Project

General

Profile

Bug #10210 » lt725uv-BJ318Rev05.09.21.py

Driver - Mark Hartong, 01/01/2023 03:11 PM

 
# Copyright 2016-2021:
# * Jim Unroe KC9HI, <rock.unroe@gmail.com>
# Modified for Baojie BJ-218: 2018
# Rick DeWitt (RJD), <aa0rd@yahoo.com>
# Modified for Baojie BJ-318: April 2021
# Mark Hartong, AJ4YI <mark.hartong@verizon.net>
# Changes for Baojie-318: May 2021
# -Removed Experimental Warning
# -Added Brown and Yellow as Color Selections
# -Max VFO Volume Setting to 15 (vice 10)
# Mark Hartong, AJ4YI <mark.hartong@verizon.net>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

import time
import struct
import logging
import re

from chirp import chirp_common, directory, memmap
from chirp import bitwise, errors, util
from chirp.settings import RadioSettingGroup, RadioSetting, \
RadioSettingValueBoolean, RadioSettingValueList, \
RadioSettingValueString, RadioSettingValueInteger, \
RadioSettingValueFloat, RadioSettings, InvalidValueError
from textwrap import dedent

LOG = logging.getLogger(__name__)

MEM_FORMAT = """
#seekto 0x0200;
struct {
u8 init_bank; // determines which VFO is primary A or B
u8 volume; // not used BJ-318, band volume is controlled vfo u8 bvol
u16 fm_freq; // not used BJ-318, freq is controlled hello_lims u16 fm_318
u8 wtled; // not used BJ-318
u8 rxled; // not used BJ-318
u8 txled; // not used BJ-318
u8 ledsw;
u8 beep;
u8 ring;
u8 bcl;
u8 tot;
u16 sig_freq;
u16 dtmf_txms;
u8 init_sql; // not used BJ-318, band squelch is controlled vfo u8 sql
u8 rptr_mode;
} settings;

#seekto 0x0240;
struct {
u8 dtmf1_cnt;
u8 dtmf1[7];
u8 dtmf2_cnt;
u8 dtmf2[7];
u8 dtmf3_cnt;
u8 dtmf3[7];
u8 dtmf4_cnt;
u8 dtmf4[7];
u8 dtmf5_cnt;
u8 dtmf5[7];
u8 dtmf6_cnt;
u8 dtmf6[7];
u8 dtmf7_cnt;
u8 dtmf7[7];
u8 dtmf8_cnt;
u8 dtmf8[7];
} dtmf_tab;

#seekto 0x0280;
struct {
u8 native_id_cnt;
u8 native_id_code[7];
u8 master_id_cnt;
u8 master_id_code[7];
u8 alarm_cnt;
u8 alarm_code[5];
u8 id_disp_cnt;
u8 id_disp_code[5];
u8 revive_cnt;
u8 revive_code[5];
u8 stun_cnt;
u8 stun_code[5];
u8 kill_cnt;
u8 kill_code[5];
u8 monitor_cnt;
u8 monitor_code[5];
u8 state_now;
} codes;

#seekto 0x02d0;
struct {
u8 hello1_cnt; // not used in BJ-318, is set in memory map
char hello1[7]; // not used in BJ-318, is set in memory map
u8 hello2_cnt; // not used in BJ-318, is set in memory map
char hello2[7]; // not used in BJ-318, is set in memory map
u32 vhf_low;
u32 vhf_high;
u32 uhf_low;
u32 uhf_high;
u8 lims_on; // first byte @ at address 0x02f0;
u8 unknown_1; // use in BJ-318 unknown
u8 lang; // BJ-318 Display language
// 02 = English 00 and 01 are Asian
u8 up_scr_color; // BJ-318 upper screen character color
u8 dn_scr_color; // BJ-318 lower screen character color
// purple=00, red=01, emerald=02, blue=03,
// sky_blue=04, black=05, brown=06, yellow=07
// required hex values for color
// Note: sky_blue and black look the same on the
// BJ-318 screen
u16 fm_318; // FM stored Frequency in BJ-318
} hello_lims;

struct vfo {
u8 frq_chn_mode;
u8 chan_num;
u32 rxfreq;
u16 is_rxdigtone:1,
rxdtcs_pol:1,
rx_tone:14;
u8 rx_mode;
u8 unknown_ff;
u16 is_txdigtone:1,
txdtcs_pol:1,
tx_tone:14;
u8 launch_sig;
u8 tx_end_sig;
u8 bpower; // sets power Hi=02h, Medium=01h, Low=00h
// sets power for entire vfo band
u8 fm_bw;
u8 cmp_nder;
u8 scrm_blr;
u8 shift;
u32 offset;
u16 step;
u8 sql; // squelch for entire vfo band
// integer values 0 (low) to 9 (high)
u8 bvol; // volume for vfo band
// integer values 0 (low) TO 15 (high)
// in the BJ-318
};

#seekto 0x0300;
struct {
struct vfo vfoa;
} upper;

#seekto 0x0380;
struct {
struct vfo vfob;
} lower;

struct mem {
u32 rxfreq;
u16 is_rxdigtone:1,
rxdtcs_pol:1,
rxtone:14;
u8 recvmode;
u32 txfreq;
u16 is_txdigtone:1,
txdtcs_pol:1,
txtone:14;
u8 botsignal;
u8 eotsignal;
u8 power:1, // binary value for
// indiviudal channel power
// set to "High" or "Low"
// BJ-318 band power overrides any
// individual channel power setting
wide:1,
compandor:1
scrambler:1
unknown:4;
u8 namelen;
u8 name[7];
};

#seekto 0x0400;
struct mem upper_memory[128];

#seekto 0x1000;
struct mem lower_memory[128];

#seekto 0x1C00;
struct {
char mod_num[6];
} mod_id;
"""

MEM_SIZE = 0x1C00
BLOCK_SIZE = 0x40
STIMEOUT = 2
LIST_RECVMODE = ["QT/DQT", "QT/DQT + Signaling"]
LIST_SIGNAL = ["Off"] + ["DTMF%s" % x for x in range(1, 9)] + \
["DTMF%s + Identity" % x for x in range(1, 9)] + \
["Identity code"]
# Band Power settings, can be different than channel power
LIST_BPOWER = ["Low", "Mid", "High"] # Tri-power models

# Screen Color Settings
# BJ-218 Colors
LIST_COLOR = ["Off", "Orange", "Blue", "Purple"]
# BJ-318 Colors
LIST_COLOR318 = ["Purple", "Red", "Emerald", "Blue", "Sky_Blue", "Black", "Brown", "Yellow"]
LIST_LEDSW = ["Auto", "On"]
LIST_RING = ["Off"] + ["%s" % x for x in range(1, 10)]
LIST_TDR_DEF = ["A-Upper", "B-Lower"]
LIST_TIMEOUT = ["Off"] + ["%s" % x for x in range(30, 630, 30)]
LIST_VFOMODE = ["Frequency Mode", "Channel Mode"]
# Tones are numeric, Defined in \chirp\chirp_common.py
TONES_CTCSS = sorted(chirp_common.TONES)
# Converted to strings
LIST_CTCSS = ["Off"] + [str(x) for x in TONES_CTCSS]
# Now append the DxxxN and DxxxI DTCS codes from chirp_common
for x in chirp_common.DTCS_CODES:
LIST_CTCSS.append("D{:03d}N".format(x))
for x in chirp_common.DTCS_CODES:
LIST_CTCSS.append("D{:03d}R".format(x))
LIST_BW = ["Narrow", "Wide"]
LIST_SHIFT = ["Off", " + ", " - "]
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 20.0, 25.0, 50.0]
LIST_STEPS = [str(x) for x in STEPS]
LIST_STATE = ["Normal", "Stun", "Kill"]
LIST_SSF = ["1000", "1450", "1750", "2100"]
LIST_DTMFTX = ["50", "100", "150", "200", "300", "500"]

SETTING_LISTS = {
"init_bank": LIST_TDR_DEF,
"tot": LIST_TIMEOUT,
"wtled": LIST_COLOR, # not used in BJ-318, other radios use
"rxled": LIST_COLOR, # not used in BJ-318, other radios use
"txled": LIST_COLOR, # not used in BJ-318, other radios use
"sig_freq": LIST_SSF,
"dtmf_txms": LIST_DTMFTX,
"ledsw": LIST_LEDSW,
"frq_chn_mode": LIST_VFOMODE,
"rx_tone": LIST_CTCSS,
"tx_tone": LIST_CTCSS,
"rx_mode": LIST_RECVMODE,
"launch_sig": LIST_SIGNAL,
"tx_end_sig": LIST_SIGNAL,
"bpower": LIST_BPOWER,
"fm_bw": LIST_BW,
"shift": LIST_SHIFT,
"step": LIST_STEPS,
"ring": LIST_RING,
"state_now": LIST_STATE,
"up_scr_color": LIST_COLOR318, # unique to BJ-318
"dn_scr_color": LIST_COLOR318, # unique to BJ-318
}


def _clean_buffer(radio):
radio.pipe.timeout = 0.005
junk = radio.pipe.read(256)
radio.pipe.timeout = STIMEOUT
if junk:
Log.debug("Got %i bytes of junk before starting" % len(junk))


def _rawrecv(radio, amount):
"""Raw read from the radio device"""
data = ""
try:
data = radio.pipe.read(amount)
except:
_exit_program_mode(radio)
msg = "Generic error reading data from radio; check your cable."
raise errors.RadioError(msg)

if len(data) != amount:
_exit_program_mode(radio)
msg = "Error reading from radio: not the amount of data we want."
raise errors.RadioError(msg)

return data


def _rawsend(radio, data):
"""Raw send to the radio device"""
try:
radio.pipe.write(data)
except:
raise errors.RadioError("Error sending data to radio")


def _make_frame(cmd, addr, length, data=""):
"""Pack the info in the headder format"""
frame = struct.pack(">4sHH", cmd, addr, length)
# Add the data if set
if len(data) != 0:
frame += data
# Return the data
return frame


def _recv(radio, addr, length):
"""Get data from the radio """

data = _rawrecv(radio, length)

# DEBUG
LOG.info("Response:")
LOG.debug(util.hexprint(data))

return data


def _do_ident(radio):
"""Put the radio in PROGRAM mode & identify it"""
# Set the serial discipline
radio.pipe.baudrate = 19200
radio.pipe.parity = "N"
radio.pipe.timeout = STIMEOUT

# Flush input buffer
_clean_buffer(radio)

magic = "PROM_LIN"

_rawsend(radio, magic)

ack = _rawrecv(radio, 1)
if ack != "\x06":
_exit_program_mode(radio)
if ack:
LOG.debug(repr(ack))
raise errors.RadioError("Radio did not respond")

return True


def _exit_program_mode(radio):
endframe = "EXIT"
_rawsend(radio, endframe)


def _download(radio):
"""Get the memory map"""

# Put radio in program mode and identify it
_do_ident(radio)

# UI progress
status = chirp_common.Status()
status.cur = 0
status.max = MEM_SIZE / BLOCK_SIZE
status.msg = "Cloning from radio..."
radio.status_fn(status)

data = ""
for addr in range(0, MEM_SIZE, BLOCK_SIZE):
frame = _make_frame("READ", addr, BLOCK_SIZE)
# DEBUG
LOG.info("Request sent:")
LOG.debug(util.hexprint(frame))

# Sending the read request
_rawsend(radio, frame)

# Now we read
d = _recv(radio, addr, BLOCK_SIZE)

# Aggregate the data
data += d

# UI Update
status.cur = addr / BLOCK_SIZE
status.msg = "Cloning from radio..."
radio.status_fn(status)

_exit_program_mode(radio)

data += radio.MODEL.ljust(8)

return data


def _upload(radio):
"""Upload procedure"""

# Put radio in program mode and identify it
_do_ident(radio)

# UI progress
status = chirp_common.Status()
status.cur = 0
status.max = MEM_SIZE / BLOCK_SIZE
status.msg = "Cloning to radio..."
radio.status_fn(status)

# The fun starts here
for addr in range(0, MEM_SIZE, BLOCK_SIZE):
# Sending the data
data = radio.get_mmap()[addr:addr + BLOCK_SIZE]

frame = _make_frame("WRIE", addr, BLOCK_SIZE, data)

_rawsend(radio, frame)

# Receiving the response
ack = _rawrecv(radio, 1)
if ack != "\x06":
_exit_program_mode(radio)
msg = "Bad ack writing block 0x%04x" % addr
raise errors.RadioError(msg)

# UI Update
status.cur = addr / BLOCK_SIZE
status.msg = "Cloning to radio..."
radio.status_fn(status)

_exit_program_mode(radio)


def model_match(cls, data):
"""Match the opened/downloaded image to the correct version"""
if len(data) == 0x1C08:
rid = data[0x1C00:0x1C08]
return rid.startswith(cls.MODEL)
else:
return False


def _split(rf, f1, f2):
"""Returns False if the two freqs are in the same band (no split)
or True otherwise"""

# Determine if the two freqs are in the same band
for low, high in rf.valid_bands:
if f1 >= low and f1 <= high and \
f2 >= low and f2 <= high:
# If the two freqs are on the same Band this is not a split
return False

# If you get here is because the freq pairs are split
return True


@directory.register
class LT725UV(chirp_common.CloneModeRadio):
"""LUITON LT-725UV Radio"""
VENDOR = "LUITON"
MODEL = "LT-725UV"
MODES = ["NFM", "FM"]
TONES = chirp_common.TONES
DTCS_CODES = sorted(chirp_common.DTCS_CODES + [645])
NAME_LENGTH = 7
DTMF_CHARS = list("0123456789ABCD*#")

# Channel Power: 2 levels
# BJ-318 uses 3 power levels for each VFO "Band"
# Low = 5W, Med = 10W, High = 25W
# The band power selection in a VFO applies to the VFO and overrides
# the stored channel power selection
# The firmware chanel memory structure provides only 1 bit for
# individual chanel power settings, limiting potential channel
# power selection options to 2 levels: Low or High.
POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=5.00),
chirp_common.PowerLevel("High", watts=30.00)]

VALID_BANDS = [(136000000, 176000000),
(400000000, 480000000)]

# Valid chars on the LCD
VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \
"`{|}!\"#$%&'()*+,-./:;<=>?@[]^_"

@classmethod
def get_prompts(cls):
rp = chirp_common.RadioPrompts()
if cls.MODEL == "BJ-318":
msg = \
(' BJ-318\n'
'\n'
'The individual channel power settings are ignored by \n'
'the radio. They are allowed to be set in hopes of a \n'
'future firmware change. Changing a stored channel power \n'
'setting must be done manually using the front panel menu \n'
'control (or the microphone control controls while in VFO \n'
'mode) to change the VFO power. The CHIRP driver will \n'
'allow setting the individual VFO power to High (25W), \n'
'Med (10W) or Low (5W) and setting the unused individual \n'
'channel power setting to High (25W) or Low (5W)'
)

else:
msg = \
('Some notes about POWER settings:\n'
'- The individual channel power settings are ignored'
' by the radio.\n'
' They are allowed to be set (and downloaded) in hopes of'
' a future firmware update.\n'
'- Power settings done \'Live\' in the radio apply to the'
' entire upper or lower band.\n'
'- Tri-power radio models will set and download the three'
' band-power'
' levels, but they are converted to just Low and High at'
' upload.'
' The Mid setting reverts to Low.'
)

rp.info = msg

rp.pre_download = _(dedent("""\
Follow this instructions to download your info:

1 - Turn off your radio
2 - Connect your interface cable
3 - Turn on your radio
4 - Do the download of your radio data
"""))
rp.pre_upload = _(dedent("""\
Follow this instructions to upload your info:

1 - Turn off your radio
2 - Connect your interface cable
3 - Turn on your radio
4 - Do the upload of your radio data
"""))
return rp

def get_features(self):
rf = chirp_common.RadioFeatures()
rf.has_settings = True
rf.has_bank = False
rf.has_tuning_step = False
rf.can_odd_split = True
rf.has_name = True
rf.has_offset = True
rf.has_mode = True
rf.has_dtcs = True
rf.has_rx_dtcs = True
rf.has_dtcs_polarity = True
rf.has_ctone = True
rf.has_cross = True
rf.has_sub_devices = self.VARIANT == ""
rf.valid_modes = self.MODES
rf.valid_characters = self.VALID_CHARS
rf.valid_duplexes = ["", "-", "+", "split", "off"]
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
rf.valid_cross_modes = [
"Tone->Tone",
"DTCS->",
"->DTCS",
"Tone->DTCS",
"DTCS->Tone",
"->Tone",
"DTCS->DTCS"]
rf.valid_skips = []
rf.valid_power_levels = self.POWER_LEVELS
rf.valid_name_length = self.NAME_LENGTH
rf.valid_dtcs_codes = self.DTCS_CODES
rf.valid_bands = self.VALID_BANDS
rf.memory_bounds = (1, 128)
rf.valid_tuning_steps = STEPS
return rf

def get_sub_devices(self):
return [LT725UVUpper(self._mmap), LT725UVLower(self._mmap)]

def sync_in(self):
"""Download from radio"""
try:
data = _download(self)
except errors.RadioError:
# Pass through any real errors we raise
raise
except:
# If anything unexpected happens, make sure we raise
# a RadioError and log the problem
LOG.exception('Unexpected error during download')
raise errors.RadioError('Unexpected error communicating '
'with the radio')
self._mmap = memmap.MemoryMap(data)
self.process_mmap()

def sync_out(self):
"""Upload to radio"""
try:
_upload(self)
except:
# If anything unexpected happens, make sure we raise
# a RadioError and log the problem
LOG.exception('Unexpected error during upload')
raise errors.RadioError('Unexpected error communicating '
'with the radio')

def process_mmap(self):
"""Process the mem map into the mem object"""
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)

def get_raw_memory(self, number):
return repr(self._memobj.memory[number - 1])

def _memory_obj(self, suffix=""):
return getattr(self._memobj, "%s_memory%s" % (self._vfo, suffix))

def _get_dcs(self, val):
return int(str(val)[2:-18])

def _set_dcs(self, val):
return int(str(val), 16)

def get_memory(self, number):
_mem = self._memory_obj()[number - 1]

mem = chirp_common.Memory()
mem.number = number

if _mem.get_raw()[0] == "\xff":
mem.empty = True
return mem

mem.freq = int(_mem.rxfreq) * 10

if _mem.txfreq == 0xFFFFFFFF:
# TX freq not set
mem.duplex = "off"
mem.offset = 0
elif int(_mem.rxfreq) == int(_mem.txfreq):
mem.duplex = ""
mem.offset = 0
elif _split(self.get_features(), mem.freq, int(_mem.txfreq) * 10):
mem.duplex = "split"
mem.offset = int(_mem.txfreq) * 10
else:
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10

for char in _mem.name[:_mem.namelen]:
mem.name += chr(char)

dtcs_pol = ["N", "N"]

if _mem.rxtone == 0x3FFF:
rxmode = ""
elif _mem.is_rxdigtone == 0:
# CTCSS
rxmode = "Tone"
mem.ctone = int(_mem.rxtone) / 10.0
else:
# Digital
rxmode = "DTCS"
mem.rx_dtcs = self._get_dcs(_mem.rxtone)
if _mem.rxdtcs_pol == 1:
dtcs_pol[1] = "R"

if _mem.txtone == 0x3FFF:
txmode = ""
elif _mem.is_txdigtone == 0:
# CTCSS
txmode = "Tone"
mem.rtone = int(_mem.txtone) / 10.0
else:
# Digital
txmode = "DTCS"
mem.dtcs = self._get_dcs(_mem.txtone)
if _mem.txdtcs_pol == 1:
dtcs_pol[0] = "R"

if txmode == "Tone" and not rxmode:
mem.tmode = "Tone"
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
mem.tmode = "TSQL"
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
mem.tmode = "DTCS"
elif rxmode or txmode:
mem.tmode = "Cross"
mem.cross_mode = "%s->%s" % (txmode, rxmode)

mem.dtcs_polarity = "".join(dtcs_pol)

mem.mode = _mem.wide and "FM" or "NFM"

mem.power = self.POWER_LEVELS[_mem.power]

# Extra
mem.extra = RadioSettingGroup("extra", "Extra")

if _mem.recvmode == 0xFF:
val = 0x00
else:
val = _mem.recvmode
recvmode = RadioSetting("recvmode", "Receiving mode",
RadioSettingValueList(LIST_RECVMODE,
LIST_RECVMODE[val]))
mem.extra.append(recvmode)

if _mem.botsignal == 0xFF:
val = 0x00
else:
val = _mem.botsignal
botsignal = RadioSetting("botsignal", "Launch signaling",
RadioSettingValueList(LIST_SIGNAL,
LIST_SIGNAL[val]))
mem.extra.append(botsignal)

if _mem.eotsignal == 0xFF:
val = 0x00
else:
val = _mem.eotsignal

rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[val])
eotsignal = RadioSetting("eotsignal", "Transmit end signaling", rx)
mem.extra.append(eotsignal)

rx = RadioSettingValueBoolean(bool(_mem.compandor))
compandor = RadioSetting("compandor", "Compandor", rx)
mem.extra.append(compandor)

rx = RadioSettingValueBoolean(bool(_mem.scrambler))
scrambler = RadioSetting("scrambler", "Scrambler", rx)
mem.extra.append(scrambler)

return mem

def set_memory(self, mem):
_mem = self._memory_obj()[mem.number - 1]

if mem.empty:
_mem.set_raw("\xff" * 24)
_mem.namelen = 0
return

_mem.set_raw("\xFF" * 15 + "\x00\x00" + "\xFF" * 7)

_mem.rxfreq = mem.freq / 10
if mem.duplex == "off":
_mem.txfreq = 0xFFFFFFFF
elif mem.duplex == "split":
_mem.txfreq = mem.offset / 10
elif mem.duplex == "+":
_mem.txfreq = (mem.freq + mem.offset) / 10
elif mem.duplex == "-":
_mem.txfreq = (mem.freq - mem.offset) / 10
else:
_mem.txfreq = mem.freq / 10

_mem.namelen = len(mem.name)
_namelength = self.get_features().valid_name_length
for i in range(_namelength):
try:
_mem.name[i] = ord(mem.name[i])
except IndexError:
_mem.name[i] = 0xFF

rxmode = ""
txmode = ""

if mem.tmode == "Tone":
txmode = "Tone"
elif mem.tmode == "TSQL":
rxmode = "Tone"
txmode = "TSQL"
elif mem.tmode == "DTCS":
rxmode = "DTCSSQL"
txmode = "DTCS"
elif mem.tmode == "Cross":
txmode, rxmode = mem.cross_mode.split("->", 1)

if rxmode == "":
_mem.rxdtcs_pol = 1
_mem.is_rxdigtone = 1
_mem.rxtone = 0x3FFF
elif rxmode == "Tone":
_mem.rxdtcs_pol = 0
_mem.is_rxdigtone = 0
_mem.rxtone = int(mem.ctone * 10)
elif rxmode == "DTCSSQL":
_mem.rxdtcs_pol = 1 if mem.dtcs_polarity[1] == "R" else 0
_mem.is_rxdigtone = 1
_mem.rxtone = self._set_dcs(mem.dtcs)
elif rxmode == "DTCS":
_mem.rxdtcs_pol = 1 if mem.dtcs_polarity[1] == "R" else 0
_mem.is_rxdigtone = 1
_mem.rxtone = self._set_dcs(mem.rx_dtcs)

if txmode == "":
_mem.txdtcs_pol = 1
_mem.is_txdigtone = 1
_mem.txtone = 0x3FFF
elif txmode == "Tone":
_mem.txdtcs_pol = 0
_mem.is_txdigtone = 0
_mem.txtone = int(mem.rtone * 10)
elif txmode == "TSQL":
_mem.txdtcs_pol = 0
_mem.is_txdigtone = 0
_mem.txtone = int(mem.ctone * 10)
elif txmode == "DTCS":
_mem.txdtcs_pol = 1 if mem.dtcs_polarity[0] == "R" else 0
_mem.is_txdigtone = 1
_mem.txtone = self._set_dcs(mem.dtcs)

_mem.wide = self.MODES.index(mem.mode)
_mem.power = mem.power == self.POWER_LEVELS[1]

# Extra settings
for setting in mem.extra:
setattr(_mem, setting.get_name(), setting.value)

def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
# Define mem struct write-back shortcuts
_sets = self._memobj.settings
_vfoa = self._memobj.upper.vfoa
_vfob = self._memobj.lower.vfob
_lims = self._memobj.hello_lims
_codes = self._memobj.codes
_dtmf = self._memobj.dtmf_tab

basic = RadioSettingGroup("basic", "Basic Settings")
a_band = RadioSettingGroup("a_band", "VFO A-Upper Settings")
b_band = RadioSettingGroup("b_band", "VFO B-Lower Settings")
codes = RadioSettingGroup("codes", "Codes & DTMF Groups")
lims = RadioSettingGroup("lims", "PowerOn & Freq Limits")
group = RadioSettings(basic, a_band, b_band, lims, codes)

# Basic Settings
bnd_mode = RadioSetting("settings.init_bank", "TDR Band Default",
RadioSettingValueList(LIST_TDR_DEF,
LIST_TDR_DEF[
_sets.init_bank]))
basic.append(bnd_mode)

# BJ-318 set by vfo, skip
if self.MODEL != "BJ-318":
rs = RadioSettingValueInteger(0, 20, _sets.volume)
volume = RadioSetting("settings.volume", "Volume", rs)
basic.append(volume)

# BJ-318 set by vfo, skip
if self.MODEL != "BJ-318":
vala = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High
rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[vala])
powera = RadioSetting("upper.vfoa.bpower", "Power (Upper)", rx)
basic.append(powera)

# BJ-318 set by vfo, skip
if self.MODEL != "BJ-318":
valb = _vfob.bpower
rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[valb])
powerb = RadioSetting("lower.vfob.bpower", "Power (Lower)", rx)
basic.append(powerb)

def my_word2raw(setting, obj, atrb, mlt=10):
"""Callback function to convert UI floating value to u16 int"""
if str(setting.value) == "Off":
frq = 0x0FFFF
else:
frq = int(float(str(setting.value)) * float(mlt))
if frq == 0:
frq = 0xFFFF
setattr(obj, atrb, frq)
return

def my_adjraw(setting, obj, atrb, fix):
"""Callback: add or subtract fix from value."""
vx = int(str(setting.value))
value = vx + int(fix)
if value < 0:
value = 0
if atrb == "frq_chn_mode" and int(str(setting.value)) == 2:
value = vx * 2 # Special handling for frq_chn_mode
setattr(obj, atrb, value)
return

def my_dbl2raw(setting, obj, atrb, flg=1):
"""Callback: convert from freq 146.7600 to 14760000 U32."""
value = chirp_common.parse_freq(str(setting.value)) / 10
# flg=1 means 0 becomes ff, else leave as possible 0
if flg == 1 and value == 0:
value = 0xFFFFFFFF
setattr(obj, atrb, value)
return

def my_val_list(setting, obj, atrb):
"""Callback:from ValueList with non-sequential, actual values."""
value = int(str(setting.value)) # Get the integer value
if atrb == "tot":
value = int(value / 30) # 30 second increments
setattr(obj, atrb, value)
return

def my_spcl(setting, obj, atrb):
"""Callback: Special handling based on atrb."""
if atrb == "frq_chn_mode":
idx = LIST_VFOMODE.index(str(setting.value)) # Returns 0 or 1
value = idx * 2 # Set bit 1
setattr(obj, atrb, value)
return

def my_tone_strn(obj, is_atr, pol_atr, tone_atr):
"""Generate the CTCS/DCS tone code string."""
vx = int(getattr(obj, tone_atr))
if vx == 16383 or vx == 0:
return "Off" # 16383 is all bits set
if getattr(obj, is_atr) == 0: # Simple CTCSS code
tstr = str(vx / 10.0)
else: # DCS
if getattr(obj, pol_atr) == 0:
tstr = "D{:03x}R".format(vx)
else:
tstr = "D{:03x}N".format(vx)
return tstr

def my_set_tone(setting, obj, is_atr, pol_atr, tone_atr):
"""Callback- create the tone setting from string code."""
sx = str(setting.value) # '131.8' or 'D231N' or 'Off'
if sx == "Off":
isx = 1
polx = 1
tonx = 0x3FFF
elif sx[0] == "D": # DCS
isx = 1
if sx[4] == "N":
polx = 1
else:
polx = 0
tonx = int(sx[1:4], 16)
else: # CTCSS
isx = 0
polx = 0
tonx = int(float(sx) * 10.0)
setattr(obj, is_atr, isx)
setattr(obj, pol_atr, polx)
setattr(obj, tone_atr, tonx)
return

# not used by BJ-318 skip
if self.MODEL != "BJ-318":
val = _sets.fm_freq / 10.0
if val == 0:
val = 88.9 # 0 is not valid
rx = RadioSettingValueFloat(65, 108.0, val, 0.1, 1)
rs = RadioSetting("settings.fm_freq",
"FM Broadcast Freq (MHz)", rx)
rs.set_apply_callback(my_word2raw, _sets, "fm_freq")
basic.append(rs)

# BJ-318 fm frequency
if self.MODEL == "BJ-318":
val = _lims.fm_318 / 10.0
if val == 0:
val = 88.9 # 0 is not valid
rx = RadioSettingValueFloat(65, 108.0, val, 0.1, 1)
rs = RadioSetting("hello_lims.fm_318",
"FM Broadcast Freq (MHz)", rx)
rs.set_apply_callback(my_word2raw, _lims, "fm_318")
basic.append(rs)

# not used in BJ-318, skip
if self.MODEL != "BJ-318":
rs = RadioSettingValueList(LIST_COLOR,
LIST_COLOR[_sets.wtled])
wtled = RadioSetting("settings.wtled", "Standby LED Color", rs)
basic.append(wtled)

# not used in BJ-318, skip
if self.MODEL != "BJ-318":
rs = RadioSettingValueList(LIST_COLOR,
LIST_COLOR[_sets.rxled])
rxled = RadioSetting("settings.rxled", "RX LED Color", rs)
basic.append(rxled)

# not used in BJ-318, skip
if self.MODEL != "BJ-318":
rs = RadioSettingValueList(LIST_COLOR,
LIST_COLOR[_sets.txled])
txled = RadioSetting("settings.txled", "TX LED Color", rs)
basic.append(txled)

ledsw = RadioSetting("settings.ledsw", "Back light mode",
RadioSettingValueList(LIST_LEDSW, LIST_LEDSW[
_sets.ledsw]))
basic.append(ledsw)

beep = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(bool(_sets.beep)))
basic.append(beep)

ring = RadioSetting("settings.ring", "Ring",
RadioSettingValueList(LIST_RING, LIST_RING[
_sets.ring]))
basic.append(ring)

bcl = RadioSetting("settings.bcl", "Busy channel lockout",
RadioSettingValueBoolean(bool(_sets.bcl)))
basic.append(bcl)

# squelch for non-BJ-318 models
# BJ-318 squelch set by VFO basis
if self.MODEL != "BJ-318":
if _vfoa.sql == 0xFF:
val = 0x04
else:
val = _vfoa.sql
sqla = RadioSetting("upper.vfoa.sql", "Squelch (Upper)",
RadioSettingValueInteger(0, 9, val))
basic.append(sqla)

if _vfob.sql == 0xFF:
val = 0x04
else:
val = _vfob.sql
sqlb = RadioSetting("lower.vfob.sql", "Squelch (Lower)",
RadioSettingValueInteger(0, 9, val))
basic.append(sqlb)

tmp = str(int(_sets.tot) * 30) # 30 sec step counter
rs = RadioSetting("settings.tot", "Transmit Timeout (Secs)",
RadioSettingValueList(LIST_TIMEOUT, tmp))
rs.set_apply_callback(my_val_list, _sets, "tot")
basic.append(rs)

tmp = str(int(_sets.sig_freq))
rs = RadioSetting("settings.sig_freq", "Single Signaling Tone (Htz)",
RadioSettingValueList(LIST_SSF, tmp))
rs.set_apply_callback(my_val_list, _sets, "sig_freq")
basic.append(rs)

tmp = str(int(_sets.dtmf_txms))
rs = RadioSetting("settings.dtmf_txms", "DTMF Tx Duration (mSecs)",
RadioSettingValueList(LIST_DTMFTX, tmp))
rs.set_apply_callback(my_val_list, _sets, "dtmf_txms")
basic.append(rs)

rs = RadioSetting("settings.rptr_mode", "Repeater Mode",
RadioSettingValueBoolean(bool(_sets.rptr_mode)))
basic.append(rs)

# UPPER BAND SETTINGS

# Freq Mode, convert bit 1 state to index pointer
val = _vfoa.frq_chn_mode / 2

rx = RadioSettingValueList(LIST_VFOMODE, LIST_VFOMODE[val])
rs = RadioSetting("upper.vfoa.frq_chn_mode", "Default Mode", rx)
rs.set_apply_callback(my_spcl, _vfoa, "frq_chn_mode")
a_band.append(rs)

val = _vfoa.chan_num + 1 # Add 1 for 1-128 displayed
rs = RadioSetting("upper.vfoa.chan_num", "Initial Chan",
RadioSettingValueInteger(1, 128, val))
rs.set_apply_callback(my_adjraw, _vfoa, "chan_num", -1)
a_band.append(rs)

val = _vfoa.rxfreq / 100000.0
if (val < 136.0 or val > 176.0):
val = 146.520 # 2m calling
rs = RadioSetting("upper.vfoa.rxfreq ", "Default Recv Freq (MHz)",
RadioSettingValueFloat(136.0, 176.0, val, 0.001, 5))
rs.set_apply_callback(my_dbl2raw, _vfoa, "rxfreq")
a_band.append(rs)

tmp = my_tone_strn(_vfoa, "is_rxdigtone", "rxdtcs_pol", "rx_tone")
rs = RadioSetting("rx_tone", "Default Recv CTCSS (Htz)",
RadioSettingValueList(LIST_CTCSS, tmp))
rs.set_apply_callback(my_set_tone, _vfoa, "is_rxdigtone",
"rxdtcs_pol", "rx_tone")
a_band.append(rs)

rx = RadioSettingValueList(LIST_RECVMODE,
LIST_RECVMODE[_vfoa.rx_mode])
rs = RadioSetting("upper.vfoa.rx_mode", "Default Recv Mode", rx)
a_band.append(rs)

tmp = my_tone_strn(_vfoa, "is_txdigtone", "txdtcs_pol", "tx_tone")
rs = RadioSetting("tx_tone", "Default Xmit CTCSS (Htz)",
RadioSettingValueList(LIST_CTCSS, tmp))
rs.set_apply_callback(my_set_tone, _vfoa, "is_txdigtone",
"txdtcs_pol", "tx_tone")
a_band.append(rs)

rs = RadioSetting("upper.vfoa.launch_sig", "Launch Signaling",
RadioSettingValueList(LIST_SIGNAL,
LIST_SIGNAL[_vfoa.launch_sig]))
a_band.append(rs)

rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfoa.tx_end_sig])
rs = RadioSetting("upper.vfoa.tx_end_sig", "Xmit End Signaling", rx)
a_band.append(rs)

rx = RadioSettingValueList(LIST_BW, LIST_BW[_vfoa.fm_bw])
rs = RadioSetting("upper.vfoa.fm_bw", "Wide/Narrow Band", rx)
a_band.append(rs)

rx = RadioSettingValueBoolean(bool(_vfoa.cmp_nder))
rs = RadioSetting("upper.vfoa.cmp_nder", "Compandor", rx)
a_band.append(rs)

rs = RadioSetting("upper.vfoa.scrm_blr", "Scrambler",
RadioSettingValueBoolean(bool(_vfoa.scrm_blr)))
a_band.append(rs)

rx = RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[_vfoa.shift])
rs = RadioSetting("upper.vfoa.shift", "Xmit Shift", rx)
a_band.append(rs)

val = _vfoa.offset / 100000.0
rs = RadioSetting("upper.vfoa.offset", "Xmit Offset (MHz)",
RadioSettingValueFloat(0, 100.0, val, 0.001, 3))
# Allow zero value
rs.set_apply_callback(my_dbl2raw, _vfoa, "offset", 0)
a_band.append(rs)

tmp = str(_vfoa.step / 100.0)
rs = RadioSetting("step", "Freq step (KHz)",
RadioSettingValueList(LIST_STEPS, tmp))
rs.set_apply_callback(my_word2raw, _vfoa, "step", 100)
a_band.append(rs)

# BJ-318 upper band squelch
if self.MODEL == "BJ-318":
if _vfoa.sql == 0xFF:
valq = 0x04 # setting default squelch to 04
else:
valq = _vfoa.sql
sqla = RadioSetting("upper.vfoa.sql", "Squelch",
RadioSettingValueInteger(0, 9, valq))
a_band.append(sqla)

# BJ-318 upper band volume
if self.MODEL == "BJ-318":
bvolume_u = RadioSetting("upper.vfoa.bvol",
"Volume", RadioSettingValueInteger(
0, 15, _vfoa.bvol))
a_band.append(bvolume_u)

# BJ-318 Upper Screen Color
if self.MODEL == "BJ-318":
rs_u = RadioSettingValueList(LIST_COLOR318,
LIST_COLOR318[_lims.up_scr_color])
up_scr_color = RadioSetting("hello_lims.up_scr_color",
"Screen Color", rs_u)
a_band.append(up_scr_color)

# BJ-318 Upper band power
if self.MODEL == "BJ-318":
val_b = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High
rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val_b])
power_u = RadioSetting("upper.vfoa.bpower", "Power", rx)
a_band.append(power_u)

# LOWER BAND SETTINGS

val = _vfob.frq_chn_mode / 2
rx = RadioSettingValueList(LIST_VFOMODE, LIST_VFOMODE[val])
rs = RadioSetting("lower.vfob.frq_chn_mode", "Default Mode", rx)
rs.set_apply_callback(my_spcl, _vfob, "frq_chn_mode")
b_band.append(rs)

val = _vfob.chan_num + 1
rs = RadioSetting("lower.vfob.chan_num", "Initial Chan",
RadioSettingValueInteger(1, 128, val))
rs.set_apply_callback(my_adjraw, _vfob, "chan_num", -1)
b_band.append(rs)

val = _vfob.rxfreq / 100000.0
if (val < 400.0 or val > 480.0):
val = 446.0 # UHF calling
rs = RadioSetting("lower.vfob.rxfreq ", "Default Recv Freq (MHz)",
RadioSettingValueFloat(400.0, 480.0, val, 0.001, 5))
rs.set_apply_callback(my_dbl2raw, _vfob, "rxfreq")
b_band.append(rs)

tmp = my_tone_strn(_vfob, "is_rxdigtone", "rxdtcs_pol", "rx_tone")
rs = RadioSetting("rx_tone", "Default Recv CTCSS (Htz)",
RadioSettingValueList(LIST_CTCSS, tmp))
rs.set_apply_callback(my_set_tone, _vfob, "is_rxdigtone",
"rxdtcs_pol", "rx_tone")
b_band.append(rs)

rx = RadioSettingValueList(LIST_RECVMODE, LIST_RECVMODE[_vfob.rx_mode])
rs = RadioSetting("lower.vfob.rx_mode", "Default Recv Mode", rx)
b_band.append(rs)

tmp = my_tone_strn(_vfob, "is_txdigtone", "txdtcs_pol", "tx_tone")
rs = RadioSetting("tx_tone", "Default Xmit CTCSS (Htz)",
RadioSettingValueList(LIST_CTCSS, tmp))
rs.set_apply_callback(my_set_tone, _vfob, "is_txdigtone",
"txdtcs_pol", "tx_tone")
b_band.append(rs)

rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfob.launch_sig])
rs = RadioSetting("lower.vfob.launch_sig", "Launch Signaling", rx)
b_band.append(rs)

rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfob.tx_end_sig])
rs = RadioSetting("lower.vfob.tx_end_sig", "Xmit End Signaling", rx)
b_band.append(rs)

rx = RadioSettingValueList(LIST_BW, LIST_BW[_vfob.fm_bw])
rs = RadioSetting("lower.vfob.fm_bw", "Wide/Narrow Band", rx)
b_band.append(rs)

rs = RadioSetting("lower.vfob.cmp_nder", "Compandor",
RadioSettingValueBoolean(bool(_vfob.cmp_nder)))
b_band.append(rs)

rs = RadioSetting("lower.vfob.scrm_blr", "Scrambler",
RadioSettingValueBoolean(bool(_vfob.scrm_blr)))
b_band.append(rs)

rx = RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[_vfob.shift])
rs = RadioSetting("lower.vfob.shift", "Xmit Shift", rx)
b_band.append(rs)

val = _vfob.offset / 100000.0
rs = RadioSetting("lower.vfob.offset", "Xmit Offset (MHz)",
RadioSettingValueFloat(0, 100.0, val, 0.001, 3))
rs.set_apply_callback(my_dbl2raw, _vfob, "offset", 0)
b_band.append(rs)

tmp = str(_vfob.step / 100.0)
rs = RadioSetting("step", "Freq step (KHz)",
RadioSettingValueList(LIST_STEPS, tmp))
rs.set_apply_callback(my_word2raw, _vfob, "step", 100)
b_band.append(rs)

# BJ-318 lower band squelch
if self.MODEL == "BJ-318":
if _vfob.sql == 0xFF:
val_l = 0x04 # setting default squelch to 04
else:
val_l = _vfob.sql
sql_b = RadioSetting("lower.vfob.sql", "Squelch",
RadioSettingValueInteger(0, 9, val_l))
b_band.append(sql_b)

# BJ-318 lower band volume
if self.MODEL == "BJ-318":
bvolume_l = RadioSetting("lower.vfob.bvol",
"Volume", RadioSettingValueInteger(
0, 15, _vfob.bvol))
b_band.append(bvolume_l)

# BJ-318 Lower Screen Color
if self.MODEL == "BJ-318":
rs_l = RadioSettingValueList(LIST_COLOR318,
LIST_COLOR318[_lims.dn_scr_color])
dn_scr_color = RadioSetting("hello_lims.dn_scr_color",
"Screen Color", rs_l)
b_band.append(dn_scr_color)

# BJ-318 lower band power
if self.MODEL == "BJ-318":
val_l = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High
rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val_l])
powera = RadioSetting("lower.vfob.bpower", "Power", rx)
b_band.append(powera)

# PowerOn & Freq Limits Settings
def chars2str(cary, knt):
"""Convert raw memory char array to a string: NOT a callback."""
stx = ""
for char in cary[:knt]:
stx += chr(char)
return stx

def my_str2ary(setting, obj, atrba, atrbc):
"""Callback: convert 7-char string to char array with count."""
ary = ""
knt = 7
for j in range(6, -1, -1): # Strip trailing spaces
if str(setting.value)[j] == "" or str(setting.value)[j] == " ":
knt = knt - 1
else:
break
for j in range(0, 7, 1):
if j < knt:
ary += str(setting.value)[j]
else:
ary += chr(0xFF)
setattr(obj, atrba, ary)
setattr(obj, atrbc, knt)
return

# not used in BJ-318 startup screen
if self.MODEL != "BJ-318":
tmp = chars2str(_lims.hello1, _lims.hello1_cnt)
rs = RadioSetting("hello_lims.hello1", "Power-On Message 1",
RadioSettingValueString(0, 7, tmp))
rs.set_apply_callback(my_str2ary, _lims, "hello1", "hello1_cnt")
lims.append(rs)

# not used in BJ-318 startup screen
if self.MODEL != "BJ-318":
tmp = chars2str(_lims.hello2, _lims.hello2_cnt)
rs = RadioSetting("hello_lims.hello2", "Power-On Message 2",
RadioSettingValueString(0, 7, tmp))
rs.set_apply_callback(my_str2ary, _lims, "hello2", "hello2_cnt")
lims.append(rs)

# VALID_BANDS = [(136000000, 176000000),400000000, 480000000)]

lval = _lims.vhf_low / 100000.0
uval = _lims.vhf_high / 100000.0
if lval >= uval:
lval = 144.0
uval = 158.0

rs = RadioSetting("hello_lims.vhf_low", "Lower VHF Band Limit (MHz)",
RadioSettingValueFloat(136.0, 176.0, lval, 0.001, 3))
rs.set_apply_callback(my_dbl2raw, _lims, "vhf_low")
lims.append(rs)

rs = RadioSetting("hello_lims.vhf_high", "Upper VHF Band Limit (MHz)",
RadioSettingValueFloat(136.0, 176.0, uval, 0.001, 3))
rs.set_apply_callback(my_dbl2raw, _lims, "vhf_high")
lims.append(rs)

lval = _lims.uhf_low / 100000.0
uval = _lims.uhf_high / 100000.0
if lval >= uval:
lval = 420.0
uval = 470.0

rs = RadioSetting("hello_lims.uhf_low", "Lower UHF Band Limit (MHz)",
RadioSettingValueFloat(400.0, 480.0, lval, 0.001, 3))
rs.set_apply_callback(my_dbl2raw, _lims, "uhf_low")
lims.append(rs)

rs = RadioSetting("hello_lims.uhf_high", "Upper UHF Band Limit (MHz)",
RadioSettingValueFloat(400.0, 480.0, uval, 0.001, 3))
rs.set_apply_callback(my_dbl2raw, _lims, "uhf_high")
lims.append(rs)

# Codes and DTMF Groups Settings

def make_dtmf(ary, knt):
"""Generate the DTMF code 1-8, NOT a callback."""
tmp = ""
if knt > 0 and knt != 0xff:
for val in ary[:knt]:
if val > 0 and val <= 9:
tmp += chr(val + 48)
elif val == 0x0a:
tmp += "0"
elif val == 0x0d:
tmp += "A"
elif val == 0x0e:
tmp += "B"
elif val == 0x0f:
tmp += "C"
elif val == 0x00:
tmp += "D"
elif val == 0x0b:
tmp += "*"
elif val == 0x0c:
tmp += "#"
else:
msg = ("Invalid Character. Must be: 0-9,A,B,C,D,*,#")
raise InvalidValueError(msg)
return tmp

def my_dtmf2raw(setting, obj, atrba, atrbc, syz=7):
"""Callback: DTMF Code; sends 5 or 7-byte string."""
draw = []
knt = syz
for j in range(syz - 1, -1, -1): # Strip trailing spaces
if str(setting.value)[j] == "" or str(setting.value)[j] == " ":
knt = knt - 1
else:
break
for j in range(0, syz):
bx = str(setting.value)[j]
obx = ord(bx)
dig = 0x0ff
if j < knt and knt > 0: # (Else) is pads
if bx == "0":
dig = 0x0a
elif bx == "A":
dig = 0x0d
elif bx == "B":
dig = 0x0e
elif bx == "C":
dig = 0x0f
elif bx == "D":
dig = 0x00
elif bx == "*":
dig = 0x0b
elif bx == "#":
dig = 0x0c
elif obx >= 49 and obx <= 57:
dig = obx - 48
else:
msg = ("Must be: 0-9,A,B,C,D,*,#")
raise InvalidValueError(msg)
# - End if/elif/else for bx
# - End if J<=knt
draw.append(dig) # Generate string of bytes
# - End for j
setattr(obj, atrba, draw)
setattr(obj, atrbc, knt)
return

tmp = make_dtmf(_codes.native_id_code, _codes.native_id_cnt)
rs = RadioSetting("codes.native_id_code", "Native ID Code",
RadioSettingValueString(0, 7, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "native_id_code",
"native_id_cnt", 7)
codes.append(rs)

tmp = make_dtmf(_codes.master_id_code, _codes.master_id_cnt)
rs = RadioSetting("codes.master_id_code", "Master Control ID Code",
RadioSettingValueString(0, 7, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "master_id_code",
"master_id_cnt", 7)
codes.append(rs)

tmp = make_dtmf(_codes.alarm_code, _codes.alarm_cnt)
rs = RadioSetting("codes.alarm_code", "Alarm Code",
RadioSettingValueString(0, 5, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "alarm_code",
"alarm_cnt", 5)
codes.append(rs)

tmp = make_dtmf(_codes.id_disp_code, _codes.id_disp_cnt)
rs = RadioSetting("codes.id_disp_code", "Identify Display Code",
RadioSettingValueString(0, 5, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "id_disp_code",
"id_disp_cnt", 5)
codes.append(rs)

tmp = make_dtmf(_codes.revive_code, _codes.revive_cnt)
rs = RadioSetting("codes.revive_code", "Revive Code",
RadioSettingValueString(0, 5, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "revive_code",
"revive_cnt", 5)
codes.append(rs)

tmp = make_dtmf(_codes.stun_code, _codes.stun_cnt)
rs = RadioSetting("codes.stun_code", "Remote Stun Code",
RadioSettingValueString(0, 5, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "stun_code",
"stun_cnt", 5)
codes.append(rs)

tmp = make_dtmf(_codes.kill_code, _codes.kill_cnt)
rs = RadioSetting("codes.kill_code", "Remote KILL Code",
RadioSettingValueString(0, 5, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "kill_code",
"kill_cnt", 5)
codes.append(rs)

tmp = make_dtmf(_codes.monitor_code, _codes.monitor_cnt)
rs = RadioSetting("codes.monitor_code", "Monitor Code",
RadioSettingValueString(0, 5, tmp))
rs.set_apply_callback(my_dtmf2raw, _codes, "monitor_code",
"monitor_cnt", 5)
codes.append(rs)

val = _codes.state_now
if val > 2:
val = 0

rx = RadioSettingValueList(LIST_STATE, LIST_STATE[val])
rs = RadioSetting("codes.state_now", "Current State", rx)
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf1, _dtmf.dtmf1_cnt)
rs = RadioSetting("dtmf_tab.dtmf1", "DTMF1 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf1", "dtmf1_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf2, _dtmf.dtmf2_cnt)
rs = RadioSetting("dtmf_tab.dtmf2", "DTMF2 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf2", "dtmf2_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf3, _dtmf.dtmf3_cnt)
rs = RadioSetting("dtmf_tab.dtmf3", "DTMF3 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf3", "dtmf3_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf4, _dtmf.dtmf4_cnt)
rs = RadioSetting("dtmf_tab.dtmf4", "DTMF4 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf4", "dtmf4_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf5, _dtmf.dtmf5_cnt)
rs = RadioSetting("dtmf_tab.dtmf5", "DTMF5 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf5", "dtmf5_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf6, _dtmf.dtmf6_cnt)
rs = RadioSetting("dtmf_tab.dtmf6", "DTMF6 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf6", "dtmf6_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf7, _dtmf.dtmf7_cnt)
rs = RadioSetting("dtmf_tab.dtmf7", "DTMF7 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf7", "dtmf7_cnt")
codes.append(rs)

dtm = make_dtmf(_dtmf.dtmf8, _dtmf.dtmf8_cnt)
rs = RadioSetting("dtmf_tab.dtmf8", "DTMF8 String",
RadioSettingValueString(0, 7, dtm))
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf8", "dtmf8_cnt")
codes.append(rs)

return group # END get_settings()

def set_settings(self, settings):
_settings = self._memobj.settings
_mem = self._memobj
for element in settings:
if not isinstance(element, RadioSetting):
self.set_settings(element)
continue
else:
try:
name = element.get_name()
if "." in name:
bits = name.split(".")
obj = self._memobj
for bit in bits[:-1]:
if "/" in bit:
bit, index = bit.split("/", 1)
index = int(index)
obj = getattr(obj, bit)[index]
else:
obj = getattr(obj, bit)
setting = bits[-1]
else:
obj = _settings
setting = element.get_name()

if element.has_apply_callback():
LOG.debug("Using apply callback")
element.run_apply_callback()
elif element.value.get_mutable():
LOG.debug("Setting %s = %s" % (setting, element.value))
setattr(obj, setting, element.value)
except Exception:
LOG.debug(element.get_name())
raise

@classmethod
def match_model(cls, filedata, filename):
match_size = False
match_model = False

# Testing the file data size
if len(filedata) == MEM_SIZE + 8:
match_size = True

# Testing the firmware model fingerprint
match_model = model_match(cls, filedata)

if match_size and match_model:
return True
else:
return False


class LT725UVUpper(LT725UV):
VARIANT = "Upper"
_vfo = "upper"


class LT725UVLower(LT725UV):
VARIANT = "Lower"
_vfo = "lower"


class Zastone(chirp_common.Alias):
"""Declare BJ-218 alias for Zastone BJ-218."""
VENDOR = "Zastone"
MODEL = "BJ-218"


class Hesenate(chirp_common.Alias):
"""Declare BJ-218 alias for Hesenate BJ-218."""
VENDOR = "Hesenate"
MODEL = "BJ-218"


class Baojie218Upper(LT725UVUpper):
VENDOR = "Baojie"
MODEL = "BJ-218"


class Baojie218Lower(LT725UVLower):
VENDOR = "Baojie"
MODEL = "BJ-218"


@directory.register
class Baojie218(LT725UV):
"""Baojie BJ-218"""
VENDOR = "Baojie"
MODEL = "BJ-218"
ALIASES = [Zastone, Hesenate, ]

def get_sub_devices(self):
return [Baojie218Upper(self._mmap), Baojie218Lower(self._mmap)]


class Baojie318Upper(LT725UVUpper):
VENDOR = "Baojie"
MODEL = "BJ-318"


class Baojie318Lower(LT725UVLower):
VENDOR = "Baojie"
MODEL = "BJ-318"


@directory.register
class Baojie318(LT725UV):
"""Baojie BJ-318"""
VENDOR = "Baojie"
MODEL = "BJ-318"

def get_sub_devices(self):
return [Baojie318Upper(self._mmap), Baojie318Lower(self._mmap)]
(4-4/7)