|
# Copyright 2013 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
# This driver was derived from the:
|
|
# Quansheng TG-UV2 Utility by Mike Nix <mnix@wanm.com.au>
|
|
# (So thanks Mike!)
|
|
|
|
import struct
|
|
import logging
|
|
import serial
|
|
from chirp import chirp_common, directory, bitwise, memmap, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettingValueFloat, RadioSettingValueMap, RadioSettings
|
|
from textwrap import dedent
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
mem_format = """
|
|
struct memory {
|
|
bbcd freq[4];
|
|
bbcd offset[4];
|
|
u8 rxtone;
|
|
u8 txtone;
|
|
u8 unknown1:2,
|
|
txtmode:2,
|
|
unknown2:2,
|
|
rxtmode:2;
|
|
u8 duplex;
|
|
u8 unknown3:3,
|
|
isnarrow:1,
|
|
unknown4:2,
|
|
not_scramble:1,
|
|
not_revfreq:1;
|
|
u8 flag3;
|
|
u8 step;
|
|
u8 power;
|
|
};
|
|
|
|
struct bandflag {
|
|
u8 scanadd:1,
|
|
unknown1:3,
|
|
band:4;
|
|
};
|
|
|
|
struct tguv2_config {
|
|
u8 unknown1;
|
|
u8 squelch;
|
|
u8 time_out_timer;
|
|
u8 priority_channel;
|
|
|
|
u8 unknown2:7,
|
|
keyunlocked:1;
|
|
u8 busy_lockout;
|
|
u8 vox;
|
|
u8 unknown3;
|
|
|
|
u8 beep_tone_disabled;
|
|
u8 display;
|
|
u8 step;
|
|
u8 unknown4;
|
|
|
|
u8 unknown5;
|
|
u8 rxmode;
|
|
u8 unknown6:7,
|
|
not_end_tone_elim:1;
|
|
u8 vfo_mode;
|
|
};
|
|
|
|
struct vfo {
|
|
u8 current;
|
|
u8 chan;
|
|
u8 memno;
|
|
};
|
|
|
|
struct name {
|
|
u8 name[6];
|
|
u8 unknown1[10];
|
|
};
|
|
|
|
#seekto 0x0000;
|
|
char ident[32];
|
|
u8 blank[16];
|
|
|
|
struct memory channels[200];
|
|
struct memory bands[5];
|
|
|
|
#seekto 0x0D30;
|
|
struct bandflag bandflags[200];
|
|
|
|
#seekto 0x0E30;
|
|
struct tguv2_config settings;
|
|
struct vfo vfos[2];
|
|
u8 unk5;
|
|
u8 reserved2[9];
|
|
u8 band_restrict;
|
|
u8 txen350390;
|
|
|
|
#seekto 0x0F30;
|
|
struct name names[200];
|
|
|
|
"""
|
|
|
|
|
|
def do_ident(radio):
|
|
radio.pipe.timeout = 3
|
|
radio.pipe.stopbits = serial.STOPBITS_TWO
|
|
radio.pipe.write("\x02PnOGdAM")
|
|
for x in xrange(10):
|
|
ack = radio.pipe.read(1)
|
|
if ack == '\x06':
|
|
break
|
|
else:
|
|
raise errors.RadioError("Radio did not ack programming mode")
|
|
radio.pipe.write("\x40\x02")
|
|
ident = radio.pipe.read(8)
|
|
LOG.debug(util.hexprint(ident))
|
|
if not ident.startswith('P5555'):
|
|
raise errors.RadioError("Unsupported model")
|
|
radio.pipe.write("\x06")
|
|
ack = radio.pipe.read(1)
|
|
if ack != "\x06":
|
|
raise errors.RadioError("Radio did not ack ident")
|
|
|
|
|
|
def do_status(radio, direction, addr):
|
|
status = chirp_common.Status()
|
|
status.msg = "Cloning %s radio" % direction
|
|
status.cur = addr
|
|
status.max = 0x2000
|
|
radio.status_fn(status)
|
|
|
|
|
|
def do_download(radio):
|
|
do_ident(radio)
|
|
data = "TG-UV2+ Radio Program Data v1.0\x00"
|
|
data += ("\x00" * 16)
|
|
|
|
firstack = None
|
|
for i in range(0, 0x2000, 8):
|
|
frame = struct.pack(">cHB", "R", i, 8)
|
|
radio.pipe.write(frame)
|
|
result = radio.pipe.read(12)
|
|
if not (result[0] == "W" and frame[1:4] == result[1:4]):
|
|
LOG.debug(util.hexprint(result))
|
|
raise errors.RadioError("Invalid response for address 0x%04x" % i)
|
|
radio.pipe.write("\x06")
|
|
ack = radio.pipe.read(1)
|
|
if not firstack:
|
|
firstack = ack
|
|
else:
|
|
if not ack == firstack:
|
|
LOG.debug("first ack: %s ack received: %s",
|
|
util.hexprint(firstack), util.hexprint(ack))
|
|
raise errors.RadioError("Unexpected response")
|
|
data += result[4:]
|
|
do_status(radio, "from", i)
|
|
|
|
return memmap.MemoryMap(data)
|
|
|
|
|
|
def do_upload(radio):
|
|
do_ident(radio)
|
|
data = radio._mmap[0x0030:]
|
|
|
|
for i in range(0, 0x2000, 8):
|
|
frame = struct.pack(">cHB", "W", i, 8)
|
|
frame += data[i:i + 8]
|
|
radio.pipe.write(frame)
|
|
ack = radio.pipe.read(1)
|
|
if ack != "\x06":
|
|
LOG.debug("Radio NAK'd block at address 0x%04x" % i)
|
|
raise errors.RadioError(
|
|
"Radio NAK'd block at address 0x%04x" % i)
|
|
LOG.debug("Radio ACK'd block at address 0x%04x" % i)
|
|
do_status(radio, "to", i)
|
|
|
|
DUPLEX = ["", "+", "-"]
|
|
TGUV2P_STEPS = [5, 6.25, 10, 12.5, 15, 20, 25, 30, 50, 100]
|
|
CHARSET = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_|* +-"
|
|
POWER_LEVELS = [chirp_common.PowerLevel("High", watts=10),
|
|
chirp_common.PowerLevel("Med", watts=5),
|
|
chirp_common.PowerLevel("Low", watts=1)]
|
|
POWER_LEVELS_STR = ["High", "Med", "Low"]
|
|
VALID_BANDS = [(88000000, 108000000),
|
|
(136000000, 174000000),
|
|
(350000000, 390000000),
|
|
(400000000, 470000000),
|
|
(470000000, 520000000)]
|
|
|
|
|
|
@directory.register
|
|
class QuanshengTGUV2P(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
"""Quansheng TG-UV2+"""
|
|
VENDOR = "Quansheng"
|
|
MODEL = "TG-UV2+"
|
|
BAUD_RATE = 9600
|
|
|
|
_memsize = 0x2000
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = \
|
|
('Experimental version for TG-UV2/2+ radios '
|
|
'Proceed at your own risk!')
|
|
rp.pre_download = _(dedent("""\
|
|
1. Turn radio off.
|
|
2. Connect cable to mic/spkr connector.
|
|
3. Make sure connector is firmly connected.
|
|
4. Turn radio on.
|
|
5. Ensure that the radio is tuned to channel with no activity.
|
|
6. Click OK to download image from device."""))
|
|
rp.pre_upload = _(dedent("""\
|
|
1. Turn radio off.
|
|
2. Connect cable to mic/spkr connector.
|
|
3. Make sure connector is firmly connected.
|
|
4. Turn radio on.
|
|
5. Ensure that the radio is tuned to channel with no activity.
|
|
6. Click OK to upload image to device."""))
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_cross = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_dtcs_polarity = True
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
rf.valid_duplexes = DUPLEX
|
|
rf.can_odd_split = False
|
|
rf.valid_skips = ["", "S"]
|
|
rf.valid_characters = CHARSET
|
|
rf.valid_name_length = 6
|
|
rf.valid_tuning_steps = TGUV2P_STEPS
|
|
rf.valid_bands = VALID_BANDS
|
|
|
|
rf.valid_modes = ["FM", "NFM"]
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
rf.has_ctone = True
|
|
rf.has_bank = False
|
|
rf.has_tuning_step = True
|
|
rf.memory_bounds = (0, 199)
|
|
return rf
|
|
|
|
def sync_in(self):
|
|
try:
|
|
self._mmap = do_download(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
try:
|
|
do_upload(self)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(mem_format, self._mmap)
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.channels[number])
|
|
|
|
def _decode_tone(self, _mem, which):
|
|
def _get(field):
|
|
return getattr(_mem, "%s%s" % (which, field))
|
|
|
|
value = _get('tone')
|
|
tmode = _get('tmode')
|
|
|
|
if (value <= 104) and (tmode <= 3):
|
|
if tmode == 0:
|
|
mode = val = pol = None
|
|
elif tmode == 1:
|
|
mode = 'Tone'
|
|
val = chirp_common.TONES[value]
|
|
pol = None
|
|
else:
|
|
mode = 'DTCS'
|
|
val = chirp_common.DTCS_CODES[value]
|
|
pol = "N" if (tmode == 2) else "R"
|
|
else:
|
|
mode = val = pol = None
|
|
|
|
return mode, val, pol
|
|
|
|
def _encode_tone(self, _mem, which, mode, val, pol):
|
|
def _set(field, value):
|
|
setattr(_mem, "%s%s" % (which, field), value)
|
|
|
|
if (mode == "Tone"):
|
|
_set("tone", chirp_common.TONES.index(val))
|
|
_set("tmode", 0x01)
|
|
elif mode == "DTCS":
|
|
_set("tone", chirp_common.DTCS_CODES.index(val))
|
|
if pol == "N":
|
|
_set("tmode", 0x02)
|
|
else:
|
|
_set("tmode", 0x03)
|
|
else:
|
|
_set("tone", 0)
|
|
_set("tmode", 0)
|
|
|
|
def _get_memobjs(self, number):
|
|
if isinstance(number, str):
|
|
return (getattr(self._memobj, number.lower()), None)
|
|
|
|
else:
|
|
return (self._memobj.channels[number],
|
|
self._memobj.bandflags[number],
|
|
self._memobj.names[number].name)
|
|
|
|
def get_memory(self, number):
|
|
_mem, _bf, _nam = self._get_memobjs(number)
|
|
mem = chirp_common.Memory()
|
|
if isinstance(number, str):
|
|
mem.extd_number = number
|
|
else:
|
|
mem.number = number
|
|
|
|
if (_mem.freq.get_raw()[0] == "\xFF") or (_bf.band == "\x0F"):
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.freq) * 10
|
|
|
|
if _mem.offset.get_raw()[0] == "\xFF":
|
|
mem.offset = 0
|
|
else:
|
|
mem.offset = int(_mem.offset) * 10
|
|
|
|
chirp_common.split_tone_decode(
|
|
mem,
|
|
self._decode_tone(_mem, "tx"),
|
|
self._decode_tone(_mem, "rx"))
|
|
|
|
if 'step' in _mem and _mem.step > len(TGUV2P_STEPS):
|
|
_mem.step = 0x00
|
|
mem.tuning_step = TGUV2P_STEPS[_mem.step]
|
|
mem.duplex = DUPLEX[_mem.duplex]
|
|
mem.mode = _mem.isnarrow and "NFM" or "FM"
|
|
mem.skip = "" if bool(_bf.scanadd) else "S"
|
|
mem.power = POWER_LEVELS[_mem.power]
|
|
|
|
if _nam:
|
|
for char in _nam:
|
|
try:
|
|
mem.name += CHARSET[char]
|
|
except IndexError:
|
|
break
|
|
mem.name = mem.name.rstrip()
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSetting("not_scramble", "(not)SCRAMBLE",
|
|
RadioSettingValueBoolean(_mem.not_scramble))
|
|
mem.extra.append(rs)
|
|
|
|
rs = RadioSetting("not_revfreq", "(not)Reverse Duplex",
|
|
RadioSettingValueBoolean(_mem.not_revfreq))
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
_mem, _bf, _nam = self._get_memobjs(mem.number)
|
|
|
|
_bf.set_raw("\xFF")
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\xFF" * 16)
|
|
return
|
|
|
|
_mem.set_raw("\x00" * 12 + "\xFF" * 2 + "\x00"*2)
|
|
|
|
_bf.scanadd = int(mem.skip != "S")
|
|
_bf.band = 0x0F
|
|
for idx, ele in enumerate(VALID_BANDS):
|
|
if mem.freq >= ele[0] and mem.freq <= ele[1]:
|
|
_bf.band = idx
|
|
|
|
_mem.freq = mem.freq / 10
|
|
_mem.offset = mem.offset / 10
|
|
|
|
tx, rx = chirp_common.split_tone_encode(mem)
|
|
self._encode_tone(_mem, 'tx', *tx)
|
|
self._encode_tone(_mem, 'rx', *rx)
|
|
|
|
_mem.duplex = DUPLEX.index(mem.duplex)
|
|
_mem.isnarrow = mem.mode == "NFM"
|
|
_mem.step = TGUV2P_STEPS.index(mem.tuning_step)
|
|
|
|
if mem.power is None:
|
|
_mem.power = 0
|
|
else:
|
|
_mem.power = POWER_LEVELS.index(mem.power)
|
|
|
|
if _nam:
|
|
for i in range(0, 6):
|
|
try:
|
|
_nam[i] = CHARSET.index(mem.name[i])
|
|
except IndexError:
|
|
_nam[i] = 0xFF
|
|
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def get_settings(self):
|
|
_settings = self._memobj.settings
|
|
_vfoa = self._memobj.vfos[0]
|
|
_vfob = self._memobj.vfos[1]
|
|
_bandsettings = self._memobj.bands
|
|
|
|
cfg_grp = RadioSettingGroup("cfg_grp", "Configuration")
|
|
vfoa_grp = RadioSettingGroup(
|
|
"vfoa_grp", "VFO A Settings\n (Current Status, Read Only)")
|
|
vfob_grp = RadioSettingGroup(
|
|
"vfob_grp", "VFO B Settings\n (Current Status, Read Only)")
|
|
|
|
group = RadioSettings(cfg_grp, vfoa_grp, vfob_grp)
|
|
#
|
|
# Configuration Settings
|
|
#
|
|
|
|
# TX time out timer:
|
|
options = ["Off"] + ["%s min" % x for x in range(1, 10)]
|
|
rs = RadioSetting("time_out_timer", "TX Time Out Timer",
|
|
RadioSettingValueList(
|
|
options, options[_settings.time_out_timer]))
|
|
cfg_grp.append(rs)
|
|
|
|
# Display mode
|
|
options = ["Frequency", "Channel", "Name"]
|
|
rs = RadioSetting("display", "Channel Display Mode",
|
|
RadioSettingValueList(
|
|
options, options[_settings.display]))
|
|
cfg_grp.append(rs)
|
|
|
|
# Squelch level
|
|
rs = RadioSetting("squelch", "Squelch Level",
|
|
RadioSettingValueInteger(0, 9, _settings.squelch))
|
|
cfg_grp.append(rs)
|
|
|
|
# Vox level
|
|
mem_vals = range(10)
|
|
user_options = [str(x) for x in mem_vals]
|
|
user_options[0] = "Off"
|
|
options_map = zip(user_options, mem_vals)
|
|
|
|
rs = RadioSetting("vox", "VOX Level",
|
|
RadioSettingValueMap(options_map, _settings.vox))
|
|
cfg_grp.append(rs)
|
|
|
|
# Keypad beep
|
|
rs = RadioSetting("beep_tone_disabled", "Beep Prompt",
|
|
RadioSettingValueBoolean(
|
|
not _settings.beep_tone_disabled))
|
|
cfg_grp.append(rs)
|
|
|
|
# Dual watch/crossband
|
|
options = ["Dual Watch", "CrossBand", "Normal"]
|
|
if _settings.rxmode >= 2:
|
|
_rxmode = 2
|
|
else:
|
|
_rxmode = _settings.rxmode
|
|
rs = RadioSetting("rxmode", "Dual Watch/CrossBand Monitor",
|
|
RadioSettingValueList(
|
|
options, options[_rxmode]))
|
|
cfg_grp.append(rs)
|
|
|
|
# Busy chanel lock
|
|
rs = RadioSetting("busy_lockout", "Busy Channel Lock",
|
|
RadioSettingValueBoolean(
|
|
not _settings.busy_lockout))
|
|
cfg_grp.append(rs)
|
|
|
|
# Keypad lock
|
|
rs = RadioSetting("keyunlocked", "Keypad Lock",
|
|
RadioSettingValueBoolean(
|
|
not _settings.keyunlocked))
|
|
cfg_grp.append(rs)
|
|
|
|
# Priority channel
|
|
mem_vals = range(200)
|
|
user_options = [str(x) for x in mem_vals]
|
|
mem_vals.insert(0, 0xFF)
|
|
user_options.insert(0, "Not Set")
|
|
options_map = zip(user_options, mem_vals)
|
|
|
|
rs = RadioSetting("priority_channel", "Priority Channel",
|
|
RadioSettingValueMap(options_map,
|
|
_settings.priority_channel))
|
|
cfg_grp.append(rs)
|
|
|
|
# Step
|
|
mem_vals = range(0, len(TGUV2P_STEPS))
|
|
mem_vals.append(0xFF)
|
|
user_options = [(str(x) + " kHz") for x in TGUV2P_STEPS]
|
|
user_options.append("Unknown")
|
|
options_map = zip(user_options, mem_vals)
|
|
|
|
rs = RadioSetting("step", "Current (VFO?) step size",
|
|
RadioSettingValueMap(options_map, _settings.step))
|
|
cfg_grp.append(rs)
|
|
|
|
# End (Tail) tone elimination
|
|
mem_vals = [0, 1]
|
|
user_options = ["Tone Elimination On", "Tone Elimination Off"]
|
|
options_map = zip(user_options, mem_vals)
|
|
|
|
rs = RadioSetting("not_end_tone_elim", "Tx End Tone Elimination",
|
|
RadioSettingValueMap(options_map,
|
|
_settings.not_end_tone_elim))
|
|
cfg_grp.append(rs)
|
|
|
|
# VFO mode
|
|
|
|
if _settings.vfo_mode >= 1:
|
|
_vfo_mode = 0xFF
|
|
else:
|
|
_vfo_mode = _settings.vfo_mode
|
|
mem_vals = [0xFF, 0]
|
|
user_options = ["VFO Mode Enabled", "VFO Mode Disabled"]
|
|
options_map = zip(user_options, mem_vals)
|
|
|
|
rs = RadioSetting("vfo_mode", "VFO (CH only) mode",
|
|
RadioSettingValueMap(options_map, _vfo_mode))
|
|
cfg_grp.append(rs)
|
|
|
|
#
|
|
# VFO Settings
|
|
#
|
|
|
|
vfo_groups = [vfoa_grp, vfob_grp]
|
|
vfo_mem = [_vfoa, _vfob]
|
|
vfo_lower = ["vfoa", "vfob"]
|
|
vfo_upper = ["VFOA", "VFOB"]
|
|
|
|
for idx, vfo_group in enumerate(vfo_groups):
|
|
|
|
options = ["Channel", "Frequency"]
|
|
tempvar = 0 if (vfo_mem[idx].current < 200) else 1
|
|
rs = RadioSetting(vfo_lower[idx] + "_mode", vfo_upper[idx]+" Mode",
|
|
RadioSettingValueList(
|
|
options, options[tempvar]))
|
|
vfo_group.append(rs)
|
|
|
|
if tempvar == 0:
|
|
rs = RadioSetting(vfo_lower[idx] + "_ch",
|
|
vfo_upper[idx] + " Channel",
|
|
RadioSettingValueInteger(
|
|
0, 199, vfo_mem[idx].current))
|
|
vfo_group.append(rs)
|
|
else:
|
|
band_num = vfo_mem[idx].current - 200
|
|
freq = int(_bandsettings[band_num].freq) * 10
|
|
offset = int(_bandsettings[band_num].offset) * 10
|
|
txtmode = _bandsettings[band_num].txtmode
|
|
rxtmode = _bandsettings[band_num].rxtmode
|
|
|
|
rs = RadioSetting(vfo_lower[idx] + "_freq",
|
|
vfo_upper[idx] + " Frequency",
|
|
RadioSettingValueFloat(
|
|
0.0, 520.0, freq / 1000000.0,
|
|
precision=6))
|
|
vfo_group.append(rs)
|
|
|
|
if offset > 70e6:
|
|
offset = 0
|
|
rs = RadioSetting(vfo_lower[idx] + "_offset",
|
|
vfo_upper[idx] + " Offset",
|
|
RadioSettingValueFloat(
|
|
0.0, 69.995, offset / 100000.0,
|
|
resolution=0.005))
|
|
vfo_group.append(rs)
|
|
|
|
rs = RadioSetting(vfo_lower[idx] + "_duplex",
|
|
vfo_upper[idx] + " Shift",
|
|
RadioSettingValueList(
|
|
DUPLEX,
|
|
DUPLEX[_bandsettings[band_num].duplex]))
|
|
vfo_group.append(rs)
|
|
|
|
rs = RadioSetting(
|
|
vfo_lower[idx] + "_step",
|
|
vfo_upper[idx] + " Step",
|
|
RadioSettingValueFloat(
|
|
0.0, 1000.0,
|
|
TGUV2P_STEPS[_bandsettings[band_num].step],
|
|
resolution=0.25))
|
|
vfo_group.append(rs)
|
|
|
|
rs = RadioSetting(
|
|
vfo_lower[idx] + "_pwr",
|
|
vfo_upper[idx] + " Power",
|
|
RadioSettingValueList(
|
|
POWER_LEVELS_STR,
|
|
POWER_LEVELS_STR[_bandsettings[band_num].power]))
|
|
vfo_group.append(rs)
|
|
|
|
options = ["None", "Tone", "DTCS-N", "DTCS-I"]
|
|
rs = RadioSetting(vfo_lower[idx] + "_ttmode",
|
|
vfo_upper[idx]+" TX tone mode",
|
|
RadioSettingValueList(
|
|
options, options[txtmode]))
|
|
vfo_group.append(rs)
|
|
if txtmode == 1:
|
|
rs = RadioSetting(
|
|
vfo_lower[idx] + "_ttone",
|
|
vfo_upper[idx] + " TX tone",
|
|
RadioSettingValueFloat(
|
|
0.0, 1000.0,
|
|
chirp_common.TONES[_bandsettings[band_num].txtone],
|
|
resolution=0.1))
|
|
vfo_group.append(rs)
|
|
elif txtmode >= 2:
|
|
txtone = _bandsettings[band_num].txtone
|
|
rs = RadioSetting(
|
|
vfo_lower[idx] + "_tdtcs",
|
|
vfo_upper[idx] + " TX DTCS",
|
|
RadioSettingValueInteger(
|
|
0, 1000, chirp_common.DTCS_CODES[txtone]))
|
|
vfo_group.append(rs)
|
|
|
|
options = ["None", "Tone", "DTCS-N", "DTCS-I"]
|
|
rs = RadioSetting(vfo_lower[idx] + "_rtmode",
|
|
vfo_upper[idx] + " RX tone mode",
|
|
RadioSettingValueList(options,
|
|
options[rxtmode]))
|
|
vfo_group.append(rs)
|
|
|
|
if rxtmode == 1:
|
|
rs = RadioSetting(
|
|
vfo_lower[idx] + "_rtone",
|
|
vfo_upper[idx] + " RX tone",
|
|
RadioSettingValueFloat(
|
|
0.0, 1000.0,
|
|
chirp_common.TONES[_bandsettings[band_num].rxtone],
|
|
resolution=0.1))
|
|
vfo_group.append(rs)
|
|
elif rxtmode >= 2:
|
|
rxtone = _bandsettings[band_num].rxtone
|
|
rs = RadioSetting(vfo_lower[idx] + "_rdtcs",
|
|
vfo_upper[idx] + " TX rTCS",
|
|
RadioSettingValueInteger(
|
|
0, 1000,
|
|
chirp_common.DTCS_CODES[rxtone]))
|
|
vfo_group.append(rs)
|
|
|
|
options = ["FM", "NFM"]
|
|
rs = RadioSetting(
|
|
vfo_lower[idx] + "_fm",
|
|
vfo_upper[idx] + " FM BW ",
|
|
RadioSettingValueList(
|
|
options, options[_bandsettings[band_num].isnarrow]))
|
|
vfo_group.append(rs)
|
|
|
|
return group
|
|
|
|
def set_settings(self, settings):
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
if "vfo" in element.get_name():
|
|
continue
|
|
elif "." in element.get_name():
|
|
bits = element.get_name().split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = self._memobj.settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("using apply callback")
|
|
element.run_apply_callback()
|
|
elif setting == "beep_tone_disabled":
|
|
setattr(obj, setting, not int(element.value))
|
|
elif setting == "busy_lockout":
|
|
setattr(obj, setting, not int(element.value))
|
|
elif setting == "keyunlocked":
|
|
setattr(obj, setting, not int(element.value))
|
|
elif element.value.get_mutable():
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
return (filedata.startswith("TG-UV2+ Radio Program Data") and
|
|
len(filedata) == (cls._memsize + 0x30))
|
