1
|
# Copyright 2022 Mel Terechenok <melvin.terechenok@gmail.com>
|
2
|
# Updated Driver to support Wouxon KG-UV9PX
|
3
|
# based on prior driver for KG-UV9D Plus by
|
4
|
# Jim Lieb <lieb@sea-troll.net>
|
5
|
#
|
6
|
# Borrowed from other chirp drivers, especially the KG-UV8D Plus
|
7
|
# by Krystian Struzik <toner_82@tlen.pl>
|
8
|
#
|
9
|
# This program is free software: you can redistribute it and/or modify
|
10
|
# it under the terms of the GNU General Public License as published by
|
11
|
# the Free Software Foundation, either version 3 of the License, or
|
12
|
# (at your option) any later version.
|
13
|
#
|
14
|
# This program is distributed in the hope that it will be useful,
|
15
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
16
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
17
|
# GNU General Public License for more details.
|
18
|
#
|
19
|
# You should have received a copy of the GNU General Public License
|
20
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
21
|
|
22
|
"""Wouxun KG-UV9D Plus radio management module"""
|
23
|
|
24
|
import time
|
25
|
import os
|
26
|
import logging
|
27
|
import struct
|
28
|
import string
|
29
|
from chirp import util, chirp_common, bitwise, memmap, errors, directory
|
30
|
from chirp.settings import RadioSetting, RadioSettingValue, \
|
31
|
RadioSettingGroup, \
|
32
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
33
|
RadioSettingValueInteger, RadioSettingValueString, \
|
34
|
RadioSettings, InvalidValueError
|
35
|
|
36
|
LOG = logging.getLogger(__name__)
|
37
|
|
38
|
CMD_IDENT = 0x80
|
39
|
CMD_HANGUP = 0x81
|
40
|
CMD_RCONF = 0x82
|
41
|
CMD_WCONF = 0x83
|
42
|
CMD_RCHAN = 0x84
|
43
|
CMD_WCHAN = 0x85
|
44
|
|
45
|
cmd_name = {
|
46
|
CMD_IDENT: "ident",
|
47
|
CMD_HANGUP: "hangup",
|
48
|
CMD_RCONF: "read config",
|
49
|
CMD_WCONF: "write config",
|
50
|
CMD_RCHAN: "read channel memory", # Unused
|
51
|
CMD_WCHAN: "write channel memory" # Unused because it is a hack.
|
52
|
}
|
53
|
|
54
|
# This is used to write the configuration of the radio base on info
|
55
|
# gleaned from the downloaded app. There are empty spaces and we honor
|
56
|
# them because we don't know what they are (yet) although we read the
|
57
|
# whole of memory.
|
58
|
#
|
59
|
# Channel memory is separate. There are 1000 (1-999) channels.
|
60
|
# These are read/written to the radio in 4 channel (96 byte)
|
61
|
# records starting at address 0xa00 and ending at
|
62
|
# 0x4800 (presuming the end of channel 1000 is 0x4860-1
|
63
|
|
64
|
config_map = ( # map address, write size, write count
|
65
|
(0x40, 16, 1), # Passwords
|
66
|
(0x60, 20, 1), # RX frequency limits
|
67
|
(0x74, 8, 1), # TX frequency limits
|
68
|
(0x740, 40, 1), # FM chan 1-20
|
69
|
(0x780, 16, 1), # vfo-b-150
|
70
|
(0x790, 16, 1), # vfo-b-450
|
71
|
(0x800, 16, 1), # vfo-a-150
|
72
|
(0x810, 16, 1), # vfo-a-450
|
73
|
(0x820, 16, 1), # vfo-a-300
|
74
|
(0x830, 16, 1), # vfo-a-700
|
75
|
(0x840, 16, 1), # vfo-a-200
|
76
|
(0x860, 16, 1), # area-a-conf
|
77
|
(0x870, 16, 1), # area-b-conf
|
78
|
(0x880, 16, 1), # radio conf 0
|
79
|
(0x890, 16, 1), # radio conf 1
|
80
|
(0x8a0, 16, 1), # radio conf 2
|
81
|
(0x8b0, 16, 1), # radio conf 3
|
82
|
(0x8c0, 16, 1), # PTT-ANI
|
83
|
(0x8d0, 16, 1), # SCC
|
84
|
(0x8e0, 16, 1), # power save
|
85
|
(0x8f0, 16, 1), # Display banner
|
86
|
(0x940, 64, 2), # Scan groups and names
|
87
|
(0xa00, 64, 249), # Memory Channels 1-996
|
88
|
(0x4840, 48, 1), # Memory Channels 997-999
|
89
|
(0x4900, 32, 249), # Memory Names 1-996
|
90
|
(0x6820, 24, 1), # Memory Names 997-999
|
91
|
(0x7400, 64, 5), # CALL-ID 1-20, names 1-20
|
92
|
)
|
93
|
|
94
|
config_map2 = ( # map address, write size, write count
|
95
|
(0x40, 16, 1), # Passwords
|
96
|
(0x50, 10, 1), # OEM Display Name
|
97
|
(0x60, 20, 1), # Rx Freq Limits Area A
|
98
|
(0x74, 8, 1), # TX Frequency Limits 150M and 450M
|
99
|
(0x7c, 4, 1), # Rx 150M Freq Limits Area B
|
100
|
# (0x80, 8, 1), # unknown Freq limits
|
101
|
(0x740, 40, 1), # FM chan 1-20
|
102
|
(0x780, 16, 1), # vfo-b-150
|
103
|
(0x790, 16, 1), # vfo-b-450
|
104
|
(0x800, 16, 1), # vfo-a-150
|
105
|
(0x810, 16, 1), # vfo-a-450
|
106
|
(0x820, 16, 1), # vfo-a-300
|
107
|
(0x830, 16, 1), # vfo-a-700
|
108
|
(0x840, 16, 1), # vfo-a-200
|
109
|
(0x860, 16, 1), # area-a-conf
|
110
|
(0x870, 16, 1), # area-b-conf
|
111
|
(0x880, 16, 1), # radio conf 0
|
112
|
(0x890, 16, 1), # radio conf 1
|
113
|
(0x8a0, 16, 1), # radio conf 2
|
114
|
(0x8b0, 16, 1), # radio conf 3
|
115
|
(0x8c0, 16, 1), # PTT-ANI
|
116
|
(0x8d0, 16, 1), # SCC
|
117
|
(0x8e0, 16, 1), # power save
|
118
|
(0x8f0, 16, 1), # Display banner
|
119
|
(0x940, 64, 2), # Scan groups and names
|
120
|
(0xa00, 64, 249), # Memory Channels 1-996
|
121
|
(0x4840, 48, 1), # Memory Channels 997-999
|
122
|
(0x4900, 32, 249), # Memory Names 1-996
|
123
|
(0x6820, 24, 1), # Memory Names 997-999
|
124
|
(0x7400, 64, 5), # CALL-ID 1-20, names 1-20
|
125
|
(0x7600, 1, 1) # Screen Mode
|
126
|
)
|
127
|
|
128
|
MEM_VALID = 0xfc
|
129
|
MEM_INVALID = 0xff
|
130
|
|
131
|
# In Issue #6995 we can find _valid values of 0 and 2 in the IMG
|
132
|
# so these values should be treated like MEM_VALID.
|
133
|
# state value of 0x40 found in deleted memory - still shows in CPS
|
134
|
VALID_MEM_VALUES = [MEM_VALID, 0x00, 0x02, 0x40, 0x3D]
|
135
|
INVALID_MEM_VALUES = [MEM_INVALID]
|
136
|
# Radio memory map. This matches the reads/writes above.
|
137
|
# structure elements whose name starts with x are currently unidentified
|
138
|
|
139
|
_MEM_FORMAT02 = """
|
140
|
#seekto 0x40;
|
141
|
|
142
|
struct {
|
143
|
char reset[6];
|
144
|
char x46[2];
|
145
|
char mode_sw[6];
|
146
|
char x4e;
|
147
|
} passwords;
|
148
|
|
149
|
#seekto 0x60;
|
150
|
|
151
|
struct freq_limit {
|
152
|
u16 start;
|
153
|
u16 stop;
|
154
|
};
|
155
|
|
156
|
struct {
|
157
|
struct freq_limit band_150;
|
158
|
struct freq_limit band_450;
|
159
|
struct freq_limit band_300;
|
160
|
struct freq_limit band_700;
|
161
|
struct freq_limit band_200;
|
162
|
} rx_freq_limits;
|
163
|
|
164
|
struct {
|
165
|
struct freq_limit band_150;
|
166
|
struct freq_limit band_450;
|
167
|
} tx_freq_limits;
|
168
|
|
169
|
#seekto 0x740;
|
170
|
|
171
|
struct {
|
172
|
u16 fm_freq;
|
173
|
} fm_chans[20];
|
174
|
|
175
|
// each band has its own configuration, essentially its default params
|
176
|
|
177
|
struct vfo {
|
178
|
u32 freq;
|
179
|
u32 offset;
|
180
|
u16 encqt;
|
181
|
u16 decqt;
|
182
|
u8 bit7_4:3,
|
183
|
qt:3,
|
184
|
bit1_0:2;
|
185
|
u8 bit7:1,
|
186
|
scan:1,
|
187
|
bit5:1,
|
188
|
pwr:2,
|
189
|
mod:1,
|
190
|
fm_dev:2;
|
191
|
u8 pad2:6,
|
192
|
shift:2;
|
193
|
u8 zeros;
|
194
|
};
|
195
|
|
196
|
#seekto 0x780;
|
197
|
|
198
|
struct {
|
199
|
struct vfo band_150;
|
200
|
struct vfo band_450;
|
201
|
} vfo_b;
|
202
|
|
203
|
#seekto 0x800;
|
204
|
|
205
|
struct {
|
206
|
struct vfo band_150;
|
207
|
struct vfo band_450;
|
208
|
struct vfo band_300;
|
209
|
struct vfo band_700;
|
210
|
struct vfo band_200;
|
211
|
} vfo_a;
|
212
|
|
213
|
// There are two independent radios, aka areas (as described
|
214
|
// in the manual as the upper and lower portions of the display...
|
215
|
|
216
|
struct area_conf {
|
217
|
u8 w_mode;
|
218
|
u16 w_chan;
|
219
|
u8 scan_grp;
|
220
|
u8 bcl;
|
221
|
u8 sql;
|
222
|
u8 cset;
|
223
|
u8 step;
|
224
|
u8 scan_mode;
|
225
|
u8 x869;
|
226
|
u8 scan_range;
|
227
|
u8 x86b;
|
228
|
u8 x86c;
|
229
|
u8 x86d;
|
230
|
u8 x86e;
|
231
|
u8 x86f;
|
232
|
};
|
233
|
|
234
|
#seekto 0x860;
|
235
|
|
236
|
struct area_conf a_conf;
|
237
|
|
238
|
#seekto 0x870;
|
239
|
|
240
|
struct area_conf b_conf;
|
241
|
|
242
|
#seekto 0x880;
|
243
|
|
244
|
struct {
|
245
|
u8 menu_avail;
|
246
|
u8 reset_avail;
|
247
|
u8 x882;
|
248
|
u8 x883;
|
249
|
u8 lang;
|
250
|
u8 x885;
|
251
|
u8 beep;
|
252
|
u8 auto_am;
|
253
|
u8 qt_sw;
|
254
|
u8 lock;
|
255
|
u8 x88a;
|
256
|
u8 pf1;
|
257
|
u8 pf2;
|
258
|
u8 pf3;
|
259
|
u8 s_mute;
|
260
|
u8 type_set;
|
261
|
u8 tot;
|
262
|
u8 toa;
|
263
|
u8 ptt_id;
|
264
|
u8 x893;
|
265
|
u8 id_dly;
|
266
|
u8 x895;
|
267
|
u8 voice_sw;
|
268
|
u8 s_tone;
|
269
|
u8 abr_lvl;
|
270
|
u8 ring_time;
|
271
|
u8 roger;
|
272
|
u8 x89b;
|
273
|
u8 abr;
|
274
|
u8 save_m;
|
275
|
u8 lock_m;
|
276
|
u8 auto_lk;
|
277
|
u8 rpt_ptt;
|
278
|
u8 rpt_spk;
|
279
|
u8 rpt_rct;
|
280
|
u8 prich_sw;
|
281
|
u16 pri_ch;
|
282
|
u8 x8a6;
|
283
|
u8 x8a7;
|
284
|
u8 dtmf_st;
|
285
|
u8 dtmf_tx;
|
286
|
u8 x8aa;
|
287
|
u8 sc_qt;
|
288
|
u8 apo_tmr;
|
289
|
u8 vox_grd;
|
290
|
u8 vox_dly;
|
291
|
u8 rpt_kpt;
|
292
|
struct {
|
293
|
u16 scan_st;
|
294
|
u16 scan_end;
|
295
|
} a;
|
296
|
struct {
|
297
|
u16 scan_st;
|
298
|
u16 scan_end;
|
299
|
} b;
|
300
|
u8 x8b8;
|
301
|
u8 x8b9;
|
302
|
u8 x8ba;
|
303
|
u8 ponmsg;
|
304
|
u8 blcdsw;
|
305
|
u8 bledsw;
|
306
|
u8 x8be;
|
307
|
u8 x8bf;
|
308
|
} settings;
|
309
|
|
310
|
|
311
|
#seekto 0x8c0;
|
312
|
struct {
|
313
|
u8 code[6];
|
314
|
char x8c6[10];
|
315
|
} my_callid;
|
316
|
|
317
|
#seekto 0x8d0;
|
318
|
struct {
|
319
|
u8 scc[6];
|
320
|
char x8d6[10];
|
321
|
} stun;
|
322
|
|
323
|
#seekto 0x8e0;
|
324
|
struct {
|
325
|
u16 wake;
|
326
|
u16 sleep;
|
327
|
} save[4];
|
328
|
|
329
|
#seekto 0x8f0;
|
330
|
struct {
|
331
|
char banner[16];
|
332
|
} display;
|
333
|
|
334
|
#seekto 0x940;
|
335
|
struct {
|
336
|
struct {
|
337
|
i16 scan_st;
|
338
|
i16 scan_end;
|
339
|
} addrs[10];
|
340
|
u8 x0968[8];
|
341
|
struct {
|
342
|
char name[8];
|
343
|
} names[10];
|
344
|
} scn_grps;
|
345
|
|
346
|
// this array of structs is marshalled via the R/WCHAN commands
|
347
|
#seekto 0xa00;
|
348
|
struct {
|
349
|
u32 rxfreq;
|
350
|
u32 txfreq;
|
351
|
u16 encQT;
|
352
|
u16 decQT;
|
353
|
u8 bit7_5:3, // all ones
|
354
|
qt:3,
|
355
|
bit1_0:2;
|
356
|
u8 bit7:1,
|
357
|
scan:1,
|
358
|
bit5:1,
|
359
|
pwr:2,
|
360
|
mod:1,
|
361
|
fm_dev:2;
|
362
|
u8 state;
|
363
|
u8 c3;
|
364
|
} chan_blk[999];
|
365
|
|
366
|
// nobody really sees this. It is marshalled with chan_blk
|
367
|
// in 4 entry chunks
|
368
|
#seekto 0x4900;
|
369
|
|
370
|
// Tracks with the index of chan_blk[]
|
371
|
struct {
|
372
|
char name[8];
|
373
|
} chan_name[999];
|
374
|
|
375
|
#seekto 0x7400;
|
376
|
struct {
|
377
|
u8 cid[6];
|
378
|
u8 pad[2];
|
379
|
}call_ids[20];
|
380
|
|
381
|
// This array tracks with the index of call_ids[]
|
382
|
struct {
|
383
|
char name[6];
|
384
|
char pad[2];
|
385
|
} cid_names[20];
|
386
|
"""
|
387
|
|
388
|
_MEM_FORMAT_9PX = """
|
389
|
#seekto 0x40;
|
390
|
|
391
|
struct {
|
392
|
char reset[6];
|
393
|
char x46[2];
|
394
|
char mode_sw[6];
|
395
|
char x4e;
|
396
|
} passwords;
|
397
|
|
398
|
#seekto 0x50;
|
399
|
struct {
|
400
|
char model[10];
|
401
|
} oemmodel;
|
402
|
|
403
|
#seekto 0x60;
|
404
|
struct {
|
405
|
u16 lim_150M_area_a_rxlower_limit; // 0x60
|
406
|
u16 lim_150M_area_a_rxupper_limit;
|
407
|
u16 lim_450M_rxlower_limit;
|
408
|
u16 lim_450M_rxupper_limit;
|
409
|
u16 lim_300M_rxlower_limit;
|
410
|
u16 lim_300M_rxupper_limit;
|
411
|
u16 lim_800M_rxlower_limit;
|
412
|
u16 lim_800M_rxupper_limit;
|
413
|
u16 lim_210M_rxlower_limit;
|
414
|
u16 lim_210M_rxupper_limit;
|
415
|
u16 lim_150M_Txlower_limit;
|
416
|
u16 lim_150M_Txupper_limit;
|
417
|
u16 lim_450M_Txlower_limit;
|
418
|
u16 lim_450M_Txupper_limit;
|
419
|
u16 lim_150M_area_b_rxlower_limit;
|
420
|
u16 lim_150M_area_b_rxupper_limit;
|
421
|
u16 unknown_lower_limit;
|
422
|
u16 unknown_upper_limit;
|
423
|
u16 unknown2_lower_limit;
|
424
|
u16 unknown2_upper_limit;
|
425
|
} limits;
|
426
|
|
427
|
#seekto 0x740;
|
428
|
|
429
|
struct {
|
430
|
u16 fm_freq;
|
431
|
} fm_chans[20];
|
432
|
|
433
|
// each band has its own configuration, essentially its default params
|
434
|
|
435
|
struct vfo {
|
436
|
u32 freq;
|
437
|
u32 offset;
|
438
|
u16 encqt;
|
439
|
u16 decqt;
|
440
|
u8 bit7_4:3,
|
441
|
qt:3,
|
442
|
bit1_0:2;
|
443
|
u8 bit7:1,
|
444
|
scan:1,
|
445
|
bit5:1,
|
446
|
pwr:2,
|
447
|
mod:1,
|
448
|
fm_dev:2;
|
449
|
u8 pad2:6,
|
450
|
shift:2;
|
451
|
u8 zeros;
|
452
|
};
|
453
|
|
454
|
#seekto 0x780;
|
455
|
|
456
|
struct {
|
457
|
struct vfo band_150;
|
458
|
struct vfo band_450;
|
459
|
} vfo_b;
|
460
|
|
461
|
#seekto 0x800;
|
462
|
|
463
|
struct {
|
464
|
struct vfo band_150;
|
465
|
struct vfo band_450;
|
466
|
struct vfo band_300;
|
467
|
struct vfo band_700;
|
468
|
struct vfo band_200;
|
469
|
} vfo_a;
|
470
|
|
471
|
// There are two independent radios, aka areas (as described
|
472
|
// in the manual as the upper and lower portions of the display...
|
473
|
|
474
|
struct area_conf {
|
475
|
u8 w_mode;
|
476
|
u16 w_chan; // fix issue in 9D Plus - w_chan is 2bytes
|
477
|
u8 scan_grp;
|
478
|
u8 bcl;
|
479
|
u8 sql;
|
480
|
u8 cset;
|
481
|
u8 step;
|
482
|
u8 scan_mode;
|
483
|
u8 x869;
|
484
|
u8 scan_range;
|
485
|
u8 x86b;
|
486
|
u8 x86c;
|
487
|
u8 x86d;
|
488
|
u8 x86e;
|
489
|
u8 x86f;
|
490
|
};
|
491
|
|
492
|
#seekto 0x860;
|
493
|
|
494
|
struct area_conf a_conf;
|
495
|
|
496
|
#seekto 0x870;
|
497
|
|
498
|
struct area_conf b_conf;
|
499
|
|
500
|
#seekto 0x880;
|
501
|
|
502
|
struct {
|
503
|
u8 menu_avail;
|
504
|
u8 reset_avail;
|
505
|
u8 act_area;
|
506
|
u8 tdr;
|
507
|
u8 lang;
|
508
|
u8 x885;
|
509
|
u8 beep;
|
510
|
u8 auto_am;
|
511
|
u8 qt_sw;
|
512
|
u8 lock;
|
513
|
u8 x88a;
|
514
|
u8 pf1;
|
515
|
u8 pf2;
|
516
|
u8 pf3;
|
517
|
u8 s_mute;
|
518
|
u8 type_set;
|
519
|
u8 tot;
|
520
|
u8 toa;
|
521
|
u8 ptt_id;
|
522
|
u8 x893;
|
523
|
u8 id_dly;
|
524
|
u8 x895;
|
525
|
u8 voice_sw;
|
526
|
u8 s_tone;
|
527
|
u8 abr_lvl;
|
528
|
u8 ring_time;
|
529
|
u8 roger;
|
530
|
u8 x89b;
|
531
|
u8 abr;
|
532
|
u8 save_m;
|
533
|
u8 lock_m;
|
534
|
u8 auto_lk;
|
535
|
u8 rpt_ptt;
|
536
|
u8 rpt_spk;
|
537
|
u8 rpt_rct;
|
538
|
u8 prich_sw;
|
539
|
u16 pri_ch;
|
540
|
u8 x8a6;
|
541
|
u8 x8a7;
|
542
|
u8 dtmf_st;
|
543
|
u8 dtmf_tx;
|
544
|
u8 x8aa;
|
545
|
u8 sc_qt;
|
546
|
u8 apo_tmr;
|
547
|
u8 vox_grd;
|
548
|
u8 vox_dly;
|
549
|
u8 rpt_kpt;
|
550
|
struct {
|
551
|
u16 scan_st;
|
552
|
u16 scan_end;
|
553
|
} a;
|
554
|
struct {
|
555
|
u16 scan_st;
|
556
|
u16 scan_end;
|
557
|
} b;
|
558
|
u8 x8b8;
|
559
|
u8 x8b9;
|
560
|
u8 x8ba;
|
561
|
u8 ponmsg;
|
562
|
u8 blcdsw;
|
563
|
u8 bledsw;
|
564
|
u8 x8be;
|
565
|
u8 x8bf;
|
566
|
|
567
|
} settings;
|
568
|
|
569
|
|
570
|
#seekto 0x8c0;
|
571
|
struct {
|
572
|
u8 code[6];
|
573
|
char x8c6[10];
|
574
|
} my_callid;
|
575
|
|
576
|
#seekto 0x8d0;
|
577
|
struct {
|
578
|
u8 scc[6];
|
579
|
char x8d6[10];
|
580
|
} stun;
|
581
|
|
582
|
#seekto 0x8e0;
|
583
|
struct {
|
584
|
u16 wake;
|
585
|
u16 sleep;
|
586
|
} save[4];
|
587
|
|
588
|
#seekto 0x8f0;
|
589
|
struct {
|
590
|
char banner[16];
|
591
|
} display;
|
592
|
|
593
|
#seekto 0x940;
|
594
|
struct {
|
595
|
struct {
|
596
|
i16 scan_st;
|
597
|
i16 scan_end;
|
598
|
} addrs[10];
|
599
|
u8 x0968[8];
|
600
|
struct {
|
601
|
char name[8];
|
602
|
} names[10];
|
603
|
} scn_grps;
|
604
|
|
605
|
// this array of structs is marshalled via the R/WCHAN commands
|
606
|
#seekto 0xa00;
|
607
|
struct {
|
608
|
u32 rxfreq;
|
609
|
u32 txfreq;
|
610
|
u16 encQT;
|
611
|
u16 decQT;
|
612
|
u8 bit7_5:3, // all ones
|
613
|
qt:3,
|
614
|
bit1_0:2;
|
615
|
u8 bit7:1,
|
616
|
scan:1,
|
617
|
bit5:1,
|
618
|
pwr:2,
|
619
|
mod:1,
|
620
|
fm_dev:2;
|
621
|
u8 state;
|
622
|
u8 c3;
|
623
|
} chan_blk[999];
|
624
|
|
625
|
// nobody really sees this. It is marshalled with chan_blk
|
626
|
// in 4 entry chunks
|
627
|
#seekto 0x4900;
|
628
|
|
629
|
// Tracks with the index of chan_blk[]
|
630
|
struct {
|
631
|
char name[8];
|
632
|
} chan_name[999];
|
633
|
|
634
|
#seekto 0x7400;
|
635
|
struct {
|
636
|
u8 cid[6];
|
637
|
u8 pad[2];
|
638
|
}call_ids[20];
|
639
|
|
640
|
// This array tracks with the index of call_ids[]
|
641
|
struct {
|
642
|
char name[6];
|
643
|
char pad[2];
|
644
|
} cid_names[20];
|
645
|
|
646
|
#seekto 0x7600;
|
647
|
struct {
|
648
|
u8 screen_mode;
|
649
|
} screen;
|
650
|
"""
|
651
|
|
652
|
|
653
|
# Support for the Wouxun KG-UV9D Plus and KG-UV9PX radio
|
654
|
# Serial coms are at 19200 baud
|
655
|
# The data is passed in variable length records
|
656
|
# Record structure:
|
657
|
# Offset Usage
|
658
|
# 0 start of record (\x7d)
|
659
|
# 1 Command (6 commands, see above)
|
660
|
# 2 direction (\xff PC-> Radio, \x00 Radio -> PC)
|
661
|
# 3 length of payload (excluding header/checksum) (n)
|
662
|
# 4 payload (n bytes)
|
663
|
# 4+n+1 checksum - byte sum (% 256) of bytes 1 -> 4+n
|
664
|
#
|
665
|
# Memory Read Records:
|
666
|
# the payload is 3 bytes, first 2 are offset (big endian),
|
667
|
# 3rd is number of bytes to read
|
668
|
# Memory Write Records:
|
669
|
# the maximum payload size (from the Wouxun software)
|
670
|
# seems to be 66 bytes (2 bytes location + 64 bytes data).
|
671
|
|
672
|
def _pkt_encode(op, payload):
|
673
|
"""Assemble a packet for the radio and encode it for transmission.
|
674
|
Yes indeed, the checksum we store is only 4 bits. Why?
|
675
|
I suspect it's a bug in the radio firmware guys didn't want to fix,
|
676
|
i.e. a typo 0xff -> 0xf..."""
|
677
|
|
678
|
data = bytearray()
|
679
|
data.append(0x7d) # tag that marks the beginning of the packet
|
680
|
data.append(op)
|
681
|
data.append(0xff) # 0xff is from app to radio
|
682
|
# calc checksum from op to end
|
683
|
cksum = op + 0xff
|
684
|
if (payload):
|
685
|
data.append(len(payload))
|
686
|
cksum += len(payload)
|
687
|
for byte in payload:
|
688
|
cksum += byte
|
689
|
data.append(byte)
|
690
|
else:
|
691
|
data.append(0x00)
|
692
|
# Yea, this is a 4 bit cksum (also known as a bug)
|
693
|
data.append(cksum & 0xf)
|
694
|
|
695
|
# now obfuscate by an xor starting with first payload byte ^ 0x52
|
696
|
# including the trailing cksum.
|
697
|
xorbits = 0x52
|
698
|
for i, byte in enumerate(data[4:]):
|
699
|
xord = xorbits ^ byte
|
700
|
data[i + 4] = xord
|
701
|
xorbits = xord
|
702
|
return(data)
|
703
|
|
704
|
|
705
|
def _pkt_decode(data):
|
706
|
"""Take a packet hot off the wire and decode it into clear text
|
707
|
and return the fields. We say <<cleartext>> here because all it
|
708
|
turns out to be is annoying obfuscation.
|
709
|
This is the inverse of pkt_decode"""
|
710
|
|
711
|
# we don't care about data[0].
|
712
|
# It is always 0x7d and not included in checksum
|
713
|
op = data[1]
|
714
|
direction = data[2]
|
715
|
bytecount = data[3]
|
716
|
|
717
|
# First un-obfuscate the payload and cksum
|
718
|
payload = bytearray()
|
719
|
xorbits = 0x52
|
720
|
for i, byte in enumerate(data[4:]):
|
721
|
payload.append(xorbits ^ byte)
|
722
|
xorbits = byte
|
723
|
|
724
|
# Calculate the checksum starting with the 3 bytes of the header
|
725
|
cksum = op + direction + bytecount
|
726
|
for byte in payload[:-1]:
|
727
|
cksum += byte
|
728
|
# yes, a 4 bit cksum to match the encode
|
729
|
cksum_match = (cksum & 0xf) == payload[-1]
|
730
|
if (not cksum_match):
|
731
|
LOG.debug(
|
732
|
"Checksum mismatch: %x != %x; " % (cksum, payload[-1]))
|
733
|
return (cksum_match, op, payload[:-1])
|
734
|
|
735
|
# UI callbacks to process input for mapping UI fields to memory cells
|
736
|
|
737
|
|
738
|
def freq2int(val, min, max):
|
739
|
"""Convert a frequency as a string to a u32. Units is Hz
|
740
|
"""
|
741
|
_freq = chirp_common.parse_freq(str(val))
|
742
|
if _freq > max or _freq < min:
|
743
|
raise InvalidValueError("Frequency %s is not with in %s-%s" %
|
744
|
(chirp_common.format_freq(_freq),
|
745
|
chirp_common.format_freq(min),
|
746
|
chirp_common.format_freq(max)))
|
747
|
return _freq
|
748
|
|
749
|
|
750
|
def int2freq(freq):
|
751
|
"""
|
752
|
Convert a u32 frequency to a string for UI data entry/display
|
753
|
This is stored in the radio as units of 10Hz which we compensate to Hz.
|
754
|
A value of -1 indicates <no frequency>, i.e. unused channel.
|
755
|
"""
|
756
|
if (int(freq) > 0):
|
757
|
f = chirp_common.format_freq(freq)
|
758
|
return f
|
759
|
else:
|
760
|
return ""
|
761
|
|
762
|
|
763
|
def freq2short(val, min, max):
|
764
|
"""Convert a frequency as a string to a u16 which is units of 10KHz
|
765
|
"""
|
766
|
_freq = chirp_common.parse_freq(str(val))
|
767
|
if _freq > max or _freq < min:
|
768
|
raise InvalidValueError("Frequency %s is not with in %s-%s" %
|
769
|
(chirp_common.format_freq(_freq),
|
770
|
chirp_common.format_freq(min),
|
771
|
chirp_common.format_freq(max)))
|
772
|
return _freq // 100000 & 0xFFFF
|
773
|
|
774
|
|
775
|
def short2freq(freq):
|
776
|
"""
|
777
|
Convert a short frequency to a string for UI data entry/display
|
778
|
This is stored in the radio as units of 10KHz which we
|
779
|
compensate to Hz.
|
780
|
A value of -1 indicates <no frequency>, i.e. unused channel.
|
781
|
"""
|
782
|
if (int(freq) > 0):
|
783
|
f = chirp_common.format_freq(freq * 100000)
|
784
|
return f
|
785
|
else:
|
786
|
return ""
|
787
|
|
788
|
|
789
|
def tone2short(t):
|
790
|
"""Convert a string tone or DCS to an encoded u16
|
791
|
"""
|
792
|
tone = str(t)
|
793
|
if tone == "----":
|
794
|
u16tone = 0x0000
|
795
|
elif tone[0] == 'D': # This is a DCS code
|
796
|
c = tone[1: -1]
|
797
|
code = int(c, 8)
|
798
|
if tone[-1] == 'I':
|
799
|
code |= 0x4000
|
800
|
u16tone = code | 0x8000
|
801
|
else: # This is an analog CTCSS
|
802
|
u16tone = int(tone[0:-2]+tone[-1]) & 0xffff # strip the '.'
|
803
|
return u16tone
|
804
|
|
805
|
|
806
|
def short2tone(tone):
|
807
|
""" Map a binary CTCSS/DCS to a string name for the tone
|
808
|
"""
|
809
|
if tone == 0 or tone == 0xffff:
|
810
|
ret = "----"
|
811
|
else:
|
812
|
code = tone & 0x3fff
|
813
|
if tone & 0x8000: # This is a DCS
|
814
|
if tone & 0x4000: # This is an inverse code
|
815
|
ret = "D%0.3oI" % code
|
816
|
else:
|
817
|
ret = "D%0.3oN" % code
|
818
|
else: # Just plain old analog CTCSS
|
819
|
ret = "%4.1f" % (code / 10.0)
|
820
|
return ret
|
821
|
|
822
|
|
823
|
def str2callid(val):
|
824
|
""" Convert caller id strings from callid2str.
|
825
|
"""
|
826
|
ascii2bin = "0123456789"
|
827
|
s = str(val).strip()
|
828
|
if len(s) < 3 or len(s) > 6:
|
829
|
raise InvalidValueError(
|
830
|
"Caller ID must be at least 3 and no more than 6 digits")
|
831
|
if s[0] == '0':
|
832
|
raise InvalidValueError(
|
833
|
"First digit of a Caller ID cannot be a zero '0'")
|
834
|
blk = bytearray()
|
835
|
for c in s:
|
836
|
if c not in ascii2bin:
|
837
|
raise InvalidValueError(
|
838
|
"Caller ID must be all digits 0x%x" % c)
|
839
|
b = (0xa, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9)[int(c)]
|
840
|
blk.append(b)
|
841
|
if len(blk) < 6:
|
842
|
blk.append(0xc) # EOL a short ID
|
843
|
if len(blk) < 6:
|
844
|
for i in range(0, (6 - len(blk))):
|
845
|
blk.append(0xf0)
|
846
|
return blk
|
847
|
|
848
|
|
849
|
def digits2str(digits, padding=' ', width=6):
|
850
|
"""Convert a password or SCC digit string to a string
|
851
|
Passwords are expanded to and must be 6 chars. Fill them with '0'
|
852
|
"""
|
853
|
|
854
|
bin2ascii = "0123456789"
|
855
|
digitsstr = ""
|
856
|
for i in range(0, 6):
|
857
|
b = digits[i].get_value()
|
858
|
if b == 0xc: # the digits EOL
|
859
|
break
|
860
|
if b >= 0xa:
|
861
|
raise InvalidValueError(
|
862
|
"Value has illegal byte 0x%x" % ord(b))
|
863
|
digitsstr += bin2ascii[b]
|
864
|
digitsstr = digitsstr.ljust(width, padding)
|
865
|
return digitsstr
|
866
|
|
867
|
|
868
|
def str2digits(val):
|
869
|
""" Callback for edited strings from digits2str.
|
870
|
"""
|
871
|
ascii2bin = " 0123456789"
|
872
|
s = str(val).strip()
|
873
|
if len(s) < 3 or len(s) > 6:
|
874
|
raise InvalidValueError(
|
875
|
"Value must be at least 3 and no more than 6 digits")
|
876
|
blk = bytearray()
|
877
|
for c in s:
|
878
|
if c not in ascii2bin:
|
879
|
raise InvalidValueError("Value must be all digits 0x%x" % c)
|
880
|
blk.append(int(c))
|
881
|
for i in range(len(blk), 6):
|
882
|
blk.append(0xc) # EOL a short ID
|
883
|
return blk
|
884
|
|
885
|
|
886
|
def name2str(name):
|
887
|
""" Convert a callid or scan group name to a string
|
888
|
Deal with fixed field padding (\0 or \0xff)
|
889
|
"""
|
890
|
|
891
|
namestr = ""
|
892
|
for i in range(0, len(name)):
|
893
|
b = ord(name[i].get_value())
|
894
|
if b != 0 and b != 0xff:
|
895
|
namestr += chr(b)
|
896
|
return namestr
|
897
|
|
898
|
|
899
|
def str2name(val, size=6, fillchar='\0', emptyfill='\0'):
|
900
|
""" Convert a string to a name. A name is a 6 element bytearray
|
901
|
with ascii chars.
|
902
|
"""
|
903
|
val = str(val).rstrip(' \t\r\n\0\0xff')
|
904
|
if len(val) == 0:
|
905
|
name = "".ljust(size, emptyfill)
|
906
|
else:
|
907
|
name = val.ljust(size, fillchar)
|
908
|
return name
|
909
|
|
910
|
|
911
|
def pw2str(pw):
|
912
|
"""Convert a password string (6 digits) to a string
|
913
|
Passwords must be 6 digits. If it is shorter, pad right with '0'
|
914
|
"""
|
915
|
pwstr = ""
|
916
|
ascii2bin = "0123456789"
|
917
|
for i in range(0, len(pw)):
|
918
|
b = pw[i].get_value()
|
919
|
if b not in ascii2bin:
|
920
|
raise InvalidValueError("Value must be digits 0-9")
|
921
|
pwstr += b
|
922
|
pwstr = pwstr.ljust(6, '0')
|
923
|
return pwstr
|
924
|
|
925
|
|
926
|
def str2pw(val):
|
927
|
"""Store a password from UI to memory obj
|
928
|
If we clear the password (make it go away), change the
|
929
|
empty string to '000000' since the radio must have *something*
|
930
|
Also, fill a < 6 digit pw with 0's
|
931
|
"""
|
932
|
ascii2bin = "0123456789"
|
933
|
val = str(val).rstrip(' \t\r\n\0\0xff')
|
934
|
if len(val) == 0: # a null password
|
935
|
val = "000000"
|
936
|
for i in range(0, len(val)):
|
937
|
b = val[i]
|
938
|
if b not in ascii2bin:
|
939
|
raise InvalidValueError("Value must be digits 0-9")
|
940
|
if len(val) == 0:
|
941
|
pw = "".ljust(6, '\0')
|
942
|
else:
|
943
|
pw = val.ljust(6, '0')
|
944
|
return pw
|
945
|
|
946
|
|
947
|
# Helpers to replace python2 things like confused str/byte
|
948
|
|
949
|
def _hex_print(data, addrfmt=None):
|
950
|
"""Return a hexdump-like encoding of @data
|
951
|
We expect data to be a bytearray, not a string.
|
952
|
Expanded from borrowed code to use the first 2 bytes as the address
|
953
|
per comm packet format.
|
954
|
"""
|
955
|
if addrfmt is None:
|
956
|
addrfmt = '%(addr)03i'
|
957
|
addr = 0
|
958
|
else: # assume first 2 bytes are address
|
959
|
a = struct.unpack(">H", data[0:2])
|
960
|
addr = a[0]
|
961
|
data = data[2:]
|
962
|
|
963
|
block_size = 16
|
964
|
|
965
|
lines = (len(data) // block_size)
|
966
|
if (len(data) % block_size > 0):
|
967
|
lines += 1
|
968
|
|
969
|
out = ""
|
970
|
left = len(data)
|
971
|
for block in range(0, lines):
|
972
|
addr += block * block_size
|
973
|
try:
|
974
|
out += addrfmt % locals()
|
975
|
except (OverflowError, ValueError, TypeError, KeyError):
|
976
|
out += "%03i" % addr
|
977
|
out += ': '
|
978
|
|
979
|
if left < block_size:
|
980
|
limit = left
|
981
|
else:
|
982
|
limit = block_size
|
983
|
|
984
|
for j in range(0, block_size):
|
985
|
if (j < limit):
|
986
|
out += "%02x " % data[(block * block_size) + j]
|
987
|
else:
|
988
|
out += " "
|
989
|
|
990
|
out += " "
|
991
|
|
992
|
for j in range(0, block_size):
|
993
|
|
994
|
if (j < limit):
|
995
|
_byte = data[(block * block_size) + j]
|
996
|
if _byte >= 0x20 and _byte < 0x7F:
|
997
|
out += "%s" % chr(_byte)
|
998
|
else:
|
999
|
out += "."
|
1000
|
else:
|
1001
|
out += " "
|
1002
|
out += "\n"
|
1003
|
if (left > block_size):
|
1004
|
left -= block_size
|
1005
|
|
1006
|
return out
|
1007
|
|
1008
|
|
1009
|
# Useful UI lists
|
1010
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0, 100.0]
|
1011
|
STEPS_9K = [2.5, 5.0, 6.25, 8.33, 10.0, 12.5, 25.0, 50.0, 100.0]
|
1012
|
S_TONES = [str(x) for x in [1000, 1450, 1750, 2100]]
|
1013
|
STEP_LIST = [str(x)+"kHz" for x in STEPS]
|
1014
|
STEP_LIST_9K = [str(x)+"kHz" for x in STEPS_9K]
|
1015
|
ROGER_LIST = ["Off", "Begin", "End", "Both"]
|
1016
|
TIMEOUT_LIST = [str(x) + "s" for x in range(15, 601, 15)]
|
1017
|
TOA_LIST = ["Off"] + ["%ds" % t for t in range(1, 11)]
|
1018
|
BANDWIDTH_LIST = ["Wide", "Narrow"]
|
1019
|
LANGUAGE_LIST = ["English", "Chinese"]
|
1020
|
LANGUAGE_LIST2 = ["English", "Chinese-DISABLED"]
|
1021
|
PF1KEY_LIST = ["OFF", "call id", "r-alarm", "SOS", "SF-TX"]
|
1022
|
PF1KEY_LIST9GX = ["OFF", "call id", "r-alarm", "SOS", "SF-TX", "Scan",
|
1023
|
"Second", "Lamp"]
|
1024
|
PF2KEY_LIST = ["OFF", "Scan", "Second", "Lamp", "SDF-DIR", "K-lamp"]
|
1025
|
PF2KEY_LIST9GX = ["OFF", "Scan", "Second", "Lamp", "K-lamp"]
|
1026
|
PF3KEY_LIST2 = ["OFF", "Call ID", "R-ALARM", "SOS", "SF-TX", "Scan",
|
1027
|
"Second", "Lamp"]
|
1028
|
PF3KEY_LIST9GX = ["OFF", "call id", "r-alarm", "SOS", "SF-TX", "Scan",
|
1029
|
"Second", "Lamp"]
|
1030
|
PF3KEY_LIST = ["OFF", "Call ID", "R-ALARM", "SOS", "SF-TX"]
|
1031
|
WORKMODE_LIST = ["VFO freq", "Channel No.", "Ch. No.+Freq.",
|
1032
|
"Ch. No.+Name"]
|
1033
|
BACKLIGHT_LIST = ["Off"] + ["%sS" % t for t in range(1, 31)] + \
|
1034
|
["Always On"]
|
1035
|
BACKLIGHT_BRIGHT_MIN = 1
|
1036
|
BACKLIGHT_BRIGHT_MAX = 5
|
1037
|
SAVE_MODES = ["Off", "1", "2", "3", "4"]
|
1038
|
LOCK_MODES = ["key-lk", "key+pg", "key+ptt", "all"]
|
1039
|
APO_TIMES = ["Off"] + ["%dm" % t for t in range(15, 151, 15)]
|
1040
|
OFFSET_LIST = ["none", "+", "-"]
|
1041
|
PONMSG_LIST = ["Battery Volts", "Bitmap"]
|
1042
|
PONMSG_LIST2 = ["Battery Volts", "Bitmap-DISABLED"]
|
1043
|
SPMUTE_LIST = ["QT", "QT*T", "QT&T"]
|
1044
|
DTMFST_LIST = ["Off", "DT-ST", "ANI-ST", "DT-ANI"]
|
1045
|
DTMF_TIMES = ["%d" % x for x in range(80, 501, 20)]
|
1046
|
PTTID_LIST = ["Off", "Begin", "End", "Both"]
|
1047
|
ID_DLY_LIST = ["%dms" % t for t in range(100, 3001, 100)]
|
1048
|
VOX_GRDS = ["Off"] + ["%dlevel" % l for l in range(1, 11)]
|
1049
|
VOX_DLYS = ["Off"] + ["%ds" % t for t in range(1, 5)]
|
1050
|
RPT_KPTS = ["Off"] + ["%dms" % t for t in range(100, 5001, 100)]
|
1051
|
ABR_LVL_MAP = [("1", 1), ("2", 2), ("3", 3), ("4", 4), ("5", 5)]
|
1052
|
LIST_1_5 = ["%s" % x for x in range(1, 6)]
|
1053
|
LIST_0_9 = ["%s" % x for x in range(0, 10)]
|
1054
|
LIST_1_20 = ["%s" % x for x in range(1, 21)]
|
1055
|
LIST_OFF_10 = ["Off"] + ["%s" % x for x in range(1, 11)]
|
1056
|
SCANGRP_LIST = ["All"] + ["%s" % x for x in range(1, 11)]
|
1057
|
SCANMODE_LIST = ["TO", "CO", "SE"]
|
1058
|
SCANRANGE_LIST = ["Current band", "freq range", "ALL"]
|
1059
|
SCQT_LIST = ["Decoder", "Encoder", "Both"]
|
1060
|
S_MUTE_LIST = ["off", "rx mute", "tx mute", "r/t mute"]
|
1061
|
POWER_LIST = ["Low", "Med", "High"]
|
1062
|
RPTMODE_LIST = ["Radio/Talkie", "One direction Repeater",
|
1063
|
"Two direction repeater"]
|
1064
|
TONE_LIST = ["----"] + ["%s" % str(t) for t in chirp_common.TONES] + \
|
1065
|
["D%0.3dN" % dts for dts in chirp_common.DTCS_CODES] + \
|
1066
|
["D%0.3dI" % dts for dts in chirp_common.DTCS_CODES]
|
1067
|
SCREEN_MODE_LIST = ["Classic", "Covert", "Day_1", "Day_2"]
|
1068
|
ACTIVE_AREA_LIST = ["Receiver A - Top", "Receiver B - Bottom"]
|
1069
|
TDR_LIST = ["TDR ON", "TDR OFF"]
|
1070
|
|
1071
|
|
1072
|
@directory.register
|
1073
|
class KGUV9DPlusRadio(chirp_common.CloneModeRadio,
|
1074
|
chirp_common.ExperimentalRadio):
|
1075
|
|
1076
|
"""Wouxun KG-UV9D Plus"""
|
1077
|
VENDOR = "Wouxun"
|
1078
|
MODEL = "KG-UV9D Plus"
|
1079
|
_model = b"KG-UV9D"
|
1080
|
_rev = b"00" # default rev for the radio I know about...
|
1081
|
_file_ident = b"kg-uv9d"
|
1082
|
NEEDS_COMPAT_SERIAL = False
|
1083
|
BAUD_RATE = 19200
|
1084
|
POWER_LEVELS = [chirp_common.PowerLevel("L", watts=1),
|
1085
|
chirp_common.PowerLevel("M", watts=2),
|
1086
|
chirp_common.PowerLevel("H", watts=5)]
|
1087
|
_mmap = ""
|
1088
|
|
1089
|
def _read_record(self):
|
1090
|
""" Read and validate the header of a radio reply.
|
1091
|
A record is a formatted byte stream as follows:
|
1092
|
0x7D All records start with this
|
1093
|
opcode This is in the set of legal commands.
|
1094
|
The radio reply matches the request
|
1095
|
dir This is the direction, 0xFF to the radio,
|
1096
|
0x00 from the radio.
|
1097
|
cnt Count of bytes in payload
|
1098
|
(not including the trailing checksum byte)
|
1099
|
<cnt bytes>
|
1100
|
<checksum byte>
|
1101
|
"""
|
1102
|
|
1103
|
# first get the header and validate it
|
1104
|
data = bytearray(self.pipe.read(4))
|
1105
|
if (len(data) < 4):
|
1106
|
raise errors.RadioError('Radio did not respond')
|
1107
|
if (data[0] != 0x7D):
|
1108
|
raise errors.RadioError(
|
1109
|
'Radio reply garbled (%02x)' % data[0])
|
1110
|
if (data[1] not in cmd_name):
|
1111
|
raise errors.RadioError(
|
1112
|
"Unrecognized opcode (%02x)" % data[1])
|
1113
|
if (data[2] != 0x00):
|
1114
|
raise errors.RadioError(
|
1115
|
"Direction incorrect. Got (%02x)" % data[2])
|
1116
|
payload_len = data[3]
|
1117
|
# don't forget to read the checksum byte
|
1118
|
data.extend(self.pipe.read(payload_len + 1))
|
1119
|
if (len(data) != (payload_len + 5)): # we got a short read
|
1120
|
raise errors.RadioError(
|
1121
|
"Radio reply wrong size. Wanted %d, got %d" %
|
1122
|
((payload_len + 1), (len(data) - 4)))
|
1123
|
return _pkt_decode(data)
|
1124
|
|
1125
|
def _write_record(self, cmd, payload=None):
|
1126
|
""" Write a request packet to the radio.
|
1127
|
"""
|
1128
|
|
1129
|
packet = _pkt_encode(cmd, payload)
|
1130
|
self.pipe.write(packet)
|
1131
|
|
1132
|
@classmethod
|
1133
|
def match_model(cls, filedata, filename):
|
1134
|
"""Look for bits in the file image and see if it looks
|
1135
|
like ours...
|
1136
|
TODO: there is a bunch of rubbish between 0x50 and 0x160
|
1137
|
that is still a known unknown
|
1138
|
"""
|
1139
|
return cls._file_ident in filedata[0x51:0x59].lower()
|
1140
|
|
1141
|
def _identify(self):
|
1142
|
""" Identify the radio
|
1143
|
The ident block identifies the radio and its capabilities.
|
1144
|
This block is always 78 bytes. The rev == '01' is the base
|
1145
|
radio and '02' seems to be the '-Plus' version.
|
1146
|
I don't really trust the content after the model and revision.
|
1147
|
One would assume this is pretty much constant data but I have
|
1148
|
seen differences between my radio and the dump named
|
1149
|
KG-UV9D-Plus-OutOfBox-Read.txt from bug #3509. The first
|
1150
|
five bands match the OEM windows
|
1151
|
app except the 350-400 band. The OOB trace has the 700MHz
|
1152
|
band different. This is speculation at this point.
|
1153
|
|
1154
|
TODO: This could be smarter and reject a radio not actually
|
1155
|
a UV9D...
|
1156
|
"""
|
1157
|
|
1158
|
for _i in range(0, 10): # retry 10 times if we get junk
|
1159
|
self._write_record(CMD_IDENT)
|
1160
|
chksum_match, op, _resp = self._read_record()
|
1161
|
if len(_resp) == 0:
|
1162
|
raise Exception("Radio not responding")
|
1163
|
if len(_resp) != 74:
|
1164
|
LOG.error(
|
1165
|
"Expected and IDENT reply of 78 bytes. Got (%d)" %
|
1166
|
len(_resp))
|
1167
|
continue
|
1168
|
if not chksum_match:
|
1169
|
LOG.error("Checksum error: retrying ident...")
|
1170
|
time.sleep(0.100)
|
1171
|
continue
|
1172
|
if op != CMD_IDENT:
|
1173
|
LOG.error("Expected IDENT reply. Got (%02x)" % op)
|
1174
|
continue
|
1175
|
LOG.debug("Got:\n%s" % _hex_print(_resp))
|
1176
|
(mod, rev) = struct.unpack(">7s2s", _resp[0:9])
|
1177
|
LOG.debug("Model %s, rev %s" % (mod, rev))
|
1178
|
if mod == self._model:
|
1179
|
self._rev = rev
|
1180
|
return
|
1181
|
else:
|
1182
|
raise Exception("Unable to identify radio")
|
1183
|
raise Exception("All retries to identify failed")
|
1184
|
|
1185
|
def process_mmap(self):
|
1186
|
if self._rev != b"02" and self._rev != b"00":
|
1187
|
# new revision found - log it and assume same map and proceed
|
1188
|
LOG.debug("Unrecognized model variation (%s) Using default Map" %
|
1189
|
self._rev)
|
1190
|
self._memobj = bitwise.parse(_MEM_FORMAT02, self._mmap)
|
1191
|
|
1192
|
def sync_in(self):
|
1193
|
""" Public sync_in
|
1194
|
Download contents of the radio. Throw errors back
|
1195
|
to the core if the radio does not respond.
|
1196
|
"""
|
1197
|
try:
|
1198
|
self._identify()
|
1199
|
self._mmap = self._do_download()
|
1200
|
self._write_record(CMD_HANGUP)
|
1201
|
except errors.RadioError:
|
1202
|
raise
|
1203
|
except Exception as e:
|
1204
|
LOG.exception('Unknown error during download process')
|
1205
|
raise errors.RadioError(
|
1206
|
"Failed to communicate with radio: %s" % e)
|
1207
|
self.process_mmap()
|
1208
|
|
1209
|
def sync_out(self):
|
1210
|
""" Public sync_out
|
1211
|
Upload the modified memory image into the radio.
|
1212
|
"""
|
1213
|
|
1214
|
try:
|
1215
|
self._identify()
|
1216
|
self._do_upload()
|
1217
|
self._write_record(CMD_HANGUP)
|
1218
|
except errors.RadioError:
|
1219
|
raise
|
1220
|
except Exception as e:
|
1221
|
raise errors.RadioError(
|
1222
|
"Failed to communicate with radio: %s" % e)
|
1223
|
return
|
1224
|
|
1225
|
def _do_download(self):
|
1226
|
""" Read the whole of radio memory in 64 byte chunks.
|
1227
|
We load the config space followed by loading memory channels.
|
1228
|
The radio seems to be a "clone" type and the memory channels
|
1229
|
are actually within the config space. There are separate
|
1230
|
commands (CMD_RCHAN, CMD_WCHAN) for reading channel memory but
|
1231
|
these seem to be a hack that can only do 4 channels at a time.
|
1232
|
Since the radio only supports 999, (can only support 3 chars
|
1233
|
in the display UI?) although the vendors app reads 1000
|
1234
|
channels, it hacks back to config writes (CMD_WCONF) for the
|
1235
|
last 3 channels and names. We keep it simple and just read
|
1236
|
the whole thing even though the vendor app doesn't. Channels
|
1237
|
are separate in their app simply because the radio protocol
|
1238
|
has read/write commands to access it. What they do is simply
|
1239
|
marshal the frequency+mode bits in 4 channel chunks followed
|
1240
|
by a separate chunk of for names. In config space, they are two
|
1241
|
separate arrays 1..999. Given that this space is not a
|
1242
|
multiple of 4, there is hackery on upload to do the writes to
|
1243
|
config space. See upload for this.
|
1244
|
"""
|
1245
|
|
1246
|
mem = bytearray(0x8000) # The radio's memory map is 32k
|
1247
|
for addr in range(0, 0x8000, 64):
|
1248
|
req = bytearray(struct.pack(">HB", addr, 64))
|
1249
|
self._write_record(CMD_RCONF, req)
|
1250
|
chksum_match, op, resp = self._read_record()
|
1251
|
if not chksum_match:
|
1252
|
LOG.debug(_hex_print(resp))
|
1253
|
raise Exception(
|
1254
|
"Checksum error while reading configuration (0x%x)" %
|
1255
|
addr)
|
1256
|
pa = struct.unpack(">H", resp[0:2])
|
1257
|
pkt_addr = pa[0]
|
1258
|
payload = resp[2:]
|
1259
|
if op != CMD_RCONF or addr != pkt_addr:
|
1260
|
raise Exception(
|
1261
|
"Expected CMD_RCONF (%x) reply. Got (%02x: %x)" %
|
1262
|
(addr, op, pkt_addr))
|
1263
|
LOG.debug("Config read (0x%x):\n%s" %
|
1264
|
(addr, _hex_print(resp, '0x%(addr)04x')))
|
1265
|
# Orig Code from 9D Plus driver was len(Payload)-1:
|
1266
|
# This Caused every 64th byte to = 00
|
1267
|
for i in range(0, len(payload)):
|
1268
|
mem[addr + i] = payload[i]
|
1269
|
if self.status_fn:
|
1270
|
status = chirp_common.Status()
|
1271
|
status.cur = addr
|
1272
|
status.max = 0x8000
|
1273
|
status.msg = "Cloning from radio"
|
1274
|
self.status_fn(status)
|
1275
|
return memmap.MemoryMapBytes(bytes(mem))
|
1276
|
|
1277
|
def _do_upload(self):
|
1278
|
"""Walk through the config map and write updated records to
|
1279
|
the radio. The config map contains only the regions we know
|
1280
|
about. We don't use the channel memory commands to avoid the
|
1281
|
hackery of using config write commands to fill in the last
|
1282
|
3 channel memory and names slots. As we discover other useful
|
1283
|
goodies in the map, we can add more slots...
|
1284
|
"""
|
1285
|
if (self.MODEL == "KG-UV9PX" or self.MODEL == "KG-UV9GX"):
|
1286
|
cfgmap = config_map2
|
1287
|
else:
|
1288
|
cfgmap = config_map
|
1289
|
|
1290
|
for start, blocksize, count in cfgmap:
|
1291
|
end = start + (blocksize * count)
|
1292
|
for addr in range(start, end, blocksize):
|
1293
|
req = bytearray(struct.pack(">H", addr))
|
1294
|
req.extend(self.get_mmap()[addr:addr + blocksize])
|
1295
|
self._write_record(CMD_WCONF, req)
|
1296
|
LOG.debug("Config write (0x%x):\n%s" %
|
1297
|
(addr, _hex_print(req)))
|
1298
|
chksum_match, op, ack = self._read_record()
|
1299
|
LOG.debug("Config write ack [%x]\n%s" %
|
1300
|
(addr, _hex_print(ack)))
|
1301
|
a = struct.unpack(">H", ack) # big endian short...
|
1302
|
ack = a[0]
|
1303
|
if not chksum_match or op != CMD_WCONF or addr != ack:
|
1304
|
msg = ""
|
1305
|
if not chksum_match:
|
1306
|
msg += "Checksum err, "
|
1307
|
if op != CMD_WCONF:
|
1308
|
msg += "cmd mismatch %x != %x, " % \
|
1309
|
(op, CMD_WCONF)
|
1310
|
if addr != ack:
|
1311
|
msg += "ack error %x != %x, " % (addr, ack)
|
1312
|
raise Exception("Radio did not ack block: %s error" % msg)
|
1313
|
if self.status_fn:
|
1314
|
status = chirp_common.Status()
|
1315
|
status.cur = addr
|
1316
|
status.max = 0x8000
|
1317
|
status.msg = "Cloning to radio"
|
1318
|
self.status_fn(status)
|
1319
|
|
1320
|
def get_features(self):
|
1321
|
""" Public get_features
|
1322
|
Return the features of this radio once we have identified
|
1323
|
it and gotten its bits
|
1324
|
"""
|
1325
|
rf = chirp_common.RadioFeatures()
|
1326
|
rf.has_settings = True
|
1327
|
rf.has_ctone = True
|
1328
|
rf.has_rx_dtcs = True
|
1329
|
rf.has_cross = True
|
1330
|
rf.has_tuning_step = False
|
1331
|
rf.has_bank = False
|
1332
|
rf.can_odd_split = True
|
1333
|
rf.valid_skips = ["", "S"]
|
1334
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
1335
|
rf.valid_cross_modes = [
|
1336
|
"Tone->Tone",
|
1337
|
"Tone->DTCS",
|
1338
|
"DTCS->Tone",
|
1339
|
"DTCS->",
|
1340
|
"->Tone",
|
1341
|
"->DTCS",
|
1342
|
"DTCS->DTCS",
|
1343
|
]
|
1344
|
rf.valid_modes = ["FM", "NFM", "AM"]
|
1345
|
rf.valid_power_levels = self.POWER_LEVELS
|
1346
|
rf.valid_name_length = 8
|
1347
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
1348
|
rf.valid_bands = [(108000000, 136000000), # Aircraft AM
|
1349
|
(136000000, 180000000), # supports 2m
|
1350
|
(230000000, 250000000),
|
1351
|
(350000000, 400000000),
|
1352
|
(400000000, 520000000), # supports 70cm
|
1353
|
(700000000, 985000000)]
|
1354
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
1355
|
rf.valid_tuning_steps = STEPS
|
1356
|
rf.memory_bounds = (1, 999) # 999 memories
|
1357
|
return rf
|
1358
|
|
1359
|
@classmethod
|
1360
|
def get_prompts(cls):
|
1361
|
rp = chirp_common.RadioPrompts()
|
1362
|
rp.experimental = ("This radio driver is currently under development. "
|
1363
|
"There are no known issues with it, but you should "
|
1364
|
"proceed with caution.")
|
1365
|
return rp
|
1366
|
|
1367
|
def get_raw_memory(self, number):
|
1368
|
return repr(self._memobj.chan_blk[number - 1])
|
1369
|
|
1370
|
def _get_tone(self, _mem, mem):
|
1371
|
"""Decode both the encode and decode CTSS/DCS codes from
|
1372
|
the memory channel and stuff them into the UI
|
1373
|
memory channel row.
|
1374
|
"""
|
1375
|
txtone = short2tone(_mem.encQT)
|
1376
|
rxtone = short2tone(_mem.decQT)
|
1377
|
pt = "N"
|
1378
|
pr = "N"
|
1379
|
|
1380
|
if txtone == "----":
|
1381
|
txmode = ""
|
1382
|
elif txtone[0] == "D":
|
1383
|
mem.dtcs = int(txtone[1:4])
|
1384
|
if txtone[4] == "I":
|
1385
|
pt = "R"
|
1386
|
txmode = "DTCS"
|
1387
|
else:
|
1388
|
mem.rtone = float(txtone)
|
1389
|
txmode = "Tone"
|
1390
|
|
1391
|
if rxtone == "----":
|
1392
|
rxmode = ""
|
1393
|
elif rxtone[0] == "D":
|
1394
|
mem.rx_dtcs = int(rxtone[1:4])
|
1395
|
if rxtone[4] == "I":
|
1396
|
pr = "R"
|
1397
|
rxmode = "DTCS"
|
1398
|
else:
|
1399
|
mem.ctone = float(rxtone)
|
1400
|
rxmode = "Tone"
|
1401
|
|
1402
|
if txmode == "Tone" and len(rxmode) == 0:
|
1403
|
mem.tmode = "Tone"
|
1404
|
elif (txmode == rxmode and txmode == "Tone" and
|
1405
|
mem.rtone == mem.ctone):
|
1406
|
mem.tmode = "TSQL"
|
1407
|
elif (txmode == rxmode and txmode == "DTCS" and
|
1408
|
mem.dtcs == mem.rx_dtcs):
|
1409
|
mem.tmode = "DTCS"
|
1410
|
elif (len(rxmode) + len(txmode)) > 0:
|
1411
|
mem.tmode = "Cross"
|
1412
|
mem.cross_mode = "%s->%s" % (txmode, rxmode)
|
1413
|
|
1414
|
mem.dtcs_polarity = pt + pr
|
1415
|
|
1416
|
LOG.debug("_get_tone: Got TX %s (%i) RX %s (%i)" %
|
1417
|
(txmode, _mem.encQT, rxmode, _mem.decQT))
|
1418
|
|
1419
|
def get_memory(self, number):
|
1420
|
""" Public get_memory
|
1421
|
Return the channel memory referenced by number to the UI.
|
1422
|
"""
|
1423
|
_mem = self._memobj.chan_blk[number - 1]
|
1424
|
_nam = self._memobj.chan_name[number - 1]
|
1425
|
|
1426
|
mem = chirp_common.Memory()
|
1427
|
mem.number = number
|
1428
|
_valid = _mem.state
|
1429
|
|
1430
|
# this code attempts to robustly decipher what Wouxun considers valid
|
1431
|
# memory locations on the 9 series radios and the factory CPS.
|
1432
|
# it appears they use a combination of State and Rx Freq to determine
|
1433
|
# validity rather than just the State value.
|
1434
|
# It is possible the State value is not even used at all.
|
1435
|
# Rather than continuously adding new Mem Valid values as they arise
|
1436
|
# assume any value other than 0xFF is likely valid and use Rx Freq to
|
1437
|
# further assess validity
|
1438
|
|
1439
|
if _mem.rxfreq == 0xFFFFFFFF:
|
1440
|
# Rx freq indicates empty channel memory
|
1441
|
# assume empty regardless of _valid and proceed to next channel
|
1442
|
if _valid not in INVALID_MEM_VALUES:
|
1443
|
# only log if _valid indicates the channel is not invalid
|
1444
|
LOG.debug("Rx Freq = 0xFFFFFFFF - Treating memory as empty")
|
1445
|
mem.empty = True
|
1446
|
return mem
|
1447
|
elif _valid in INVALID_MEM_VALUES:
|
1448
|
# Check for 9PX case where CPS creates a valid channel with
|
1449
|
# 0xFF for State - accept it as valid as long as Rx Freq is
|
1450
|
# <= max value
|
1451
|
if _mem.rxfreq > 99999999: # Max poss Value = 999.999999 MHz
|
1452
|
LOG.debug("State invalid-Rx Frq > Max: Treating mem as empty")
|
1453
|
mem.empty = True
|
1454
|
return mem
|
1455
|
else:
|
1456
|
LOG.debug("State invalid-Rx Freq valid: Assume chan valid")
|
1457
|
mem.empty = False
|
1458
|
else: # State not Invalid and Rx Freq not 0xFFFFFFFF
|
1459
|
if _mem.rxfreq > 99999999: # Max poss Value = 999.999999 MHz
|
1460
|
LOG.debug("Invalid Rx Frq: Treating mem as empty")
|
1461
|
mem.empty = True
|
1462
|
return mem
|
1463
|
else:
|
1464
|
mem.empty = False
|
1465
|
|
1466
|
mem.freq = int(_mem.rxfreq) * 10
|
1467
|
|
1468
|
if _mem.txfreq == 0xFFFFFFFF:
|
1469
|
# TX freq not set
|
1470
|
mem.duplex = "off"
|
1471
|
mem.offset = 0
|
1472
|
elif int(_mem.rxfreq) == int(_mem.txfreq):
|
1473
|
mem.duplex = ""
|
1474
|
mem.offset = 0
|
1475
|
elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000:
|
1476
|
mem.duplex = "split"
|
1477
|
mem.offset = int(_mem.txfreq) * 10
|
1478
|
else:
|
1479
|
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
|
1480
|
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
|
1481
|
|
1482
|
mem.name = name2str(_nam.name)
|
1483
|
|
1484
|
self._get_tone(_mem, mem)
|
1485
|
|
1486
|
mem.skip = "" if bool(_mem.scan) else "S"
|
1487
|
|
1488
|
mem.power = self.POWER_LEVELS[_mem.pwr]
|
1489
|
if _mem.mod == 1:
|
1490
|
mem.mode = "AM"
|
1491
|
elif _mem.fm_dev == 0:
|
1492
|
mem.mode = "FM"
|
1493
|
else:
|
1494
|
mem.mode = "NFM"
|
1495
|
# qt has no home in the UI
|
1496
|
return mem
|
1497
|
|
1498
|
def _set_tone(self, mem, _mem):
|
1499
|
"""Update the memory channel block CTCC/DCS tones
|
1500
|
from the UI fields
|
1501
|
"""
|
1502
|
def _set_dcs(code, pol):
|
1503
|
val = int("%i" % code, 8) | 0x8000
|
1504
|
if pol == "R":
|
1505
|
val |= 0x4000
|
1506
|
return val
|
1507
|
|
1508
|
rx_mode = tx_mode = None
|
1509
|
rxtone = txtone = 0x0000
|
1510
|
|
1511
|
if mem.tmode == "Tone":
|
1512
|
tx_mode = "Tone"
|
1513
|
txtone = int(mem.rtone * 10)
|
1514
|
elif mem.tmode == "TSQL":
|
1515
|
rx_mode = tx_mode = "Tone"
|
1516
|
rxtone = txtone = int(mem.ctone * 10)
|
1517
|
elif mem.tmode == "DTCS":
|
1518
|
tx_mode = rx_mode = "DTCS"
|
1519
|
txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
|
1520
|
rxtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1])
|
1521
|
elif mem.tmode == "Cross":
|
1522
|
tx_mode, rx_mode = mem.cross_mode.split("->")
|
1523
|
if tx_mode == "DTCS":
|
1524
|
txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
|
1525
|
elif tx_mode == "Tone":
|
1526
|
txtone = int(mem.rtone * 10)
|
1527
|
if rx_mode == "DTCS":
|
1528
|
rxtone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1])
|
1529
|
elif rx_mode == "Tone":
|
1530
|
rxtone = int(mem.ctone * 10)
|
1531
|
|
1532
|
_mem.decQT = rxtone
|
1533
|
_mem.encQT = txtone
|
1534
|
|
1535
|
LOG.debug("Set TX %s (%i) RX %s (%i)" %
|
1536
|
(tx_mode, _mem.encQT, rx_mode, _mem.decQT))
|
1537
|
|
1538
|
def set_memory(self, mem):
|
1539
|
""" Public set_memory
|
1540
|
Inverse of get_memory. Update the radio memory image
|
1541
|
from the mem object
|
1542
|
"""
|
1543
|
number = mem.number
|
1544
|
|
1545
|
_mem = self._memobj.chan_blk[number - 1]
|
1546
|
_nam = self._memobj.chan_name[number - 1]
|
1547
|
|
1548
|
if mem.empty:
|
1549
|
# consider putting in a check for chan # that is empty but
|
1550
|
# listed as one of the 2 working channels and change them
|
1551
|
# to channel 1 to be consistent with CPS and allow
|
1552
|
# complete deletion from radio. Otherwise,
|
1553
|
# a deleted channel will still show on radio with no name.
|
1554
|
# MRT implement the above working channel check
|
1555
|
if self._memobj.a_conf.w_chan == number:
|
1556
|
self._memobj.a_conf.w_chan = 1
|
1557
|
if self._memobj.b_conf.w_chan == number:
|
1558
|
self._memobj.b_conf.w_chan = 1
|
1559
|
|
1560
|
_mem.set_raw("\xFF" * (_mem.size() // 8))
|
1561
|
_nam.name = str2name("", 8, '\0', '\0')
|
1562
|
_mem.state = MEM_INVALID
|
1563
|
return
|
1564
|
|
1565
|
_mem.rxfreq = int(mem.freq / 10)
|
1566
|
if mem.duplex == "off":
|
1567
|
_mem.txfreq = 0xFFFFFFFF
|
1568
|
elif mem.duplex == "split":
|
1569
|
_mem.txfreq = int(mem.offset / 10)
|
1570
|
elif mem.duplex == "+":
|
1571
|
_mem.txfreq = int(mem.freq / 10) + int(mem.offset / 10)
|
1572
|
elif mem.duplex == "-":
|
1573
|
_mem.txfreq = int(mem.freq / 10) - int(mem.offset / 10)
|
1574
|
else:
|
1575
|
_mem.txfreq = int(mem.freq / 10)
|
1576
|
_mem.scan = int(mem.skip != "S")
|
1577
|
if mem.mode == "FM":
|
1578
|
_mem.mod = 0 # make sure forced AM is off
|
1579
|
_mem.fm_dev = 0
|
1580
|
elif mem.mode == "NFM":
|
1581
|
_mem.mod = 0
|
1582
|
_mem.fm_dev = 1
|
1583
|
elif mem.mode == "AM":
|
1584
|
_mem.mod = 1 # AM on
|
1585
|
_mem.fm_dev = 1 # set NFM bandwidth
|
1586
|
else:
|
1587
|
_mem.mod = 0
|
1588
|
_mem.fm_dev = 0 # Catchall default is FM
|
1589
|
# set the tone
|
1590
|
self._set_tone(mem, _mem)
|
1591
|
# set the power
|
1592
|
if mem.power:
|
1593
|
_mem.pwr = self.POWER_LEVELS.index(mem.power)
|
1594
|
else:
|
1595
|
_mem.pwr = True
|
1596
|
|
1597
|
# Set fields we can't access via the UI table to safe defaults
|
1598
|
_mem.qt = 0 # mute mode to QT
|
1599
|
_mem.bit5 = 0 # clear this bit to ensure accurate CPS power level
|
1600
|
_nam.name = str2name(mem.name, 8, '\0', '\0')
|
1601
|
_mem.state = MEM_VALID
|
1602
|
|
1603
|
# Build the UI configuration tabs
|
1604
|
# the channel memory tab is built by the core.
|
1605
|
# We have no control over it
|
1606
|
|
1607
|
def _core_tab(self):
|
1608
|
""" Build Core Configuration tab
|
1609
|
Radio settings common to all modes and areas go here.
|
1610
|
"""
|
1611
|
s = self._memobj.settings
|
1612
|
if (self.MODEL == "KG-UV9PX" or self.MODEL == "KG-UV9GX"):
|
1613
|
|
1614
|
sm = self._memobj.screen
|
1615
|
|
1616
|
cf = RadioSettingGroup("cfg_grp", "Configuration")
|
1617
|
|
1618
|
cf.append(RadioSetting("auto_am",
|
1619
|
"Auto detect AM (Menu 53)",
|
1620
|
RadioSettingValueBoolean(s.auto_am)))
|
1621
|
cf.append(RadioSetting("qt_sw",
|
1622
|
"Scan tone detect (Menu 59)",
|
1623
|
RadioSettingValueBoolean(s.qt_sw)))
|
1624
|
cf.append(
|
1625
|
RadioSetting("s_mute",
|
1626
|
"SubFreq Mute (Menu 60)",
|
1627
|
RadioSettingValueList(S_MUTE_LIST,
|
1628
|
S_MUTE_LIST[s.s_mute])))
|
1629
|
cf.append(
|
1630
|
RadioSetting("tot",
|
1631
|
"Transmit timeout Timer (Menu 10)",
|
1632
|
RadioSettingValueList(TIMEOUT_LIST,
|
1633
|
TIMEOUT_LIST[s.tot])))
|
1634
|
cf.append(
|
1635
|
RadioSetting("toa",
|
1636
|
"Transmit Timeout Alarm (Menu 11)",
|
1637
|
RadioSettingValueList(TOA_LIST,
|
1638
|
TOA_LIST[s.toa])))
|
1639
|
cf.append(
|
1640
|
RadioSetting("ptt_id",
|
1641
|
"PTT Caller ID mode (Menu 23)",
|
1642
|
RadioSettingValueList(PTTID_LIST,
|
1643
|
PTTID_LIST[s.ptt_id])))
|
1644
|
cf.append(
|
1645
|
RadioSetting("id_dly",
|
1646
|
"Caller ID Delay time (Menu 25)",
|
1647
|
RadioSettingValueList(ID_DLY_LIST,
|
1648
|
ID_DLY_LIST[s.id_dly])))
|
1649
|
cf.append(RadioSetting("voice_sw",
|
1650
|
"Voice Guide (Menu 12)",
|
1651
|
RadioSettingValueBoolean(s.voice_sw)))
|
1652
|
cf.append(RadioSetting("beep",
|
1653
|
"Keypad Beep (Menu 13)",
|
1654
|
RadioSettingValueBoolean(s.beep)))
|
1655
|
cf.append(
|
1656
|
RadioSetting("s_tone",
|
1657
|
"Side Tone (Menu 36)",
|
1658
|
RadioSettingValueList(S_TONES,
|
1659
|
S_TONES[s.s_tone])))
|
1660
|
cf.append(
|
1661
|
RadioSetting("ring_time",
|
1662
|
"Ring Time (Menu 26)",
|
1663
|
RadioSettingValueList(
|
1664
|
LIST_OFF_10,
|
1665
|
LIST_OFF_10[s.ring_time])))
|
1666
|
cf.append(
|
1667
|
RadioSetting("roger",
|
1668
|
"Roger Beep (Menu 9)",
|
1669
|
RadioSettingValueList(ROGER_LIST,
|
1670
|
ROGER_LIST[s.roger])))
|
1671
|
cf.append(RadioSetting("blcdsw",
|
1672
|
"Backlight (Menu 41)",
|
1673
|
RadioSettingValueBoolean(s.blcdsw)))
|
1674
|
cf.append(
|
1675
|
RadioSetting("abr",
|
1676
|
"Auto Backlight Time (Menu 1)",
|
1677
|
RadioSettingValueList(BACKLIGHT_LIST,
|
1678
|
BACKLIGHT_LIST[s.abr])))
|
1679
|
cf.append(
|
1680
|
RadioSetting("abr_lvl",
|
1681
|
"Backlight Brightness (Menu 27)",
|
1682
|
RadioSettingValueInteger(BACKLIGHT_BRIGHT_MIN,
|
1683
|
BACKLIGHT_BRIGHT_MAX,
|
1684
|
s.abr_lvl)))
|
1685
|
cf.append(RadioSetting("lock",
|
1686
|
"Keypad Lock",
|
1687
|
RadioSettingValueBoolean(s.lock)))
|
1688
|
cf.append(
|
1689
|
RadioSetting("lock_m",
|
1690
|
"Keypad Lock Mode (Menu 35)",
|
1691
|
RadioSettingValueList(LOCK_MODES,
|
1692
|
LOCK_MODES[s.lock_m])))
|
1693
|
cf.append(RadioSetting("auto_lk",
|
1694
|
"Keypad Autolock (Menu 34)",
|
1695
|
RadioSettingValueBoolean(s.auto_lk)))
|
1696
|
cf.append(RadioSetting("prich_sw",
|
1697
|
"Priority Channel Scan (Menu 33)",
|
1698
|
RadioSettingValueBoolean(s.prich_sw)))
|
1699
|
cf.append(RadioSetting("pri_ch",
|
1700
|
"Priority Channel (Menu 32)",
|
1701
|
RadioSettingValueInteger(1, 999,
|
1702
|
s.pri_ch)))
|
1703
|
cf.append(
|
1704
|
RadioSetting("dtmf_st",
|
1705
|
"DTMF Sidetone (Menu 22)",
|
1706
|
RadioSettingValueList(DTMFST_LIST,
|
1707
|
DTMFST_LIST[s.dtmf_st])))
|
1708
|
cf.append(RadioSetting("sc_qt",
|
1709
|
"Scan QT Save Mode (Menu 38)",
|
1710
|
RadioSettingValueList(
|
1711
|
SCQT_LIST,
|
1712
|
SCQT_LIST[s.sc_qt])))
|
1713
|
cf.append(
|
1714
|
RadioSetting("apo_tmr",
|
1715
|
"Automatic Power-off (Menu 39)",
|
1716
|
RadioSettingValueList(APO_TIMES,
|
1717
|
APO_TIMES[s.apo_tmr])))
|
1718
|
cf.append( # VOX "guard" is really VOX trigger audio level
|
1719
|
RadioSetting("vox_grd",
|
1720
|
"VOX level (Menu 7)",
|
1721
|
RadioSettingValueList(VOX_GRDS,
|
1722
|
VOX_GRDS[s.vox_grd])))
|
1723
|
cf.append(
|
1724
|
RadioSetting("vox_dly",
|
1725
|
"VOX Delay (Menu 37)",
|
1726
|
RadioSettingValueList(VOX_DLYS,
|
1727
|
VOX_DLYS[s.vox_dly])))
|
1728
|
cf.append(RadioSetting("bledsw",
|
1729
|
"Receive LED (Menu 42)",
|
1730
|
RadioSettingValueBoolean(s.bledsw)))
|
1731
|
|
1732
|
if (self.MODEL == "KG-UV9PX" or self.MODEL == "KG-UV9GX"):
|
1733
|
cf.append(RadioSetting("screen.screen_mode",
|
1734
|
"Screen Mode (Menu 62)",
|
1735
|
RadioSettingValueList(
|
1736
|
SCREEN_MODE_LIST,
|
1737
|
SCREEN_MODE_LIST[
|
1738
|
sm.screen_mode])))
|
1739
|
if (self.MODEL == "KG-UV9PX" or self.MODEL == "KG-UV9GX"):
|
1740
|
langlst = LANGUAGE_LIST2
|
1741
|
else:
|
1742
|
langlst = LANGUAGE_LIST
|
1743
|
cf.append(
|
1744
|
RadioSetting("lang",
|
1745
|
"Menu Language (Menu 14)",
|
1746
|
RadioSettingValueList(langlst,
|
1747
|
langlst[s.lang])))
|
1748
|
|
1749
|
if (self.MODEL == "KG-UV9PX" or self.MODEL == "KG-UV9GX"):
|
1750
|
ponmsglst = PONMSG_LIST2
|
1751
|
else:
|
1752
|
ponmsglst = PONMSG_LIST
|
1753
|
cf.append(RadioSetting("ponmsg",
|
1754
|
"Poweron message (Menu 40)",
|
1755
|
RadioSettingValueList(
|
1756
|
ponmsglst, ponmsglst[s.ponmsg])))
|
1757
|
return cf
|
1758
|
|
1759
|
def _repeater_tab(self):
|
1760
|
"""Repeater mode functions
|
1761
|
"""
|
1762
|
s = self._memobj.settings
|
1763
|
cf = RadioSettingGroup("repeater", "Repeater Functions")
|
1764
|
|
1765
|
cf.append(
|
1766
|
RadioSetting("type_set",
|
1767
|
"Radio Mode (Menu 43)",
|
1768
|
RadioSettingValueList(
|
1769
|
RPTMODE_LIST,
|
1770
|
RPTMODE_LIST[s.type_set])))
|
1771
|
cf.append(RadioSetting("rpt_ptt",
|
1772
|
"Repeater PTT (Menu 45)",
|
1773
|
RadioSettingValueBoolean(s.rpt_ptt)))
|
1774
|
cf.append(RadioSetting("rpt_spk",
|
1775
|
"Repeater Mode Speaker (Menu 44)",
|
1776
|
RadioSettingValueBoolean(s.rpt_spk)))
|
1777
|
cf.append(
|
1778
|
RadioSetting("rpt_kpt",
|
1779
|
"Repeater Hold Time (Menu 46)",
|
1780
|
RadioSettingValueList(RPT_KPTS,
|
1781
|
RPT_KPTS[s.rpt_kpt])))
|
1782
|
cf.append(RadioSetting("rpt_rct",
|
1783
|
"Repeater Receipt Tone (Menu 47)",
|
1784
|
RadioSettingValueBoolean(s.rpt_rct)))
|
1785
|
return cf
|
1786
|
|
1787
|
def _admin_tab(self):
|
1788
|
"""Admin functions not present in radio menu...
|
1789
|
These are admin functions not radio operation configuration
|
1790
|
"""
|
1791
|
|
1792
|
def apply_cid(setting, obj):
|
1793
|
c = str2callid(setting.value)
|
1794
|
obj.code = c
|
1795
|
|
1796
|
def apply_scc(setting, obj):
|
1797
|
c = str2digits(setting.value)
|
1798
|
obj.scc = c
|
1799
|
|
1800
|
def apply_mode_sw(setting, obj):
|
1801
|
pw = str2pw(setting.value)
|
1802
|
obj.mode_sw = pw
|
1803
|
setting.value = pw2str(obj.mode_sw)
|
1804
|
|
1805
|
def apply_reset(setting, obj):
|
1806
|
pw = str2pw(setting.value)
|
1807
|
obj.reset = pw
|
1808
|
setting.value = pw2str(obj.reset)
|
1809
|
|
1810
|
def apply_wake(setting, obj):
|
1811
|
obj.wake = int(setting.value)/10
|
1812
|
|
1813
|
def apply_sleep(setting, obj):
|
1814
|
obj.sleep = int(setting.value)/10
|
1815
|
|
1816
|
pw = self._memobj.passwords # admin passwords
|
1817
|
s = self._memobj.settings
|
1818
|
|
1819
|
cf = RadioSettingGroup("admin", "Admin Functions")
|
1820
|
|
1821
|
cf.append(RadioSetting("menu_avail",
|
1822
|
"Menu available in channel mode",
|
1823
|
RadioSettingValueBoolean(s.menu_avail)))
|
1824
|
mode_sw = RadioSettingValueString(0, 6,
|
1825
|
pw2str(pw.mode_sw), False)
|
1826
|
rs = RadioSetting("passwords.mode_sw",
|
1827
|
"Mode Switch Password", mode_sw)
|
1828
|
rs.set_apply_callback(apply_mode_sw, pw)
|
1829
|
cf.append(rs)
|
1830
|
|
1831
|
cf.append(RadioSetting("reset_avail",
|
1832
|
"Radio Reset Available",
|
1833
|
RadioSettingValueBoolean(s.reset_avail)))
|
1834
|
reset = RadioSettingValueString(0, 6, pw2str(pw.reset), False)
|
1835
|
rs = RadioSetting("passwords.reset",
|
1836
|
"Radio Reset Password", reset)
|
1837
|
rs.set_apply_callback(apply_reset, pw)
|
1838
|
cf.append(rs)
|
1839
|
|
1840
|
cf.append(
|
1841
|
RadioSetting("dtmf_tx",
|
1842
|
"DTMF Tx Duration",
|
1843
|
RadioSettingValueList(DTMF_TIMES,
|
1844
|
DTMF_TIMES[s.dtmf_tx])))
|
1845
|
cid = self._memobj.my_callid
|
1846
|
my_callid = RadioSettingValueString(3, 6,
|
1847
|
self.callid2str(cid.code), False)
|
1848
|
rs = RadioSetting("my_callid.code",
|
1849
|
"PTT Caller ID code (Menu 24)", my_callid)
|
1850
|
rs.set_apply_callback(apply_cid, cid)
|
1851
|
cf.append(rs)
|
1852
|
|
1853
|
stun = self._memobj.stun
|
1854
|
st = RadioSettingValueString(0, 6, digits2str(stun.scc), False)
|
1855
|
rs = RadioSetting("stun.scc", "Security code", st)
|
1856
|
rs.set_apply_callback(apply_scc, stun)
|
1857
|
cf.append(rs)
|
1858
|
|
1859
|
cf.append(
|
1860
|
RadioSetting("settings.save_m",
|
1861
|
"Save Mode (Menu 2)",
|
1862
|
RadioSettingValueList(SAVE_MODES,
|
1863
|
SAVE_MODES[s.save_m])))
|
1864
|
for i in range(0, 4):
|
1865
|
sm = self._memobj.save[i]
|
1866
|
wake = RadioSettingValueInteger(0, 18000, sm.wake * 10, 1)
|
1867
|
wf = RadioSetting("save[%i].wake" % i,
|
1868
|
"Save Mode %d Wake Time" % (i+1), wake)
|
1869
|
wf.set_apply_callback(apply_wake, sm)
|
1870
|
cf.append(wf)
|
1871
|
|
1872
|
slp = RadioSettingValueInteger(0, 18000, sm.sleep * 10, 1)
|
1873
|
wf = RadioSetting("save[%i].sleep" % i,
|
1874
|
"Save Mode %d Sleep Time" % (i+1), slp)
|
1875
|
wf.set_apply_callback(apply_sleep, sm)
|
1876
|
cf.append(wf)
|
1877
|
|
1878
|
_msg = str(self._memobj.display.banner).split("\0")[0]
|
1879
|
val = RadioSettingValueString(0, 16, _msg)
|
1880
|
val.set_mutable(True)
|
1881
|
cf.append(RadioSetting("display.banner",
|
1882
|
"Display Message", val))
|
1883
|
|
1884
|
if (self.MODEL == "KG-UV9PX" or self.MODEL == "KG-UV9GX"):
|
1885
|
_str = str(self._memobj.oemmodel.model).split("\0")[0]
|
1886
|
val = RadioSettingValueString(0, 10, _str)
|
1887
|
val.set_mutable(True)
|
1888
|
cf.append(RadioSetting("oemmodel.model",
|
1889
|
"Custom Sub-Receiver Message", val))
|
1890
|
|
1891
|
val = RadioSettingValueList(
|
1892
|
TDR_LIST,
|
1893
|
TDR_LIST[s.tdr])
|
1894
|
val.set_mutable(True)
|
1895
|
cf.append(RadioSetting("tdr", "TDR", val))
|
1896
|
|
1897
|
val = RadioSettingValueList(
|
1898
|
ACTIVE_AREA_LIST,
|
1899
|
ACTIVE_AREA_LIST[s.act_area])
|
1900
|
val.set_mutable(True)
|
1901
|
cf.append(RadioSetting("act_area", "Active Receiver(BAND)", val))
|
1902
|
|
1903
|
return cf
|
1904
|
|
1905
|
def _fm_tab(self):
|
1906
|
"""FM Broadcast channels
|
1907
|
"""
|
1908
|
def apply_fm(setting, obj):
|
1909
|
f = freq2short(setting.value, 76000000, 108000000)
|
1910
|
obj.fm_freq = f
|
1911
|
|
1912
|
fm = RadioSettingGroup("fm_chans", "FM Broadcast")
|
1913
|
for ch in range(0, 20):
|
1914
|
chan = self._memobj.fm_chans[ch]
|
1915
|
freq = RadioSettingValueString(0, 20,
|
1916
|
short2freq(chan.fm_freq))
|
1917
|
rs = RadioSetting("fm_%d" % (ch + 1),
|
1918
|
"FM Channel %d" % (ch + 1), freq)
|
1919
|
rs.set_apply_callback(apply_fm, chan)
|
1920
|
fm.append(rs)
|
1921
|
return fm
|
1922
|
|
1923
|
def _scan_grp(self):
|
1924
|
"""Scan groups
|
1925
|
"""
|
1926
|
def apply_name(setting, obj):
|
1927
|
name = str2name(setting.value, 8, '\0', '\0')
|
1928
|
obj.name = name
|
1929
|
|
1930
|
def apply_start(setting, obj):
|
1931
|
"""Do a callback to deal with RadioSettingInteger limitation
|
1932
|
on memory address resolution
|
1933
|
"""
|
1934
|
obj.scan_st = int(setting.value)
|
1935
|
|
1936
|
def apply_end(setting, obj):
|
1937
|
"""Do a callback to deal with RadioSettingInteger limitation
|
1938
|
on memory address resolution
|
1939
|
"""
|
1940
|
obj.scan_end = int(setting.value)
|
1941
|
|
1942
|
sgrp = self._memobj.scn_grps
|
1943
|
scan = RadioSettingGroup("scn_grps", "Channel Scanner Groups")
|
1944
|
for i in range(0, 10):
|
1945
|
s_grp = sgrp.addrs[i]
|
1946
|
s_name = sgrp.names[i]
|
1947
|
rs_name = RadioSettingValueString(0, 8,
|
1948
|
name2str(s_name.name))
|
1949
|
rs = RadioSetting("scn_grps.names[%i].name" % i,
|
1950
|
"Group %i Name" % (i + 1), rs_name)
|
1951
|
rs.set_apply_callback(apply_name, s_name)
|
1952
|
scan.append(rs)
|
1953
|
rs_st = RadioSettingValueInteger(1, 999, s_grp.scan_st)
|
1954
|
rs = RadioSetting("scn_grps.addrs[%i].scan_st" % i,
|
1955
|
"Starting Channel", rs_st)
|
1956
|
rs.set_apply_callback(apply_start, s_grp)
|
1957
|
scan.append(rs)
|
1958
|
rs_end = RadioSettingValueInteger(1, 999, s_grp.scan_end)
|
1959
|
rs = RadioSetting("scn_grps.addrs[%i].scan_end" % i,
|
1960
|
"Last Channel", rs_end)
|
1961
|
rs.set_apply_callback(apply_end, s_grp)
|
1962
|
scan.append(rs)
|
1963
|
return scan
|
1964
|
|
1965
|
def _callid_grp(self):
|
1966
|
"""Caller IDs to be recognized by radio
|
1967
|
This really should be a table in the UI
|
1968
|
"""
|
1969
|
def apply_callid(setting, obj):
|
1970
|
c = str2callid(setting.value)
|
1971
|
obj.cid = c
|
1972
|
|
1973
|
def apply_name(setting, obj):
|
1974
|
name = str2name(setting.value, 6, '\0', '\xff')
|
1975
|
obj.name = name
|
1976
|
|
1977
|
cid = RadioSettingGroup("callids", "Caller IDs")
|
1978
|
for i in range(0, 20):
|
1979
|
callid = self._memobj.call_ids[i]
|
1980
|
name = self._memobj.cid_names[i]
|
1981
|
c_name = RadioSettingValueString(0, 6, name2str(name.name))
|
1982
|
rs = RadioSetting("cid_names[%i].name" % i,
|
1983
|
"Caller ID %i Name" % (i + 1), c_name)
|
1984
|
rs.set_apply_callback(apply_name, name)
|
1985
|
cid.append(rs)
|
1986
|
c_id = RadioSettingValueString(0, 6,
|
1987
|
self.callid2str(callid.cid),
|
1988
|
False)
|
1989
|
rs = RadioSetting("call_ids[%i].cid" % i,
|
1990
|
"Caller ID Code", c_id)
|
1991
|
rs.set_apply_callback(apply_callid, callid)
|
1992
|
cid.append(rs)
|
1993
|
return cid
|
1994
|
|
1995
|
def _band_tab(self, area, band):
|
1996
|
""" Build a band tab inside a VFO/Area
|
1997
|
"""
|
1998
|
def apply_freq(setting, lo, hi, obj):
|
1999
|
f = freq2int(setting.value, lo, hi)
|
2000
|
obj.freq = f/10
|
2001
|
|
2002
|
def apply_offset(setting, obj):
|
2003
|
f = freq2int(setting.value, 0, 5000000)
|
2004
|
obj.offset = f/10
|
2005
|
|
2006
|
def apply_enc(setting, obj):
|
2007
|
t = tone2short(setting.value)
|
2008
|
obj.encqt = t
|
2009
|
|
2010
|
def apply_dec(setting, obj):
|
2011
|
t = tone2short(setting.value)
|
2012
|
obj.decqt = t
|
2013
|
|
2014
|
if area == "a":
|
2015
|
if band == 150:
|
2016
|
c = self._memobj.vfo_a.band_150
|
2017
|
lo = 108000000
|
2018
|
hi = 180000000
|
2019
|
elif band == 200:
|
2020
|
c = self._memobj.vfo_a.band_200
|
2021
|
lo = 230000000
|
2022
|
hi = 250000000
|
2023
|
elif band == 300:
|
2024
|
c = self._memobj.vfo_a.band_300
|
2025
|
lo = 350000000
|
2026
|
hi = 400000000
|
2027
|
elif band == 450:
|
2028
|
c = self._memobj.vfo_a.band_450
|
2029
|
lo = 400000000
|
2030
|
hi = 512000000
|
2031
|
else: # 700
|
2032
|
c = self._memobj.vfo_a.band_700
|
2033
|
lo = 700000000
|
2034
|
hi = 985000000
|
2035
|
else: # area 'b'
|
2036
|
if band == 150:
|
2037
|
c = self._memobj.vfo_b.band_150
|
2038
|
lo = 136000000
|
2039
|
hi = 180000000
|
2040
|
else: # 450
|
2041
|
c = self._memobj.vfo_b.band_450
|
2042
|
lo = 400000000
|
2043
|
hi = 512000000
|
2044
|
|
2045
|
prefix = "vfo_%s.band_%d" % (area, band)
|
2046
|
bf = RadioSettingGroup(prefix, "%dMHz Band" % band)
|
2047
|
freq = RadioSettingValueString(0, 15, int2freq(c.freq * 10))
|
2048
|
rs = RadioSetting(prefix + ".freq", "Rx Frequency", freq)
|
2049
|
rs.set_apply_callback(apply_freq, lo, hi, c)
|
2050
|
bf.append(rs)
|
2051
|
|
2052
|
off = RadioSettingValueString(0, 15, int2freq(c.offset * 10))
|
2053
|
rs = RadioSetting(prefix + ".offset", "Tx Offset (Menu 28)", off)
|
2054
|
rs.set_apply_callback(apply_offset, c)
|
2055
|
bf.append(rs)
|
2056
|
|
2057
|
rs = RadioSetting(prefix + ".encqt",
|
2058
|
"Encode QT (Menu 17,19)",
|
2059
|
RadioSettingValueList(TONE_LIST,
|
2060
|
short2tone(c.encqt)))
|
2061
|
rs.set_apply_callback(apply_enc, c)
|
2062
|
bf.append(rs)
|
2063
|
|
2064
|
rs = RadioSetting(prefix + ".decqt",
|
2065
|
"Decode QT (Menu 16,18)",
|
2066
|
RadioSettingValueList(TONE_LIST,
|
2067
|
short2tone(c.decqt)))
|
2068
|
rs.set_apply_callback(apply_dec, c)
|
2069
|
bf.append(rs)
|
2070
|
|
2071
|
bf.append(RadioSetting(prefix + ".qt",
|
2072
|
"Mute Mode (Menu 21)",
|
2073
|
RadioSettingValueList(SPMUTE_LIST,
|
2074
|
SPMUTE_LIST[c.qt])))
|
2075
|
bf.append(RadioSetting(prefix + ".scan",
|
2076
|
"Scan this (Menu 48)",
|
2077
|
RadioSettingValueBoolean(c.scan)))
|
2078
|
bf.append(RadioSetting(prefix + ".pwr",
|
2079
|
"Power (Menu 5)",
|
2080
|
RadioSettingValueList(
|
2081
|
POWER_LIST, POWER_LIST[c.pwr])))
|
2082
|
bf.append(RadioSetting(prefix + ".mod",
|
2083
|
"AM Modulation (Menu 54)",
|
2084
|
RadioSettingValueBoolean(c.mod)))
|
2085
|
bf.append(RadioSetting(prefix + ".fm_dev",
|
2086
|
"FM Deviation (Menu 4)",
|
2087
|
RadioSettingValueList(
|
2088
|
BANDWIDTH_LIST,
|
2089
|
BANDWIDTH_LIST[c.fm_dev])))
|
2090
|
bf.append(
|
2091
|
RadioSetting(prefix + ".shift",
|
2092
|
"Frequency Shift (Menu 6)",
|
2093
|
RadioSettingValueList(OFFSET_LIST,
|
2094
|
OFFSET_LIST[c.shift])))
|
2095
|
return bf
|
2096
|
|
2097
|
def _area_tab(self, area):
|
2098
|
"""Build a VFO tab
|
2099
|
"""
|
2100
|
def apply_scan_st(setting, scan_lo, scan_hi, obj):
|
2101
|
f = freq2short(setting.value, scan_lo, scan_hi)
|
2102
|
obj.scan_st = f
|
2103
|
|
2104
|
def apply_scan_end(setting, scan_lo, scan_hi, obj):
|
2105
|
f = freq2short(setting.value, scan_lo, scan_hi)
|
2106
|
obj.scan_end = f
|
2107
|
|
2108
|
if area == "a":
|
2109
|
desc = "Area A Settings"
|
2110
|
c = self._memobj.a_conf
|
2111
|
scan_lo = 108000000
|
2112
|
scan_hi = 985000000
|
2113
|
scan_rng = self._memobj.settings.a
|
2114
|
band_list = (150, 200, 300, 450, 700)
|
2115
|
else:
|
2116
|
desc = "Area B Settings"
|
2117
|
c = self._memobj.b_conf
|
2118
|
scan_lo = 136000000
|
2119
|
scan_hi = 512000000
|
2120
|
scan_rng = self._memobj.settings.b
|
2121
|
band_list = (150, 450)
|
2122
|
|
2123
|
prefix = "%s_conf" % area
|
2124
|
af = RadioSettingGroup(prefix, desc)
|
2125
|
af.append(
|
2126
|
RadioSetting(prefix + ".w_mode",
|
2127
|
"Workmode",
|
2128
|
RadioSettingValueList(
|
2129
|
WORKMODE_LIST,
|
2130
|
WORKMODE_LIST[c.w_mode])))
|
2131
|
af.append(RadioSetting(prefix + ".w_chan",
|
2132
|
"Channel",
|
2133
|
RadioSettingValueInteger(1, 999,
|
2134
|
c.w_chan)))
|
2135
|
af.append(
|
2136
|
RadioSetting(prefix + ".scan_grp",
|
2137
|
"Scan Group (Menu 49)",
|
2138
|
RadioSettingValueList(
|
2139
|
SCANGRP_LIST,
|
2140
|
SCANGRP_LIST[c.scan_grp])))
|
2141
|
af.append(RadioSetting(prefix + ".bcl",
|
2142
|
"Busy Channel Lock-out (Menu 15)",
|
2143
|
RadioSettingValueBoolean(c.bcl)))
|
2144
|
af.append(
|
2145
|
RadioSetting(prefix + ".sql",
|
2146
|
"Squelch Level (Menu 8)",
|
2147
|
RadioSettingValueList(LIST_0_9,
|
2148
|
LIST_0_9[c.sql])))
|
2149
|
af.append(
|
2150
|
RadioSetting(prefix + ".cset",
|
2151
|
"Call ID Group (Menu 52)",
|
2152
|
RadioSettingValueList(LIST_1_20,
|
2153
|
LIST_1_20[c.cset])))
|
2154
|
af.append(
|
2155
|
RadioSetting(prefix + ".step",
|
2156
|
"Frequency Step (Menu 3)",
|
2157
|
RadioSettingValueList(
|
2158
|
STEP_LIST, STEP_LIST[c.step])))
|
2159
|
af.append(
|
2160
|
RadioSetting(prefix + ".scan_mode",
|
2161
|
"Scan Mode (Menu 20)",
|
2162
|
RadioSettingValueList(
|
2163
|
SCANMODE_LIST,
|
2164
|
SCANMODE_LIST[c.scan_mode])))
|
2165
|
af.append(
|
2166
|
RadioSetting(prefix + ".scan_range",
|
2167
|
"Scan Range (Menu 50)",
|
2168
|
RadioSettingValueList(
|
2169
|
SCANRANGE_LIST,
|
2170
|
SCANRANGE_LIST[c.scan_range])))
|
2171
|
st = RadioSettingValueString(0, 15,
|
2172
|
short2freq(scan_rng.scan_st))
|
2173
|
rs = RadioSetting("settings.%s.scan_st" % area,
|
2174
|
"Frequency Scan Start", st)
|
2175
|
rs.set_apply_callback(apply_scan_st, scan_lo, scan_hi, scan_rng)
|
2176
|
af.append(rs)
|
2177
|
|
2178
|
end = RadioSettingValueString(0, 15,
|
2179
|
short2freq(scan_rng.scan_end))
|
2180
|
rs = RadioSetting("settings.%s.scan_end" % area,
|
2181
|
"Frequency Scan End", end)
|
2182
|
rs.set_apply_callback(apply_scan_end, scan_lo, scan_hi,
|
2183
|
scan_rng)
|
2184
|
af.append(rs)
|
2185
|
# Each area has its own set of bands
|
2186
|
for band in (band_list):
|
2187
|
af.append(self._band_tab(area, band))
|
2188
|
return af
|
2189
|
|
2190
|
def _key_tab(self):
|
2191
|
"""Build radio key/button menu
|
2192
|
"""
|
2193
|
s = self._memobj.settings
|
2194
|
if self.MODEL == "KG-UV9PX":
|
2195
|
pfkey1 = PF1KEY_LIST
|
2196
|
pfkey2 = PF2KEY_LIST
|
2197
|
pfkey3 = PF3KEY_LIST2
|
2198
|
elif self.MODEL == "KG-UV9GX":
|
2199
|
pfkey1 = PF1KEY_LIST9GX
|
2200
|
pfkey2 = PF2KEY_LIST9GX
|
2201
|
pfkey3 = PF3KEY_LIST9GX
|
2202
|
else:
|
2203
|
pfkey1 = PF1KEY_LIST
|
2204
|
pfkey2 = PF2KEY_LIST
|
2205
|
pfkey3 = PF3KEY_LIST
|
2206
|
|
2207
|
kf = RadioSettingGroup("key_grp", "Key Settings")
|
2208
|
|
2209
|
kf.append(RadioSetting("settings.pf1",
|
2210
|
"PF1 Key function (Menu 55)",
|
2211
|
RadioSettingValueList(
|
2212
|
pfkey1,
|
2213
|
pfkey1[s.pf1])))
|
2214
|
kf.append(RadioSetting("settings.pf2",
|
2215
|
"PF2 Key function (Menu 56)",
|
2216
|
RadioSettingValueList(
|
2217
|
pfkey2,
|
2218
|
pfkey2[s.pf2])))
|
2219
|
|
2220
|
kf.append(RadioSetting("settings.pf3",
|
2221
|
"PF3 Key function (Menu 57)",
|
2222
|
RadioSettingValueList(
|
2223
|
pfkey3,
|
2224
|
pfkey3[s.pf3])))
|
2225
|
return kf
|
2226
|
|
2227
|
def _fl_tab(self):
|
2228
|
"""Build the frequency limits tab
|
2229
|
"""
|
2230
|
|
2231
|
# The stop limits in the factory KG-UV9D Mate memory image are 1MHz
|
2232
|
# higher than the published specs. The settings panel will crash if
|
2233
|
# it encounters a value outside of these ranges.
|
2234
|
hard_limits = {
|
2235
|
"band_150": (108000000, 181000000),
|
2236
|
"band_450": (400000000, 513000000),
|
2237
|
"band_300": (350000000, 401000000),
|
2238
|
"band_700": (700000000, 987000000),
|
2239
|
"band_200": (230000000, 251000000)
|
2240
|
}
|
2241
|
|
2242
|
def apply_freq_start(setting, low, high, obj):
|
2243
|
f = freq2short(setting.value, low, high)
|
2244
|
obj.start = f
|
2245
|
|
2246
|
def apply_freq_stop(setting, low, high, obj):
|
2247
|
"""Sets the stop limit to 1MHz below the input value"""
|
2248
|
|
2249
|
# The firmware has an off-by-1MHz error with stop limits.
|
2250
|
# If you set the stop limit to 1480 (148MHz), you can still tune
|
2251
|
# up to 148.99MHz. To compensate for this,
|
2252
|
# we subtract 10 increments of 100MHz before storing the value.
|
2253
|
f = freq2short(setting.value, low, high) - 10
|
2254
|
obj.stop = f
|
2255
|
|
2256
|
fl = RadioSettingGroup("freq_limit_grp", "Frequency Limits")
|
2257
|
|
2258
|
rx = self._memobj.rx_freq_limits
|
2259
|
tx = self._memobj.tx_freq_limits
|
2260
|
|
2261
|
for rx_band in rx.items():
|
2262
|
name, limits = rx_band
|
2263
|
|
2264
|
start_freq = RadioSettingValueString(1,
|
2265
|
20,
|
2266
|
short2freq(limits.start))
|
2267
|
start_rs = RadioSetting("rx_start_" + name,
|
2268
|
name + " Receive Start",
|
2269
|
start_freq)
|
2270
|
start_rs.set_apply_callback(apply_freq_start,
|
2271
|
hard_limits[name][0],
|
2272
|
hard_limits[name][1],
|
2273
|
limits)
|
2274
|
fl.append(start_rs)
|
2275
|
|
2276
|
# Add 10 increments of 100MHz before displaying to compensate for
|
2277
|
# the firmware off-by-1MHz problem.
|
2278
|
stop_freq = RadioSettingValueString(1,
|
2279
|
20,
|
2280
|
short2freq(limits.stop + 10))
|
2281
|
stop_rs = RadioSetting("rx_stop_" + name,
|
2282
|
name + " Receive Stop",
|
2283
|
stop_freq)
|
2284
|
stop_rs.set_apply_callback(apply_freq_stop,
|
2285
|
hard_limits[name][0],
|
2286
|
hard_limits[name][1],
|
2287
|
limits)
|
2288
|
fl.append(stop_rs)
|
2289
|
|
2290
|
for tx_band in tx.items():
|
2291
|
name, limits = tx_band
|
2292
|
|
2293
|
start_freq = RadioSettingValueString(1,
|
2294
|
20,
|
2295
|
short2freq(limits.start))
|
2296
|
start_rs = RadioSetting("tx_start_" + name,
|
2297
|
name + " Transmit Start",
|
2298
|
start_freq)
|
2299
|
start_rs.set_apply_callback(apply_freq_start,
|
2300
|
hard_limits[name][0],
|
2301
|
hard_limits[name][1], limits)
|
2302
|
fl.append(start_rs)
|
2303
|
|
2304
|
# Add 10 increments of 100MHz before displaying to compensate for
|
2305
|
# the firmware off-by-1MHz problem.
|
2306
|
stop_freq = RadioSettingValueString(1,
|
2307
|
20,
|
2308
|
short2freq(limits.stop + 10))
|
2309
|
stop_rs = RadioSetting("tx_stop_" + name,
|
2310
|
name + " Transmit Stop",
|
2311
|
stop_freq)
|
2312
|
stop_rs.set_apply_callback(apply_freq_stop,
|
2313
|
hard_limits[name][0],
|
2314
|
hard_limits[name][1],
|
2315
|
limits)
|
2316
|
fl.append(stop_rs)
|
2317
|
|
2318
|
return fl
|
2319
|
|
2320
|
def _get_settings(self):
|
2321
|
"""Build the radio configuration settings menus
|
2322
|
"""
|
2323
|
|
2324
|
core_grp = self._core_tab()
|
2325
|
fm_grp = self._fm_tab()
|
2326
|
area_a_grp = self._area_tab("a")
|
2327
|
area_b_grp = self._area_tab("b")
|
2328
|
key_grp = self._key_tab()
|
2329
|
scan_grp = self._scan_grp()
|
2330
|
callid_grp = self._callid_grp()
|
2331
|
admin_grp = self._admin_tab()
|
2332
|
rpt_grp = self._repeater_tab()
|
2333
|
freq_limit_grp = self._fl_tab()
|
2334
|
|
2335
|
core_grp.append(key_grp)
|
2336
|
core_grp.append(admin_grp)
|
2337
|
core_grp.append(rpt_grp)
|
2338
|
core_grp.append(freq_limit_grp)
|
2339
|
group = RadioSettings(core_grp,
|
2340
|
area_a_grp,
|
2341
|
area_b_grp,
|
2342
|
fm_grp,
|
2343
|
scan_grp,
|
2344
|
callid_grp
|
2345
|
)
|
2346
|
return group
|
2347
|
|
2348
|
def get_settings(self):
|
2349
|
""" Public build out linkage between radio settings and UI
|
2350
|
"""
|
2351
|
try:
|
2352
|
return self._get_settings()
|
2353
|
except Exception:
|
2354
|
import traceback
|
2355
|
LOG.error("Failed to parse settings: %s",
|
2356
|
traceback.format_exc())
|
2357
|
return None
|
2358
|
|
2359
|
def _is_freq(self, element):
|
2360
|
"""This is a hack to smoke out whether we need to do
|
2361
|
frequency translations for otherwise innocent u16s and u32s
|
2362
|
"""
|
2363
|
return "rxfreq" in element.get_name() or \
|
2364
|
"txfreq" in element.get_name() or \
|
2365
|
"scan_st" in element.get_name() or \
|
2366
|
"scan_end" in element.get_name() or \
|
2367
|
"offset" in element.get_name() or \
|
2368
|
"fm_stop" in element.get_name()
|
2369
|
|
2370
|
def _is_limit(self, element):
|
2371
|
return "lower_limit" in element.get_name() or\
|
2372
|
"upper_limit" in element.get_name()
|
2373
|
|
2374
|
def set_settings(self, settings):
|
2375
|
""" Public update radio settings via UI callback
|
2376
|
A lot of this should be in common code....
|
2377
|
"""
|
2378
|
|
2379
|
for element in settings:
|
2380
|
if not isinstance(element, RadioSetting):
|
2381
|
LOG.debug("set_settings: not instance %s" %
|
2382
|
element.get_name())
|
2383
|
self.set_settings(element)
|
2384
|
continue
|
2385
|
else:
|
2386
|
try:
|
2387
|
if "." in element.get_name():
|
2388
|
bits = element.get_name().split(".")
|
2389
|
obj = self._memobj
|
2390
|
for bit in bits[:-1]:
|
2391
|
# decode an array index
|
2392
|
if "[" in bit and "]" in bit:
|
2393
|
bit, index = bit.split("[", 1)
|
2394
|
index, junk = index.split("]", 1)
|
2395
|
index = int(index)
|
2396
|
obj = getattr(obj, bit)[index]
|
2397
|
else:
|
2398
|
obj = getattr(obj, bit)
|
2399
|
setting = bits[-1]
|
2400
|
else:
|
2401
|
obj = self._memobj.settings
|
2402
|
setting = element.get_name()
|
2403
|
|
2404
|
if element.has_apply_callback():
|
2405
|
LOG.debug("Using apply callback")
|
2406
|
element.run_apply_callback()
|
2407
|
else:
|
2408
|
LOG.debug("Setting %s = %s" %
|
2409
|
(setting, element.value))
|
2410
|
if self._is_freq(element):
|
2411
|
setattr(obj, setting, int(element.value)/10)
|
2412
|
elif self._is_limit(element):
|
2413
|
setattr(obj, setting, int(element.value)*10)
|
2414
|
else:
|
2415
|
setattr(obj, setting, element.value)
|
2416
|
except Exception as e:
|
2417
|
LOG.debug("set_settings: Exception with %s" %
|
2418
|
element.get_name())
|
2419
|
raise
|
2420
|
|
2421
|
def callid2str(self, cid):
|
2422
|
"""Caller ID per MDC-1200 spec? Must be 3-6 digits (100 - 999999).
|
2423
|
One digit (binary) per byte, terminated with '0xc'
|
2424
|
"""
|
2425
|
|
2426
|
bin2ascii = " 1234567890"
|
2427
|
cidstr = ""
|
2428
|
for i in range(0, 6):
|
2429
|
b = cid[i].get_value()
|
2430
|
if b == 0xc: # the cid EOL
|
2431
|
break
|
2432
|
if b == 0 or b > 0xa:
|
2433
|
raise InvalidValueError(
|
2434
|
"Caller ID code has illegal byte 0x%x" % b)
|
2435
|
cidstr += bin2ascii[b]
|
2436
|
return cidstr
|
2437
|
|
2438
|
|
2439
|
@directory.register
|
2440
|
class KGUV9PXRadio(KGUV9DPlusRadio):
|
2441
|
|
2442
|
"""Wouxun KG-UV9PX"""
|
2443
|
VENDOR = "Wouxun"
|
2444
|
MODEL = "KG-UV9PX"
|
2445
|
_model = b"KG-UV9D"
|
2446
|
_rev = b"02" # default rev for the radio I know about...
|
2447
|
_file_ident = b"kg-uv9px"
|
2448
|
NEEDS_COMPAT_SERIAL = False
|
2449
|
|
2450
|
def process_mmap(self):
|
2451
|
if self._rev != b"02" and self._rev != b"00":
|
2452
|
# new revision found - log it and assume same map and proceed
|
2453
|
LOG.debug("Unrecognized model variation (%s) Using default Map" %
|
2454
|
self._rev)
|
2455
|
self._memobj = bitwise.parse(_MEM_FORMAT_9PX, self._mmap)
|
2456
|
|
2457
|
def get_features(self):
|
2458
|
""" Public get_features
|
2459
|
Return the features of this radio once we have identified
|
2460
|
it and gotten its bits
|
2461
|
"""
|
2462
|
rf = chirp_common.RadioFeatures()
|
2463
|
rf.has_settings = True
|
2464
|
rf.has_ctone = True
|
2465
|
rf.has_rx_dtcs = True
|
2466
|
rf.has_cross = True
|
2467
|
rf.has_tuning_step = False
|
2468
|
rf.has_bank = False
|
2469
|
rf.can_odd_split = True
|
2470
|
rf.valid_skips = ["", "S"]
|
2471
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
2472
|
rf.valid_cross_modes = [
|
2473
|
"Tone->Tone",
|
2474
|
"Tone->DTCS",
|
2475
|
"DTCS->Tone",
|
2476
|
"DTCS->",
|
2477
|
"->Tone",
|
2478
|
"->DTCS",
|
2479
|
"DTCS->DTCS",
|
2480
|
]
|
2481
|
rf.valid_modes = ["FM", "NFM", "AM"]
|
2482
|
rf.valid_power_levels = self.POWER_LEVELS
|
2483
|
rf.valid_name_length = 8
|
2484
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
2485
|
rf.valid_bands = [(108000000, 135997500), # Aircraft AM
|
2486
|
(136000000, 180997500), # supports 2m
|
2487
|
(219000000, 250997500),
|
2488
|
(350000000, 399997500),
|
2489
|
(400000000, 512997500), # supports 70cm
|
2490
|
(700000000, 986997500)]
|
2491
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
2492
|
rf.valid_tuning_steps = STEPS
|
2493
|
rf.memory_bounds = (1, 999) # 999 memories
|
2494
|
return rf
|
2495
|
|
2496
|
def callid2str(self, cid):
|
2497
|
"""Caller ID per MDC-1200 spec? Must be 3-6 digits (100 - 999999).
|
2498
|
One digit (binary) per byte, terminated with '0xc'
|
2499
|
"""
|
2500
|
|
2501
|
bin2ascii = " 1234567890"
|
2502
|
cidstr = ""
|
2503
|
for i in range(0, 6):
|
2504
|
b = cid[i].get_value()
|
2505
|
# 9PX factory reset CID use 0x00 for 0 digit - instead of 0x0a
|
2506
|
# remap 0x00 to 0x0a
|
2507
|
if b == 0x00:
|
2508
|
b = 0x0a
|
2509
|
if b == 0xc or b == 0xf0: # the cid EOL
|
2510
|
break
|
2511
|
if b > 0xa:
|
2512
|
raise InvalidValueError(
|
2513
|
"Caller ID code has illegal byte 0x%x" % b)
|
2514
|
cidstr += bin2ascii[b]
|
2515
|
return cidstr
|
2516
|
|
2517
|
def _get_settings(self):
|
2518
|
"""Build the radio configuration settings menus
|
2519
|
"""
|
2520
|
|
2521
|
core_grp = self._core_tab()
|
2522
|
fm_grp = self._fm_tab()
|
2523
|
area_a_grp = self._area_tab("a")
|
2524
|
area_b_grp = self._area_tab("b")
|
2525
|
key_grp = self._key_tab()
|
2526
|
scan_grp = self._scan_grp()
|
2527
|
callid_grp = self._callid_grp()
|
2528
|
admin_grp = self._admin_tab()
|
2529
|
rpt_grp = self._repeater_tab()
|
2530
|
freq_limit_grp = self._fl_tab()
|
2531
|
core_grp.append(key_grp)
|
2532
|
core_grp.append(admin_grp)
|
2533
|
core_grp.append(rpt_grp)
|
2534
|
group = RadioSettings(core_grp,
|
2535
|
area_a_grp,
|
2536
|
area_b_grp,
|
2537
|
fm_grp,
|
2538
|
scan_grp,
|
2539
|
callid_grp,
|
2540
|
freq_limit_grp,)
|
2541
|
return group
|
2542
|
|
2543
|
def _area_tab(self, area):
|
2544
|
"""Build a VFO tab
|
2545
|
"""
|
2546
|
def apply_scan_st(setting, scan_lo, scan_hi, obj):
|
2547
|
f = freq2short(setting.value, scan_lo, scan_hi)
|
2548
|
obj.scan_st = f
|
2549
|
|
2550
|
def apply_scan_end(setting, scan_lo, scan_hi, obj):
|
2551
|
f = freq2short(setting.value, scan_lo, scan_hi)
|
2552
|
obj.scan_end = f
|
2553
|
|
2554
|
if area == "a":
|
2555
|
desc = "Receiver A Settings"
|
2556
|
c = self._memobj.a_conf
|
2557
|
scan_lo = 108000000
|
2558
|
scan_hi = 985997500
|
2559
|
scan_rng = self._memobj.settings.a
|
2560
|
band_list = (150, 200, 300, 450, 700)
|
2561
|
else:
|
2562
|
desc = "Receiver B Settings"
|
2563
|
c = self._memobj.b_conf
|
2564
|
scan_lo = 136000000
|
2565
|
scan_hi = 512997500
|
2566
|
scan_rng = self._memobj.settings.b
|
2567
|
band_list = (150, 450)
|
2568
|
|
2569
|
prefix = "%s_conf" % area
|
2570
|
af = RadioSettingGroup(prefix, desc)
|
2571
|
af.append(
|
2572
|
RadioSetting(prefix + ".w_mode",
|
2573
|
"Workmode",
|
2574
|
RadioSettingValueList(
|
2575
|
WORKMODE_LIST,
|
2576
|
WORKMODE_LIST[c.w_mode])))
|
2577
|
af.append(RadioSetting(prefix + ".w_chan",
|
2578
|
"Channel",
|
2579
|
RadioSettingValueInteger(1, 999,
|
2580
|
c.w_chan)))
|
2581
|
af.append(
|
2582
|
RadioSetting(prefix + ".scan_grp",
|
2583
|
"Scan Group (Menu 49)",
|
2584
|
RadioSettingValueList(
|
2585
|
SCANGRP_LIST,
|
2586
|
SCANGRP_LIST[c.scan_grp])))
|
2587
|
af.append(RadioSetting(prefix + ".bcl",
|
2588
|
"Busy Channel Lock-out (Menu 15)",
|
2589
|
RadioSettingValueBoolean(c.bcl)))
|
2590
|
af.append(
|
2591
|
RadioSetting(prefix + ".sql",
|
2592
|
"Squelch Level (Menu 8)",
|
2593
|
RadioSettingValueList(LIST_0_9,
|
2594
|
LIST_0_9[c.sql])))
|
2595
|
af.append(
|
2596
|
RadioSetting(prefix + ".cset",
|
2597
|
"Call ID Group (Menu 52)",
|
2598
|
RadioSettingValueList(LIST_1_20,
|
2599
|
LIST_1_20[c.cset])))
|
2600
|
af.append(
|
2601
|
RadioSetting(prefix + ".step",
|
2602
|
"Frequency Step (Menu 3)",
|
2603
|
RadioSettingValueList(
|
2604
|
STEP_LIST, STEP_LIST[c.step])))
|
2605
|
af.append(
|
2606
|
RadioSetting(prefix + ".scan_mode",
|
2607
|
"Scan Mode (Menu 20)",
|
2608
|
RadioSettingValueList(
|
2609
|
SCANMODE_LIST,
|
2610
|
SCANMODE_LIST[c.scan_mode])))
|
2611
|
af.append(
|
2612
|
RadioSetting(prefix + ".scan_range",
|
2613
|
"Scan Range (Menu 50)",
|
2614
|
RadioSettingValueList(
|
2615
|
SCANRANGE_LIST,
|
2616
|
SCANRANGE_LIST[c.scan_range])))
|
2617
|
st = RadioSettingValueString(0, 15,
|
2618
|
short2freq(scan_rng.scan_st))
|
2619
|
rs = RadioSetting("settings.%s.scan_st" % area,
|
2620
|
"Frequency Scan Start", st)
|
2621
|
rs.set_apply_callback(apply_scan_st, scan_lo, scan_hi, scan_rng)
|
2622
|
af.append(rs)
|
2623
|
|
2624
|
end = RadioSettingValueString(0, 15,
|
2625
|
short2freq(scan_rng.scan_end))
|
2626
|
rs = RadioSetting("settings.%s.scan_end" % area,
|
2627
|
"Frequency Scan End", end)
|
2628
|
rs.set_apply_callback(apply_scan_end, scan_lo, scan_hi,
|
2629
|
scan_rng)
|
2630
|
af.append(rs)
|
2631
|
# Each area has its own set of bands
|
2632
|
for band in (band_list):
|
2633
|
af.append(self._band_tab(area, band))
|
2634
|
return af
|
2635
|
|
2636
|
def _band_tab(self, area, band):
|
2637
|
""" Build a band tab inside a VFO/Area
|
2638
|
"""
|
2639
|
def apply_freq(setting, lo, hi, obj):
|
2640
|
f = freq2int(setting.value, lo, hi)
|
2641
|
obj.freq = f/10
|
2642
|
|
2643
|
def apply_offset(setting, obj):
|
2644
|
f = freq2int(setting.value, 0, 5000000)
|
2645
|
obj.offset = f/10
|
2646
|
|
2647
|
def apply_enc(setting, obj):
|
2648
|
t = tone2short(setting.value)
|
2649
|
obj.encqt = t
|
2650
|
|
2651
|
def apply_dec(setting, obj):
|
2652
|
t = tone2short(setting.value)
|
2653
|
obj.decqt = t
|
2654
|
|
2655
|
if area == "a":
|
2656
|
if band == 150:
|
2657
|
c = self._memobj.vfo_a.band_150
|
2658
|
lo = 108000000
|
2659
|
hi = 180997500
|
2660
|
elif band == 200:
|
2661
|
c = self._memobj.vfo_a.band_200
|
2662
|
lo = 219000000
|
2663
|
hi = 250997500
|
2664
|
elif band == 300:
|
2665
|
c = self._memobj.vfo_a.band_300
|
2666
|
lo = 350000000
|
2667
|
hi = 399997500
|
2668
|
elif band == 450:
|
2669
|
c = self._memobj.vfo_a.band_450
|
2670
|
lo = 400000000
|
2671
|
hi = 512997500
|
2672
|
else: # 700
|
2673
|
c = self._memobj.vfo_a.band_700
|
2674
|
lo = 700000000
|
2675
|
hi = 986997500
|
2676
|
else: # area 'b'
|
2677
|
if band == 150:
|
2678
|
c = self._memobj.vfo_b.band_150
|
2679
|
lo = 136000000
|
2680
|
hi = 180997500
|
2681
|
else: # 450
|
2682
|
c = self._memobj.vfo_b.band_450
|
2683
|
lo = 400000000
|
2684
|
hi = 512997500
|
2685
|
|
2686
|
prefix = "vfo_%s.band_%d" % (area, band)
|
2687
|
bf = RadioSettingGroup(prefix, "%dMHz Band" % band)
|
2688
|
freq = RadioSettingValueString(0, 15, int2freq(c.freq * 10))
|
2689
|
rs = RadioSetting(prefix + ".freq", "Rx Frequency", freq)
|
2690
|
rs.set_apply_callback(apply_freq, lo, hi, c)
|
2691
|
bf.append(rs)
|
2692
|
|
2693
|
off = RadioSettingValueString(0, 15, int2freq(c.offset * 10))
|
2694
|
rs = RadioSetting(prefix + ".offset", "Tx Offset (Menu 28)", off)
|
2695
|
rs.set_apply_callback(apply_offset, c)
|
2696
|
bf.append(rs)
|
2697
|
|
2698
|
rs = RadioSetting(prefix + ".encqt",
|
2699
|
"Encode QT (Menu 17,19)",
|
2700
|
RadioSettingValueList(TONE_LIST,
|
2701
|
short2tone(c.encqt)))
|
2702
|
rs.set_apply_callback(apply_enc, c)
|
2703
|
bf.append(rs)
|
2704
|
|
2705
|
rs = RadioSetting(prefix + ".decqt",
|
2706
|
"Decode QT (Menu 16,18)",
|
2707
|
RadioSettingValueList(TONE_LIST,
|
2708
|
short2tone(c.decqt)))
|
2709
|
rs.set_apply_callback(apply_dec, c)
|
2710
|
bf.append(rs)
|
2711
|
|
2712
|
bf.append(RadioSetting(prefix + ".qt",
|
2713
|
"Mute Mode (Menu 21)",
|
2714
|
RadioSettingValueList(SPMUTE_LIST,
|
2715
|
SPMUTE_LIST[c.qt])))
|
2716
|
bf.append(RadioSetting(prefix + ".scan",
|
2717
|
"Scan this (Menu 48)",
|
2718
|
RadioSettingValueBoolean(c.scan)))
|
2719
|
bf.append(RadioSetting(prefix + ".pwr",
|
2720
|
"Power (Menu 5)",
|
2721
|
RadioSettingValueList(
|
2722
|
POWER_LIST, POWER_LIST[c.pwr])))
|
2723
|
bf.append(RadioSetting(prefix + ".mod",
|
2724
|
"AM Modulation (Menu 54)",
|
2725
|
RadioSettingValueBoolean(c.mod)))
|
2726
|
bf.append(RadioSetting(prefix + ".fm_dev",
|
2727
|
"FM Deviation (Menu 4)",
|
2728
|
RadioSettingValueList(
|
2729
|
BANDWIDTH_LIST,
|
2730
|
BANDWIDTH_LIST[c.fm_dev])))
|
2731
|
bf.append(
|
2732
|
RadioSetting(prefix + ".shift",
|
2733
|
"Frequency Shift (Menu 6)",
|
2734
|
RadioSettingValueList(OFFSET_LIST,
|
2735
|
OFFSET_LIST[c.shift])))
|
2736
|
return bf
|
2737
|
|
2738
|
def _fl_tab(self):
|
2739
|
|
2740
|
freq_limit_grp = RadioSettingGroup("limits",
|
2741
|
"Freq Limits")
|
2742
|
limgrp = freq_limit_grp
|
2743
|
|
2744
|
l = self._memobj.limits
|
2745
|
|
2746
|
if self.MODEL == "KG-UV9PX":
|
2747
|
val = RadioSettingValueInteger(136, 180,
|
2748
|
(l.lim_150M_Txlower_limit) / 10.0)
|
2749
|
rs = RadioSetting("limits.lim_150M_Txlower_limit",
|
2750
|
"150M Tx Lower Limit (MHz)",
|
2751
|
RadioSettingValueInteger(136, 180, val))
|
2752
|
limgrp.append(rs)
|
2753
|
|
2754
|
val = RadioSettingValueInteger(136, 180,
|
2755
|
(l.lim_150M_Txupper_limit) / 10.0)
|
2756
|
rs = RadioSetting("limits.lim_150M_Txupper_limit",
|
2757
|
"150M Tx Upper Limit (MHz + 0.9975)",
|
2758
|
RadioSettingValueInteger(136, 180, val))
|
2759
|
limgrp.append(rs)
|
2760
|
|
2761
|
val = RadioSettingValueInteger(400, 512,
|
2762
|
(l.lim_450M_Txlower_limit) / 10.0)
|
2763
|
rs = RadioSetting("limits.lim_450M_Txlower_limit",
|
2764
|
"450M Tx Lower Limit (MHz)",
|
2765
|
RadioSettingValueInteger(400, 512, val))
|
2766
|
limgrp.append(rs)
|
2767
|
|
2768
|
val = RadioSettingValueInteger(400, 512,
|
2769
|
(l.lim_450M_Txupper_limit) / 10.0)
|
2770
|
rs = RadioSetting("limits.lim_450M_Txupper_limit",
|
2771
|
"450M Tx Upper Limit (MHz + 0.9975)",
|
2772
|
RadioSettingValueInteger(400, 512, val))
|
2773
|
limgrp.append(rs)
|
2774
|
|
2775
|
val = RadioSettingValueInteger(108, 180,
|
2776
|
(l.lim_150M_area_a_rxlower_limit) /
|
2777
|
10.0)
|
2778
|
rs = RadioSetting("limits.lim_150M_area_a_rxlower_limit",
|
2779
|
"Rcvr A 150M Rx Lower Limit (MHz)",
|
2780
|
RadioSettingValueInteger(108, 180,
|
2781
|
val))
|
2782
|
limgrp.append(rs)
|
2783
|
|
2784
|
val = RadioSettingValueInteger(108, 180,
|
2785
|
(l.lim_150M_area_a_rxupper_limit) /
|
2786
|
10.0)
|
2787
|
rs = RadioSetting("limits.lim_150M_area_a_rxupper_limit",
|
2788
|
"Rcvr A 150M Rx Upper Limit (MHz + 0.9975)",
|
2789
|
RadioSettingValueInteger(108, 180,
|
2790
|
val))
|
2791
|
limgrp.append(rs)
|
2792
|
|
2793
|
val = RadioSettingValueInteger(136, 180,
|
2794
|
(l.lim_150M_area_b_rxlower_limit) /
|
2795
|
10.0)
|
2796
|
rs = RadioSetting("limits.lim_150M_area_b_rxlower_limit",
|
2797
|
"Rcvr B 150M Rx Lower Limit (MHz)",
|
2798
|
RadioSettingValueInteger(136, 180,
|
2799
|
val))
|
2800
|
limgrp.append(rs)
|
2801
|
|
2802
|
val = RadioSettingValueInteger(136, 180,
|
2803
|
(l.lim_150M_area_b_rxupper_limit) /
|
2804
|
10.0)
|
2805
|
rs = RadioSetting("limits.lim_150M_area_b_rxupper_limit",
|
2806
|
"Rcvr B 150M Rx Upper Limit (MHz + 0.9975)",
|
2807
|
RadioSettingValueInteger(136, 180,
|
2808
|
val))
|
2809
|
limgrp.append(rs)
|
2810
|
|
2811
|
val = RadioSettingValueInteger(400, 512,
|
2812
|
(l.lim_450M_rxlower_limit) / 10.0)
|
2813
|
rs = RadioSetting("limits.lim_450M_rxlower_limit",
|
2814
|
"450M Rx Lower Limit (MHz)",
|
2815
|
RadioSettingValueInteger(400, 512,
|
2816
|
val))
|
2817
|
limgrp.append(rs)
|
2818
|
|
2819
|
val = RadioSettingValueInteger(400, 512,
|
2820
|
(l.lim_450M_rxupper_limit) / 10.0)
|
2821
|
rs = RadioSetting("limits.lim_450M_rxupper_limit",
|
2822
|
"450M Rx Upper Limit (MHz + 0.9975)",
|
2823
|
RadioSettingValueInteger(400, 512,
|
2824
|
val))
|
2825
|
limgrp.append(rs)
|
2826
|
|
2827
|
val = RadioSettingValueInteger(350, 399,
|
2828
|
(l.lim_300M_rxlower_limit) / 10.0)
|
2829
|
rs = RadioSetting("limits.lim_300M_rxlower_limit",
|
2830
|
"300M Rx Lower Limit (MHz)",
|
2831
|
RadioSettingValueInteger(350, 399,
|
2832
|
val))
|
2833
|
limgrp.append(rs)
|
2834
|
|
2835
|
val = RadioSettingValueInteger(350, 399,
|
2836
|
(l.lim_300M_rxupper_limit) / 10.0)
|
2837
|
rs = RadioSetting("limits.lim_300M_rxupper_limit",
|
2838
|
"300M Rx Upper Limit (MHz + 0.9975)",
|
2839
|
RadioSettingValueInteger(350, 399,
|
2840
|
val))
|
2841
|
limgrp.append(rs)
|
2842
|
val = RadioSettingValueInteger(700, 986,
|
2843
|
(l.lim_800M_rxlower_limit) / 10.0)
|
2844
|
rs = RadioSetting("limits.lim_800M_rxlower_limit",
|
2845
|
"800M Rx Lower Limit (MHz)",
|
2846
|
RadioSettingValueInteger(700, 986,
|
2847
|
val))
|
2848
|
limgrp.append(rs)
|
2849
|
|
2850
|
val = RadioSettingValueInteger(700, 986,
|
2851
|
(l.lim_800M_rxupper_limit) / 10.0)
|
2852
|
rs = RadioSetting("limits.lim_800M_rxupper_limit",
|
2853
|
"800M Rx Upper Limit (MHz + 0.9975)",
|
2854
|
RadioSettingValueInteger(700, 986,
|
2855
|
val))
|
2856
|
limgrp.append(rs)
|
2857
|
|
2858
|
val = RadioSettingValueInteger(219, 250,
|
2859
|
(l.lim_210M_rxlower_limit) / 10.0)
|
2860
|
rs = RadioSetting("limits.lim_210M_rxlower_limit",
|
2861
|
"210M Rx Lower Limit (MHz)",
|
2862
|
RadioSettingValueInteger(219, 250,
|
2863
|
val))
|
2864
|
limgrp.append(rs)
|
2865
|
|
2866
|
val = RadioSettingValueInteger(219, 250,
|
2867
|
(l.lim_210M_rxupper_limit) / 10.0)
|
2868
|
rs = RadioSetting("limits.lim_210M_rxupper_limit",
|
2869
|
"210M Rx Upper Limit (MHz + 0.9975)",
|
2870
|
RadioSettingValueInteger(219, 250,
|
2871
|
val))
|
2872
|
limgrp.append(rs)
|
2873
|
|
2874
|
return limgrp
|
2875
|
|
2876
|
|
2877
|
@directory.register
|
2878
|
class KGUV9GXRadio(KGUV9PXRadio):
|
2879
|
|
2880
|
"""Wouxun KG-UV9GX"""
|
2881
|
VENDOR = "Wouxun"
|
2882
|
MODEL = "KG-UV9GX"
|
2883
|
_model = b"KG-UV9D"
|
2884
|
_rev = b"02" # default rev for the radio I know about...
|
2885
|
NEEDS_COMPAT_SERIAL = False
|
2886
|
|
2887
|
@directory.register
|
2888
|
class KGUV9KRadio(KGUV9DPlusRadio):
|
2889
|
|
2890
|
"""Wouxun KG-UV9K"""
|
2891
|
VENDOR = "Wouxun"
|
2892
|
MODEL = "KG-UV9K"
|
2893
|
_model = b"KG-UV9D"
|
2894
|
_rev = b"02" # default rev for the radio I know about...
|
2895
|
NEEDS_COMPAT_SERIAL = False
|
2896
|
|
2897
|
def callid2str(self, cid):
|
2898
|
"""Caller ID per MDC-1200 spec? Must be 3-6 digits (100 - 999999).
|
2899
|
One digit (binary) per byte, terminated with '0xc'
|
2900
|
"""
|
2901
|
|
2902
|
bin2ascii = " 1234567890"
|
2903
|
cidstr = ""
|
2904
|
for i in range(0, 6):
|
2905
|
b = cid[i].get_value()
|
2906
|
# 9PX factory reset CID use 0x00 for 0 digit - instead of 0x0a
|
2907
|
# remap 0x00 to 0x0a
|
2908
|
if b == 0x00:
|
2909
|
b = 0x0a
|
2910
|
if b == 0xc or b == 0xf0: # the cid EOL
|
2911
|
break
|
2912
|
if b > 0xa:
|
2913
|
raise InvalidValueError(
|
2914
|
"Caller ID code has illegal byte 0x%x" % b)
|
2915
|
cidstr += bin2ascii[b]
|
2916
|
return cidstr
|
2917
|
|
2918
|
def get_features(self):
|
2919
|
""" Public get_features
|
2920
|
Return the features of this radio once we have identified
|
2921
|
it and gotten its bits
|
2922
|
"""
|
2923
|
rf = chirp_common.RadioFeatures()
|
2924
|
rf.has_settings = True
|
2925
|
rf.has_ctone = True
|
2926
|
rf.has_rx_dtcs = True
|
2927
|
rf.has_cross = True
|
2928
|
rf.has_tuning_step = False
|
2929
|
rf.has_bank = False
|
2930
|
rf.can_odd_split = True
|
2931
|
rf.valid_skips = ["", "S"]
|
2932
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
2933
|
rf.valid_cross_modes = [
|
2934
|
"Tone->Tone",
|
2935
|
"Tone->DTCS",
|
2936
|
"DTCS->Tone",
|
2937
|
"DTCS->",
|
2938
|
"->Tone",
|
2939
|
"->DTCS",
|
2940
|
"DTCS->DTCS",
|
2941
|
]
|
2942
|
rf.valid_modes = ["FM", "NFM", "AM"]
|
2943
|
rf.valid_power_levels = self.POWER_LEVELS
|
2944
|
rf.valid_name_length = 8
|
2945
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
2946
|
rf.valid_bands = [(108000000, 136000000), # Aircraft AM
|
2947
|
(136000000, 180000000), # supports 2m
|
2948
|
(230000000, 250000000),
|
2949
|
(350000000, 400000000),
|
2950
|
(400000000, 520000000), # supports 70cm
|
2951
|
(700000000, 985000000)]
|
2952
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
2953
|
rf.valid_tuning_steps = STEPS_9K
|
2954
|
rf.memory_bounds = (1, 999) # 999 memories
|
2955
|
return rf
|
2956
|
|
2957
|
def _area_tab(self, area):
|
2958
|
"""Build a VFO tab
|
2959
|
"""
|
2960
|
def apply_scan_st(setting, scan_lo, scan_hi, obj):
|
2961
|
f = freq2short(setting.value, scan_lo, scan_hi)
|
2962
|
obj.scan_st = f
|
2963
|
|
2964
|
def apply_scan_end(setting, scan_lo, scan_hi, obj):
|
2965
|
f = freq2short(setting.value, scan_lo, scan_hi)
|
2966
|
obj.scan_end = f
|
2967
|
|
2968
|
if area == "a":
|
2969
|
desc = "Area A Settings"
|
2970
|
c = self._memobj.a_conf
|
2971
|
scan_lo = 108000000
|
2972
|
scan_hi = 985000000
|
2973
|
scan_rng = self._memobj.settings.a
|
2974
|
band_list = (150, 200, 300, 450, 700)
|
2975
|
else:
|
2976
|
desc = "Area B Settings"
|
2977
|
c = self._memobj.b_conf
|
2978
|
scan_lo = 136000000
|
2979
|
scan_hi = 512000000
|
2980
|
scan_rng = self._memobj.settings.b
|
2981
|
band_list = (150, 450)
|
2982
|
|
2983
|
prefix = "%s_conf" % area
|
2984
|
af = RadioSettingGroup(prefix, desc)
|
2985
|
af.append(
|
2986
|
RadioSetting(prefix + ".w_mode",
|
2987
|
"Workmode",
|
2988
|
RadioSettingValueList(
|
2989
|
WORKMODE_LIST,
|
2990
|
WORKMODE_LIST[c.w_mode])))
|
2991
|
af.append(RadioSetting(prefix + ".w_chan",
|
2992
|
"Channel",
|
2993
|
RadioSettingValueInteger(1, 999,
|
2994
|
c.w_chan)))
|
2995
|
af.append(
|
2996
|
RadioSetting(prefix + ".scan_grp",
|
2997
|
"Scan Group (Menu 49)",
|
2998
|
RadioSettingValueList(
|
2999
|
SCANGRP_LIST,
|
3000
|
SCANGRP_LIST[c.scan_grp])))
|
3001
|
af.append(RadioSetting(prefix + ".bcl",
|
3002
|
"Busy Channel Lock-out (Menu 15)",
|
3003
|
RadioSettingValueBoolean(c.bcl)))
|
3004
|
af.append(
|
3005
|
RadioSetting(prefix + ".sql",
|
3006
|
"Squelch Level (Menu 8)",
|
3007
|
RadioSettingValueList(LIST_0_9,
|
3008
|
LIST_0_9[c.sql])))
|
3009
|
af.append(
|
3010
|
RadioSetting(prefix + ".cset",
|
3011
|
"Call ID Group (Menu 52)",
|
3012
|
RadioSettingValueList(LIST_1_20,
|
3013
|
LIST_1_20[c.cset])))
|
3014
|
af.append(
|
3015
|
RadioSetting(prefix + ".step",
|
3016
|
"Frequency Step (Menu 3)",
|
3017
|
RadioSettingValueList(
|
3018
|
STEP_LIST_9K, STEP_LIST_9K[c.step])))
|
3019
|
af.append(
|
3020
|
RadioSetting(prefix + ".scan_mode",
|
3021
|
"Scan Mode (Menu 20)",
|
3022
|
RadioSettingValueList(
|
3023
|
SCANMODE_LIST,
|
3024
|
SCANMODE_LIST[c.scan_mode])))
|
3025
|
af.append(
|
3026
|
RadioSetting(prefix + ".scan_range",
|
3027
|
"Scan Range (Menu 50)",
|
3028
|
RadioSettingValueList(
|
3029
|
SCANRANGE_LIST,
|
3030
|
SCANRANGE_LIST[c.scan_range])))
|
3031
|
st = RadioSettingValueString(0, 15,
|
3032
|
short2freq(scan_rng.scan_st))
|
3033
|
rs = RadioSetting("settings.%s.scan_st" % area,
|
3034
|
"Frequency Scan Start", st)
|
3035
|
rs.set_apply_callback(apply_scan_st, scan_lo, scan_hi, scan_rng)
|
3036
|
af.append(rs)
|
3037
|
|
3038
|
end = RadioSettingValueString(0, 15,
|
3039
|
short2freq(scan_rng.scan_end))
|
3040
|
rs = RadioSetting("settings.%s.scan_end" % area,
|
3041
|
"Frequency Scan End", end)
|
3042
|
rs.set_apply_callback(apply_scan_end, scan_lo, scan_hi,
|
3043
|
scan_rng)
|
3044
|
af.append(rs)
|
3045
|
# Each area has its own set of bands
|
3046
|
for band in (band_list):
|
3047
|
af.append(self._band_tab(area, band))
|
3048
|
return af
|