|
# Copyright 2019 Pavel Milanes CO7WT <pavelmc@gmail.com>
|
|
#
|
|
# Based on the work of Krystian Struzik <toner_82@tlen.pl>
|
|
# who figured out the crypt used and made possible the
|
|
# Wuoxun KG-UV8D Plus driver, in which this work is based.
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
"""Wouxun KG-UV8H radio management module"""
|
|
|
|
import time
|
|
import os
|
|
import logging
|
|
from chirp import util, chirp_common, bitwise, memmap, errors, directory
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettings
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
CMD_ID = 128 # \x80
|
|
CMD_END = 129 # \x81
|
|
CMD_RD = 130 # \82
|
|
CMD_WR = 131 # \83
|
|
|
|
MEM_VALID = 158
|
|
|
|
AB_LIST = ["A", "B"]
|
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0, 100.0]
|
|
STEP_LIST = [str(x) for x in STEPS]
|
|
ROGER_LIST = ["Off", "Begin", "End", "Both"]
|
|
TIMEOUT_LIST = ["Off"] + [str(x) + "s" for x in range(15, 901, 15)]
|
|
VOX_LIST = ["Off"] + ["%s" % x for x in range(1, 10)]
|
|
BANDWIDTH_LIST = ["Narrow", "Wide"]
|
|
VOICE_LIST = ["Off", "On"]
|
|
LANGUAGE_LIST = ["Chinese", "English"]
|
|
SCANMODE_LIST = ["TO", "CO", "SE"]
|
|
PF1KEY_LIST = ["Call", "VFTX"]
|
|
PF3KEY_LIST = ["Disable", "Scan", "Lamp", "Tele Alarm", "SOS-CH", "Radio"]
|
|
WORKMODE_LIST = ["VFO", "Channel No.", "Ch. No.+Freq.", "Ch. No.+Name"]
|
|
BACKLIGHT_LIST = ["Always On"] + [str(x) + "s" for x in range(1, 21)] + \
|
|
["Always Off"]
|
|
OFFSET_LIST = ["+", "-"]
|
|
PONMSG_LIST = ["Bitmap", "Battery Volts"]
|
|
SPMUTE_LIST = ["QT", "QT+DTMF", "QT*DTMF"]
|
|
DTMFST_LIST = ["DT-ST", "ANI-ST", "DT-ANI", "Off"]
|
|
DTMF_TIMES = ["%s" % x for x in range(50, 501, 10)]
|
|
RPTSET_LIST = ["", "X-DIRRPT", "X-TWRPT"] # TODO < what is index 0?
|
|
ALERTS = [1750, 2100, 1000, 1450]
|
|
ALERTS_LIST = [str(x) for x in ALERTS]
|
|
PTTID_LIST = ["Begin", "End", "Both"]
|
|
LIST_10 = ["Off"] + ["%s" % x for x in range(1, 11)]
|
|
SCANGRP_LIST = ["All"] + ["%s" % x for x in range(1, 11)]
|
|
SCQT_LIST = ["Decoder", "Encoder", "All"]
|
|
SMUTESET_LIST = ["Off", "Tx", "Rx", "Tx/Rx"]
|
|
POWER_LIST = ["Lo", "Hi"]
|
|
HOLD_TIMES = ["Off"] + ["%s" % x for x in range(100, 5001, 100)]
|
|
RPTMODE_LIST = ["Radio", "Repeater"]
|
|
|
|
# memory slot 0 is not used, start at 1 (so need 1000 slots, not 999)
|
|
# structure elements whose name starts with x are currently unidentified
|
|
|
|
_MEM_FORMAT = """
|
|
#seekto 0x0044;
|
|
struct {
|
|
u32 rx_start;
|
|
u32 rx_stop;
|
|
u32 tx_start;
|
|
u32 tx_stop;
|
|
} uhf_limits;
|
|
|
|
#seekto 0x0054;
|
|
struct {
|
|
u32 rx_start;
|
|
u32 rx_stop;
|
|
u32 tx_start;
|
|
u32 tx_stop;
|
|
} vhf_limits;
|
|
|
|
#seekto 0x0400;
|
|
struct {
|
|
u8 oem1[8];
|
|
u8 unknown[2];
|
|
u8 unknown2[10];
|
|
u8 unknown3[10];
|
|
u8 unknown4[8];
|
|
u8 model[10];
|
|
u8 version[6];
|
|
u8 date[8];
|
|
u8 unknown5[1];
|
|
u8 oem2[8];
|
|
} oem_info;
|
|
|
|
#seekto 0x0480;
|
|
struct {
|
|
u16 lower;
|
|
u16 upper;
|
|
} scan_groups[10];
|
|
|
|
#seekto 0x0500;
|
|
struct {
|
|
u8 call_code[6];
|
|
} call_groups[20];
|
|
|
|
#seekto 0x0580;
|
|
struct {
|
|
char call_name[6];
|
|
} call_group_name[20];
|
|
|
|
#seekto 0x0800;
|
|
struct {
|
|
u8 ponmsg;
|
|
char dispstr[15];
|
|
u8 x0810;
|
|
u8 x0811;
|
|
u8 x0812;
|
|
u8 x0813;
|
|
u8 x0814;
|
|
u8 voice;
|
|
u8 timeout;
|
|
u8 toalarm;
|
|
u8 channel_menu;
|
|
u8 power_save;
|
|
u8 autolock;
|
|
u8 keylock;
|
|
u8 beep;
|
|
u8 stopwatch;
|
|
u8 vox;
|
|
u8 scan_rev;
|
|
u8 backlight;
|
|
u8 roger_beep;
|
|
u8 x0822[6];
|
|
u8 x0823[6];
|
|
u16 pri_ch;
|
|
u8 ani_sw;
|
|
u8 ptt_delay;
|
|
u8 ani_code[6];
|
|
u8 dtmf_st;
|
|
u8 bcl_a;
|
|
u8 bcl_b;
|
|
u8 ptt_id;
|
|
u8 prich_sw;
|
|
u8 rpt_set;
|
|
u8 rpt_spk;
|
|
u8 rpt_ptt;
|
|
u8 alert;
|
|
u8 pf1_func;
|
|
u8 pf3_func;
|
|
u8 x0843;
|
|
u8 workmode_a;
|
|
u8 workmode_b;
|
|
u8 dtmf_tx_time;
|
|
u8 dtmf_interval;
|
|
u8 main_ab;
|
|
u16 work_cha;
|
|
u16 work_chb;
|
|
u8 x084d;
|
|
u8 x084e;
|
|
u8 x084f;
|
|
u8 x0850;
|
|
u8 x0851;
|
|
u8 x0852;
|
|
u8 x0853;
|
|
u8 x0854;
|
|
u8 rpt_mode;
|
|
u8 language;
|
|
u8 x0857;
|
|
u8 x0858;
|
|
u8 x0859;
|
|
u8 x085a;
|
|
u8 x085b;
|
|
u8 x085c;
|
|
u8 x085d;
|
|
u8 x085e;
|
|
u8 single_display;
|
|
u8 ring_time;
|
|
u8 scg_a;
|
|
u8 scg_b;
|
|
u8 x0863;
|
|
u8 rpt_tone;
|
|
u8 rpt_hold;
|
|
u8 scan_det;
|
|
u8 sc_qt;
|
|
u8 x0868;
|
|
u8 smuteset;
|
|
u8 callcode;
|
|
} settings;
|
|
|
|
#seekto 0x0880;
|
|
struct {
|
|
u32 rxfreq;
|
|
u32 txoffset;
|
|
u16 rxtone;
|
|
u16 txtone;
|
|
u8 scrambler:4,
|
|
unknown1:2,
|
|
power:1,
|
|
unknown2:1;
|
|
u8 unknown3:1,
|
|
shift_dir:2
|
|
unknown4:1,
|
|
compander:1,
|
|
mute_mode:2,
|
|
iswide:1;
|
|
u8 step;
|
|
u8 squelch;
|
|
} vfoa;
|
|
|
|
#seekto 0x08c0;
|
|
struct {
|
|
u32 rxfreq;
|
|
u32 txoffset;
|
|
u16 rxtone;
|
|
u16 txtone;
|
|
u8 scrambler:4,
|
|
unknown1:2,
|
|
power:1,
|
|
unknown2:1;
|
|
u8 unknown3:1,
|
|
shift_dir:2
|
|
unknown4:1,
|
|
compander:1,
|
|
mute_mode:2,
|
|
iswide:1;
|
|
u8 step;
|
|
u8 squelch;
|
|
} vfob;
|
|
|
|
#seekto 0x0900;
|
|
struct {
|
|
u32 rxfreq;
|
|
u32 txfreq;
|
|
u16 rxtone;
|
|
u16 txtone;
|
|
u8 scrambler:4,
|
|
unknown1:2,
|
|
power:1,
|
|
unknown2:1;
|
|
u8 unknown3:2,
|
|
scan_add:1,
|
|
unknown4:1,
|
|
compander:1,
|
|
mute_mode:2,
|
|
iswide:1;
|
|
u16 padding;
|
|
} memory[1000];
|
|
|
|
#seekto 0x4780;
|
|
struct {
|
|
u8 name[8];
|
|
u8 unknown[4];
|
|
} names[1000];
|
|
|
|
#seekto 0x7670;
|
|
u8 valid[1000];
|
|
"""
|
|
|
|
# Support for the Wouxun KG-UV8H radio
|
|
# Serial coms are at 19200 baud
|
|
# The data is passed in variable length records
|
|
# Record structure:
|
|
# Offset Usage
|
|
# 0 start of record (\x7c)
|
|
# 1 Command (\x80 Identify \x81 End/Reboot \x82 Read \x83 Write)
|
|
# 2 direction (\xff PC-> Radio, \x00 Radio -> PC)
|
|
# 3 length of payload (excluding header/checksum) (n)
|
|
# 4 payload (n bytes)
|
|
# 4+n+1 checksum - byte sum (% 256) of bytes 1 -> 4+n
|
|
#
|
|
# Memory Read Records:
|
|
# the payload is 3 bytes, first 2 are offset (big endian),
|
|
# 3rd is number of bytes to read
|
|
# Memory Write Records:
|
|
# the maximum payload size (from the Wouxun software) seems to be 66 bytes
|
|
# (2 bytes location + 64 bytes data).
|
|
|
|
class KGUV8TRadio(chirp_common.Alias):
|
|
VENDOR = "Wuoxun"
|
|
MODEL = "KG-UV8H"
|
|
|
|
@directory.register
|
|
class KGUV8HRadio(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
|
|
"""Wouxun KG-UV8H"""
|
|
VENDOR = "Wouxun"
|
|
MODEL = "KG-UV8H"
|
|
_model = "KG-UV8D-B"
|
|
_file_ident = "UV8H"
|
|
BAUD_RATE = 19200
|
|
POWER_LEVELS = [chirp_common.PowerLevel("L", watts=1),
|
|
chirp_common.PowerLevel("H", watts=5)]
|
|
_mmap = ""
|
|
ALIASES = [KGUV8TRadio,]
|
|
|
|
def _checksum(self, data):
|
|
cs = 0
|
|
for byte in data:
|
|
cs += ord(byte)
|
|
return chr(cs % 256)
|
|
|
|
def _write_record(self, cmd, payload = None):
|
|
# build the packet
|
|
_header = '\x7c' + chr(cmd) + '\xff'
|
|
|
|
_length = 0
|
|
if payload:
|
|
_length = len(payload)
|
|
|
|
# update the length field
|
|
_header += chr(_length)
|
|
|
|
if payload:
|
|
# calculate checksum then add it with the payload to the packet and encrypt
|
|
crc = self._checksum(_header[1:] + payload)
|
|
payload += crc
|
|
_header += self.encrypt(payload)
|
|
else:
|
|
# calculate and add encrypted checksum to the packet
|
|
crc = self._checksum(_header[1:])
|
|
_header += self.strxor(crc, '\x57')
|
|
|
|
try:
|
|
self.pipe.write(_header)
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
|
|
def _read_record(self):
|
|
# read 4 chars for the header
|
|
_header = self.pipe.read(4)
|
|
if len(_header) != 4:
|
|
raise errors.RadioError('Radio did not respond')
|
|
_length = ord(_header[3])
|
|
_packet = self.pipe.read(_length)
|
|
_rcs_xor = _packet[-1]
|
|
_packet = self.decrypt(_packet)
|
|
_cs = ord(self._checksum(_header[1:] + _packet))
|
|
# read the checksum and decrypt it
|
|
_rcs = ord(self.strxor(self.pipe.read(1), _rcs_xor))
|
|
return (_rcs != _cs, _packet)
|
|
|
|
def decrypt(self, data):
|
|
result = ''
|
|
for i in range(len(data)-1, 0, -1):
|
|
result += self.strxor(data[i], data[i - 1])
|
|
result += self.strxor(data[0], '\x57')
|
|
return result[::-1]
|
|
|
|
def encrypt(self, data):
|
|
result = self.strxor('\x57', data[0])
|
|
for i in range(1, len(data), 1):
|
|
result += self.strxor(result[i - 1], data[i])
|
|
return result
|
|
|
|
def strxor (self, xora, xorb):
|
|
return chr(ord(xora) ^ ord(xorb))
|
|
|
|
# Identify the radio
|
|
#
|
|
# A Gotcha: the first identify packet returns a bad checksum, subsequent
|
|
# attempts return the correct checksum... (well it does on my radio!)
|
|
#
|
|
# The ID record returned by the radio also includes the current frequency range
|
|
# as 4 bytes big-endian in 10Hz increments
|
|
#
|
|
# Offset
|
|
# 0:10 Model, zero padded (Looks for 'KG-UV8D-B')
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
id = cls._file_ident
|
|
return cls._file_ident in filedata[0x426:0x430]
|
|
|
|
def _identify(self):
|
|
"""Do the identification dance"""
|
|
for _i in range(0, 10):
|
|
self._write_record(CMD_ID)
|
|
_chksum_err, _resp = self._read_record()
|
|
LOG.debug("Got:\n%s" % util.hexprint(_resp))
|
|
if _chksum_err:
|
|
LOG.error("Checksum error: retrying ident...")
|
|
time.sleep(0.100)
|
|
continue
|
|
LOG.debug("Model %s" % util.hexprint(_resp[0:9]))
|
|
if _resp[0:9] == self._model:
|
|
return
|
|
if len(_resp) == 0:
|
|
raise Exception("Radio not responding")
|
|
else:
|
|
raise Exception("Unable to identify radio")
|
|
|
|
def _finish(self):
|
|
self._write_record(CMD_END)
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(_MEM_FORMAT, self._mmap)
|
|
|
|
def sync_in(self):
|
|
try:
|
|
self._mmap = self._download()
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
self._upload()
|
|
|
|
# TODO: Load all memory.
|
|
# It would be smarter to only load the active areas and none of
|
|
# the padding/unused areas. Padding still need to be investigated.
|
|
def _download(self):
|
|
"""Talk to a wouxun KG-UV8H and do a download"""
|
|
try:
|
|
self._identify()
|
|
return self._do_download(0, 32768, 64)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
LOG.exception('Unknown error during download process')
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
|
|
def _do_download(self, start, end, blocksize):
|
|
# allocate & fill memory
|
|
image = ""
|
|
for i in range(start, end, blocksize):
|
|
req = chr(i / 256) + chr(i % 256) + chr(blocksize)
|
|
self._write_record(CMD_RD, req)
|
|
cs_error, resp = self._read_record()
|
|
if cs_error:
|
|
LOG.debug(util.hexprint(resp))
|
|
raise Exception("Checksum error on read")
|
|
# LOG.debug("Got:\n%s" % util.hexprint(resp))
|
|
image += resp[2:]
|
|
if self.status_fn:
|
|
status = chirp_common.Status()
|
|
status.cur = i
|
|
status.max = end
|
|
status.msg = "Cloning from radio"
|
|
self.status_fn(status)
|
|
self._finish()
|
|
return memmap.MemoryMap(''.join(image))
|
|
|
|
def _upload(self):
|
|
"""Talk to a wouxun KG-UV8H and do a upload"""
|
|
try:
|
|
self._identify()
|
|
self._do_upload(0, 32768, 64)
|
|
except errors.RadioError:
|
|
raise
|
|
except Exception, e:
|
|
raise errors.RadioError("Failed to communicate with radio: %s" % e)
|
|
return
|
|
|
|
def _do_upload(self, start, end, blocksize):
|
|
ptr = start
|
|
for i in range(start, end, blocksize):
|
|
req = chr(i / 256) + chr(i % 256)
|
|
chunk = self.get_mmap()[ptr:ptr + blocksize]
|
|
self._write_record(CMD_WR, req + chunk)
|
|
LOG.debug(util.hexprint(req + chunk))
|
|
cserr, ack = self._read_record()
|
|
LOG.debug(util.hexprint(ack))
|
|
j = ord(ack[0]) * 256 + ord(ack[1])
|
|
if cserr or j != ptr:
|
|
raise Exception("Radio did not ack block %i" % ptr)
|
|
ptr += blocksize
|
|
if self.status_fn:
|
|
status = chirp_common.Status()
|
|
status.cur = i
|
|
status.max = end
|
|
status.msg = "Cloning to radio"
|
|
self.status_fn(status)
|
|
self._finish()
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_ctone = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_cross = True
|
|
rf.has_tuning_step = False
|
|
rf.has_bank = False
|
|
rf.can_odd_split = True
|
|
rf.valid_skips = ["", "S"]
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = [
|
|
"Tone->Tone",
|
|
"Tone->DTCS",
|
|
"DTCS->Tone",
|
|
"DTCS->",
|
|
"->Tone",
|
|
"->DTCS",
|
|
"DTCS->DTCS",
|
|
]
|
|
rf.valid_modes = ["FM", "NFM"]
|
|
rf.valid_power_levels = self.POWER_LEVELS
|
|
rf.valid_name_length = 8
|
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
|
rf.valid_bands = [(137000000, 175000000), # supports 2m
|
|
(400000000, 480000000)] # supports 70cm
|
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
|
rf.memory_bounds = (1, 999) # 999 memories
|
|
rf.valid_tuning_steps = STEPS
|
|
return rf
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = \
|
|
('This driver is experimental.\n'
|
|
'\n'
|
|
'Please keep a copy of your memories with the original software '
|
|
'if you treasure them, this driver is new and may contain'
|
|
' bugs.\n'
|
|
'\n'
|
|
)
|
|
return rp
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number])
|
|
|
|
def _get_tone(self, _mem, mem):
|
|
def _get_dcs(val):
|
|
code = int("%03o" % (val & 0x07FF))
|
|
pol = (val & 0x8000) and "R" or "N"
|
|
return code, pol
|
|
|
|
tpol = False
|
|
if _mem.txtone != 0xFFFF and (_mem.txtone & 0x2800) == 0x2800:
|
|
tcode, tpol = _get_dcs(_mem.txtone)
|
|
mem.dtcs = tcode
|
|
txmode = "DTCS"
|
|
elif _mem.txtone != 0xFFFF and _mem.txtone != 0x0:
|
|
mem.rtone = (_mem.txtone & 0x7fff) / 10.0
|
|
txmode = "Tone"
|
|
else:
|
|
txmode = ""
|
|
|
|
rpol = False
|
|
if _mem.rxtone != 0xFFFF and (_mem.rxtone & 0x2800) == 0x2800:
|
|
rcode, rpol = _get_dcs(_mem.rxtone)
|
|
mem.rx_dtcs = rcode
|
|
rxmode = "DTCS"
|
|
elif _mem.rxtone != 0xFFFF and _mem.rxtone != 0x0:
|
|
mem.ctone = (_mem.rxtone & 0x7fff) / 10.0
|
|
rxmode = "Tone"
|
|
else:
|
|
rxmode = ""
|
|
|
|
if txmode == "Tone" and not rxmode:
|
|
mem.tmode = "Tone"
|
|
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
|
|
mem.tmode = "TSQL"
|
|
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
|
|
mem.tmode = "DTCS"
|
|
elif rxmode or txmode:
|
|
mem.tmode = "Cross"
|
|
mem.cross_mode = "%s->%s" % (txmode, rxmode)
|
|
|
|
# always set it even if no dtcs is used
|
|
mem.dtcs_polarity = "%s%s" % (tpol or "N", rpol or "N")
|
|
|
|
LOG.debug("Got TX %s (%i) RX %s (%i)" %
|
|
(txmode, _mem.txtone, rxmode, _mem.rxtone))
|
|
|
|
def get_memory(self, number):
|
|
_mem = self._memobj.memory[number]
|
|
_nam = self._memobj.names[number]
|
|
|
|
mem = chirp_common.Memory()
|
|
mem.number = number
|
|
_valid = self._memobj.valid[mem.number]
|
|
LOG.debug("%d %s", number, _valid == MEM_VALID)
|
|
if _valid != MEM_VALID:
|
|
mem.empty = True
|
|
return mem
|
|
else:
|
|
mem.empty = False
|
|
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
|
|
if _mem.txfreq == 0xFFFFFFFF:
|
|
# TX freq not set
|
|
mem.duplex = "off"
|
|
mem.offset = 0
|
|
elif int(_mem.rxfreq) == int(_mem.txfreq):
|
|
mem.duplex = ""
|
|
mem.offset = 0
|
|
elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000:
|
|
mem.duplex = "split"
|
|
mem.offset = int(_mem.txfreq) * 10
|
|
else:
|
|
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
|
|
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
|
|
|
|
for char in _nam.name:
|
|
if char != 0:
|
|
mem.name += chr(char)
|
|
mem.name = mem.name.rstrip()
|
|
|
|
self._get_tone(_mem, mem)
|
|
|
|
mem.skip = "" if bool(_mem.scan_add) else "S"
|
|
|
|
mem.power = self.POWER_LEVELS[_mem.power]
|
|
mem.mode = _mem.iswide and "FM" or "NFM"
|
|
return mem
|
|
|
|
def _set_tone(self, mem, _mem):
|
|
def _set_dcs(code, pol):
|
|
val = int("%i" % code, 8) + 0x2800
|
|
if pol == "R":
|
|
val += 0x8000
|
|
return val
|
|
|
|
rx_mode = tx_mode = None
|
|
rxtone = txtone = 0x0000
|
|
|
|
if mem.tmode == "Tone":
|
|
tx_mode = "Tone"
|
|
rx_mode = None
|
|
txtone = int(mem.rtone * 10) + 0x8000
|
|
elif mem.tmode == "TSQL":
|
|
rx_mode = tx_mode = "Tone"
|
|
rxtone = txtone = int(mem.ctone * 10) + 0x8000
|
|
elif mem.tmode == "DTCS":
|
|
tx_mode = rx_mode = "DTCS"
|
|
txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
|
|
rxtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1])
|
|
elif mem.tmode == "Cross":
|
|
tx_mode, rx_mode = mem.cross_mode.split("->")
|
|
if tx_mode == "DTCS":
|
|
txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
|
|
elif tx_mode == "Tone":
|
|
txtone = int(mem.rtone * 10) + 0x8000
|
|
if rx_mode == "DTCS":
|
|
rxtone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1])
|
|
elif rx_mode == "Tone":
|
|
rxtone = int(mem.ctone * 10) + 0x8000
|
|
|
|
_mem.rxtone = rxtone
|
|
_mem.txtone = txtone
|
|
|
|
LOG.debug("Set TX %s (%i) RX %s (%i)" %
|
|
(tx_mode, _mem.txtone, rx_mode, _mem.rxtone))
|
|
|
|
def set_memory(self, mem):
|
|
number = mem.number
|
|
|
|
_mem = self._memobj.memory[number]
|
|
_nam = self._memobj.names[number]
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\x00" * (_mem.size() / 8))
|
|
self._memobj.valid[number] = 0
|
|
self._memobj.names[number].set_raw("\x00" * (_nam.size() / 8))
|
|
return
|
|
|
|
_mem.rxfreq = int(mem.freq / 10)
|
|
if mem.duplex == "off":
|
|
_mem.txfreq = 0xFFFFFFFF
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = int(mem.offset / 10)
|
|
elif mem.duplex == "off":
|
|
for i in range(0, 4):
|
|
_mem.txfreq[i].set_raw("\xFF")
|
|
elif mem.duplex == "+":
|
|
_mem.txfreq = int(mem.freq / 10) + int(mem.offset / 10)
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = int(mem.freq / 10) - int(mem.offset / 10)
|
|
else:
|
|
_mem.txfreq = int(mem.freq / 10)
|
|
_mem.scan_add = int(mem.skip != "S")
|
|
_mem.iswide = int(mem.mode == "FM")
|
|
# set the tone
|
|
self._set_tone(mem, _mem)
|
|
# set the scrambler and compander to off by default
|
|
_mem.scrambler = 0
|
|
_mem.compander = 0
|
|
# set the power
|
|
if mem.power:
|
|
_mem.power = self.POWER_LEVELS.index(mem.power)
|
|
else:
|
|
_mem.power = True
|
|
# set to mute mode to QT (not QT+DTMF or QT*DTMF) by default
|
|
_mem.mute_mode = 0
|
|
|
|
for i in range(0, len(_nam.name)):
|
|
if i < len(mem.name) and mem.name[i]:
|
|
_nam.name[i] = ord(mem.name[i])
|
|
else:
|
|
_nam.name[i] = 0x0
|
|
self._memobj.valid[mem.number] = MEM_VALID
|
|
|
|
def _get_settings(self):
|
|
_settings = self._memobj.settings
|
|
_vfoa = self._memobj.vfoa
|
|
_vfob = self._memobj.vfob
|
|
cfg_grp = RadioSettingGroup("cfg_grp", "Configuration")
|
|
vfoa_grp = RadioSettingGroup("vfoa_grp", "VFO A Settings")
|
|
vfob_grp = RadioSettingGroup("vfob_grp", "VFO B Settings")
|
|
key_grp = RadioSettingGroup("key_grp", "Key Settings")
|
|
lmt_grp = RadioSettingGroup("lmt_grp", "Frequency Limits")
|
|
uhf_lmt_grp = RadioSettingGroup("uhf_lmt_grp", "UHF")
|
|
vhf_lmt_grp = RadioSettingGroup("vhf_lmt_grp", "VHF")
|
|
oem_grp = RadioSettingGroup("oem_grp", "OEM Info")
|
|
|
|
lmt_grp.append(vhf_lmt_grp);
|
|
lmt_grp.append(uhf_lmt_grp);
|
|
group = RadioSettings(cfg_grp, vfoa_grp, vfob_grp,
|
|
key_grp, lmt_grp, oem_grp)
|
|
|
|
#
|
|
# Configuration Settings
|
|
#
|
|
rs = RadioSetting("channel_menu", "Menu available in channel mode",
|
|
RadioSettingValueBoolean(_settings.channel_menu))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("ponmsg", "Poweron message",
|
|
RadioSettingValueList(
|
|
PONMSG_LIST, PONMSG_LIST[_settings.ponmsg]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("voice", "Voice Guide",
|
|
RadioSettingValueBoolean(_settings.voice))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("language", "Language",
|
|
RadioSettingValueList(LANGUAGE_LIST,
|
|
LANGUAGE_LIST[_settings.
|
|
language]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("timeout", "Timeout Timer",
|
|
RadioSettingValueList(
|
|
TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("toalarm", "Timeout Alarm",
|
|
RadioSettingValueInteger(0, 10, _settings.toalarm))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("roger_beep", "Roger Beep",
|
|
RadioSettingValueList(ROGER_LIST,
|
|
ROGER_LIST[_settings.roger_beep]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("power_save", "Power save",
|
|
RadioSettingValueBoolean(_settings.power_save))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("autolock", "Autolock",
|
|
RadioSettingValueBoolean(_settings.autolock))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("keylock", "Keypad Lock",
|
|
RadioSettingValueBoolean(_settings.keylock))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("beep", "Keypad Beep",
|
|
RadioSettingValueBoolean(_settings.beep))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("stopwatch", "Stopwatch",
|
|
RadioSettingValueBoolean(_settings.stopwatch))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("backlight", "Backlight",
|
|
RadioSettingValueList(BACKLIGHT_LIST,
|
|
BACKLIGHT_LIST[_settings.
|
|
backlight]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("dtmf_st", "DTMF Sidetone",
|
|
RadioSettingValueList(DTMFST_LIST,
|
|
DTMFST_LIST[_settings.
|
|
dtmf_st]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("ani_sw", "ANI-ID Switch",
|
|
RadioSettingValueBoolean(_settings.ani_sw))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("ptt_id", "PTT-ID Delay",
|
|
RadioSettingValueList(PTTID_LIST,
|
|
PTTID_LIST[_settings.ptt_id]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("ring_time", "Ring Time",
|
|
RadioSettingValueList(LIST_10,
|
|
LIST_10[_settings.ring_time]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("scan_rev", "Scan Mode",
|
|
RadioSettingValueList(SCANMODE_LIST,
|
|
SCANMODE_LIST[_settings.
|
|
scan_rev]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("vox", "VOX",
|
|
RadioSettingValueList(LIST_10,
|
|
LIST_10[_settings.vox]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("prich_sw", "Priority Channel Switch",
|
|
RadioSettingValueBoolean(_settings.prich_sw))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("pri_ch", "Priority Channel",
|
|
RadioSettingValueInteger(1, 999, _settings.pri_ch))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("rpt_mode", "Radio Mode",
|
|
RadioSettingValueList(RPTMODE_LIST,
|
|
RPTMODE_LIST[_settings.
|
|
rpt_mode]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("rpt_set", "Repeater Setting",
|
|
RadioSettingValueList(RPTSET_LIST,
|
|
RPTSET_LIST[_settings.
|
|
rpt_set]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("rpt_spk", "Repeater Mode Speaker",
|
|
RadioSettingValueBoolean(_settings.rpt_spk))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("rpt_ptt", "Repeater PTT",
|
|
RadioSettingValueBoolean(_settings.rpt_ptt))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("dtmf_tx_time", "DTMF Tx Duration",
|
|
RadioSettingValueList(DTMF_TIMES,
|
|
DTMF_TIMES[_settings.
|
|
dtmf_tx_time]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("dtmf_interval", "DTMF Interval",
|
|
RadioSettingValueList(DTMF_TIMES,
|
|
DTMF_TIMES[_settings.
|
|
dtmf_interval]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("alert", "Alert Tone",
|
|
RadioSettingValueList(ALERTS_LIST,
|
|
ALERTS_LIST[_settings.alert]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("rpt_tone", "Repeater Tone",
|
|
RadioSettingValueBoolean(_settings.rpt_tone))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("rpt_hold", "Repeater Hold Time",
|
|
RadioSettingValueList(HOLD_TIMES,
|
|
HOLD_TIMES[_settings.
|
|
rpt_hold]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("scan_det", "Scan DET",
|
|
RadioSettingValueBoolean(_settings.scan_det))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("sc_qt", "SC-QT",
|
|
RadioSettingValueList(SCQT_LIST,
|
|
SCQT_LIST[_settings.sc_qt]))
|
|
cfg_grp.append(rs)
|
|
rs = RadioSetting("smuteset", "SubFreq Mute",
|
|
RadioSettingValueList(SMUTESET_LIST,
|
|
SMUTESET_LIST[_settings.
|
|
smuteset]))
|
|
cfg_grp.append(rs)
|
|
|
|
#
|
|
# VFO A Settings
|
|
#
|
|
rs = RadioSetting("workmode_a", "VFO A Workmode",
|
|
RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_a]))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("work_cha", "VFO A Channel",
|
|
RadioSettingValueInteger(1, 999, _settings.work_cha))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("vfoa.rxfreq", "VFO A Rx Frequency",
|
|
RadioSettingValueInteger(
|
|
134000000, 520000000, _vfoa.rxfreq * 10, 5000))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("vfoa.txoffset", "VFO A Tx Offset",
|
|
RadioSettingValueInteger(
|
|
0, 520000000, _vfoa.txoffset * 10, 5000))
|
|
vfoa_grp.append(rs)
|
|
# u16 rxtone;
|
|
# u16 txtone;
|
|
rs = RadioSetting("vfoa.power", "VFO A Power",
|
|
RadioSettingValueList(
|
|
POWER_LIST, POWER_LIST[_vfoa.power]))
|
|
vfoa_grp.append(rs)
|
|
# shift_dir:2
|
|
rs = RadioSetting("vfoa.iswide", "VFO A NBFM",
|
|
RadioSettingValueList(
|
|
BANDWIDTH_LIST, BANDWIDTH_LIST[_vfoa.iswide]))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("vfoa.mute_mode", "VFO A Mute",
|
|
RadioSettingValueList(
|
|
SPMUTE_LIST, SPMUTE_LIST[_vfoa.mute_mode]))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("vfoa.step", "VFO A Step (kHz)",
|
|
RadioSettingValueList(
|
|
STEP_LIST, STEP_LIST[_vfoa.step]))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("vfoa.squelch", "VFO A Squelch",
|
|
RadioSettingValueList(
|
|
LIST_10, LIST_10[_vfoa.squelch]))
|
|
vfoa_grp.append(rs)
|
|
rs = RadioSetting("bcl_a", "Busy Channel Lock-out A",
|
|
RadioSettingValueBoolean(_settings.bcl_a))
|
|
vfoa_grp.append(rs)
|
|
|
|
#
|
|
# VFO B Settings
|
|
#
|
|
rs = RadioSetting("workmode_b", "VFO B Workmode",
|
|
RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_b]))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("work_chb", "VFO B Channel",
|
|
RadioSettingValueInteger(1, 999, _settings.work_chb))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("vfob.rxfreq", "VFO B Rx Frequency",
|
|
RadioSettingValueInteger(
|
|
134000000, 520000000, _vfob.rxfreq * 10, 5000))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("vfob.txoffset", "VFO B Tx Offset",
|
|
RadioSettingValueInteger(
|
|
0, 520000000, _vfob.txoffset * 10, 5000))
|
|
vfob_grp.append(rs)
|
|
# u16 rxtone;
|
|
# u16 txtone;
|
|
rs = RadioSetting("vfob.power", "VFO B Power",
|
|
RadioSettingValueList(
|
|
POWER_LIST, POWER_LIST[_vfob.power]))
|
|
vfob_grp.append(rs)
|
|
# shift_dir:2
|
|
rs = RadioSetting("vfob.iswide", "VFO B NBFM",
|
|
RadioSettingValueList(
|
|
BANDWIDTH_LIST, BANDWIDTH_LIST[_vfob.iswide]))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("vfob.mute_mode", "VFO B Mute",
|
|
RadioSettingValueList(
|
|
SPMUTE_LIST, SPMUTE_LIST[_vfob.mute_mode]))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("vfob.step", "VFO B Step (kHz)",
|
|
RadioSettingValueList(
|
|
STEP_LIST, STEP_LIST[_vfob.step]))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("vfob.squelch", "VFO B Squelch",
|
|
RadioSettingValueList(
|
|
LIST_10, LIST_10[_vfob.squelch]))
|
|
vfob_grp.append(rs)
|
|
rs = RadioSetting("bcl_b", "Busy Channel Lock-out B",
|
|
RadioSettingValueBoolean(_settings.bcl_b))
|
|
vfob_grp.append(rs)
|
|
|
|
#
|
|
# Key Settings
|
|
#
|
|
_msg = str(_settings.dispstr).split("\0")[0]
|
|
val = RadioSettingValueString(0, 15, _msg)
|
|
val.set_mutable(True)
|
|
rs = RadioSetting("dispstr", "Display Message", val)
|
|
key_grp.append(rs)
|
|
|
|
dtmfchars = "0123456789"
|
|
_codeobj = _settings.ani_code
|
|
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x0A])
|
|
val = RadioSettingValueString(3, 6, _code, False)
|
|
val.set_charset(dtmfchars)
|
|
rs = RadioSetting("ani_code", "ANI Code", val)
|
|
def apply_ani_id(setting, obj):
|
|
value = []
|
|
for j in range(0, 6):
|
|
try:
|
|
value.append(dtmfchars.index(str(setting.value)[j]))
|
|
except IndexError:
|
|
value.append(0xFF)
|
|
obj.ani_code = value
|
|
rs.set_apply_callback(apply_ani_id, _settings)
|
|
key_grp.append(rs)
|
|
|
|
rs = RadioSetting("pf1_func", "PF1 Key function",
|
|
RadioSettingValueList(
|
|
PF1KEY_LIST,
|
|
PF1KEY_LIST[_settings.pf1_func]))
|
|
key_grp.append(rs)
|
|
rs = RadioSetting("pf3_func", "PF3 Key function",
|
|
RadioSettingValueList(
|
|
PF3KEY_LIST,
|
|
PF3KEY_LIST[_settings.pf3_func]))
|
|
key_grp.append(rs)
|
|
|
|
#
|
|
# Limits settings
|
|
#
|
|
rs = RadioSetting("vhf_limits.rx_start", "VHF RX Lower Limit",
|
|
RadioSettingValueInteger(
|
|
134000000, 174997500,
|
|
self._memobj.vhf_limits.rx_start * 10, 5000))
|
|
vhf_lmt_grp.append(rs)
|
|
rs = RadioSetting("vhf_limits.rx_stop", "VHF RX Upper Limit",
|
|
RadioSettingValueInteger(
|
|
134000000, 174997500,
|
|
self._memobj.vhf_limits.rx_stop * 10, 5000))
|
|
vhf_lmt_grp.append(rs)
|
|
rs = RadioSetting("vhf_limits.tx_start", "VHF TX Lower Limit",
|
|
RadioSettingValueInteger(
|
|
134000000, 174997500,
|
|
self._memobj.vhf_limits.tx_start * 10, 5000))
|
|
vhf_lmt_grp.append(rs)
|
|
rs = RadioSetting("vhf_limits.tx_stop", "VHF TX Upper Limit",
|
|
RadioSettingValueInteger(
|
|
134000000, 174997500,
|
|
self._memobj.vhf_limits.tx_stop * 10, 5000))
|
|
vhf_lmt_grp.append(rs)
|
|
|
|
rs = RadioSetting("uhf_limits.rx_start", "UHF RX Lower Limit",
|
|
RadioSettingValueInteger(
|
|
400000000, 520000000,
|
|
self._memobj.uhf_limits.rx_start * 10, 5000))
|
|
uhf_lmt_grp.append(rs)
|
|
rs = RadioSetting("uhf_limits.rx_stop", "UHF RX Upper Limit",
|
|
RadioSettingValueInteger(
|
|
400000000, 520000000,
|
|
self._memobj.uhf_limits.rx_stop * 10, 5000))
|
|
uhf_lmt_grp.append(rs)
|
|
rs = RadioSetting("uhf_limits.tx_start", "UHF TX Lower Limit",
|
|
RadioSettingValueInteger(
|
|
400000000, 520000000,
|
|
self._memobj.uhf_limits.tx_start * 10, 5000))
|
|
uhf_lmt_grp.append(rs)
|
|
rs = RadioSetting("uhf_limits.tx_stop", "UHF TX Upper Limit",
|
|
RadioSettingValueInteger(
|
|
400000000, 520000000,
|
|
self._memobj.uhf_limits.tx_stop * 10, 5000))
|
|
uhf_lmt_grp.append(rs)
|
|
|
|
#
|
|
# OEM info
|
|
#
|
|
def _decode(lst):
|
|
_str = ''.join([chr(c) for c in lst
|
|
if chr(c) in chirp_common.CHARSET_ASCII])
|
|
return _str
|
|
|
|
def do_nothing(setting, obj):
|
|
return
|
|
|
|
_str = _decode(self._memobj.oem_info.model)
|
|
val = RadioSettingValueString(0, 15, _str)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("oem_info.model", "Model", val)
|
|
rs.set_apply_callback(do_nothing, _settings)
|
|
oem_grp.append(rs)
|
|
_str = _decode(self._memobj.oem_info.oem1)
|
|
val = RadioSettingValueString(0, 15, _str)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("oem_info.oem1", "OEM String 1", val)
|
|
rs.set_apply_callback(do_nothing, _settings)
|
|
oem_grp.append(rs)
|
|
_str = _decode(self._memobj.oem_info.oem2)
|
|
val = RadioSettingValueString(0, 15, _str)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("oem_info.oem2", "OEM String 2", val)
|
|
rs.set_apply_callback(do_nothing, _settings)
|
|
oem_grp.append(rs)
|
|
_str = _decode(self._memobj.oem_info.version)
|
|
val = RadioSettingValueString(0, 15, _str)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("oem_info.version", "Software Version", val)
|
|
rs.set_apply_callback(do_nothing, _settings)
|
|
oem_grp.append(rs)
|
|
_str = _decode(self._memobj.oem_info.date)
|
|
val = RadioSettingValueString(0, 15, _str)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("oem_info.date", "OEM Date", val)
|
|
rs.set_apply_callback(do_nothing, _settings)
|
|
oem_grp.append(rs)
|
|
|
|
return group
|
|
|
|
def get_settings(self):
|
|
try:
|
|
return self._get_settings()
|
|
except:
|
|
import traceback
|
|
LOG.error("Failed to parse settings: %s", traceback.format_exc())
|
|
return None
|
|
|
|
def set_settings(self, settings):
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
if "." in element.get_name():
|
|
bits = element.get_name().split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = self._memobj.settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("Using apply callback")
|
|
element.run_apply_callback()
|
|
else:
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
if self._is_freq(element):
|
|
setattr(obj, setting, int(element.value)/10)
|
|
else:
|
|
setattr(obj, setting, element.value)
|
|
except Exception, e:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
def _is_freq(self, element):
|
|
return "rxfreq" in element.get_name() or "txoffset" in element.get_name() or "rx_start" in element.get_name() or "rx_stop" in element.get_name() or "tx_start" in element.get_name() or "tx_stop" in element.get_name()
|
