|
# Copyright 2013 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import struct
|
|
from chirp import chirp_common, directory, bitwise, memmap, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettingValueFloat
|
|
from textwrap import dedent
|
|
|
|
mem_format = """
|
|
struct memory {
|
|
lbcd freq[4];
|
|
lbcd offset[4];
|
|
u8 unknown1:2,
|
|
txpol:1,
|
|
rxpol:1,
|
|
compander:1,
|
|
unknown2:3;
|
|
u8 rxtone;
|
|
u8 txtone;
|
|
u8 pttid:1,
|
|
scanadd:1,
|
|
isnarrow:1,
|
|
bcl:1,
|
|
highpower:1,
|
|
revfreq:1,
|
|
duplex:2;
|
|
u8 step;
|
|
u8 unknown[3];
|
|
};
|
|
|
|
#seekto 0x0000;
|
|
char ident[32];
|
|
u8 blank[16];
|
|
struct memory vfo1;
|
|
struct memory channels[99];
|
|
#seekto 0x0850;
|
|
struct memory vfo2;
|
|
|
|
#seekto 0x09D0;
|
|
u16 fm_presets[16];
|
|
|
|
#seekto 0x0A30;
|
|
struct {
|
|
u8 name[5];
|
|
} names[99];
|
|
|
|
#seekto 0x0D30;
|
|
struct {
|
|
u8 squelch;
|
|
u8 freqmode_ab:1,
|
|
save_funct:1,
|
|
backlight:1,
|
|
beep_tone:1,
|
|
roger:1,
|
|
tdr:1,
|
|
scantype:2;
|
|
u8 language:1,
|
|
workmode_b:1,
|
|
workmode_a:1,
|
|
workmode_fm:1,
|
|
voice_prompt:1,
|
|
fm:1,
|
|
pttid:2;
|
|
u8 timeout;
|
|
u8 mdf_b:2,
|
|
mdf_a:2,
|
|
unknown_1:2,
|
|
txtdr:2;
|
|
u8 sidetone;
|
|
u8 vox;
|
|
} settings;
|
|
|
|
#seekto 0x0D50;
|
|
struct {
|
|
u8 code[6];
|
|
} pttid;
|
|
|
|
#seekto 0x0F30;
|
|
struct {
|
|
lbcd lower_vhf[2];
|
|
lbcd upper_vhf[2];
|
|
lbcd lower_uhf[2];
|
|
lbcd upper_uhf[2];
|
|
} limits;
|
|
|
|
#seekto 0x0FF0;
|
|
struct {
|
|
u8 vhfsquelch0;
|
|
u8 vhfsquelch1;
|
|
u8 vhfsquelch2;
|
|
u8 vhfsquelch3;
|
|
u8 vhfsquelch4;
|
|
u8 vhfsquelch5;
|
|
u8 vhfsquelch6;
|
|
u8 vhfsquelch7;
|
|
u8 vhfsquelch8;
|
|
u8 vhfsquelch9;
|
|
u8 unknown1[6];
|
|
u8 uhfsquelch0;
|
|
u8 uhfsquelch1;
|
|
u8 uhfsquelch2;
|
|
u8 uhfsquelch3;
|
|
u8 uhfsquelch4;
|
|
u8 uhfsquelch5;
|
|
u8 uhfsquelch6;
|
|
u8 uhfsquelch7;
|
|
u8 uhfsquelch8;
|
|
u8 uhfsquelch9;
|
|
u8 unknown2[6];
|
|
u8 vhfhipwr0;
|
|
u8 vhfhipwr1;
|
|
u8 vhfhipwr2;
|
|
u8 vhfhipwr3;
|
|
u8 vhfhipwr4;
|
|
u8 vhfhipwr5;
|
|
u8 vhfhipwr6;
|
|
u8 vhfhipwr7;
|
|
u8 vhflopwr0;
|
|
u8 vhflopwr1;
|
|
u8 vhflopwr2;
|
|
u8 vhflopwr3;
|
|
u8 vhflopwr4;
|
|
u8 vhflopwr5;
|
|
u8 vhflopwr6;
|
|
u8 vhflopwr7;
|
|
u8 uhfhipwr0;
|
|
u8 uhfhipwr1;
|
|
u8 uhfhipwr2;
|
|
u8 uhfhipwr3;
|
|
u8 uhfhipwr4;
|
|
u8 uhfhipwr5;
|
|
u8 uhfhipwr6;
|
|
u8 uhfhipwr7;
|
|
u8 uhflopwr0;
|
|
u8 uhflopwr1;
|
|
u8 uhflopwr2;
|
|
u8 uhflopwr3;
|
|
u8 uhflopwr4;
|
|
u8 uhflopwr5;
|
|
u8 uhflopwr6;
|
|
u8 uhflopwr7;
|
|
} test;
|
|
"""
|
|
|
|
def do_ident(radio):
|
|
radio.pipe.setTimeout(3)
|
|
radio.pipe.write("PROGRAM")
|
|
ack = radio.pipe.read(1)
|
|
if ack != '\x06':
|
|
raise errors.RadioError("Radio did not ack programming mode")
|
|
radio.pipe.write("\x02")
|
|
ident = radio.pipe.read(8)
|
|
print util.hexprint(ident)
|
|
if not ident.startswith('HKT511'):
|
|
raise errors.RadioError("Unsupported model")
|
|
radio.pipe.write("\x06")
|
|
ack = radio.pipe.read(1)
|
|
if ack != "\x06":
|
|
raise errors.RadioError("Radio did not ack ident")
|
|
|
|
def do_status(radio, direction, addr):
|
|
status = chirp_common.Status()
|
|
status.msg = "Cloning %s radio" % direction
|
|
status.cur = addr
|
|
status.max = 0x1000
|
|
radio.status_fn(status)
|
|
|
|
def do_download(radio):
|
|
do_ident(radio)
|
|
data = "KT511 Radio Program data v1.08\x00\x00"
|
|
data += ("\x00" * 16)
|
|
firstack = None
|
|
for i in range(0, 0x1000, 16):
|
|
frame = struct.pack(">cHB", "R", i, 16)
|
|
radio.pipe.write(frame)
|
|
result = radio.pipe.read(20)
|
|
if frame[1:4] != result[1:4]:
|
|
print util.hexprint(result)
|
|
raise errors.RadioError("Invalid response for address 0x%04x" % i)
|
|
radio.pipe.write("\x06")
|
|
ack = radio.pipe.read(1)
|
|
if not firstack:
|
|
firstack = ack
|
|
else:
|
|
if not ack == firstack:
|
|
print "first ack:", util.hexprint(firstack), \
|
|
"ack received:", util.hexprint(ack)
|
|
raise errors.RadioError("Unexpected response")
|
|
data += result[4:]
|
|
do_status(radio, "from", i)
|
|
|
|
return memmap.MemoryMap(data)
|
|
|
|
def do_upload(radio):
|
|
do_ident(radio)
|
|
data = radio._mmap[0x0030:]
|
|
|
|
for i in range(0, 0x1000, 16):
|
|
frame = struct.pack(">cHB", "W", i, 16)
|
|
frame += data[i:i + 16]
|
|
radio.pipe.write(frame)
|
|
ack = radio.pipe.read(1)
|
|
if ack != "\x06":
|
|
raise errors.RadioError("Radio NAK'd block at address 0x%04x" % i)
|
|
do_status(radio, "to", i)
|
|
|
|
DUPLEX = ["", "-", "+", 'off', "split"]
|
|
UVB5_STEPS = [5.00, 6.25, 10.0, 12.5, 20.0, 25.0]
|
|
CHARSET = "0123456789- ABCDEFGHIJKLMNOPQRSTUVWXYZ/_+*"
|
|
SPECIALS = {
|
|
"VFO1": -2,
|
|
"VFO2": -1,
|
|
}
|
|
POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1),
|
|
chirp_common.PowerLevel("High", watts=5)]
|
|
|
|
@directory.register
|
|
class BaofengUVB5(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
"""Baofeng UV-B5"""
|
|
VENDOR = "Baofeng"
|
|
MODEL = "UV-B5"
|
|
BAUD_RATE = 9600
|
|
|
|
_memsize = 0x1000
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = ('This version of the UV-B5 driver allows you to '
|
|
'modify the Test Mode settings of your radio. This has been '
|
|
'tested and reports from other users indicate that it is a '
|
|
'safe thing to do. However, modifications to these values may '
|
|
'have unintended consequences, including damage to your '
|
|
'device. You have been warned. Proceed at your own risk!')
|
|
rp.pre_download = _(dedent("""\
|
|
1. Turn radio off.
|
|
2. Connect cable to mic/spkr connector.
|
|
3. Make sure connector is firmly connected.
|
|
4. Turn radio on.
|
|
5. Ensure that the radio is tuned to channel with no activity.
|
|
6. Click OK to download image from device."""))
|
|
rp.pre_upload = _(dedent("""\
|
|
1. Turn radio off.
|
|
2. Connect cable to mic/spkr connector.
|
|
3. Make sure connector is firmly connected.
|
|
4. Turn radio on.
|
|
5. Ensure that the radio is tuned to channel with no activity.
|
|
6. Click OK to upload image to device."""))
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_cross = True
|
|
rf.has_rx_dtcs = True
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
rf.valid_duplexes = DUPLEX
|
|
rf.can_odd_split = True
|
|
rf.valid_skips = ["", "S"]
|
|
rf.valid_characters = CHARSET
|
|
rf.valid_name_length = 5
|
|
rf.valid_bands = [(136000000, 174000000),
|
|
(400000000, 520000000)]
|
|
rf.valid_modes = ["FM", "NFM"]
|
|
rf.valid_special_chans = SPECIALS.keys()
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
rf.has_ctone = True
|
|
rf.has_bank = False
|
|
rf.has_tuning_step = True
|
|
rf.valid_tuning_steps = UVB5_STEPS
|
|
rf.memory_bounds = (1, 99)
|
|
return rf
|
|
|
|
def sync_in(self):
|
|
try:
|
|
self._mmap = do_download(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
try:
|
|
do_upload(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(mem_format, self._mmap)
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.channels[number - 1])
|
|
|
|
def _decode_tone(self, value, flag):
|
|
if value > 50:
|
|
mode = 'DTCS'
|
|
val = chirp_common.DTCS_CODES[value - 51]
|
|
pol = flag and 'R' or 'N'
|
|
elif value:
|
|
mode = 'Tone'
|
|
val = chirp_common.TONES[value - 1]
|
|
pol = None
|
|
else:
|
|
mode = val = pol = None
|
|
|
|
return mode, val, pol
|
|
|
|
def _encode_tone(self, _mem, which, mode, val, pol):
|
|
def _set(field, value):
|
|
setattr(_mem, "%s%s" % (which, field), value)
|
|
|
|
_set("pol", 0)
|
|
if mode == "Tone":
|
|
_set("tone", chirp_common.TONES.index(val) + 1)
|
|
elif mode == "DTCS":
|
|
_set("tone", chirp_common.DTCS_CODES.index(val) + 51)
|
|
_set("pol", pol == "R")
|
|
else:
|
|
_set("tone", 0)
|
|
|
|
def _get_memobjs(self, number):
|
|
if isinstance(number, str):
|
|
return (getattr(self._memobj, number.lower()), None)
|
|
elif number < 0:
|
|
for k, v in SPECIALS.items():
|
|
if number == v:
|
|
return (getattr(self._memobj, k.lower()), None)
|
|
else:
|
|
return (self._memobj.channels[number - 1],
|
|
self._memobj.names[number - 1].name)
|
|
|
|
def get_memory(self, number):
|
|
_mem, _nam = self._get_memobjs(number)
|
|
mem = chirp_common.Memory()
|
|
if isinstance(number, str):
|
|
mem.number = SPECIALS[number]
|
|
mem.extd_number = number
|
|
else:
|
|
mem.number = number
|
|
|
|
if _mem.freq.get_raw()[0] == "\xFF":
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.freq) * 10
|
|
mem.offset = int(_mem.offset) * 10
|
|
|
|
chirp_common.split_tone_decode(
|
|
mem,
|
|
self._decode_tone(_mem.txtone, _mem.txpol),
|
|
self._decode_tone(_mem.rxtone, _mem.rxpol))
|
|
|
|
if _mem.step < 0x06:
|
|
mem.tuning_step = UVB5_STEPS[_mem.step]
|
|
else:
|
|
_mem.step = 0x00
|
|
mem.tuning_step = UVB5_STEPS[0]
|
|
mem.duplex = DUPLEX[_mem.duplex]
|
|
mem.mode = _mem.isnarrow and "NFM" or "FM"
|
|
mem.skip = "" if _mem.scanadd else "S"
|
|
mem.power = POWER_LEVELS[_mem.highpower]
|
|
|
|
if mem.freq == mem.offset and mem.duplex == "-":
|
|
mem.duplex = "off"
|
|
mem.offset = 0
|
|
|
|
if _nam:
|
|
for char in _nam:
|
|
try:
|
|
mem.name += CHARSET[char]
|
|
except IndexError:
|
|
break
|
|
mem.name = mem.name.rstrip()
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSetting("bcl", "BCL",
|
|
RadioSettingValueBoolean(_mem.bcl))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("revfreq", "Reverse Duplex",
|
|
RadioSettingValueBoolean(_mem.revfreq))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("pttid", "PTT ID",
|
|
RadioSettingValueBoolean(_mem.pttid))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("compander", "Compander",
|
|
RadioSettingValueBoolean(_mem.compander))
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
_mem, _nam = self._get_memobjs(mem.number)
|
|
|
|
if mem.empty:
|
|
if _nam is None:
|
|
raise errors.InvalidValueError("VFO channels can not be empty")
|
|
_mem.set_raw("\xFF" * 16)
|
|
return
|
|
|
|
if _mem.get_raw() == ("\xFF" * 16):
|
|
_mem.set_raw("\x00" * 13 + "\xFF" * 3)
|
|
|
|
_mem.freq = mem.freq / 10
|
|
|
|
if mem.duplex == "off":
|
|
_mem.duplex = DUPLEX.index("-")
|
|
_mem.offset = _mem.freq
|
|
elif mem.duplex == "split":
|
|
diff = mem.offset - mem.freq
|
|
_mem.duplex = DUPLEX.index("-") if diff < 0 else DUPLEX.index("+")
|
|
_mem.offset = abs(diff) / 10
|
|
else:
|
|
_mem.offset = mem.offset / 10
|
|
_mem.duplex = DUPLEX.index(mem.duplex)
|
|
|
|
tx, rx = chirp_common.split_tone_encode(mem)
|
|
self._encode_tone(_mem, 'tx', *tx)
|
|
self._encode_tone(_mem, 'rx', *rx)
|
|
|
|
_mem.step = UVB5_STEPS.index(mem.tuning_step)
|
|
_mem.isnarrow = mem.mode == "NFM"
|
|
_mem.scanadd = mem.skip == ""
|
|
_mem.highpower = mem.power == POWER_LEVELS[1]
|
|
|
|
if _nam:
|
|
for i in range(0, 5):
|
|
try:
|
|
_nam[i] = CHARSET.index(mem.name[i])
|
|
except IndexError:
|
|
_nam[i] = 0xFF
|
|
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def validate_memory(self, mem):
|
|
msgs = chirp_common.CloneModeRadio.validate_memory(self, mem)
|
|
|
|
if (mem.duplex == "split" and abs(mem.freq - mem.offset) > 69995000) or \
|
|
(mem.duplex in ["+", "-"] and mem.offset > 69995000) :
|
|
msgs.append(chirp_common.ValidationError(
|
|
"Max split is 69.995MHz"))
|
|
return msgs
|
|
|
|
|
|
def get_settings(self):
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
group = RadioSettingGroup("top", "All Settings", basic)
|
|
|
|
options = ["Time", "Carrier", "Search"]
|
|
rs = RadioSetting("scantype", "Scan Type",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.scantype]))
|
|
basic.append(rs)
|
|
|
|
options = ["%s min" % x for x in range(1, 8)]
|
|
options.insert(0, "Off")
|
|
rs = RadioSetting("timeout", "Time Out Timer",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.timeout]))
|
|
basic.append(rs)
|
|
|
|
options = ["A", "B"]
|
|
rs = RadioSetting("freqmode_ab", "Frequency Mode",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.freqmode_ab]))
|
|
basic.append(rs)
|
|
|
|
options = ["Frequency Mode", "Channel Mode"]
|
|
rs = RadioSetting("workmode_a", "Radio Work Mode(A)",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.workmode_a]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("workmode_b", "Radio Work Mode(B)",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.workmode_b]))
|
|
basic.append(rs)
|
|
|
|
options = ["Frequency", "Name", "Channel"]
|
|
rs = RadioSetting("mdf_a", "Display Format(F1)",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.mdf_a]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("mdf_b", "Display Format(F2)",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.mdf_b]))
|
|
basic.append(rs)
|
|
|
|
options = ["Off", "BOT", "EOT", "Both"]
|
|
rs = RadioSetting("pttid", "PTT-ID",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.pttid]))
|
|
basic.append(rs)
|
|
|
|
dtmfchars = "0123456789ABCD"
|
|
_codeobj = self._memobj.pttid.code
|
|
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
|
|
val = RadioSettingValueString(0, 6, _code, False)
|
|
val.set_charset(dtmfchars)
|
|
rs = RadioSetting("pttid.code", "PTT-ID Code", val)
|
|
def apply_code(setting, obj):
|
|
code = []
|
|
for j in range(0, 6):
|
|
try:
|
|
code.append(dtmfchars.index(str(setting.value)[j]))
|
|
except IndexError:
|
|
code.append(0xFF)
|
|
obj.code = code
|
|
rs.set_apply_callback(apply_code, self._memobj.pttid)
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("squelch", "Squelch Level",
|
|
RadioSettingValueInteger(0, 9, self._memobj.settings.squelch))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("vox", "VOX Level",
|
|
RadioSettingValueInteger(0, 9, self._memobj.settings.vox))
|
|
basic.append(rs)
|
|
|
|
options = ["Frequency Mode", "Channel Mode"]
|
|
rs = RadioSetting("workmode_fm", "FM Work Mode",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.workmode_fm]))
|
|
basic.append(rs)
|
|
|
|
options = ["Current Frequency", "F1 Frequency", "F2 Frequency"]
|
|
rs = RadioSetting("txtdr", "Dual Standby TX Priority",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.txtdr]))
|
|
basic.append(rs)
|
|
|
|
options = ["English", "Chinese"]
|
|
rs = RadioSetting("language", "Language",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.language]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("tdr", "Dual Standby",
|
|
RadioSettingValueBoolean(self._memobj.settings.tdr))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("roger", "Roger Beep",
|
|
RadioSettingValueBoolean(self._memobj.settings.roger))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("backlight", "Backlight",
|
|
RadioSettingValueBoolean(self._memobj.settings.backlight))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("save_funct", "Save Mode",
|
|
RadioSettingValueBoolean(self._memobj.settings.save_funct))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("fm", "FM Function",
|
|
RadioSettingValueBoolean(self._memobj.settings.fm))
|
|
basic.append(rs)
|
|
|
|
options = ["Enabled", "Disabled"]
|
|
rs = RadioSetting("beep_tone", "Beep Prompt",
|
|
RadioSettingValueList(options,
|
|
options[self._memobj.settings.beep_tone]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voice_prompt", "Voice Prompt",
|
|
RadioSettingValueBoolean(self._memobj.settings.voice_prompt))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("sidetone", "DTMF Side Tone",
|
|
RadioSettingValueBoolean(self._memobj.settings.sidetone))
|
|
basic.append(rs)
|
|
|
|
_limit = int(self._memobj.limits.lower_vhf) / 10
|
|
rs = RadioSetting("limits.lower_vhf", "VHF Lower Limit (MHz)",
|
|
RadioSettingValueInteger(136, 174, _limit))
|
|
def apply_limit(setting, obj):
|
|
value = int(setting.value) * 10
|
|
obj.lower_vhf = value
|
|
rs.set_apply_callback(apply_limit, self._memobj.limits)
|
|
basic.append(rs)
|
|
|
|
_limit = int(self._memobj.limits.upper_vhf) / 10
|
|
rs = RadioSetting("limits.upper_vhf", "VHF Upper Limit (MHz)",
|
|
RadioSettingValueInteger(136, 174, _limit))
|
|
def apply_limit(setting, obj):
|
|
value = int(setting.value) * 10
|
|
obj.upper_vhf = value
|
|
rs.set_apply_callback(apply_limit, self._memobj.limits)
|
|
basic.append(rs)
|
|
|
|
_limit = int(self._memobj.limits.lower_uhf) / 10
|
|
rs = RadioSetting("limits.lower_uhf", "UHF Lower Limit (MHz)",
|
|
RadioSettingValueInteger(400, 520, _limit))
|
|
def apply_limit(setting, obj):
|
|
value = int(setting.value) * 10
|
|
obj.lower_uhf = value
|
|
rs.set_apply_callback(apply_limit, self._memobj.limits)
|
|
basic.append(rs)
|
|
|
|
_limit = int(self._memobj.limits.upper_uhf) / 10
|
|
rs = RadioSetting("limits.upper_uhf", "UHF Upper Limit (MHz)",
|
|
RadioSettingValueInteger(400, 520, _limit))
|
|
def apply_limit(setting, obj):
|
|
value = int(setting.value) * 10
|
|
obj.upper_uhf = value
|
|
rs.set_apply_callback(apply_limit, self._memobj.limits)
|
|
basic.append(rs)
|
|
|
|
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Presets")
|
|
group.append(fm_preset)
|
|
|
|
for i in range(0, 16):
|
|
if self._memobj.fm_presets[i] < 0x01AF:
|
|
used = True
|
|
preset = self._memobj.fm_presets[i] / 10.0 + 65
|
|
else:
|
|
used = False
|
|
preset = 65
|
|
rs = RadioSetting("fm_presets_%1i" % i, "FM Preset %i" % (i + 1),
|
|
RadioSettingValueBoolean(used),
|
|
RadioSettingValueFloat(65, 108, preset, 0.1, 1))
|
|
fm_preset.append(rs)
|
|
|
|
testmode = RadioSettingGroup("testmode", "Test Mode Settings")
|
|
group.append(testmode)
|
|
|
|
vhfdata = ["136-139", "140-144", "145-149", "150-154",
|
|
"155-159", "160-164", "165-169", "170-174"]
|
|
uhfdata = ["400-409", "410-419", "420-429", "430-439",
|
|
"440-449", "450-459", "460-469", "470-479"]
|
|
powernamedata = ["Hi", "Lo"]
|
|
powerkeydata = ["hipwr", "lopwr"]
|
|
|
|
for power in range (0, 2):
|
|
for index in range(0, 8):
|
|
key = "test.vhf%s%i" % (powerkeydata[power], index)
|
|
name = "%s Mhz %s Power" % (vhfdata[index],
|
|
powernamedata[power])
|
|
rs = RadioSetting(key, name, RadioSettingValueInteger(0, 255,
|
|
getattr(self._memobj.test, "vhf%s%i"
|
|
% (powerkeydata[power], index))))
|
|
testmode.append(rs)
|
|
|
|
for power in range (0, 2):
|
|
for index in range(0, 8):
|
|
key = "test.uhf%s%i" % (powerkeydata[power], index)
|
|
name = "%s Mhz %s Power" % (uhfdata[index],
|
|
powernamedata[power])
|
|
rs = RadioSetting(key, name, RadioSettingValueInteger(0, 255,
|
|
getattr(self._memobj.test, "uhf%s%i"
|
|
% (powerkeydata[power], index))))
|
|
testmode.append(rs)
|
|
|
|
for band in ["vhf", "uhf"]:
|
|
for index in range(0, 10):
|
|
key = "test.%ssquelch%i" % (band, index)
|
|
name = "%s Squelch %i" % (band.upper(), index)
|
|
rs = RadioSetting(key, name, RadioSettingValueInteger(0, 255,
|
|
getattr(self._memobj.test, "%ssquelch%i"
|
|
% (band, index))))
|
|
testmode.append(rs)
|
|
|
|
return group
|
|
|
|
def set_settings(self, settings):
|
|
_settings = self._memobj.settings
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
if element.get_name() == "fm_preset" :
|
|
self._set_fm_preset(element)
|
|
else:
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
name = element.get_name()
|
|
if "." in name:
|
|
bits = name.split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
if "/" in bit:
|
|
bit, index = bit.split("/", 1)
|
|
index = int(index)
|
|
obj = getattr(obj, bit)[index]
|
|
else:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = _settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
print "Using apply callback"
|
|
element.run_apply_callback()
|
|
else:
|
|
print "Setting %s = %s" % (setting, element.value)
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
print element.get_name()
|
|
raise
|
|
|
|
def _set_fm_preset(self, settings):
|
|
for element in settings:
|
|
try:
|
|
index = (int(element.get_name().split("_")[-1]))
|
|
val = element.value
|
|
if val[0].get_value():
|
|
value = int(val[1].get_value() * 10 - 650)
|
|
else:
|
|
value = 0x01AF
|
|
print "Setting fm_presets[%1i] = %s" % (index, value)
|
|
setting = self._memobj.fm_presets
|
|
setting[index] = value
|
|
except Exception, e:
|
|
print element.get_name()
|
|
raise
|
|
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
return (filedata.startswith("KT511 Radio Program data") and
|
|
len(filedata) == (cls._memsize + 0x30))
|