|
# -*- coding: utf-8 -*-
|
|
# Copyright 2013 Andrew Morgan <ziltro@ziltro.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import time
|
|
import os
|
|
import struct
|
|
import unittest
|
|
import logging
|
|
|
|
from chirp import chirp_common, directory, memmap
|
|
from chirp import bitwise, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueInteger, RadioSettingValueList, \
|
|
RadioSettingValueBoolean, RadioSettings
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0010;
|
|
struct {
|
|
lbcd rxfreq[4];
|
|
lbcd txfreq[4];
|
|
lbcd rxtone[2];
|
|
lbcd txtone[2];
|
|
u8 unknown3:1,
|
|
unknown2:1,
|
|
unknown1:1,
|
|
skip:1,
|
|
highpower:1,
|
|
narrow:1,
|
|
beatshift:1,
|
|
bcl:1;
|
|
u8 unknown4[3];
|
|
} memory[16];
|
|
#seekto 0x02B0;
|
|
struct {
|
|
u8 voiceprompt;
|
|
u8 voicelanguage;
|
|
u8 scan;
|
|
u8 vox;
|
|
u8 voxlevel;
|
|
u8 voxinhibitonrx;
|
|
u8 lowvolinhibittx;
|
|
u8 highvolinhibittx;
|
|
u8 alarm;
|
|
u8 fmradio;
|
|
} settings;
|
|
#seekto 0x03C0;
|
|
struct {
|
|
u8 unused:6,
|
|
batterysaver:1,
|
|
beep:1;
|
|
u8 squelchlevel;
|
|
u8 sidekeyfunction;
|
|
u8 timeouttimer;
|
|
u8 unused2[3];
|
|
u8 unused3:7,
|
|
scanmode:1;
|
|
} settings2;
|
|
"""
|
|
|
|
CMD_ACK = "\x06"
|
|
BLOCK_SIZE = 0x08
|
|
UPLOAD_BLOCKS = [range(0x0000, 0x0110, 8),
|
|
range(0x02b0, 0x02c0, 8),
|
|
range(0x0380, 0x03e0, 8)]
|
|
|
|
# TODO: Is it 1 watt?
|
|
H777_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.00),
|
|
chirp_common.PowerLevel("High", watts=5.00)]
|
|
VOICE_LIST = ["English", "Chinese"]
|
|
TIMEOUTTIMER_LIST = ["Off", "30 seconds", "60 seconds", "90 seconds",
|
|
"120 seconds", "150 seconds", "180 seconds",
|
|
"210 seconds", "240 seconds", "270 seconds",
|
|
"300 seconds"]
|
|
SCANMODE_LIST = ["Carrier", "Time"]
|
|
|
|
SETTING_LISTS = {
|
|
"voice": VOICE_LIST,
|
|
}
|
|
|
|
|
|
def _h777_enter_programming_mode(radio):
|
|
serial = radio.pipe
|
|
# increase default timeout from .25 to .5 for all serial communications
|
|
serial.timeout = 0.5
|
|
|
|
try:
|
|
serial.write("\x02")
|
|
time.sleep(0.1)
|
|
serial.write("PROGRAM")
|
|
ack = serial.read(1)
|
|
except:
|
|
raise errors.RadioError("Error communicating with radio")
|
|
|
|
if not ack:
|
|
raise errors.RadioError("No response from radio")
|
|
elif ack != CMD_ACK:
|
|
raise errors.RadioError("Radio refused to enter programming mode")
|
|
|
|
try:
|
|
serial.write("\x02")
|
|
# At least one version of the Baofeng BF-888S has a consistent
|
|
# ~0.33s delay between sending the first five bytes of the
|
|
# version data and the last three bytes. We need to raise the
|
|
# timeout so that the read doesn't finish early.
|
|
ident = serial.read(8)
|
|
except:
|
|
raise errors.RadioError("Error communicating with radio")
|
|
|
|
if not ident.startswith("P3107"):
|
|
LOG.debug(util.hexprint(ident))
|
|
raise errors.RadioError("Radio returned unknown identification string")
|
|
|
|
try:
|
|
serial.write(CMD_ACK)
|
|
ack = serial.read(1)
|
|
except:
|
|
raise errors.RadioError("Error communicating with radio")
|
|
|
|
if ack != CMD_ACK:
|
|
raise errors.RadioError("Radio refused to enter programming mode")
|
|
|
|
|
|
def _h777_exit_programming_mode(radio):
|
|
serial = radio.pipe
|
|
try:
|
|
serial.write("E")
|
|
except:
|
|
raise errors.RadioError("Radio refused to exit programming mode")
|
|
|
|
|
|
def _h777_read_block(radio, block_addr, block_size):
|
|
serial = radio.pipe
|
|
|
|
cmd = struct.pack(">cHb", 'R', block_addr, BLOCK_SIZE)
|
|
expectedresponse = "W" + cmd[1:]
|
|
LOG.debug("Reading block %04x..." % (block_addr))
|
|
|
|
try:
|
|
serial.write(cmd)
|
|
response = serial.read(4 + BLOCK_SIZE)
|
|
if response[:4] != expectedresponse:
|
|
raise Exception("Error reading block %04x." % (block_addr))
|
|
|
|
block_data = response[4:]
|
|
|
|
serial.write(CMD_ACK)
|
|
ack = serial.read(1)
|
|
except:
|
|
raise errors.RadioError("Failed to read block at %04x" % block_addr)
|
|
|
|
if ack != CMD_ACK:
|
|
raise Exception("No ACK reading block %04x." % (block_addr))
|
|
|
|
return block_data
|
|
|
|
|
|
def _h777_write_block(radio, block_addr, block_size):
|
|
serial = radio.pipe
|
|
|
|
cmd = struct.pack(">cHb", 'W', block_addr, BLOCK_SIZE)
|
|
data = radio.get_mmap()[block_addr:block_addr + 8]
|
|
|
|
LOG.debug("Writing Data:")
|
|
LOG.debug(util.hexprint(cmd + data))
|
|
|
|
try:
|
|
serial.write(cmd + data)
|
|
# Time required to write data blocks varies between individual
|
|
# radios of the Baofeng BF-888S model. The longest seen is
|
|
# ~0.31s.
|
|
if serial.read(1) != CMD_ACK:
|
|
raise Exception("No ACK")
|
|
except:
|
|
raise errors.RadioError("Failed to send block "
|
|
"to radio at %04x" % block_addr)
|
|
|
|
|
|
def do_download(radio):
|
|
LOG.debug("download")
|
|
_h777_enter_programming_mode(radio)
|
|
|
|
data = ""
|
|
|
|
status = chirp_common.Status()
|
|
status.msg = "Cloning from radio"
|
|
|
|
status.cur = 0
|
|
status.max = radio._memsize
|
|
|
|
for addr in range(0, radio._memsize, BLOCK_SIZE):
|
|
status.cur = addr + BLOCK_SIZE
|
|
radio.status_fn(status)
|
|
|
|
block = _h777_read_block(radio, addr, BLOCK_SIZE)
|
|
data += block
|
|
|
|
LOG.debug("Address: %04x" % addr)
|
|
LOG.debug(util.hexprint(block))
|
|
|
|
_h777_exit_programming_mode(radio)
|
|
|
|
return memmap.MemoryMap(data)
|
|
|
|
|
|
def do_upload(radio):
|
|
status = chirp_common.Status()
|
|
status.msg = "Uploading to radio"
|
|
|
|
_h777_enter_programming_mode(radio)
|
|
|
|
status.cur = 0
|
|
status.max = radio._memsize
|
|
|
|
for start_addr, end_addr in radio._ranges:
|
|
for addr in range(start_addr, end_addr, BLOCK_SIZE):
|
|
status.cur = addr + BLOCK_SIZE
|
|
radio.status_fn(status)
|
|
_h777_write_block(radio, addr, BLOCK_SIZE)
|
|
|
|
_h777_exit_programming_mode(radio)
|
|
|
|
|
|
class ArcshellAR5(chirp_common.Alias):
|
|
VENDOR = 'Arcshell'
|
|
MODEL = 'AR-5'
|
|
|
|
|
|
class ArcshellAR6(chirp_common.Alias):
|
|
VENDOR = 'Arcshell'
|
|
MODEL = 'AR-6'
|
|
|
|
|
|
class GV8SAlias(chirp_common.Alias):
|
|
VENDOR = 'Greaval'
|
|
MODEL = 'GV-8S'
|
|
|
|
|
|
class GV9SAlias(chirp_common.Alias):
|
|
VENDOR = 'Greaval'
|
|
MODEL = 'GV-9S'
|
|
|
|
|
|
class A8SAlias(chirp_common.Alias):
|
|
VENDOR = 'Ansoko'
|
|
MODEL = 'A-8S'
|
|
|
|
|
|
class TenwayTW325Alias(chirp_common.Alias):
|
|
VENDOR = 'Tenway'
|
|
MODEL = 'TW-325'
|
|
|
|
|
|
class RetevisH777Alias(chirp_common.Alias):
|
|
VENDOR = 'Retevis'
|
|
MODEL = 'H777'
|
|
|
|
|
|
@directory.register
|
|
class H777Radio(chirp_common.CloneModeRadio):
|
|
"""HST H-777"""
|
|
# VENDOR = "Heng Shun Tong (恒顺通)"
|
|
# MODEL = "H-777"
|
|
VENDOR = "Baofeng"
|
|
MODEL = "BF-888"
|
|
BAUD_RATE = 9600
|
|
|
|
ALIASES = [ArcshellAR5, ArcshellAR6, GV8SAlias, GV9SAlias, A8SAlias,
|
|
TenwayTW325Alias, RetevisH777Alias]
|
|
SIDEKEYFUNCTION_LIST = ["Off", "Monitor", "Transmit Power", "Alarm"]
|
|
|
|
# This code currently requires that ranges start at 0x0000
|
|
# and are continious. In the original program 0x0388 and 0x03C8
|
|
# are only written (all bytes 0xFF), not read.
|
|
# _ranges = [
|
|
# (0x0000, 0x0110),
|
|
# (0x02B0, 0x02C0),
|
|
# (0x0380, 0x03E0)
|
|
# ]
|
|
# Memory starts looping at 0x1000... But not every 0x1000.
|
|
|
|
_ranges = [
|
|
(0x0000, 0x0110),
|
|
(0x0380, 0x03E0),
|
|
(0x02B0, 0x02C0),
|
|
]
|
|
_memsize = 0x03E0
|
|
_has_fm = True
|
|
_has_sidekey = True
|
|
_has_scanmodes = True
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.valid_modes = ["NFM", "FM"] # 12.5 KHz, 25 kHz.
|
|
rf.valid_skips = ["", "S"]
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
|
rf.can_odd_split = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_ctone = True
|
|
rf.has_cross = True
|
|
rf.valid_cross_modes = [
|
|
"Tone->Tone",
|
|
"DTCS->",
|
|
"->DTCS",
|
|
"Tone->DTCS",
|
|
"DTCS->Tone",
|
|
"->Tone",
|
|
"DTCS->DTCS"]
|
|
rf.has_tuning_step = False
|
|
rf.has_bank = False
|
|
rf.has_name = False
|
|
rf.memory_bounds = (1, 16)
|
|
rf.valid_bands = [(400000000, 470000000)]
|
|
rf.valid_power_levels = H777_POWER_LEVELS
|
|
rf.valid_tuning_steps = [2.5, 5.0, 6.25, 10.0, 12.5, 15.0, 20.0, 25.0,
|
|
50.0, 100.0]
|
|
|
|
return rf
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
def sync_in(self):
|
|
self._mmap = do_download(self)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
do_upload(self)
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number - 1])
|
|
|
|
def _decode_tone(self, val):
|
|
val = int(val)
|
|
if val == 16665:
|
|
return '', None, None
|
|
elif val >= 12000:
|
|
return 'DTCS', val - 12000, 'R'
|
|
elif val >= 8000:
|
|
return 'DTCS', val - 8000, 'N'
|
|
else:
|
|
return 'Tone', val / 10.0, None
|
|
|
|
def _encode_tone(self, memval, mode, value, pol):
|
|
if mode == '':
|
|
memval[0].set_raw(0xFF)
|
|
memval[1].set_raw(0xFF)
|
|
elif mode == 'Tone':
|
|
memval.set_value(int(value * 10))
|
|
elif mode == 'DTCS':
|
|
flag = 0x80 if pol == 'N' else 0xC0
|
|
memval.set_value(value)
|
|
memval[1].set_bits(flag)
|
|
else:
|
|
raise Exception("Internal error: invalid mode `%s'" % mode)
|
|
|
|
def get_memory(self, number):
|
|
_mem = self._memobj.memory[number - 1]
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
mem.number = number
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
|
|
# We'll consider any blank (i.e. 0MHz frequency) to be empty
|
|
if mem.freq == 0:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if _mem.rxfreq.get_raw() == "\xFF\xFF\xFF\xFF":
|
|
mem.freq = 0
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if _mem.txfreq.get_raw() == "\xFF\xFF\xFF\xFF":
|
|
mem.duplex = "off"
|
|
mem.offset = 0
|
|
elif int(_mem.rxfreq) == int(_mem.txfreq):
|
|
mem.duplex = ""
|
|
mem.offset = 0
|
|
else:
|
|
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
|
|
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
|
|
|
|
mem.mode = not _mem.narrow and "FM" or "NFM"
|
|
mem.power = H777_POWER_LEVELS[_mem.highpower]
|
|
|
|
mem.skip = _mem.skip and "S" or ""
|
|
|
|
txtone = self._decode_tone(_mem.txtone)
|
|
rxtone = self._decode_tone(_mem.rxtone)
|
|
chirp_common.split_tone_decode(mem, txtone, rxtone)
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
rs = RadioSetting("bcl", "Busy Channel Lockout",
|
|
RadioSettingValueBoolean(not _mem.bcl))
|
|
mem.extra.append(rs)
|
|
rs = RadioSetting("beatshift", "Beat Shift(scramble)",
|
|
RadioSettingValueBoolean(not _mem.beatshift))
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
# Get a low-level memory object mapped to the image
|
|
_mem = self._memobj.memory[mem.number - 1]
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\xFF" * (_mem.size() / 8))
|
|
return
|
|
|
|
_mem.rxfreq = mem.freq / 10
|
|
|
|
if mem.duplex == "off":
|
|
for i in range(0, 4):
|
|
_mem.txfreq[i].set_raw("\xFF")
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = mem.offset / 10
|
|
elif mem.duplex == "+":
|
|
_mem.txfreq = (mem.freq + mem.offset) / 10
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = (mem.freq - mem.offset) / 10
|
|
else:
|
|
_mem.txfreq = mem.freq / 10
|
|
|
|
txtone, rxtone = chirp_common.split_tone_encode(mem)
|
|
self._encode_tone(_mem.txtone, *txtone)
|
|
self._encode_tone(_mem.rxtone, *rxtone)
|
|
|
|
_mem.narrow = 'N' in mem.mode
|
|
_mem.highpower = mem.power == H777_POWER_LEVELS[1]
|
|
_mem.skip = mem.skip == "S"
|
|
|
|
for setting in mem.extra:
|
|
# NOTE: Only two settings right now, both are inverted
|
|
setattr(_mem, setting.get_name(), not int(setting.value))
|
|
|
|
# When set to one, official programming software (BF-480) shows always
|
|
# "WFM", even if we choose "NFM". Therefore, for compatibility
|
|
# purposes, we will set these to zero.
|
|
_mem.unknown1 = 0
|
|
_mem.unknown2 = 0
|
|
_mem.unknown3 = 0
|
|
|
|
def get_settings(self):
|
|
_settings = self._memobj.settings
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
top = RadioSettings(basic)
|
|
|
|
# TODO: Check that all these settings actually do what they
|
|
# say they do.
|
|
|
|
rs = RadioSetting("voiceprompt", "Voice prompt",
|
|
RadioSettingValueBoolean(_settings.voiceprompt))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voicelanguage", "Voice language",
|
|
RadioSettingValueList(
|
|
VOICE_LIST,
|
|
VOICE_LIST[_settings.voicelanguage]))
|
|
basic.append(rs)
|
|
|
|
if self.MODEL != "GT-22":
|
|
rs = RadioSetting("scan", "Scan",
|
|
RadioSettingValueBoolean(_settings.scan))
|
|
basic.append(rs)
|
|
|
|
if self._has_scanmodes:
|
|
rs = RadioSetting("settings2.scanmode", "Scan mode",
|
|
RadioSettingValueList(
|
|
SCANMODE_LIST,
|
|
SCANMODE_LIST[
|
|
self._memobj.settings2.scanmode]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("vox", "VOX",
|
|
RadioSettingValueBoolean(_settings.vox))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voxlevel", "VOX level",
|
|
RadioSettingValueInteger(
|
|
1, 5, _settings.voxlevel + 1))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voxinhibitonrx", "Inhibit VOX on receive",
|
|
RadioSettingValueBoolean(_settings.voxinhibitonrx))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("lowvolinhibittx", "Low voltage inhibit transmit",
|
|
RadioSettingValueBoolean(_settings.lowvolinhibittx))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("highvolinhibittx", "High voltage inhibit transmit",
|
|
RadioSettingValueBoolean(_settings.highvolinhibittx))
|
|
basic.append(rs)
|
|
|
|
if self.MODEL != "GT-22":
|
|
rs = RadioSetting("alarm", "Alarm",
|
|
RadioSettingValueBoolean(_settings.alarm))
|
|
basic.append(rs)
|
|
|
|
# TODO: This should probably be called “FM Broadcast Band Radio”
|
|
# or something. I'm not sure if the model actually has one though.
|
|
if self._has_fm:
|
|
rs = RadioSetting("fmradio", "FM function",
|
|
RadioSettingValueBoolean(_settings.fmradio))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings2.beep", "Beep",
|
|
RadioSettingValueBoolean(
|
|
self._memobj.settings2.beep))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings2.batterysaver", "Battery saver",
|
|
RadioSettingValueBoolean(
|
|
self._memobj.settings2.batterysaver))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings2.squelchlevel", "Squelch level",
|
|
RadioSettingValueInteger(
|
|
0, 9, self._memobj.settings2.squelchlevel))
|
|
basic.append(rs)
|
|
|
|
if self._has_sidekey:
|
|
rs = RadioSetting("settings2.sidekeyfunction", "Side key function",
|
|
RadioSettingValueList(
|
|
self.SIDEKEYFUNCTION_LIST,
|
|
self.SIDEKEYFUNCTION_LIST[
|
|
self._memobj.settings2.sidekeyfunction]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings2.timeouttimer", "Timeout timer",
|
|
RadioSettingValueList(
|
|
TIMEOUTTIMER_LIST,
|
|
TIMEOUTTIMER_LIST[
|
|
self._memobj.settings2.timeouttimer]))
|
|
basic.append(rs)
|
|
|
|
return top
|
|
|
|
def set_settings(self, settings):
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
if "." in element.get_name():
|
|
bits = element.get_name().split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = self._memobj.settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("Using apply callback")
|
|
element.run_apply_callback()
|
|
elif setting == "voxlevel":
|
|
setattr(obj, setting, int(element.value) - 1)
|
|
else:
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
|
|
class H777TestCase(unittest.TestCase):
|
|
|
|
def setUp(self):
|
|
self.driver = H777Radio(None)
|
|
self.testdata = bitwise.parse("lbcd foo[2];",
|
|
memmap.MemoryMap("\x00\x00"))
|
|
|
|
def test_decode_tone_dtcs_normal(self):
|
|
mode, value, pol = self.driver._decode_tone(8023)
|
|
self.assertEqual('DTCS', mode)
|
|
self.assertEqual(23, value)
|
|
self.assertEqual('N', pol)
|
|
|
|
def test_decode_tone_dtcs_rev(self):
|
|
mode, value, pol = self.driver._decode_tone(12023)
|
|
self.assertEqual('DTCS', mode)
|
|
self.assertEqual(23, value)
|
|
self.assertEqual('R', pol)
|
|
|
|
def test_decode_tone_tone(self):
|
|
mode, value, pol = self.driver._decode_tone(885)
|
|
self.assertEqual('Tone', mode)
|
|
self.assertEqual(88.5, value)
|
|
self.assertEqual(None, pol)
|
|
|
|
def test_decode_tone_none(self):
|
|
mode, value, pol = self.driver._decode_tone(16665)
|
|
self.assertEqual('', mode)
|
|
self.assertEqual(None, value)
|
|
self.assertEqual(None, pol)
|
|
|
|
def test_encode_tone_dtcs_normal(self):
|
|
self.driver._encode_tone(self.testdata.foo, 'DTCS', 23, 'N')
|
|
self.assertEqual(8023, int(self.testdata.foo))
|
|
|
|
def test_encode_tone_dtcs_rev(self):
|
|
self.driver._encode_tone(self.testdata.foo, 'DTCS', 23, 'R')
|
|
self.assertEqual(12023, int(self.testdata.foo))
|
|
|
|
def test_encode_tone(self):
|
|
self.driver._encode_tone(self.testdata.foo, 'Tone', 88.5, 'N')
|
|
self.assertEqual(885, int(self.testdata.foo))
|
|
|
|
def test_encode_tone_none(self):
|
|
self.driver._encode_tone(self.testdata.foo, '', 67.0, 'N')
|
|
self.assertEqual(16665, int(self.testdata.foo))
|
|
|
|
|
|
@directory.register
|
|
class ROGA2SRadio(H777Radio):
|
|
VENDOR = "Radioddity"
|
|
MODEL = "GA-2S"
|
|
_has_fm = False
|
|
SIDEKEYFUNCTION_LIST = ["Off", "Monitor", "Unused", "Alarm"]
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
# This model is only ever matched via metadata
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class H777PlusRadio(H777Radio):
|
|
VENDOR = "Retevis"
|
|
MODEL = "H777 Plus"
|
|
_has_fm = False
|
|
_has_scanmodes = False
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
# This model is only ever matched via metadata
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class GT22Radio(H777Radio):
|
|
VENDOR = "Baofeng"
|
|
MODEL = "GT-22"
|
|
_has_fm = False
|
|
_has_scanmodes = False
|
|
_has_sidekey = False
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
# This model is only ever matched via metadata
|
|
return False
|
