

if len(self._mmap.get_packed()) == 0x1808:
# Old image, without aux block
return group

if self.MODEL != "UV-6":
other = RadioSettingGroup("other", "Other Settings")
group.append(other)

def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered

_msg = self._memobj.firmware_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)

val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)

_msg = self._memobj.sixpoweron_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1",
"6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2",
"6+Power-On Message 2", val)
other.append(rs)

#aux_mem_warn = ('TBD - Some message provided here')

aux_mem_warn = ("This setting will only be uploaded to your radio "
"if CHIRP can verify that your radio's Aux "
"memory area sufficiently matches the Aux memory "
"area of the 'image' that is being uploaded.")

_msg = self._memobj.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(
0, 7, _filter(_msg.line1)))
rs.set_warning(aux_mem_warn)
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(
0, 7, _filter(_msg.line2)))
rs.set_warning(aux_mem_warn)
other.append(rs)

rs = RadioSetting("ponmsg", "Power-On Message",
RadioSettingValueList(
PONMSG_LIST,
PONMSG_LIST[_settings.ponmsg]))
other.append(rs)

if self._is_orig():
limit = "limits_old"
else:
limit = "limits_new"

vhf_limit = getattr(self._memobj, limit).vhf
rs = RadioSetting("%s.vhf.lower" % limit,
"VHF Lower Limit (MHz)",
RadioSettingValueInteger(1, 1000,
vhf_limit.lower))
rs.set_warning(aux_mem_warn)
other.append(rs)

rs = RadioSetting("%s.vhf.upper" % limit,
"VHF Upper Limit (MHz)",
RadioSettingValueInteger(1, 1000,
vhf_limit.upper))
rs.set_warning(aux_mem_warn)
other.append(rs)

rs = RadioSetting("%s.vhf.enable" % limit, "VHF TX Enabled",
RadioSettingValueBoolean(vhf_limit.enable))
rs.set_warning(aux_mem_warn)
other.append(rs)

uhf_limit = getattr(self._memobj, limit).uhf
rs = RadioSetting("%s.uhf.lower" % limit,
"UHF Lower Limit (MHz)",
RadioSettingValueInteger(1, 1000,
uhf_limit.lower))
rs.set_warning(aux_mem_warn)
other.append(rs)
rs = RadioSetting("%s.uhf.upper" % limit,
"UHF Upper Limit (MHz)",
RadioSettingValueInteger(1, 1000,
uhf_limit.upper))
rs.set_warning(aux_mem_warn)
other.append(rs)
rs = RadioSetting("%s.uhf.enable" % limit, "UHF TX Enabled",
RadioSettingValueBoolean(uhf_limit.enable))
rs.set_warning(aux_mem_warn)
other.append(rs)

if self.MODEL != "UV-6":
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
group.append(workmode)

rs = RadioSetting("displayab", "Display",
RadioSettingValueList(
AB_LIST, AB_LIST[_settings.displayab]))
workmode.append(rs)

rs = RadioSetting("workmode", "VFO/MR Mode",
RadioSettingValueList(
WORKMODE_LIST,
WORKMODE_LIST[_settings.workmode]))
workmode.append(rs)

rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
workmode.append(rs)

rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127,
_wmchannel.mrcha))
workmode.append(rs)

rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127,
_wmchannel.mrchb))
workmode.append(rs)

def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)

def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
msg = ("Can't be between 174.00000-400.00000")
raise InvalidValueError(msg)
return chirp_common.format_freq(value)

def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10

val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _vfoa)
workmode.append(rs)

val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _vfob)
workmode.append(rs)

rs = RadioSetting("vfoa.sftd", "VFO A Shift",
RadioSettingValueList(
SHIFTD_LIST, SHIFTD_LIST[_vfoa.sftd]))
workmode.append(rs)

rs = RadioSetting("vfob.sftd", "VFO B Shift",
RadioSettingValueList(
SHIFTD_LIST, SHIFTD_LIST[_vfob.sftd]))
workmode.append(rs)

def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)

def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10

val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_vfoa.offset))
rs = RadioSetting("vfoa.offset",
"VFO A Offset (0.0-999.999)", val1a)
rs.set_apply_callback(apply_offset, _vfoa)
workmode.append(rs)

val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_vfob.offset))
rs = RadioSetting("vfob.offset",
"VFO B Offset (0.0-999.999)", val1b)
rs.set_apply_callback(apply_offset, _vfob)
workmode.append(rs)

if self._tri_power:
if _vfoa.txpower3 > 0x02:
val = 0x00
else:
val = _vfoa.txpower3
rs = RadioSetting("vfoa.txpower3", "VFO A Power",
RadioSettingValueList(
TXPOWER3_LIST,
TXPOWER3_LIST[val]))
workmode.append(rs)

if _vfob.txpower3 > 0x02:
val = 0x00
else:
val = _vfob.txpower3
rs = RadioSetting("vfob.txpower3", "VFO B Power",
RadioSettingValueList(
TXPOWER3_LIST,
TXPOWER3_LIST[val]))
workmode.append(rs)
else:
rs = RadioSetting("vfoa.txpower", "VFO A Power",
RadioSettingValueList(
TXPOWER_LIST,
TXPOWER_LIST[_vfoa.txpower]))
workmode.append(rs)

rs = RadioSetting("vfob.txpower", "VFO B Power",
RadioSettingValueList(
TXPOWER_LIST,
TXPOWER_LIST[_vfob.txpower]))
workmode.append(rs)

rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(
BANDWIDTH_LIST,
BANDWIDTH_LIST[_vfoa.widenarr]))
workmode.append(rs)

rs = RadioSetting("vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(
BANDWIDTH_LIST,
BANDWIDTH_LIST[_vfob.widenarr]))
workmode.append(rs)

rs = RadioSetting("vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(
PTTIDCODE_LIST, PTTIDCODE_LIST[_vfoa.scode]))
workmode.append(rs)

rs = RadioSetting("vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(
PTTIDCODE_LIST, PTTIDCODE_LIST[_vfob.scode]))
workmode.append(rs)

if not self._is_orig():
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(
STEP291_LIST, STEP291_LIST[_vfoa.step]))
workmode.append(rs)
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
RadioSettingValueList(
STEP291_LIST, STEP291_LIST[_vfob.step]))
workmode.append(rs)
else:
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(
STEP_LIST, STEP_LIST[_vfoa.step]))
workmode.append(rs)
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
RadioSettingValueList(
STEP_LIST, STEP_LIST[_vfob.step]))
workmode.append(rs)

dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group.append(dtmf)

if str(self._memobj.firmware_msg.line1) == "HN5RV01":
dtmfchars = "0123456789ABCD*#"
else:
dtmfchars = "0123456789 *#ABCD"

for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i,
"PTT ID Code %i" % (i + 1), val)

def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)

dtmfcharsani = "0123456789"

_codeobj = self._memobj.ani.code
_code = "".join([dtmfcharsani[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfcharsani)
rs = RadioSetting("ani.code", "ANI Code", val)

def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, _ani)
dtmf.append(rs)

rs = RadioSetting("ani.aniid", "ANI ID",
RadioSettingValueList(PTTID_LIST,
PTTID_LIST[_ani.aniid]))
dtmf.append(rs)

_codeobj = self._memobj.ani.alarmcode
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 3, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.alarmcode", "Alarm Code", val)

def apply_code(setting, obj):
alarmcode = []
for j in range(0, 3):
try:
alarmcode.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
alarmcode.append(0xFF)
obj.alarmcode = alarmcode
rs.set_apply_callback(apply_code, _ani)
dtmf.append(rs)

rs = RadioSetting("dtmfst", "DTMF Sidetone",
RadioSettingValueList(DTMFST_LIST,
DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)

if _ani.dtmfon > 0xC3:
val = 0x00
else:
val = _ani.dtmfon
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(DTMFSPEED_LIST,
DTMFSPEED_LIST[val]))
dtmf.append(rs)

if _ani.dtmfoff > 0xC3:
val = 0x00
else:
val = _ani.dtmfoff
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(DTMFSPEED_LIST,
DTMFSPEED_LIST[val]))
dtmf.append(rs)

rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, _settings.pttlt))
dtmf.append(rs)

if not self._is_orig() and self._aux_block:
service = RadioSettingGroup("service", "Service Settings")
group.append(service)

for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "squelch_new.%s.sql%i" % (band, index)
if band == "vhf":
_obj = self._memobj.squelch_new.vhf
elif band == "uhf":
_obj = self._memobj.squelch_new.uhf
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(key, name,
RadioSettingValueInteger(
0, 123,
getattr(_obj, "sql%i" % (index))))
rs.set_warning(aux_mem_warn)
service.append(rs)

return group

def get_settings(self):
try:
return self._get_settings()
except:
import traceback
LOG.error("Failed to parse settings: %s", traceback.format_exc())
return None

def set_settings(self, settings):
_settings = self._memobj.settings
for element in settings:
if not isinstance(element, RadioSetting):
self.set_settings(element)
continue
else:
try:
name = element.get_name()
if "." in name:
bits = name.split(".")
obj = self._memobj
for bit in bits[:-1]:
if "/" in bit:
bit, index = bit.split("/", 1)
index = int(index)
obj = getattr(obj, bit)[index]
else:
obj = getattr(obj, bit)
setting = bits[-1]
else:
obj = _settings
setting = element.get_name()

if element.has_apply_callback():
LOG.debug("Using apply callback")
element.run_apply_callback()
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception:
LOG.debug(element.get_name())
raise


class UV5XAlias(chirp_common.Alias):
VENDOR = "Baofeng"
MODEL = "UV-5X"


class RT5RAlias(chirp_common.Alias):
VENDOR = "Retevis"
MODEL = "RT5R"


class RT5RVAlias(chirp_common.Alias):
VENDOR = "Retevis"
MODEL = "RT5RV"


class RT5Alias(chirp_common.Alias):
VENDOR = "Retevis"
MODEL = "RT5"


class RT5_TPAlias(chirp_common.Alias):
VENDOR = "Retevis"
MODEL = "RT5(tri-power)"


class RH5RAlias(chirp_common.Alias):
VENDOR = "Rugged"
MODEL = "RH5R"


class ROUV5REXAlias(chirp_common.Alias):
VENDOR = "Radioddity"
MODEL = "UV-5R EX"


class A5RAlias(chirp_common.Alias):
VENDOR = "Ansoko"
MODEL = "A-5R"


@directory.register
class BaofengUV5RGeneric(BaofengUV5R):
ALIASES = [UV5XAlias, RT5RAlias, RT5RVAlias, RT5Alias, RH5RAlias,
ROUV5REXAlias, A5RAlias]


@directory.register
class BaofengF11Radio(BaofengUV5R):
VENDOR = "Baofeng"
MODEL = "F-11"
_basetype = BASETYPE_F11
_idents = [UV5R_MODEL_F11]

def _is_orig(self):
# Override this for F11 to always return False
return False


@directory.register
class BaofengUV82Radio(BaofengUV5R):
MODEL = "UV-82"
_basetype = BASETYPE_UV82
_idents = [UV5R_MODEL_UV82]
_vhf_range = (130000000, 176000000)
_uhf_range = (400000000, 521000000)
_valid_chars = chirp_common.CHARSET_ASCII

def _is_orig(self):
# Override this for UV82 to always return False
return False


@directory.register
class Radioddity82X3Radio(BaofengUV82Radio):
VENDOR = "Radioddity"
MODEL = "UV-82X3"
_basetype = BASETYPE_UV82X3

def get_features(self):
rf = BaofengUV5R.get_features(self)
rf.valid_bands = [self._vhf_range,
(200000000, 260000000),
self._uhf_range]
return rf


@directory.register
class BaofengUV6Radio(BaofengUV5R):

"""Baofeng UV-6/UV-7"""
VENDOR = "Baofeng"
MODEL = "UV-6"
_basetype = BASETYPE_UV6
_idents = [UV5R_MODEL_UV6,
UV5R_MODEL_UV6_ORIG
]
_aux_block = False

def get_features(self):
rf = BaofengUV5R.get_features(self)
rf.memory_bounds = (1, 128)
return rf

def _get_mem(self, number):
return self._memobj.memory[number - 1]

def _get_nam(self, number):
return self._memobj.names[number - 1]

def _set_mem(self, number):
return self._memobj.memory[number - 1]

def _set_nam(self, number):
return self._memobj.names[number - 1]

def _is_orig(self):
# Override this for UV6 to always return False
return False


@directory.register
class IntekKT980Radio(BaofengUV5R):
VENDOR = "Intek"
MODEL = "KT-980HP"
_basetype = BASETYPE_KT980HP
_idents = [UV5R_MODEL_291]
_vhf_range = (130000000, 180000000)
_uhf_range = (400000000, 521000000)
_tri_power = True

def get_features(self):
rf = BaofengUV5R.get_features(self)
rf.valid_power_levels = UV5R_POWER_LEVELS3
return rf

def _is_orig(self):
# Override this for KT980HP to always return False
return False


class ROGA5SAlias(chirp_common.Alias):
VENDOR = "Radioddity"
MODEL = "GA-5S"


class UV5XPAlias(chirp_common.Alias):
VENDOR = "Baofeng"
MODEL = "UV-5XP"


class TSTIF8Alias(chirp_common.Alias):
VENDOR = "TechSide"
MODEL = "TI-F8+"


class TenwayUV5RPro(chirp_common.Alias):
VENDOR = 'Tenway'
MODEL = 'UV-5R Pro'


class TSTST9Alias(chirp_common.Alias):
VENDOR = "TechSide"
MODEL = "TS-T9+"


class TDUV5RRadio(chirp_common.Alias):
VENDOR = "TIDRADIO"
MODEL = "TD-UV5R TriPower"


@directory.register
class BaofengBFF8HPRadio(BaofengUV5R):
VENDOR = "Baofeng"
MODEL = "BF-F8HP"
ALIASES = [RT5_TPAlias, ROGA5SAlias, UV5XPAlias, TSTIF8Alias,
TenwayUV5RPro, TSTST9Alias, TDUV5RRadio]
_basetype = BASETYPE_F8HP
_idents = [UV5R_MODEL_291,
UV5R_MODEL_A58
]
_vhf_range = (130000000, 180000000)
_uhf_range = (400000000, 521000000)
_tri_power = True

def get_features(self):
rf = BaofengUV5R.get_features(self)
rf.valid_power_levels = UV5R_POWER_LEVELS3
return rf

def _is_orig(self):
# Override this for BFF8HP to always return False
return False


class TenwayUV82Pro(chirp_common.Alias):
VENDOR = 'Tenway'
MODEL = 'UV-82 Pro'


@directory.register
class BaofengUV82HPRadio(BaofengUV5R):
VENDOR = "Baofeng"
MODEL = "UV-82HP"
ALIASES = [TenwayUV82Pro]
_basetype = BASETYPE_UV82HP
_idents = [UV5R_MODEL_UV82]
_vhf_range = (136000000, 175000000)
_uhf_range = (400000000, 521000000)
_valid_chars = chirp_common.CHARSET_ALPHANUMERIC + \
"!@#$%^&*()+-=[]:\";'<>?,./"
_tri_power = True

def get_features(self):
rf = BaofengUV5R.get_features(self)
rf.valid_power_levels = UV5R_POWER_LEVELS3
return rf

def _is_orig(self):
# Override this for UV82HP to always return False
return False


@directory.register
class RadioddityUV5RX3Radio(BaofengUV5R):
VENDOR = "Radioddity"
MODEL = "UV-5RX3"

def get_features(self):
rf = BaofengUV5R.get_features(self)
rf.valid_bands = [self._vhf_range,
(200000000, 260000000),
self._uhf_range]
return rf

@classmethod
def match_model(cls, filename, filedata):
return False


@directory.register
class RadioddityGT5RRadio(BaofengUV5R):
VENDOR = 'Baofeng'
MODEL = 'GT-5R'

vhftx = [144000000, 148000000]
uhftx = [420000000, 450000000]

def validate_memory(self, mem):
msgs = super().validate_memory(mem)

_msg_duplex = 'Duplex must be "off" for this frequency'
_msg_offset = 'Only simplex or +5 MHz offset allowed on GMRS'

if not ((mem.freq >= self.vhftx[0] and mem.freq < self.vhftx[1]) or
(mem.freq >= self.uhftx[0] and mem.freq < self.uhftx[1])):
if mem.duplex != "off":
msgs.append(chirp_common.ValidationWarning(_msg_duplex))

return msgs

def check_set_memory_immutable_policy(self, existing, new):
existing.immutable = []
super().check_set_memory_immutable_policy(existing, new)

@classmethod
def match_model(cls, filename, filedata):
return False


@directory.register
class RadioddityUV5GRadio(BaofengUV5R):
VENDOR = 'Radioddity'
MODEL = 'UV-5G'

_basetype = BASETYPE_UV5R
_idents = [UV5R_MODEL_UV5G]

@classmethod
def match_model(cls, filename, filedata):
return False
(38-38/41)