|
# Copyright 2016-2023:
|
|
# Jim Unroe KC9HI, <rock.unroe@gmail.com>
|
|
# Rick DeWitt (RJD), <aa0rd@yahoo.com>
|
|
# Mark Hartong, AJ4YI <mark.hartong@verizon.net>
|
|
# Mark Hartong, AJ4YI <mark.hartong@verizon.net>
|
|
# Jim Unroe, KC9HI <rock.unroe@gmail.com>
|
|
#
|
|
# New model for TRI PRC-148
|
|
# Michael, m@ilovecode.dk
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import struct
|
|
import logging
|
|
|
|
from chirp import chirp_common, directory, memmap
|
|
from chirp import bitwise, errors, util
|
|
|
|
from chirp.settings import RadioSettingGroup, RadioSetting, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueString, RadioSettingValueInteger, \
|
|
RadioSettingValueFloat, RadioSettings, InvalidValueError
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0200;
|
|
struct {
|
|
u8 init_bank; // determines which VFO is primary A or B
|
|
u8 volume; // not used BJ-318, band volume is controlled vfo u8 bvol
|
|
u16 fm_freq; // not used BJ-318, freq is controlled hello_lims u16 fm_318
|
|
u8 wtled; // not used BJ-318
|
|
u8 rxled; // not used BJ-318
|
|
u8 txled; // not used BJ-318
|
|
u8 ledsw;
|
|
u8 beep;
|
|
u8 ring;
|
|
u8 bcl;
|
|
u8 tot;
|
|
u16 sig_freq;
|
|
u16 dtmf_txms;
|
|
u8 init_sql; // not used BJ-318, band squelch is controlled vfo u8 sql
|
|
u8 rptr_mode;
|
|
u8 unknown1;
|
|
u8 vol_sw; // 0 = Potentio, 1 = Elec
|
|
u8 speaker; // 0 = Inside, 1 = External
|
|
u8 mic_type; // 0 = cap, 1 = Dyn
|
|
} settings;
|
|
|
|
#seekto 0x0240;
|
|
struct {
|
|
u8 dtmf1_cnt;
|
|
u8 dtmf1[7];
|
|
u8 dtmf2_cnt;
|
|
u8 dtmf2[7];
|
|
u8 dtmf3_cnt;
|
|
u8 dtmf3[7];
|
|
u8 dtmf4_cnt;
|
|
u8 dtmf4[7];
|
|
u8 dtmf5_cnt;
|
|
u8 dtmf5[7];
|
|
u8 dtmf6_cnt;
|
|
u8 dtmf6[7];
|
|
u8 dtmf7_cnt;
|
|
u8 dtmf7[7];
|
|
u8 dtmf8_cnt;
|
|
u8 dtmf8[7];
|
|
} dtmf_tab;
|
|
|
|
#seekto 0x0280;
|
|
struct {
|
|
u8 native_id_cnt;
|
|
u8 native_id_code[7];
|
|
u8 master_id_cnt;
|
|
u8 master_id_code[7];
|
|
u8 alarm_cnt;
|
|
u8 alarm_code[5];
|
|
u8 id_disp_cnt;
|
|
u8 id_disp_code[5];
|
|
u8 revive_cnt;
|
|
u8 revive_code[5];
|
|
u8 stun_cnt;
|
|
u8 stun_code[5];
|
|
u8 kill_cnt;
|
|
u8 kill_code[5];
|
|
u8 monitor_cnt;
|
|
u8 monitor_code[5];
|
|
u8 state_now;
|
|
} codes;
|
|
|
|
#seekto 0x02d0;
|
|
struct {
|
|
u8 hello1_cnt; // not used in BJ-318, is set in memory map
|
|
char hello1[7]; // not used in BJ-318, is set in memory map
|
|
u8 hello2_cnt; // not used in BJ-318, is set in memory map
|
|
char hello2[7]; // not used in BJ-318, is set in memory map
|
|
u32 vhf_low;
|
|
u32 vhf_high;
|
|
u32 uhf_low;
|
|
u32 uhf_high;
|
|
u8 lims_on; // first byte @ at address 0x02f0;
|
|
} hello_lims;
|
|
|
|
struct vfo {
|
|
u8 frq_chn_mode;
|
|
u8 chan_num;
|
|
u32 rxfreq;
|
|
u16 is_rxdigtone:1,
|
|
rxdtcs_pol:1,
|
|
rx_tone:14;
|
|
u8 rx_mode;
|
|
u8 unknown_ff;
|
|
u16 is_txdigtone:1,
|
|
txdtcs_pol:1,
|
|
tx_tone:14;
|
|
u8 launch_sig;
|
|
u8 tx_end_sig;
|
|
u8 bpower; // sets power Hi=02h, Medium=01h, Low=00
|
|
// sets power for entire vfo band
|
|
u8 fm_bw;
|
|
u8 cmp_nder;
|
|
u8 scrm_blr;
|
|
u8 shift;
|
|
u32 offset;
|
|
u16 step;
|
|
u8 sql; // squelch for entire vfo band
|
|
// integer values 0 (low) to 9 (high)
|
|
};
|
|
|
|
#seekto 0x0300;
|
|
struct {
|
|
struct vfo vfoa;
|
|
} upper;
|
|
|
|
#seekto 0x0380;
|
|
struct {
|
|
struct vfo vfob;
|
|
} lower;
|
|
|
|
struct mem {
|
|
u32 rxfreq;
|
|
u16 is_rxdigtone:1,
|
|
rxdtcs_pol:1,
|
|
rxtone:14;
|
|
u8 recvmode;
|
|
u32 txfreq;
|
|
u16 is_txdigtone:1,
|
|
txdtcs_pol:1,
|
|
txtone:14;
|
|
u8 botsignal;
|
|
u8 eotsignal;
|
|
u8 power:1, // binary value for
|
|
// individual channel power
|
|
// set to "High" or "Low"
|
|
// BJ-318 band power overrides any
|
|
// individual channel power setting
|
|
wide:1,
|
|
compander:1,
|
|
scrambler:1,
|
|
unknown:4;
|
|
u8 namelen;
|
|
u8 name[7];
|
|
};
|
|
|
|
#seekto 0x0400;
|
|
struct mem upper_memory[128];
|
|
|
|
#seekto 0x1000;
|
|
struct mem lower_memory[128];
|
|
|
|
#seekto 0x2160;
|
|
struct {
|
|
char mod_num[6];
|
|
} mod_id;
|
|
"""
|
|
MEM_SIZE = 0x2160
|
|
BLOCK_SIZE = 0x40
|
|
STIMEOUT = 2
|
|
BAUD_RATE = 19200
|
|
|
|
LIST_RECVMODE = ["QT ( CTCSS )", "QT+ANI ( CTCSS+individual code )"]
|
|
LIST_SIGNAL = ["Off"] + ["DTMF%s" % x for x in range(1, 9)] + \
|
|
["DTMF%s + Identity" % x for x in range(1, 9)] + \
|
|
["Identity code"]
|
|
LIST_BPOWER = ["Low", "Mid", "High"] # Tri-power models
|
|
LIST_LEDSW = ["Off", "Auto"]
|
|
LIST_RING = ["Off"] + ["%s" % x for x in range(1, 10)]
|
|
LIST_TDR_DEF = ["A-Upper", "B-Lower"]
|
|
LIST_TIMEOUT = ["0"] + ["%s" % x for x in range(30, 600, 30)]
|
|
LIST_VFOMODE = ["Frequency Mode", "Channel Mode"]
|
|
# Tones are numeric, Defined in \chirp\chirp_common.py
|
|
TONES_CTCSS = sorted(chirp_common.TONES)
|
|
# Converted to strings
|
|
LIST_CTCSS = ["Off"] + [str(x) for x in TONES_CTCSS]
|
|
# Now append the DxxxN and DxxxI DTCS codes from chirp_common
|
|
for x in chirp_common.DTCS_CODES:
|
|
LIST_CTCSS.append("D{:03d}N".format(x))
|
|
for x in chirp_common.DTCS_CODES:
|
|
LIST_CTCSS.append("D{:03d}R".format(x))
|
|
LIST_BW = ["Narrow", "Wide"]
|
|
LIST_SHIFT = ["Off", " + ", " - "]
|
|
STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0]
|
|
LIST_STEPS = [str(x) for x in STEPS]
|
|
LIST_STATE = ["Normal", "Stun", "Kill"]
|
|
LIST_SSF = ["1000", "1450", "1750", "2100"]
|
|
LIST_DTMFTX = ["50", "100", "150", "200", "300", "500"]
|
|
|
|
## TRI-148 Specific options
|
|
LIST_VOL = ["Electron", "Potentiometer"]
|
|
LIST_SPEAKER = ["Inside", "External"]
|
|
LIST_MIC_TYPE = ["CAP", "DYN"]
|
|
|
|
|
|
def _clean_buffer(radio):
|
|
radio.pipe.timeout = 0.005
|
|
junk = radio.pipe.read(256)
|
|
radio.pipe.timeout = STIMEOUT
|
|
if junk:
|
|
LOG.debug("Got %i bytes of junk before starting" % len(junk))
|
|
|
|
|
|
def _rawrecv(radio, amount):
|
|
"""Raw read from the radio device"""
|
|
data = b""
|
|
try:
|
|
data = radio.pipe.read(amount)
|
|
except:
|
|
_exit_program_mode(radio)
|
|
msg = "Generic error reading data from radio; check your cable."
|
|
raise errors.RadioError(msg)
|
|
|
|
if len(data) != amount:
|
|
_exit_program_mode(radio)
|
|
msg = "Error reading from radio: not the amount of data we want."
|
|
raise errors.RadioError(msg)
|
|
|
|
return data
|
|
|
|
|
|
def _rawsend(radio, data):
|
|
"""Raw send to the radio device"""
|
|
try:
|
|
radio.pipe.write(data)
|
|
except:
|
|
raise errors.RadioError("Error sending data to radio")
|
|
|
|
|
|
def _make_frame(cmd, addr, length, data=""):
|
|
"""Pack the info in the header format"""
|
|
frame = struct.pack(">4sHH", cmd, addr, length)
|
|
# Add the data if set
|
|
if len(data) != 0:
|
|
frame += data
|
|
# Return the data
|
|
return frame
|
|
|
|
|
|
def _recv(radio, addr, length):
|
|
"""Get data from the radio """
|
|
|
|
data = _rawrecv(radio, length)
|
|
|
|
# DEBUG
|
|
LOG.info("Response:")
|
|
LOG.debug(util.hexprint(data))
|
|
|
|
return data
|
|
|
|
|
|
def _do_ident(radio):
|
|
"""Put the radio in PROGRAM mode & identify it"""
|
|
# Set the serial discipline
|
|
radio.pipe.baudrate = BAUD_RATE
|
|
radio.pipe.parity = "N"
|
|
radio.pipe.timeout = STIMEOUT
|
|
|
|
# Flush input buffer
|
|
_clean_buffer(radio)
|
|
|
|
magic = b"PROM_LIN"
|
|
|
|
_rawsend(radio, magic)
|
|
|
|
ack = _rawrecv(radio, 1)
|
|
if ack != b"\x06":
|
|
_exit_program_mode(radio)
|
|
if ack:
|
|
LOG.debug(repr(ack))
|
|
raise errors.RadioError("Radio did not respond")
|
|
|
|
return True
|
|
|
|
|
|
def _exit_program_mode(radio):
|
|
endframe = b"EXIT"
|
|
_rawsend(radio, endframe)
|
|
|
|
|
|
def _download(radio):
|
|
"""Get the memory map"""
|
|
|
|
# Put radio in program mode and identify it
|
|
_do_ident(radio)
|
|
|
|
# UI progress
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = MEM_SIZE // BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
radio.status_fn(status)
|
|
|
|
data = b""
|
|
for addr in range(0, MEM_SIZE, BLOCK_SIZE):
|
|
frame = _make_frame(b"READ", addr, BLOCK_SIZE)
|
|
# DEBUG
|
|
LOG.info("Request sent:")
|
|
LOG.debug(util.hexprint(frame))
|
|
|
|
# Sending the read request
|
|
_rawsend(radio, frame)
|
|
|
|
# Now we read
|
|
d = _recv(radio, addr, BLOCK_SIZE)
|
|
|
|
# Aggregate the data
|
|
data += d
|
|
|
|
# UI Update
|
|
status.cur = addr // BLOCK_SIZE
|
|
status.msg = "Cloning from radio..."
|
|
radio.status_fn(status)
|
|
|
|
_exit_program_mode(radio)
|
|
|
|
return data
|
|
|
|
|
|
def _upload(radio):
|
|
"""Upload procedure"""
|
|
|
|
# Put radio in program mode and identify it
|
|
_do_ident(radio)
|
|
|
|
# UI progress
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = MEM_SIZE // BLOCK_SIZE
|
|
status.msg = "Cloning to radio..."
|
|
radio.status_fn(status)
|
|
|
|
# The fun starts here
|
|
for addr in range(0, MEM_SIZE, BLOCK_SIZE):
|
|
# Sending the data
|
|
data = radio.get_mmap()[addr:addr + BLOCK_SIZE]
|
|
|
|
frame = _make_frame(b"WRIE", addr, BLOCK_SIZE, data)
|
|
|
|
_rawsend(radio, frame)
|
|
|
|
# Receiving the response
|
|
ack = _rawrecv(radio, 1)
|
|
if ack != b"\x06":
|
|
_exit_program_mode(radio)
|
|
msg = "Bad ack writing block 0x%04x" % addr
|
|
raise errors.RadioError(msg)
|
|
|
|
# UI Update
|
|
status.cur = addr // BLOCK_SIZE
|
|
status.msg = "Cloning to radio..."
|
|
radio.status_fn(status)
|
|
|
|
_exit_program_mode(radio)
|
|
|
|
|
|
def model_match(cls, data):
|
|
"""Match the opened/downloaded image to the correct version"""
|
|
if len(data) == 0x1C08:
|
|
rid = data[0x1C00:0x1C08]
|
|
return rid.startswith(cls.MODEL.encode())
|
|
else:
|
|
return False
|
|
|
|
|
|
def _split(rf, f1, f2):
|
|
"""Returns False if the two freqs are in the same band (no split)
|
|
or True otherwise"""
|
|
|
|
# Determine if the two freqs are in the same band
|
|
for low, high in rf.valid_bands:
|
|
if f1 >= low and f1 <= high and \
|
|
f2 >= low and f2 <= high:
|
|
# If the two freqs are on the same Band this is not a split
|
|
return False
|
|
|
|
# If you get here is because the freq pairs are split
|
|
return True
|
|
|
|
@directory.register
|
|
class TRI148(chirp_common.CloneModeRadio,
|
|
chirp_common.ExperimentalRadio):
|
|
"""TRI - Triumph Instrument PRC-148"""
|
|
VENDOR = "TRI - Triumph Instrument"
|
|
MODEL = "PRC-148"
|
|
MODES = ["NFM", "FM"]
|
|
TONES = chirp_common.TONES
|
|
DTCS_CODES = tuple(sorted(chirp_common.DTCS_CODES + (645,)))
|
|
DTMF_CHARS = list("0123456789ABCD*#")
|
|
|
|
VALID_BANDS = [(106000000, 135995000),
|
|
(136000000, 176000000),
|
|
(400000000, 470000000)]
|
|
|
|
# Valid chars on the LCD
|
|
NAME_LENGTH = 7
|
|
VALID_CHARS = chirp_common.CHARSET_UPPER_NUMERIC.replace(" ", "") + "#*_-"
|
|
#VALID_CHARS = VALID_CHARS.replace(" ", "")
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
if cls.MODEL == "PRC-148":
|
|
msg = \
|
|
('\n'
|
|
'The individual PRC-148 channel power settings set in CHIRP'
|
|
' are ignored by the radio.\n'
|
|
'While the CHIRP driver will allow setting \n'
|
|
'\n')
|
|
|
|
rp.info = msg
|
|
|
|
rp.pre_download = _(
|
|
"Follow this instructions to download your info:\n"
|
|
"1 - Turn off your radio\n"
|
|
"2 - Connect your interface cable\n"
|
|
"3 - Turn on your radio\n"
|
|
"4 - Do the download of your radio data\n")
|
|
rp.pre_upload = _(
|
|
"Follow this instructions to upload your info:\n"
|
|
"1 - Turn off your radio\n"
|
|
"2 - Connect your interface cable\n"
|
|
"3 - Turn on your radio\n"
|
|
"4 - Do the upload of your radio data\n")
|
|
return rp
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_tuning_step = False
|
|
rf.can_odd_split = True
|
|
rf.has_name = True
|
|
rf.has_offset = True
|
|
rf.has_mode = True
|
|
rf.has_dtcs = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_dtcs_polarity = True
|
|
rf.has_ctone = True
|
|
rf.has_cross = True
|
|
rf.has_sub_devices = self.VARIANT == ""
|
|
rf.valid_modes = self.MODES
|
|
rf.valid_characters = self.VALID_CHARS
|
|
rf.valid_duplexes = ["", "-", "+", "off"]
|
|
rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross']
|
|
rf.valid_cross_modes = [
|
|
"Tone->Tone",
|
|
"DTCS->",
|
|
"->DTCS",
|
|
"Tone->DTCS",
|
|
"DTCS->Tone",
|
|
"->Tone",
|
|
"DTCS->DTCS"]
|
|
rf.valid_skips = []
|
|
rf.valid_power_levels = LIST_BPOWER
|
|
rf.valid_name_length = self.NAME_LENGTH
|
|
rf.valid_dtcs_codes = self.DTCS_CODES
|
|
rf.valid_bands = self.VALID_BANDS
|
|
rf.memory_bounds = (1, 128)
|
|
rf.valid_tuning_steps = STEPS
|
|
return rf
|
|
|
|
def get_sub_devices(self):
|
|
return [TRI148Upper(self._mmap), TRI148Lower(self._mmap)]
|
|
|
|
def sync_in(self):
|
|
"""Download from radio"""
|
|
try:
|
|
data = _download(self)
|
|
except errors.RadioError:
|
|
# Pass through any real errors we raise
|
|
raise
|
|
except:
|
|
# If anything unexpected happens, make sure we raise
|
|
# a RadioError and log the problem
|
|
LOG.exception('Unexpected error during download')
|
|
raise errors.RadioError('Unexpected error communicating '
|
|
'with the radio')
|
|
self._mmap = memmap.MemoryMapBytes(data)
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
"""Upload to radio"""
|
|
try:
|
|
_upload(self)
|
|
except:
|
|
# If anything unexpected happens, make sure we raise
|
|
# a RadioError and log the problem
|
|
LOG.exception('Unexpected error during upload')
|
|
raise errors.RadioError('Unexpected error communicating '
|
|
'with the radio')
|
|
|
|
def process_mmap(self):
|
|
"""Process the mem map into the mem object"""
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number - 1])
|
|
|
|
def _memory_obj(self, suffix=""):
|
|
return getattr(self._memobj, "%s_memory%s" % (self._vfo, suffix))
|
|
|
|
def _get_dcs(self, val):
|
|
return int(str(val)[2:-18])
|
|
|
|
def _set_dcs(self, val):
|
|
return int(str(val), 16)
|
|
|
|
def get_memory(self, number):
|
|
_mem = self._memory_obj()[number - 1]
|
|
|
|
mem = chirp_common.Memory()
|
|
mem.number = number
|
|
|
|
if _mem.get_raw(asbytes=False)[0] == "\xff":
|
|
mem.empty = True
|
|
return mem
|
|
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
|
|
if _mem.txfreq == 0xFFFFFFFF:
|
|
# TX freq not set
|
|
mem.duplex = "off"
|
|
mem.offset = 0
|
|
elif int(_mem.rxfreq) == int(_mem.txfreq):
|
|
mem.duplex = ""
|
|
mem.offset = 0
|
|
elif _split(self.get_features(), mem.freq, int(_mem.txfreq) * 10):
|
|
mem.duplex = "split"
|
|
mem.offset = int(_mem.txfreq) * 10
|
|
else:
|
|
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
|
|
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
|
|
|
|
for char in _mem.name[0:_mem.namelen]:
|
|
mem.name += chr(char)
|
|
|
|
dtcs_pol = ["N", "N"]
|
|
|
|
if _mem.rxtone in [0x3FFF, 0x0000]:
|
|
rxmode = ""
|
|
elif _mem.is_rxdigtone == 0:
|
|
# CTCSS
|
|
rxmode = "Tone"
|
|
mem.ctone = int(_mem.rxtone) / 10.0
|
|
else:
|
|
# Digital
|
|
rxmode = "DTCS"
|
|
mem.rx_dtcs = self._get_dcs(_mem.rxtone)
|
|
if _mem.rxdtcs_pol == 1:
|
|
dtcs_pol[1] = "R"
|
|
|
|
if _mem.txtone in [0x3FFF, 0x0000]:
|
|
txmode = ""
|
|
elif _mem.is_txdigtone == 0:
|
|
# CTCSS
|
|
txmode = "Tone"
|
|
mem.rtone = int(_mem.txtone) / 10.0
|
|
else:
|
|
# Digital
|
|
txmode = "DTCS"
|
|
mem.dtcs = self._get_dcs(_mem.txtone)
|
|
if _mem.txdtcs_pol == 1:
|
|
dtcs_pol[0] = "R"
|
|
|
|
if txmode == "Tone" and not rxmode:
|
|
mem.tmode = "Tone"
|
|
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
|
|
mem.tmode = "TSQL"
|
|
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
|
|
mem.tmode = "DTCS"
|
|
elif rxmode or txmode:
|
|
mem.tmode = "Cross"
|
|
mem.cross_mode = "%s->%s" % (txmode, rxmode)
|
|
|
|
mem.dtcs_polarity = "".join(dtcs_pol)
|
|
|
|
mem.mode = _mem.wide and "FM" or "NFM"
|
|
|
|
mem.power = LIST_BPOWER[_mem.power]
|
|
|
|
# Extra
|
|
mem.extra = RadioSettingGroup("extra", "Extra")
|
|
|
|
if _mem.recvmode == 0xFF:
|
|
val = 0x00
|
|
else:
|
|
val = _mem.recvmode
|
|
recvmode = RadioSetting("recvmode", "Receiving mode",
|
|
RadioSettingValueList(LIST_RECVMODE,
|
|
LIST_RECVMODE[val]))
|
|
mem.extra.append(recvmode)
|
|
|
|
if _mem.botsignal == 0xFF:
|
|
val = 0x00
|
|
else:
|
|
val = _mem.botsignal
|
|
botsignal = RadioSetting("botsignal", "Launch signaling",
|
|
RadioSettingValueList(LIST_SIGNAL,
|
|
LIST_SIGNAL[val]))
|
|
mem.extra.append(botsignal)
|
|
|
|
if _mem.eotsignal == 0xFF:
|
|
val = 0x00
|
|
else:
|
|
val = _mem.eotsignal
|
|
|
|
rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[val])
|
|
eotsignal = RadioSetting("eotsignal", "Transmit end signaling", rx)
|
|
mem.extra.append(eotsignal)
|
|
|
|
rx = RadioSettingValueBoolean(bool(_mem.compander))
|
|
compander = RadioSetting("compander", "Compander", rx)
|
|
mem.extra.append(compander)
|
|
|
|
rx = RadioSettingValueBoolean(bool(_mem.scrambler))
|
|
scrambler = RadioSetting("scrambler", "Scrambler", rx)
|
|
mem.extra.append(scrambler)
|
|
|
|
return mem
|
|
|
|
def set_memory(self, mem):
|
|
_mem = self._memory_obj()[mem.number - 1]
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\xff" * 24)
|
|
_mem.namelen = 0
|
|
return
|
|
|
|
_mem.set_raw("\xFF" * 15 + "\x00\x00" + "\xFF" * 7)
|
|
|
|
_mem.rxfreq = mem.freq / 10
|
|
if mem.duplex == "off":
|
|
_mem.txfreq = 0xFFFFFFFF
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = mem.offset / 10
|
|
elif mem.duplex == "+":
|
|
_mem.txfreq = (mem.freq + mem.offset) / 10
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = (mem.freq - mem.offset) / 10
|
|
else:
|
|
_mem.txfreq = mem.freq / 10
|
|
|
|
_mem.namelen = len(mem.name.rstrip())
|
|
_namelength = self.get_features().valid_name_length
|
|
for i in range(_namelength):
|
|
try:
|
|
_mem.name[i] = ord(mem.name[i])
|
|
except IndexError:
|
|
_mem.name[i] = 0xFF
|
|
|
|
rxmode = ""
|
|
txmode = ""
|
|
|
|
if mem.tmode == "Tone":
|
|
txmode = "Tone"
|
|
elif mem.tmode == "TSQL":
|
|
rxmode = "Tone"
|
|
txmode = "TSQL"
|
|
elif mem.tmode == "DTCS":
|
|
rxmode = "DTCSSQL"
|
|
txmode = "DTCS"
|
|
elif mem.tmode == "Cross":
|
|
txmode, rxmode = mem.cross_mode.split("->", 1)
|
|
|
|
if rxmode == "":
|
|
_mem.rxdtcs_pol = 1
|
|
_mem.is_rxdigtone = 1
|
|
_mem.rxtone = 0x3FFF
|
|
elif rxmode == "Tone":
|
|
_mem.rxdtcs_pol = 0
|
|
_mem.is_rxdigtone = 0
|
|
_mem.rxtone = int(mem.ctone * 10)
|
|
elif rxmode == "DTCSSQL":
|
|
_mem.rxdtcs_pol = 1 if mem.dtcs_polarity[1] == "R" else 0
|
|
_mem.is_rxdigtone = 1
|
|
_mem.rxtone = self._set_dcs(mem.dtcs)
|
|
elif rxmode == "DTCS":
|
|
_mem.rxdtcs_pol = 1 if mem.dtcs_polarity[1] == "R" else 0
|
|
_mem.is_rxdigtone = 1
|
|
_mem.rxtone = self._set_dcs(mem.rx_dtcs)
|
|
|
|
if txmode == "":
|
|
_mem.txdtcs_pol = 1
|
|
_mem.is_txdigtone = 1
|
|
_mem.txtone = 0x3FFF
|
|
elif txmode == "Tone":
|
|
_mem.txdtcs_pol = 0
|
|
_mem.is_txdigtone = 0
|
|
_mem.txtone = int(mem.rtone * 10)
|
|
elif txmode == "TSQL":
|
|
_mem.txdtcs_pol = 0
|
|
_mem.is_txdigtone = 0
|
|
_mem.txtone = int(mem.ctone * 10)
|
|
elif txmode == "DTCS":
|
|
_mem.txdtcs_pol = 1 if mem.dtcs_polarity[0] == "R" else 0
|
|
_mem.is_txdigtone = 1
|
|
_mem.txtone = self._set_dcs(mem.dtcs)
|
|
|
|
_mem.wide = self.MODES.index(mem.mode)
|
|
_mem.power = mem.power == LIST_BPOWER[1]
|
|
|
|
# Extra settings
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def get_settings(self):
|
|
"""Translate the bit in the mem_struct into settings in the UI"""
|
|
# Define mem struct write-back shortcuts
|
|
_sets = self._memobj.settings
|
|
_vfoa = self._memobj.upper.vfoa
|
|
_vfob = self._memobj.lower.vfob
|
|
_lims = self._memobj.hello_lims
|
|
_codes = self._memobj.codes
|
|
_dtmf = self._memobj.dtmf_tab
|
|
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
a_band = RadioSettingGroup("a_band", "VFO A-Upper Settings")
|
|
b_band = RadioSettingGroup("b_band", "VFO B-Lower Settings")
|
|
codes = RadioSettingGroup("codes", "Codes & DTMF Groups")
|
|
lims = RadioSettingGroup("lims", "PowerOn & Freq Limits")
|
|
group = RadioSettings(basic, a_band, b_band, lims, codes)
|
|
|
|
|
|
def my_word2raw(setting, obj, atrb, mlt=10):
|
|
"""Callback function to convert UI floating value to u16 int"""
|
|
if str(setting.value) == "Off":
|
|
frq = 0x0000
|
|
else:
|
|
frq = int(float(str(setting.value)) * float(mlt))
|
|
if frq == 0:
|
|
frq = 0x0000
|
|
setattr(obj, atrb, frq)
|
|
return
|
|
|
|
def my_adjraw(setting, obj, atrb, fix):
|
|
"""Callback: add or subtract fix from value."""
|
|
vx = int(str(setting.value))
|
|
value = vx + int(fix)
|
|
if value < 0:
|
|
value = 0
|
|
if atrb == "frq_chn_mode" and int(str(setting.value)) == 2:
|
|
value = vx * 2 # Special handling for frq_chn_mode
|
|
setattr(obj, atrb, value)
|
|
return
|
|
|
|
def my_dbl2raw(setting, obj, atrb, flg=1):
|
|
"""Callback: convert from freq 146.7600 to 14760000 U32."""
|
|
value = chirp_common.parse_freq(str(setting.value)) / 10
|
|
# flg=1 means 0 becomes ff, else leave as possible 0
|
|
if flg == 1 and value == 0:
|
|
value = 0xFFFFFFFF
|
|
setattr(obj, atrb, value)
|
|
return
|
|
|
|
def my_val_list(setting, obj, atrb):
|
|
"""Callback:from ValueList with non-sequential, actual values."""
|
|
value = int(str(setting.value)) # Get the integer value
|
|
if atrb == "tot":
|
|
value = int(value / 30) # 30 second increments
|
|
setattr(obj, atrb, value)
|
|
return
|
|
|
|
def my_spcl(setting, obj, atrb):
|
|
"""Callback: Special handling based on atrb."""
|
|
if atrb == "frq_chn_mode":
|
|
idx = LIST_VFOMODE.index(str(setting.value)) # Returns 0 or 1
|
|
value = idx * 2 # Set bit 1
|
|
setattr(obj, atrb, value)
|
|
return
|
|
|
|
def my_tone_strn(obj, is_atr, pol_atr, tone_atr):
|
|
"""Generate the CTCS/DCS tone code string."""
|
|
vx = int(getattr(obj, tone_atr))
|
|
if vx == 16383 or vx == 0:
|
|
return "Off" # 16383 is all bits set
|
|
if getattr(obj, is_atr) == 0: # Simple CTCSS code
|
|
tstr = str(vx / 10.0)
|
|
else: # DCS
|
|
if getattr(obj, pol_atr) == 0:
|
|
tstr = "D{:03x}R".format(vx)
|
|
else:
|
|
tstr = "D{:03x}N".format(vx)
|
|
return tstr
|
|
|
|
def my_set_tone(setting, obj, is_atr, pol_atr, tone_atr):
|
|
"""Callback- create the tone setting from string code."""
|
|
sx = str(setting.value) # '131.8' or 'D231N' or 'Off'
|
|
if sx == "Off":
|
|
isx = 1
|
|
polx = 1
|
|
tonx = 0x3FFF
|
|
elif sx[0] == "D": # DCS
|
|
isx = 1
|
|
if sx[4] == "N":
|
|
polx = 1
|
|
else:
|
|
polx = 0
|
|
tonx = int(sx[1:4], 16)
|
|
else: # CTCSS
|
|
isx = 0
|
|
polx = 0
|
|
tonx = int(float(sx) * 10.0)
|
|
setattr(obj, is_atr, isx)
|
|
setattr(obj, pol_atr, polx)
|
|
setattr(obj, tone_atr, tonx)
|
|
return
|
|
|
|
def my_frq(freq):
|
|
freq = int(freq * 10)
|
|
valid = False
|
|
for lo, hi in self.VALID_BANDS:
|
|
if lo <= freq <= hi:
|
|
valid = True
|
|
break
|
|
|
|
if not valid:
|
|
LOG.error("Freq not in range")
|
|
default_range = self.VALID_BANDS[2]
|
|
freq = (default_range[0] + default_range[1]) / 2
|
|
|
|
return freq / 1000000.0
|
|
|
|
# Basic Settings
|
|
bnd_mode = RadioSetting("settings.init_bank", "TDR Band Default",
|
|
RadioSettingValueList(LIST_TDR_DEF, LIST_TDR_DEF[ _sets.init_bank]))
|
|
basic.append(bnd_mode)
|
|
|
|
rs = RadioSettingValueInteger(0, 15, _sets.volume)
|
|
volume = RadioSetting("settings.volume", "Electronic volume ( Default: 10 )", rs)
|
|
basic.append(volume)
|
|
|
|
|
|
val = _sets.fm_freq / 10.0
|
|
if val == 0:
|
|
val = 88.9 # 0 is not valid
|
|
rx = RadioSettingValueFloat(65, 108.0, val, 0.1, 1)
|
|
rs = RadioSetting("settings.fm_freq", "FM Broadcast Freq (MHz)", rx)
|
|
rs.set_apply_callback(my_word2raw, _sets, "fm_freq")
|
|
basic.append(rs)
|
|
|
|
tmp = str(int(_sets.ledsw))
|
|
ledsw = RadioSetting("settings.ledsw", "LED-SW ( Back light mode )",
|
|
RadioSettingValueList(LIST_LEDSW, LIST_LEDSW[_sets.ledsw]))
|
|
basic.append(ledsw)
|
|
|
|
beep = RadioSetting("settings.beep", "BEEP ( Prompt tone )",
|
|
RadioSettingValueBoolean(bool(_sets.beep)))
|
|
basic.append(beep)
|
|
|
|
ring = RadioSetting("settings.ring", "RING ( Ring tone )",
|
|
RadioSettingValueList(LIST_RING, LIST_RING[_sets.ring])
|
|
)
|
|
basic.append(ring)
|
|
|
|
bcl = RadioSetting("settings.bcl", "BCL ( Busy channel lockout )",
|
|
RadioSettingValueBoolean(bool(_sets.bcl)))
|
|
basic.append(bcl)
|
|
|
|
tmp = str(int(_sets.tot) * 30) # 30 sec step counter
|
|
rs = RadioSetting("settings.tot", "TOT ( Transmit Timeout in Secs )",
|
|
RadioSettingValueList(LIST_TIMEOUT, tmp))
|
|
rs.set_apply_callback(my_val_list, _sets, "tot")
|
|
basic.append(rs)
|
|
|
|
tmp = str(int(_sets.sig_freq))
|
|
rs = RadioSetting("settings.sig_freq", "TONE ( Pilot carrier frequency in Hz )",
|
|
RadioSettingValueList(LIST_SSF, tmp))
|
|
rs.set_apply_callback(my_val_list, _sets, "sig_freq")
|
|
basic.append(rs)
|
|
|
|
tmp = str(int(_sets.dtmf_txms))
|
|
rs = RadioSetting("settings.dtmf_txms", "DTM-TM ( DTMF Tx Duration in mSecs )",
|
|
RadioSettingValueList(LIST_DTMFTX, tmp))
|
|
rs.set_apply_callback(my_val_list, _sets, "dtmf_txms")
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("settings.rptr_mode", "RPT ( Cross-band repeater )",
|
|
RadioSettingValueBoolean(bool(_sets.rptr_mode)))
|
|
basic.append(rs)
|
|
|
|
vol_sw = RadioSetting("settings.vol_sw", "VOL-SW ( Volume adjustment mode )",
|
|
RadioSettingValueList(LIST_VOL, LIST_VOL[_sets.vol_sw]))
|
|
basic.append(vol_sw)
|
|
|
|
speaker = RadioSetting("settings.speaker", "SPEAKER ( Speaker output select )",
|
|
RadioSettingValueList(LIST_SPEAKER, LIST_SPEAKER[_sets.speaker]))
|
|
basic.append(speaker)
|
|
|
|
mic_type = RadioSetting("settings.mic_type", "MIC_TYPE ( Microphone Type )",
|
|
RadioSettingValueList(LIST_MIC_TYPE, LIST_MIC_TYPE[_sets.mic_type]))
|
|
basic.append(mic_type)
|
|
|
|
|
|
# ******************************************************
|
|
# UPPER BAND SETTINGS
|
|
# ******************************************************
|
|
|
|
# Freq Mode, convert bit 1 state to index pointer
|
|
val = _vfoa.frq_chn_mode // 2
|
|
|
|
rx = RadioSettingValueList(LIST_VFOMODE, LIST_VFOMODE[val])
|
|
rs = RadioSetting("upper.vfoa.frq_chn_mode", "Default Mode", rx)
|
|
rs.set_apply_callback(my_spcl, _vfoa, "frq_chn_mode")
|
|
a_band.append(rs)
|
|
|
|
val = _vfoa.chan_num + 1 # Add 1 for 1-128 displayed
|
|
rs = RadioSetting("upper.vfoa.chan_num", "Initial Channel",
|
|
RadioSettingValueInteger(1, 128, val))
|
|
rs.set_apply_callback(my_adjraw, _vfoa, "chan_num", -1)
|
|
a_band.append(rs)
|
|
|
|
val = my_frq(_vfoa.rxfreq)
|
|
rs = RadioSetting("upper.vfoa.rxfreq ", "Default Recv Freq in MHz",
|
|
RadioSettingValueFloat(106.0, 470.0, val, 0.001, 5))
|
|
rs.set_apply_callback(my_dbl2raw, _vfoa, "rxfreq")
|
|
a_band.append(rs)
|
|
|
|
tmp = my_tone_strn(_vfoa, "is_rxdigtone", "rxdtcs_pol", "rx_tone")
|
|
rs = RadioSetting("rx_tone", "R-CTC ( Setting of CTCSS for receiving in Hz )",
|
|
RadioSettingValueList(LIST_CTCSS, tmp))
|
|
rs.set_apply_callback(my_set_tone, _vfoa, "is_rxdigtone", "rxdtcs_pol", "rx_tone")
|
|
a_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_RECVMODE, LIST_RECVMODE[_vfoa.rx_mode])
|
|
rs = RadioSetting("upper.vfoa.rx_mode", "R-MOD ( Default Recv Mode )", rx)
|
|
a_band.append(rs)
|
|
|
|
tmp = my_tone_strn(_vfoa, "is_txdigtone", "txdtcs_pol", "tx_tone")
|
|
rs = RadioSetting("tx_tone", "T-CTC ( Setting of CTCSS for transmit in Hz )",
|
|
RadioSettingValueList(LIST_CTCSS, tmp))
|
|
rs.set_apply_callback(my_set_tone, _vfoa, "is_txdigtone", "txdtcs_pol", "tx_tone")
|
|
a_band.append(rs)
|
|
|
|
rs = RadioSetting("upper.vfoa.launch_sig", "T-DTM1 ( Setting of dual tone multiple frequency for transmission 1 )",
|
|
RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfoa.launch_sig]))
|
|
a_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfoa.tx_end_sig])
|
|
rs = RadioSetting("upper.vfoa.tx_end_sig", "T-DTM2 ( Setting of dual tone multiple frequency for transmission 2 )", rx)
|
|
a_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_BW, LIST_BW[_vfoa.fm_bw])
|
|
rs = RadioSetting("upper.vfoa.fm_bw", "W/NA ( Selection wide of broad or narrow band )", rx)
|
|
a_band.append(rs)
|
|
|
|
rx = RadioSettingValueBoolean(bool(_vfoa.cmp_nder))
|
|
rs = RadioSetting("upper.vfoa.cmp_nder", "COMP ( Voice companding )", rx)
|
|
a_band.append(rs)
|
|
|
|
rs = RadioSetting("upper.vfoa.scrm_blr", "SRMR ( Voice encryption )",
|
|
RadioSettingValueBoolean(bool(_vfoa.scrm_blr)))
|
|
a_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[_vfoa.shift])
|
|
rs = RadioSetting("upper.vfoa.shift", "SFT ( Frequency offset setting direction )", rx)
|
|
a_band.append(rs)
|
|
|
|
val = _vfoa.offset / 100000.0
|
|
rs = RadioSetting("upper.vfoa.offset", "OFFSET ( Frequency offset range in MHz )",
|
|
RadioSettingValueFloat(0, 100.0, val, 0.001, 3))
|
|
# Allow zero value
|
|
rs.set_apply_callback(my_dbl2raw, _vfoa, "offset", 0)
|
|
a_band.append(rs)
|
|
|
|
tmp = str(_vfoa.step / 100.0)
|
|
rs = RadioSetting("step", "STEP ( Frequency step in kHz )",
|
|
RadioSettingValueList(LIST_STEPS, tmp))
|
|
rs.set_apply_callback(my_word2raw, _vfoa, "step", 100)
|
|
a_band.append(rs)
|
|
|
|
if _vfoa.sql == 0xFF:
|
|
valq = 0x04 # setting default squelch to 04
|
|
else:
|
|
valq = _vfoa.sql
|
|
sqla = RadioSetting("upper.vfoa.sql", "SQL ( Squelch level )",
|
|
RadioSettingValueInteger(0, 9, valq))
|
|
a_band.append(sqla)
|
|
|
|
val_b = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High
|
|
rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val_b])
|
|
power_u = RadioSetting("upper.vfoa.bpower", "POWER", rx)
|
|
a_band.append(power_u)
|
|
|
|
|
|
# ******************************************************
|
|
# LOWER BAND SETTINGS
|
|
# ******************************************************
|
|
|
|
# Freq Mode, convert bit 1 state to index pointer
|
|
val = _vfob.frq_chn_mode // 2
|
|
|
|
rx = RadioSettingValueList(LIST_VFOMODE, LIST_VFOMODE[val])
|
|
rs = RadioSetting("lower.vfob.frq_chn_mode", "Default Mode", rx)
|
|
rs.set_apply_callback(my_spcl, _vfob, "frq_chn_mode")
|
|
b_band.append(rs)
|
|
|
|
val = _vfob.chan_num + 1 # Add 1 for 1-128 displayed
|
|
rs = RadioSetting("lower.vfob.chan_num", "Initial Channel",
|
|
RadioSettingValueInteger(1, 128, val))
|
|
rs.set_apply_callback(my_adjraw, _vfob, "chan_num", -1)
|
|
b_band.append(rs)
|
|
|
|
val = my_frq(_vfob.rxfreq)
|
|
rs = RadioSetting("lower.vfob.rxfreq ", "Default Recv Freq in MHz",
|
|
RadioSettingValueFloat(106.0, 470.0, val, 0.001, 5))
|
|
rs.set_apply_callback(my_dbl2raw, _vfob, "rxfreq")
|
|
b_band.append(rs)
|
|
|
|
tmp = my_tone_strn(_vfob, "is_rxdigtone", "rxdtcs_pol", "rx_tone")
|
|
rs = RadioSetting("rx_tone", "R-CTC ( Setting of CTCSS for receiving in Hz )",
|
|
RadioSettingValueList(LIST_CTCSS, tmp))
|
|
rs.set_apply_callback(my_set_tone, _vfob, "is_rxdigtone", "rxdtcs_pol", "rx_tone")
|
|
b_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_RECVMODE, LIST_RECVMODE[_vfob.rx_mode])
|
|
rs = RadioSetting("lower.vfob.rx_mode", "R-MOD ( Default Recv Mode )", rx)
|
|
b_band.append(rs)
|
|
|
|
tmp = my_tone_strn(_vfob, "is_txdigtone", "txdtcs_pol", "tx_tone")
|
|
rs = RadioSetting("tx_tone", "T-CTC ( Setting of CTCSS for transmit in Hz )",
|
|
RadioSettingValueList(LIST_CTCSS, tmp))
|
|
rs.set_apply_callback(my_set_tone, _vfob, "is_txdigtone", "txdtcs_pol", "tx_tone")
|
|
b_band.append(rs)
|
|
|
|
rs = RadioSetting("lower.vfob.launch_sig", "T-DTM1 ( Setting of dual tone multiple frequency for transmission 1 )",
|
|
RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfob.launch_sig]))
|
|
b_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_SIGNAL, LIST_SIGNAL[_vfob.tx_end_sig])
|
|
rs = RadioSetting("lower.vfob.tx_end_sig", "T-DTM2 ( Setting of dual tone multiple frequency for transmission 2 )", rx)
|
|
b_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_BW, LIST_BW[_vfob.fm_bw])
|
|
rs = RadioSetting("lower.vfob.fm_bw", "W/NA ( Selection wide of broad or narrow band )", rx)
|
|
b_band.append(rs)
|
|
|
|
rx = RadioSettingValueBoolean(bool(_vfob.cmp_nder))
|
|
rs = RadioSetting("lower.vfob.cmp_nder", "COMP ( Voice companding )", rx)
|
|
b_band.append(rs)
|
|
|
|
rs = RadioSetting("lower.vfob.scrm_blr", "SRMR ( Voice encryption )",
|
|
RadioSettingValueBoolean(bool(_vfob.scrm_blr)))
|
|
b_band.append(rs)
|
|
|
|
rx = RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[_vfob.shift])
|
|
rs = RadioSetting("lower.vfob.shift", "SFT ( Frequency offset setting direction )", rx)
|
|
b_band.append(rs)
|
|
|
|
val = _vfob.offset / 100000.0
|
|
rs = RadioSetting("lower.vfob.offset", "OFFSET ( Frequency offset range in MHz )",
|
|
RadioSettingValueFloat(0, 100.0, val, 0.001, 3))
|
|
# Allow zero value
|
|
rs.set_apply_callback(my_dbl2raw, _vfob, "offset", 0)
|
|
b_band.append(rs)
|
|
|
|
tmp = str(_vfob.step / 100.0)
|
|
rs = RadioSetting("step", "STEP ( Frequency step in kHz )",
|
|
RadioSettingValueList(LIST_STEPS, tmp))
|
|
rs.set_apply_callback(my_word2raw, _vfob, "step", 100)
|
|
b_band.append(rs)
|
|
|
|
if _vfob.sql == 0xFF:
|
|
valq = 0x04 # setting default squelch to 04
|
|
else:
|
|
valq = _vfob.sql
|
|
sqlb = RadioSetting("lower.vfob.sql", "SQL ( Squelch level )",
|
|
RadioSettingValueInteger(0, 9, valq))
|
|
b_band.append(sqlb)
|
|
|
|
val_b = _vfob.bpower # 2bits values 0,1,2= Low, Mid, High
|
|
rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val_b])
|
|
power_u = RadioSetting("lower.vfob.bpower", "POWER", rx)
|
|
b_band.append(power_u)
|
|
|
|
|
|
|
|
# PowerOn & Freq Limits Settings
|
|
def chars2str(cary, knt):
|
|
"""Convert raw memory char array to a string: NOT a callback."""
|
|
stx = ""
|
|
for char in cary[0:knt]:
|
|
stx += chr(int(char))
|
|
return stx
|
|
|
|
def my_str2ary(setting, obj, atrba, atrbc):
|
|
"""Callback: convert 7-char string to char array with count."""
|
|
ary = ""
|
|
knt = 7
|
|
for j in range(6, -1, -1): # Strip trailing spaces
|
|
if str(setting.value)[j] == "" or str(setting.value)[j] == " ":
|
|
knt = knt - 1
|
|
else:
|
|
break
|
|
for j in range(0, 7, 1):
|
|
if j < knt:
|
|
ary += str(setting.value)[j]
|
|
else:
|
|
ary += chr(0xFF)
|
|
setattr(obj, atrba, ary)
|
|
setattr(obj, atrbc, knt)
|
|
return
|
|
|
|
lval = _lims.vhf_low / 100000.0
|
|
uval = _lims.vhf_high / 100000.0
|
|
if lval >= uval:
|
|
lval = 144.0
|
|
uval = 158.0
|
|
|
|
rs = RadioSetting("hello_lims.vhf_low", "Lower VHF Band Limit (MHz)",
|
|
RadioSettingValueFloat(106.0, 176.0, lval, 0.001, 3))
|
|
rs.set_apply_callback(my_dbl2raw, _lims, "vhf_low")
|
|
lims.append(rs)
|
|
|
|
rs = RadioSetting("hello_lims.vhf_high", "Upper VHF Band Limit (MHz)",
|
|
RadioSettingValueFloat(106.0, 176.0, uval, 0.001, 3))
|
|
rs.set_apply_callback(my_dbl2raw, _lims, "vhf_high")
|
|
lims.append(rs)
|
|
|
|
lval = _lims.uhf_low / 100000.0
|
|
uval = _lims.uhf_high / 100000.0
|
|
if lval >= uval:
|
|
lval = 420.0
|
|
uval = 470.0
|
|
|
|
rs = RadioSetting("hello_lims.uhf_low", "Lower UHF Band Limit (MHz)",
|
|
RadioSettingValueFloat(400.0, 490.0, lval, 0.001, 3))
|
|
rs.set_apply_callback(my_dbl2raw, _lims, "uhf_low")
|
|
lims.append(rs)
|
|
|
|
rs = RadioSetting("hello_lims.uhf_high", "Upper UHF Band Limit (MHz)",
|
|
RadioSettingValueFloat(400.0, 490.0, uval, 0.001, 3))
|
|
rs.set_apply_callback(my_dbl2raw, _lims, "uhf_high")
|
|
lims.append(rs)
|
|
|
|
# Codes and DTMF Groups Settings
|
|
|
|
def make_dtmf(ary, knt):
|
|
"""Generate the DTMF code 1-8, NOT a callback."""
|
|
tmp = ""
|
|
if knt > 0 and knt != 0xff:
|
|
for val in ary[0:knt]:
|
|
if val > 0 and val <= 9:
|
|
tmp += chr(val + 48)
|
|
elif val == 0x0a:
|
|
tmp += "0"
|
|
elif val == 0x0d:
|
|
tmp += "A"
|
|
elif val == 0x0e:
|
|
tmp += "B"
|
|
elif val == 0x0f:
|
|
tmp += "C"
|
|
elif val == 0x00:
|
|
tmp += "D"
|
|
elif val == 0x0b:
|
|
tmp += "*"
|
|
elif val == 0x0c:
|
|
tmp += "#"
|
|
else:
|
|
msg = ("Invalid Character. Must be: 0-9,A,B,C,D,*,#")
|
|
raise InvalidValueError(msg)
|
|
return tmp
|
|
|
|
def my_dtmf2raw(setting, obj, atrba, atrbc, syz=7):
|
|
"""Callback: DTMF Code; sends 5 or 7-byte string."""
|
|
draw = []
|
|
knt = syz
|
|
for j in range(syz - 1, -1, -1): # Strip trailing spaces
|
|
if str(setting.value)[j] == "" or str(setting.value)[j] == " ":
|
|
knt = knt - 1
|
|
else:
|
|
break
|
|
for j in range(0, syz):
|
|
bx = str(setting.value)[j]
|
|
obx = ord(bx)
|
|
dig = 0x0ff
|
|
if j < knt and knt > 0: # (Else) is pads
|
|
if bx == "0":
|
|
dig = 0x0a
|
|
elif bx == "A":
|
|
dig = 0x0d
|
|
elif bx == "B":
|
|
dig = 0x0e
|
|
elif bx == "C":
|
|
dig = 0x0f
|
|
elif bx == "D":
|
|
dig = 0x00
|
|
elif bx == "*":
|
|
dig = 0x0b
|
|
elif bx == "#":
|
|
dig = 0x0c
|
|
elif obx >= 49 and obx <= 57:
|
|
dig = obx - 48
|
|
else:
|
|
msg = ("Must be: 0-9,A,B,C,D,*,#")
|
|
raise InvalidValueError(msg)
|
|
# - End if/elif/else for bx
|
|
# - End if J<=knt
|
|
draw.append(dig) # Generate string of bytes
|
|
# - End for j
|
|
setattr(obj, atrba, draw)
|
|
setattr(obj, atrbc, knt)
|
|
return
|
|
|
|
tmp = make_dtmf(_codes.native_id_code, _codes.native_id_cnt)
|
|
rs = RadioSetting("codes.native_id_code", "Native ID Code",
|
|
RadioSettingValueString(0, 7, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "native_id_code",
|
|
"native_id_cnt", 7)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.master_id_code, _codes.master_id_cnt)
|
|
rs = RadioSetting("codes.master_id_code", "Master Control ID Code",
|
|
RadioSettingValueString(0, 7, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "master_id_code",
|
|
"master_id_cnt", 7)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.alarm_code, _codes.alarm_cnt)
|
|
rs = RadioSetting("codes.alarm_code", "Alarm Code",
|
|
RadioSettingValueString(0, 5, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "alarm_code",
|
|
"alarm_cnt", 5)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.id_disp_code, _codes.id_disp_cnt)
|
|
rs = RadioSetting("codes.id_disp_code", "Identify Display Code",
|
|
RadioSettingValueString(0, 5, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "id_disp_code",
|
|
"id_disp_cnt", 5)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.revive_code, _codes.revive_cnt)
|
|
rs = RadioSetting("codes.revive_code", "Revive Code",
|
|
RadioSettingValueString(0, 5, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "revive_code",
|
|
"revive_cnt", 5)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.stun_code, _codes.stun_cnt)
|
|
rs = RadioSetting("codes.stun_code", "Remote Stun Code",
|
|
RadioSettingValueString(0, 5, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "stun_code",
|
|
"stun_cnt", 5)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.kill_code, _codes.kill_cnt)
|
|
rs = RadioSetting("codes.kill_code", "Remote KILL Code",
|
|
RadioSettingValueString(0, 5, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "kill_code",
|
|
"kill_cnt", 5)
|
|
codes.append(rs)
|
|
|
|
tmp = make_dtmf(_codes.monitor_code, _codes.monitor_cnt)
|
|
rs = RadioSetting("codes.monitor_code", "Monitor Code",
|
|
RadioSettingValueString(0, 5, tmp))
|
|
rs.set_apply_callback(my_dtmf2raw, _codes, "monitor_code",
|
|
"monitor_cnt", 5)
|
|
codes.append(rs)
|
|
|
|
val = _codes.state_now
|
|
if val > 2:
|
|
val = 0
|
|
|
|
rx = RadioSettingValueList(LIST_STATE, LIST_STATE[val])
|
|
rs = RadioSetting("codes.state_now", "Current State", rx)
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf1, _dtmf.dtmf1_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf1", "DTMF1 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf1", "dtmf1_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf2, _dtmf.dtmf2_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf2", "DTMF2 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf2", "dtmf2_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf3, _dtmf.dtmf3_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf3", "DTMF3 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf3", "dtmf3_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf4, _dtmf.dtmf4_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf4", "DTMF4 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf4", "dtmf4_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf5, _dtmf.dtmf5_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf5", "DTMF5 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf5", "dtmf5_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf6, _dtmf.dtmf6_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf6", "DTMF6 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf6", "dtmf6_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf7, _dtmf.dtmf7_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf7", "DTMF7 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf7", "dtmf7_cnt")
|
|
codes.append(rs)
|
|
|
|
dtm = make_dtmf(_dtmf.dtmf8, _dtmf.dtmf8_cnt)
|
|
rs = RadioSetting("dtmf_tab.dtmf8", "DTMF8 String",
|
|
RadioSettingValueString(0, 7, dtm))
|
|
rs.set_apply_callback(my_dtmf2raw, _dtmf, "dtmf8", "dtmf8_cnt")
|
|
codes.append(rs)
|
|
|
|
return group # END get_settings()
|
|
|
|
def set_settings(self, settings):
|
|
_settings = self._memobj.settings
|
|
_mem = self._memobj
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
name = element.get_name()
|
|
if "." in name:
|
|
bits = name.split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
if "/" in bit:
|
|
bit, index = bit.split("/", 1)
|
|
index = int(index)
|
|
obj = getattr(obj, bit)[index]
|
|
else:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = _settings
|
|
setting = element.get_name()
|
|
|
|
if element.has_apply_callback():
|
|
LOG.debug("Using apply callback")
|
|
element.run_apply_callback()
|
|
elif element.value.get_mutable():
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
match_size = False
|
|
match_model = False
|
|
|
|
# Testing the file data size
|
|
if len(filedata) == MEM_SIZE + 8:
|
|
match_size = True
|
|
|
|
# Testing the firmware model fingerprint
|
|
match_model = model_match(cls, filedata)
|
|
|
|
if match_size and match_model:
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
class TRI148Upper(TRI148):
|
|
VARIANT = "Upper"
|
|
_vfo = "upper"
|
|
|
|
class TRI148Lower(TRI148):
|
|
VARIANT = "Lower"
|
|
_vfo = "lower"
|