|
# Copyright 2013 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import os
|
|
import struct
|
|
import time
|
|
import logging
|
|
|
|
from chirp import bitwise
|
|
from chirp import chirp_common
|
|
from chirp import directory
|
|
from chirp import errors
|
|
from chirp import memmap
|
|
from chirp import util
|
|
from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \
|
|
RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \
|
|
RadioSettingValueInteger
|
|
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
STEPS = [2.5, 5.0, 10.0, 12.5, 20.0, 25.0, 30.0, 50.0, 100.0]
|
|
|
|
_mem_format = """
|
|
#seekto 0x0100;
|
|
struct {
|
|
u8 even_unknown:2,
|
|
even_pskip:1,
|
|
even_skip:1,
|
|
odd_unknown:2,
|
|
odd_pskip:1,
|
|
odd_skip:1;
|
|
} flags[379];
|
|
"""
|
|
|
|
# NOTE: The "#seekto 0x0700;" below used to be 0x0280, but I had to change it to get the settings to work for the Powerwerx DB-750X.
|
|
# I don't know if it was just wrong before, or if 0x0280 is the correct location for the settings in the other make/model variants.
|
|
# I do know that the get_settings in the PowerwerxDB750XRadio class variant was overridden to nothing for some reason, which prevented the settings from being displayed/edited.
|
|
# // Craig K6NNL <craig@k6nnl.com>
|
|
|
|
mem_format = _mem_format + """
|
|
struct memory {
|
|
bbcd freq[4];
|
|
bbcd offset[4];
|
|
u8 unknownA:4,
|
|
tune_step:4;
|
|
u8 rxdcsextra:1,
|
|
txdcsextra:1,
|
|
rxinv:1,
|
|
txinv:1,
|
|
channel_width:2,
|
|
unknownB:2;
|
|
u8 unknown8:3,
|
|
is_am:1,
|
|
power:2,
|
|
duplex:2;
|
|
u8 unknown4:4,
|
|
rxtmode:2,
|
|
txtmode:2;
|
|
u8 unknown5:2,
|
|
txtone:6;
|
|
u8 unknown6:2,
|
|
rxtone:6;
|
|
u8 txcode;
|
|
u8 rxcode;
|
|
u8 unknown7[2];
|
|
u8 unknown2[5];
|
|
char name[7];
|
|
u8 unknownZ[2];
|
|
};
|
|
|
|
#seekto 0x0030;
|
|
struct {
|
|
char serial[16];
|
|
} serial_no;
|
|
|
|
#seekto 0x0050;
|
|
struct {
|
|
char date[16];
|
|
} version;
|
|
|
|
#seekto 0x0700;
|
|
struct {
|
|
u8 unknown1:6,
|
|
display:2;
|
|
u8 unknown2[5];
|
|
u8 red;
|
|
u8 green;
|
|
u8 blue;
|
|
u8 unknownAfterRBG[3];
|
|
u8 unknown3:3,
|
|
apo:5;
|
|
u8 unknown4a[2];
|
|
u8 unknown4b:6,
|
|
mute:2;
|
|
u8 unknownBeforeLocked:2,
|
|
locked:1,
|
|
unknownAfterLocked:5;
|
|
u8 unknown5:5,
|
|
beep:1,
|
|
unknown6:2;
|
|
u8 unknown7[3];
|
|
u8 keya;
|
|
u8 keyb;
|
|
u8 keyc;
|
|
u8 keyd;
|
|
u8 unknown8[455];
|
|
char welcome[8];
|
|
|
|
} settings;
|
|
|
|
|
|
|
|
#seekto 0x0540;
|
|
struct memory memblk1[12];
|
|
|
|
#seekto 0x2000;
|
|
struct memory memory[758];
|
|
|
|
#seekto 0x7ec0;
|
|
struct memory memblk2[10];
|
|
"""
|
|
|
|
|
|
class FlagObj(object):
|
|
def __init__(self, flagobj, which):
|
|
self._flagobj = flagobj
|
|
self._which = which
|
|
|
|
def _get(self, flag):
|
|
return getattr(self._flagobj, "%s_%s" % (self._which, flag))
|
|
|
|
def _set(self, flag, value):
|
|
return setattr(self._flagobj, "%s_%s" % (self._which, flag), value)
|
|
|
|
def get_skip(self):
|
|
return self._get("skip")
|
|
|
|
def set_skip(self, value):
|
|
self._set("skip", value)
|
|
|
|
skip = property(get_skip, set_skip)
|
|
|
|
def get_pskip(self):
|
|
return self._get("pskip")
|
|
|
|
def set_pskip(self, value):
|
|
self._set("pskip", value)
|
|
|
|
pskip = property(get_pskip, set_pskip)
|
|
|
|
def set(self):
|
|
self._set("unknown", 3)
|
|
self._set("skip", 1)
|
|
self._set("pskip", 1)
|
|
|
|
def clear(self):
|
|
self._set("unknown", 0)
|
|
self._set("skip", 0)
|
|
self._set("pskip", 0)
|
|
|
|
def get(self):
|
|
return (self._get("unknown") << 2 |
|
|
self._get("skip") << 1 |
|
|
self._get("pskip"))
|
|
|
|
def __repr__(self):
|
|
return repr(self._flagobj)
|
|
|
|
|
|
def _is_loc_used(memobj, loc):
|
|
return memobj.flags[loc / 2].get_raw() != "\xFF"
|
|
|
|
|
|
def _addr_to_loc(addr):
|
|
return (addr - 0x2000) / 32
|
|
|
|
|
|
def _should_send_addr(memobj, addr):
|
|
if addr < 0x2000 or addr >= 0x7EC0:
|
|
return True
|
|
else:
|
|
return _is_loc_used(memobj, _addr_to_loc(addr))
|
|
|
|
|
|
def _echo_write(radio, data):
|
|
try:
|
|
radio.pipe.write(data)
|
|
radio.pipe.read(len(data))
|
|
except Exception, e:
|
|
LOG.error("Error writing to radio: %s" % e)
|
|
raise errors.RadioError("Unable to write to radio")
|
|
|
|
|
|
def _read(radio, length):
|
|
try:
|
|
data = radio.pipe.read(length)
|
|
except Exception, e:
|
|
LOG.error("Error reading from radio: %s" % e)
|
|
raise errors.RadioError("Unable to read from radio")
|
|
|
|
if len(data) != length:
|
|
LOG.error("Short read from radio (%i, expected %i)" %
|
|
(len(data), length))
|
|
LOG.debug(util.hexprint(data))
|
|
raise errors.RadioError("Short read from radio")
|
|
return data
|
|
|
|
valid_model = ['QX588UV', 'HR-2040', 'DB-50M\x00', 'DB-750X']
|
|
|
|
|
|
def _ident(radio):
|
|
radio.pipe.timeout = 1
|
|
_echo_write(radio, "PROGRAM")
|
|
response = radio.pipe.read(3)
|
|
if response != "QX\x06":
|
|
LOG.debug("Response was:\n%s" % util.hexprint(response))
|
|
raise errors.RadioError("Unsupported model or bad connection")
|
|
_echo_write(radio, "\x02")
|
|
response = radio.pipe.read(16)
|
|
LOG.debug(util.hexprint(response))
|
|
if response[1:8] not in valid_model:
|
|
LOG.debug("Response was:\n%s" % util.hexprint(response))
|
|
raise errors.RadioError("Unsupported model")
|
|
|
|
|
|
def _finish(radio):
|
|
endframe = "\x45\x4E\x44"
|
|
_echo_write(radio, endframe)
|
|
result = radio.pipe.read(1)
|
|
if result != "\x06":
|
|
LOG.debug("Got:\n%s" % util.hexprint(result))
|
|
raise errors.RadioError("Radio did not finish cleanly")
|
|
|
|
|
|
def _checksum(data):
|
|
cs = 0
|
|
for byte in data:
|
|
cs += ord(byte)
|
|
return cs % 256
|
|
|
|
|
|
def _send(radio, cmd, addr, length, data=None):
|
|
frame = struct.pack(">cHb", cmd, addr, length)
|
|
if data:
|
|
frame += data
|
|
frame += chr(_checksum(frame[1:]))
|
|
frame += "\x06"
|
|
_echo_write(radio, frame)
|
|
LOG.debug("Sent:\n%s" % util.hexprint(frame))
|
|
if data:
|
|
result = radio.pipe.read(1)
|
|
if result != "\x06":
|
|
LOG.debug("Ack was: %s" % repr(result))
|
|
raise errors.RadioError(
|
|
"Radio did not accept block at %04x" % addr)
|
|
return
|
|
result = _read(radio, length + 6)
|
|
LOG.debug("Got:\n%s" % util.hexprint(result))
|
|
header = result[0:4]
|
|
data = result[4:-2]
|
|
ack = result[-1]
|
|
if ack != "\x06":
|
|
LOG.debug("Ack was: %s" % repr(ack))
|
|
raise errors.RadioError("Radio NAK'd block at %04x" % addr)
|
|
_cmd, _addr, _length = struct.unpack(">cHb", header)
|
|
if _addr != addr or _length != _length:
|
|
LOG.debug("Expected/Received:")
|
|
LOG.debug(" Length: %02x/%02x" % (length, _length))
|
|
LOG.debug(" Addr: %04x/%04x" % (addr, _addr))
|
|
raise errors.RadioError("Radio send unexpected block")
|
|
cs = _checksum(result[1:-2])
|
|
if cs != ord(result[-2]):
|
|
LOG.debug("Calculated: %02x" % cs)
|
|
LOG.debug("Actual: %02x" % ord(result[-2]))
|
|
raise errors.RadioError("Block at 0x%04x failed checksum" % addr)
|
|
return data
|
|
|
|
|
|
def _download(radio):
|
|
_ident(radio)
|
|
|
|
memobj = None
|
|
|
|
data = ""
|
|
for start, end in radio._ranges:
|
|
for addr in range(start, end, 0x10):
|
|
if memobj is not None and not _should_send_addr(memobj, addr):
|
|
block = "\xFF" * 0x10
|
|
else:
|
|
block = _send(radio, 'R', addr, 0x10)
|
|
data += block
|
|
|
|
status = chirp_common.Status()
|
|
status.cur = len(data)
|
|
status.max = end
|
|
status.msg = "Cloning from radio"
|
|
radio.status_fn(status)
|
|
|
|
if addr == 0x19F0:
|
|
memobj = bitwise.parse(_mem_format, data)
|
|
|
|
_finish(radio)
|
|
|
|
return memmap.MemoryMap(data)
|
|
|
|
|
|
def _upload(radio):
|
|
_ident(radio)
|
|
|
|
for start, end in radio._ranges:
|
|
for addr in range(start, end, 0x10):
|
|
if addr < 0x0100:
|
|
continue
|
|
if not _should_send_addr(radio._memobj, addr):
|
|
continue
|
|
block = radio._mmap[addr:addr + 0x10]
|
|
_send(radio, 'W', addr, len(block), block)
|
|
|
|
status = chirp_common.Status()
|
|
status.cur = addr
|
|
status.max = end
|
|
status.msg = "Cloning to radio"
|
|
radio.status_fn(status)
|
|
|
|
_finish(radio)
|
|
|
|
|
|
TONES = [62.5] + list(chirp_common.TONES)
|
|
TMODES = ['', 'Tone', 'DTCS', '']
|
|
DUPLEXES = ['', '-', '+', '']
|
|
MODES = ["FM", "FM", "NFM"]
|
|
POWER_LEVELS = [chirp_common.PowerLevel("High", watts=50),
|
|
chirp_common.PowerLevel("Mid1", watts=25),
|
|
chirp_common.PowerLevel("Mid2", watts=10),
|
|
chirp_common.PowerLevel("Low", watts=5)]
|
|
|
|
|
|
@directory.register
|
|
class AnyTone5888UVRadio(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
"""AnyTone 5888UV"""
|
|
VENDOR = "AnyTone"
|
|
MODEL = "5888UV"
|
|
BAUD_RATE = 9600
|
|
_file_ident = "QX588UV"
|
|
|
|
# May try to mirror the OEM behavior later
|
|
_ranges = [
|
|
(0x0000, 0x8000),
|
|
]
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = ("The Anytone driver is currently experimental. "
|
|
"There are no known issues with it, but you should "
|
|
"proceed with caution.")
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_cross = True
|
|
rf.has_tuning_step = False
|
|
rf.valid_tuning_steps = STEPS
|
|
rf.has_rx_dtcs = True
|
|
rf.valid_skips = ["", "S", "P"]
|
|
rf.valid_modes = ["FM", "NFM", "AM"]
|
|
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
|
|
rf.valid_cross_modes = ['Tone->DTCS', 'DTCS->Tone',
|
|
'->Tone', '->DTCS', 'Tone->Tone']
|
|
rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES
|
|
rf.valid_bands = [(108000000, 500000000)]
|
|
rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-"
|
|
rf.valid_name_length = 7
|
|
rf.valid_power_levels = POWER_LEVELS
|
|
rf.memory_bounds = (1, 758)
|
|
return rf
|
|
|
|
def sync_in(self):
|
|
self._mmap = _download(self)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
_upload(self)
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(mem_format, self._mmap)
|
|
|
|
def _get_memobjs(self, number):
|
|
number -= 1
|
|
_mem = self._memobj.memory[number]
|
|
_flg = FlagObj(self._memobj.flags[number / 2],
|
|
number % 2 and "even" or "odd")
|
|
return _mem, _flg
|
|
|
|
def _get_dcs_index(self, _mem, which):
|
|
base = getattr(_mem, '%scode' % which)
|
|
extra = getattr(_mem, '%sdcsextra' % which)
|
|
return (int(extra) << 8) | int(base)
|
|
|
|
def _set_dcs_index(self, _mem, which, index):
|
|
base = getattr(_mem, '%scode' % which)
|
|
extra = getattr(_mem, '%sdcsextra' % which)
|
|
base.set_value(index & 0xFF)
|
|
extra.set_value(index >> 8)
|
|
|
|
def get_raw_memory(self, number):
|
|
_mem, _flg = self._get_memobjs(number)
|
|
return repr(_mem) + repr(_flg)
|
|
|
|
def get_memory(self, number):
|
|
_mem, _flg = self._get_memobjs(number)
|
|
mem = chirp_common.Memory()
|
|
mem.number = number
|
|
|
|
if _flg.get() == 0x0F:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.freq) * 100
|
|
mem.offset = int(_mem.offset) * 100
|
|
mem.name = str(_mem.name).rstrip()
|
|
mem.duplex = DUPLEXES[_mem.duplex]
|
|
mem.mode = _mem.is_am and "AM" or MODES[_mem.channel_width]
|
|
|
|
rxtone = txtone = None
|
|
rxmode = TMODES[_mem.rxtmode]
|
|
txmode = TMODES[_mem.txtmode]
|
|
if txmode == "Tone":
|
|
txtone = TONES[_mem.txtone]
|
|
elif txmode == "DTCS":
|
|
txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,
|
|
'tx')]
|
|
if rxmode == "Tone":
|
|
rxtone = TONES[_mem.rxtone]
|
|
elif rxmode == "DTCS":
|
|
rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,
|
|
'rx')]
|
|
|
|
rxpol = _mem.rxinv and "R" or "N"
|
|
txpol = _mem.txinv and "R" or "N"
|
|
|
|
chirp_common.split_tone_decode(mem,
|
|
(txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol))
|
|
|
|
mem.skip = _flg.get_skip() and "S" or _flg.get_pskip() and "P" or ""
|
|
mem.power = POWER_LEVELS[_mem.power]
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
_mem, _flg = self._get_memobjs(mem.number)
|
|
if mem.empty:
|
|
_flg.set()
|
|
return
|
|
_flg.clear()
|
|
_mem.set_raw("\x00" * 32)
|
|
|
|
_mem.freq = mem.freq / 100
|
|
_mem.offset = mem.offset / 100
|
|
_mem.name = mem.name.ljust(7)
|
|
_mem.is_am = mem.mode == "AM"
|
|
_mem.duplex = DUPLEXES.index(mem.duplex)
|
|
|
|
try:
|
|
_mem.channel_width = MODES.index(mem.mode)
|
|
except ValueError:
|
|
_mem.channel_width = 0
|
|
|
|
((txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
|
|
|
|
_mem.txtmode = TMODES.index(txmode)
|
|
_mem.rxtmode = TMODES.index(rxmode)
|
|
if txmode == "Tone":
|
|
_mem.txtone = TONES.index(txtone)
|
|
elif txmode == "DTCS":
|
|
self._set_dcs_index(_mem, 'tx',
|
|
chirp_common.ALL_DTCS_CODES.index(txtone))
|
|
if rxmode == "Tone":
|
|
_mem.rxtone = TONES.index(rxtone)
|
|
elif rxmode == "DTCS":
|
|
self._set_dcs_index(_mem, 'rx',
|
|
chirp_common.ALL_DTCS_CODES.index(rxtone))
|
|
|
|
_mem.txinv = txpol == "R"
|
|
_mem.rxinv = rxpol == "R"
|
|
|
|
_flg.set_skip(mem.skip == "S")
|
|
_flg.set_pskip(mem.skip == "P")
|
|
|
|
if mem.power:
|
|
_mem.power = POWER_LEVELS.index(mem.power)
|
|
else:
|
|
_mem.power = 0
|
|
|
|
def get_settings(self):
|
|
_settings = self._memobj.settings
|
|
basic_group = RadioSettingGroup("basic_group", "Basic Settings")
|
|
audio_group = RadioSettingGroup("audio_group", "Audio Options")
|
|
keys_group = RadioSettingGroup("keys_group", "Programmable Keys")
|
|
display_group = RadioSettingGroup("display_group", "Display Options")
|
|
settings = RadioSettings(basic_group, audio_group, keys_group, display_group)
|
|
|
|
############ Basic Group
|
|
|
|
rs = RadioSetting("locked", "Keypad locked",
|
|
RadioSettingValueBoolean(_settings.locked))
|
|
basic_group.append(rs)
|
|
|
|
|
|
|
|
display = ["Frequency", "Channel", "Name"]
|
|
rs = RadioSetting("display", "Memory Display",
|
|
RadioSettingValueList(display, display[_settings.display]))
|
|
basic_group.append(rs)
|
|
|
|
|
|
|
|
apo = ["Off"] + ['%.1f hour(s)' % (0.5 * x) for x in range(1, 25)]
|
|
rs = RadioSetting("apo", "Automatic Power Off",
|
|
RadioSettingValueList(apo, apo[_settings.apo]))
|
|
basic_group.append(rs)
|
|
|
|
|
|
############ Audio Group
|
|
|
|
rs = RadioSetting("beep", "Beep Enabled",
|
|
RadioSettingValueBoolean(_settings.beep))
|
|
audio_group.append(rs)
|
|
|
|
mute = ["Off", "TX", "RX", "TX/RX"]
|
|
rs = RadioSetting("mute", "Sub Band Mute",
|
|
RadioSettingValueList(mute, mute[_settings.mute]))
|
|
audio_group.append(rs)
|
|
|
|
|
|
############ Keys Group
|
|
|
|
progkey = ["Off", "RPTR offset direction", "PRI priority", "LOW power", "TONE", "MHZ", "REV", "HOME", "MAIN A/B", "VFO/MR", "SCAN", "SQLOFF/ON", "TBST tone burst", "CALLOUT", "COMP Compander on/off", "SCR scrambler on/off", "TONEDEC", "Wide/Nar", "TALK-around"]
|
|
rs = RadioSetting("keya", "Programmable Key A",
|
|
RadioSettingValueList(progkey, progkey[_settings.keya]))
|
|
keys_group.append(rs)
|
|
rs = RadioSetting("keyb", "Programmable Key B",
|
|
RadioSettingValueList(progkey, progkey[_settings.keyb]))
|
|
keys_group.append(rs)
|
|
rs = RadioSetting("keyc", "Programmable Key C",
|
|
RadioSettingValueList(progkey, progkey[_settings.keyc]))
|
|
keys_group.append(rs)
|
|
rs = RadioSetting("keyd", "Programmable Key D",
|
|
RadioSettingValueList(progkey, progkey[_settings.keyd]))
|
|
keys_group.append(rs)
|
|
|
|
############ Display Group
|
|
|
|
def filter(s):
|
|
s_ = ""
|
|
for i in range(0, 8):
|
|
c = str(s[i])
|
|
s_ += (c if c in chirp_common.CHARSET_ASCII else "")
|
|
return s_
|
|
rs = RadioSetting("welcome", "Welcome Message",
|
|
RadioSettingValueString(0, 8, filter(_settings.welcome)))
|
|
display_group.append(rs)
|
|
|
|
rs = RadioSetting("red", "Background Brightness: Red",
|
|
RadioSettingValueInteger(0,31,_settings.red))
|
|
display_group.append(rs)
|
|
rs = RadioSetting("green", "Background Brightness: Green",
|
|
RadioSettingValueInteger(0,31,_settings.green))
|
|
display_group.append(rs)
|
|
rs = RadioSetting("blue", "Background Brightness: Blue",
|
|
RadioSettingValueInteger(0,31,_settings.blue))
|
|
display_group.append(rs)
|
|
|
|
|
|
return settings
|
|
|
|
def set_settings(self, settings):
|
|
_settings = self._memobj.settings
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
name = element.get_name()
|
|
setattr(_settings, name, element.value)
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
return cls._file_ident in filedata[0x20:0x40]
|
|
|
|
|
|
@directory.register
|
|
class IntekHR2040Radio(AnyTone5888UVRadio):
|
|
"""Intek HR-2040"""
|
|
VENDOR = "Intek"
|
|
MODEL = "HR-2040"
|
|
_file_ident = "HR-2040"
|
|
|
|
|
|
@directory.register
|
|
class PolmarDB50MRadio(AnyTone5888UVRadio):
|
|
"""Polmar DB-50M"""
|
|
VENDOR = "Polmar"
|
|
MODEL = "DB-50M"
|
|
_file_ident = "DB-50M"
|
|
|
|
|
|
@directory.register
|
|
class PowerwerxDB750XRadio(AnyTone5888UVRadio):
|
|
"""Powerwerx DB-750X"""
|
|
VENDOR = "Powerwerx"
|
|
MODEL = "DB-750X"
|
|
_file_ident = "DB-750X"
|
|
|
|
# def get_settings(self):
|
|
# return {}
|
