CHIRP

# Copyright 2014 Ron Wellsted <ron@m0rnw.uk> M0RNW

#

# This program is free software: you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation, either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program. If not, see <http://www.gnu.org/licenses/>.

"""Wouxun KG-UV8D radio management module"""

import time

import logging

from chirp import util, chirp_common, bitwise, memmap, errors, directory

from chirp.settings import RadioSetting, RadioSettingGroup, \

RadioSettingValueBoolean, RadioSettingValueList, \

RadioSettingValueInteger, RadioSettingValueString, \

RadioSettings

import struct

LOG = logging.getLogger(__name__)

CMD_ID = 128

CMD_END = 129

CMD_RD = 130

CMD_WR = 131

MEM_VALID = 158

AB_LIST = ["A", "B"]

STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0, 100.0]

STEP_LIST = [str(x) for x in STEPS]

ROGER_LIST = ["Off", "BOT", "EOT", "Both"]

TIMEOUT_LIST = ["Off"] + [str(x) + "s" for x in range(15, 901, 15)]

VOX_LIST = ["Off"] + ["%s" % x for x in range(1, 10)]

BANDWIDTH_LIST = ["Narrow", "Wide"]

VOICE_LIST = ["Off", "On"]

LANGUAGE_LIST = ["Chinese", "English"]

SCANMODE_LIST = ["TO", "CO", "SE"]

PF1KEY_LIST = ["Call", "VFTX"]

PF3KEY_LIST = ["Scan", "Lamp", "Tele Alarm", "SOS-CH", "Radio", "Disable"]

WORKMODE_LIST = ["VFO", "Channel No.", "Ch. No.+Freq.", "Ch. No.+Name"]

BACKLIGHT_LIST = ["Always On"] + [str(x) + "s" for x in range(1, 21)] + \

["Always Off"]

OFFSET_LIST = ["+", "-"]

PONMSG_LIST = ["Bitmap", "Battery Volts"]

SPMUTE_LIST = ["QT", "QT+DTMF", "QT*DTMF"]

DTMFST_LIST = ["DT-ST", "ANI-ST", "DT-ANI", "Off"]

DTMF_TIMES = ["%s" % x for x in range(50, 501, 10)]

RPTSET_LIST = ["X-TWRPT", "X-DIRRPT"]

ALERTS = [1750, 2100, 1000, 1450]

ALERTS_LIST = [str(x) for x in ALERTS]

PTTID_LIST = ["BOT", "EOT", "Both"]

LIST_10 = ["Off"] + ["%s" % x for x in range(1, 11)]

SCANGRP_LIST = ["All"] + ["%s" % x for x in range(1, 11)]

SCQT_LIST = ["All", "Decoder", "Encoder"]

SMUTESET_LIST = ["Off", "Tx", "Rx", "Tx/Rx"]

POWER_LIST = ["Lo", "Hi"]

HOLD_TIMES = ["Off"] + ["%s" % x for x in range(100, 5001, 100)]

RPTMODE_LIST = ["Radio", "Repeater"]

# memory slot 0 is not used, start at 1 (so need 1000 slots, not 999)

# structure elements whose name starts with x are currently unidentified

_MEM_FORMAT = """

#seekto 0x0044;

struct {

u32 rx_start;

u32 rx_stop;

u32 tx_start;

u32 tx_stop;

} uhf_limits;

#seekto 0x0054;

struct {

u32 rx_start;

u32 rx_stop;

u32 tx_start;

u32 tx_stop;

} vhf_limits;

#seekto 0x0400;

struct {

u8 model[8];

u8 unknown[2];

u8 oem1[10];

u8 oem2[10];

u8 unknown2[8];

u8 version[10];

u8 unknown3[6];

u8 date[8];

} oem_info;

#seekto 0x0480;

struct {

u16 lower;

u16 upper;

} scan_groups[10];

#seekto 0x0500;

struct {

u8 call_code[6];

} call_groups[20];

#seekto 0x0580;

struct {

char call_name[6];

} call_group_name[20];

#seekto 0x0800;

struct {

u8 ponmsg;

char dispstr[15];

u8 x0810;

u8 x0811;

u8 x0812;

u8 x0813;

u8 x0814;

u8 voice;

u8 timeout;

u8 toalarm;

u8 channel_menu;

u8 power_save;

u8 autolock;

u8 keylock;

u8 beep;

u8 stopwatch;

u8 vox;

u8 scan_rev;

u8 backlight;

u8 roger_beep;

u8 mode_sw_pwd[6];

u8 reset_pwd[6];

u16 pri_ch;

u8 ani_sw;

u8 ptt_delay;

u8 ani[6];

u8 dtmf_st;

u8 bcl_a;

u8 bcl_b;

u8 ptt_id;

u8 prich_sw;

u8 rpt_set;

u8 rpt_spk;

u8 rpt_ptt;

u8 alert;

u8 pf1_func;

u8 pf3_func;

u8 workmode_b;

u8 workmode_a;

u8 x0845;

u8 dtmf_tx_time;

u8 dtmf_interval;

u8 main_ab;

u16 work_cha;

u16 work_chb;

u8 x084d;

u8 x084e;

u8 x084f;

u8 x0850;

u8 x0851;

u8 x0852;

u8 x0853;

u8 x0854;

u8 rpt_mode;

u8 language;

u8 x0857;

u8 x0858;

u8 x0859;

u8 x085a;

u8 x085b;

u8 x085c;

u8 x085d;

u8 x085e;

u8 single_display;

u8 ring_time;

u8 scg_a;

u8 scg_b;

u8 x0863;

u8 rpt_tone;

u8 rpt_hold;

u8 scan_det;

u8 sc_qt;

u8 x0868;

u8 smuteset;

u8 callcode;

} settings;

#seekto 0x0880;

struct {

u32 rxfreq;

u32 txoffset;

u16 rxtone;

u16 txtone;

u8 unknown1:6,

power:1,

unknown2:1;

u8 unknown3:1,

shift_dir:2,

unknown4:2,

mute_mode:2,

iswide:1;

u8 step;

u8 squelch;

} vfoa;

#seekto 0x08c0;

struct {

u32 rxfreq;

u32 txoffset;

u16 rxtone;

u16 txtone;

u8 unknown1:6,

power:1,

unknown2:1;

u8 unknown3:1,

shift_dir:2,

unknown4:2,

mute_mode:2,

iswide:1;

u8 step;

u8 squelch;

} vfob;

#seekto 0x0900;

struct {

u32 rxfreq;

u32 txfreq;

u16 rxtone;

u16 txtone;

u8 unknown1:6,

power:1,

unknown2:1;

u8 unknown3:2,

scan_add:1,

unknown4:2,

mute_mode:2,

iswide:1;

u16 padding;

} memory[1000];

#seekto 0x4780;

struct {

u8 name[8];

} names[1000];

#seekto 0x6700;

u8 valid[1000];

"""

# Support for the Wouxun KG-UV8D radio

# Serial coms are at 19200 baud

# The data is passed in variable length records

# Record structure:

# Offset Usage

# 0 start of record (\x7d)

# 1 Command (\x80 Identify \x81 End/Reboot \x82 Read \x83 Write)

# 2 direction (\xff PC-> Radio, \x00 Radio -> PC)

# 3 length of payload (excluding header/checksum) (n)

# 4 payload (n bytes)

# 4+n+1 checksum - byte sum (% 256) of bytes 1 -> 4+n

#

# Memory Read Records:

# the payload is 3 bytes, first 2 are offset (big endian),

# 3rd is number of bytes to read

# Memory Write Records:

# the maximum payload size (from the Wouxun software) seems to be 66 bytes

# (2 bytes location + 64 bytes data).

@directory.register

class KGUV8DRadio(chirp_common.CloneModeRadio,

chirp_common.ExperimentalRadio):

"""Wouxun KG-UV8D"""

VENDOR = "Wouxun"

MODEL = "KG-UV8D"

_model = b"KG-UV8D"

_file_ident = b"KGUV8D"

BAUD_RATE = 19200

POWER_LEVELS = [chirp_common.PowerLevel("L", watts=1),

chirp_common.PowerLevel("H", watts=5)]

NEEDS_COMPAT_SERIAL = False

_record_start = 0x7D

def _checksum(self, data):

cs = 0

for byte in data:

cs += byte

return cs % 256

def _write_record(self, cmd, payload=None):

# build the packet

_length = 0

if payload:

_length = len(payload)

_packet = struct.pack('BBBB', self._record_start, cmd, 0xFF, _length)

if payload:

# add the chars to the packet

_packet += payload

# calculate and add the checksum to the packet

_packet += bytes([self._checksum(_packet[1:])])

LOG.debug("Sent:\n%s" % util.hexprint(_packet))

self.pipe.write(_packet)

def _read_record(self):

# read 4 chars for the header

_header = self.pipe.read(4)

if len(_header) != 4:

raise errors.RadioError('Radio did not respond')

_length = struct.unpack('xxxB', _header)[0]

_packet = self.pipe.read(_length)

_cs = self._checksum(_header[1:])

_cs += self._checksum(_packet)

_cs %= 256

_rcs = self.pipe.read(1)[0]

LOG.debug("_cs =%x", _cs)

LOG.debug("_rcs=%x", _rcs)

return (_rcs != _cs, _packet)

# Identify the radio

#

# A Gotcha: the first identify packet returns a bad checksum, subsequent

# attempts return the correct checksum... (well it does on my radio!)

#

# The ID record returned by the radio also includes the current frequency range

# as 4 bytes big-endian in 10 Hz increments

#

# Offset

# 0:10 Model, zero padded (Use first 7 chars for 'KG-UV8D')

# 11:14 UHF rx lower limit (in units of 10 Hz)

# 15:18 UHF rx upper limit

# 19:22 UHF tx lower limit

# 23:26 UHF tx upper limit

# 27:30 VHF rx lower limit

# 31:34 VHF rx upper limit

# 35:38 VHF tx lower limit

# 39:42 VHF tx upper limit

#

@classmethod

def match_model(cls, filedata, filename):

return cls._file_ident in filedata[0x400:0x408]

def _identify(self):

"""Do the identification dance"""

for _i in range(0, 10):

self._write_record(CMD_ID)

_chksum_err, _resp = self._read_record()

LOG.debug("Got:\n%s" % util.hexprint(_resp))

if _chksum_err:

LOG.error("Checksum error: retrying ident...")

time.sleep(0.100)

continue

LOG.debug("Model %s" % util.hexprint(_resp[0:7]))

if _resp[0:7] == self._model:

return

if len(_resp) == 0:

raise Exception("Radio not responding")

else:

raise Exception("Unable to identify radio")

def _finish(self):

self._write_record(CMD_END)

def process_mmap(self):

self._memobj = bitwise.parse(_MEM_FORMAT, self._mmap)

def sync_in(self):

try:

self._mmap = self._download()

except errors.RadioError:

raise

except Exception as e:

raise errors.RadioError("Failed to communicate with radio: %s" % e)

self.process_mmap()

def sync_out(self):

self._upload()

# TODO: This is a dumb, brute force method of downloading the memory.

# it would be smarter to only load the active areas and none of

# the padding/unused areas.

def _download(self):

"""Talk to a Wouxun KG-UV8D and do a download"""

try:

self._identify()

return self._do_download(0, 32768, 64)

except errors.RadioError:

raise

except Exception as e:

LOG.exception('Unknown error during download process')

raise errors.RadioError("Failed to communicate with radio: %s" % e)

def _do_download(self, start, end, blocksize):

# allocate & fill memory

image = b""

for i in range(start, end, blocksize):

req = struct.pack('>HB', i, blocksize)

self._write_record(CMD_RD, req)

cs_error, resp = self._read_record()

if cs_error:

# TODO: probably should retry a few times here

LOG.debug(util.hexprint(resp))

raise Exception("Checksum error on read")

LOG.debug("Got:\n%s" % util.hexprint(resp))

image += resp[2:]

if self.status_fn:

status = chirp_common.Status()

status.cur = i

status.max = end

status.msg = "Cloning from radio"

self.status_fn(status)

self._finish()

return memmap.MemoryMapBytes(image)

def _upload(self):

"""Talk to a Wouxun KG-UV8D and do a upload"""

try:

self._identify()

self._do_upload(0, 32768, 64)

except errors.RadioError:

raise

except Exception as e:

raise errors.RadioError("Failed to communicate with radio: %s" % e)

return

def _do_upload(self, start, end, blocksize):

ptr = start

for i in range(start, end, blocksize):

req = struct.pack('>H', i)

chunk = self.get_mmap()[ptr:ptr + blocksize]

self._write_record(CMD_WR, req + chunk)

LOG.debug(util.hexprint(req + chunk))

cserr, ack = self._read_record()

LOG.debug(util.hexprint(ack))

j = struct.unpack('>H', ack)[0]

if cserr or j != ptr:

raise Exception("Radio did not ack block %i" % ptr)

ptr += blocksize

if self.status_fn:

status = chirp_common.Status()

status.cur = i

status.max = end

status.msg = "Cloning to radio"

self.status_fn(status)

self._finish()

def get_features(self):

# TODO: This probably needs to be setup correctly to match the true

# features of the radio

rf = chirp_common.RadioFeatures()

rf.has_settings = True

rf.has_ctone = True

rf.has_rx_dtcs = True

rf.has_cross = True

rf.has_tuning_step = False

rf.has_bank = False

rf.can_odd_split = True

rf.valid_skips = ["", "S"]

rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]

rf.valid_tuning_steps = STEPS

rf.valid_cross_modes = [

"Tone->Tone",

"Tone->DTCS",

"DTCS->Tone",

"DTCS->",

"->Tone",

"->DTCS",

"DTCS->DTCS",

]

rf.valid_modes = ["FM", "NFM"]

rf.valid_power_levels = self.POWER_LEVELS

rf.valid_name_length = 8

rf.valid_duplexes = ["", "-", "+", "split", "off"]

rf.valid_bands = [(134000000, 175000000), # supports 2m

(400000000, 520000000)] # supports 70cm

rf.valid_characters = chirp_common.CHARSET_ASCII

rf.memory_bounds = (1, 999) # 999 memories

return rf

@classmethod

def get_prompts(cls):

rp = chirp_common.RadioPrompts()

rp.experimental = ("This radio driver is currently under development. "

"There are no known issues with it, but you should "

"proceed with caution.")

return rp

def get_raw_memory(self, number):

return repr(self._memobj.memory[number])

def _get_tone(self, _mem, mem):

def _get_dcs(val):

code = int("%03o" % (val & 0x07FF))

pol = (val & 0x2000) and "R" or "N"

return code, pol

tpol = False

if _mem.txtone != 0xFFFF and (_mem.txtone & 0x4000) == 0x4000:

tcode, tpol = _get_dcs(_mem.txtone)

mem.dtcs = tcode

txmode = "DTCS"

elif _mem.txtone != 0xFFFF and _mem.txtone != 0x0:

mem.rtone = (_mem.txtone & 0x7fff) / 10.0

txmode = "Tone"

else:

txmode = ""

_mem.txtone = 0x0

rpol = False

if _mem.rxtone != 0xFFFF and (_mem.rxtone & 0x4000) == 0x4000:

rcode, rpol = _get_dcs(_mem.rxtone)

mem.rx_dtcs = rcode

rxmode = "DTCS"

elif _mem.rxtone != 0xFFFF and _mem.rxtone != 0x0:

mem.ctone = (_mem.rxtone & 0x7fff) / 10.0

rxmode = "Tone"

else:

rxmode = ""

_mem.rxtone = 0x0

if txmode == "Tone" and not rxmode:

mem.tmode = "Tone"

elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:

mem.tmode = "TSQL"

elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:

mem.tmode = "DTCS"

elif rxmode or txmode:

mem.tmode = "Cross"

mem.cross_mode = "%s->%s" % (txmode, rxmode)

# always set it even if no dtcs is used

mem.dtcs_polarity = "%s%s" % (tpol or "N", rpol or "N")

LOG.debug("Got TX %s (%i) RX %s (%i)" %

(txmode, _mem.txtone, rxmode, _mem.rxtone))

def get_memory(self, number):

_mem = self._memobj.memory[number]

_nam = self._memobj.names[number]

mem = chirp_common.Memory()

mem.number = number

_valid = self._memobj.valid[mem.number]

LOG.debug("%d %s", number, _valid == MEM_VALID)

if _valid != MEM_VALID:

mem.empty = True

return mem

else:

mem.empty = False

mem.freq = int(_mem.rxfreq) * 10

if _mem.txfreq == 0xFFFFFFFF:

# TX freq not set

mem.duplex = "off"

mem.offset = 0

elif int(_mem.rxfreq) == int(_mem.txfreq):

mem.duplex = ""

mem.offset = 0

elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000:

mem.duplex = "split"

mem.offset = int(_mem.txfreq) * 10

else:

mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"

mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10

for char in _nam.name:

if char != 0:

mem.name += chr(char)

mem.name = mem.name.rstrip()

self._get_tone(_mem, mem)

mem.skip = "" if bool(_mem.scan_add) else "S"

mem.power = self.POWER_LEVELS[_mem.power]

mem.mode = _mem.iswide and "FM" or "NFM"

return mem

def _set_tone(self, mem, _mem):

def _set_dcs(code, pol):

val = int("%i" % code, 8) + 0x4000

if pol == "R":

val += 0x2000

return val

rx_mode = tx_mode = None

rxtone = txtone = 0x0000

if mem.tmode == "Tone":

tx_mode = "Tone"

rx_mode = None

txtone = int(mem.rtone * 10) + 0x8000

elif mem.tmode == "TSQL":

rx_mode = tx_mode = "Tone"

rxtone = txtone = int(mem.ctone * 10) + 0x8000

elif mem.tmode == "DTCS":

tx_mode = rx_mode = "DTCS"

txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])

rxtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1])

elif mem.tmode == "Cross":

tx_mode, rx_mode = mem.cross_mode.split("->")

if tx_mode == "DTCS":

txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])

elif tx_mode == "Tone":

txtone = int(mem.rtone * 10) + 0x8000

if rx_mode == "DTCS":

rxtone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1])

elif rx_mode == "Tone":

rxtone = int(mem.ctone * 10) + 0x8000

_mem.rxtone = rxtone

_mem.txtone = txtone

LOG.debug("Set TX %s (%i) RX %s (%i)" %

(tx_mode, _mem.txtone, rx_mode, _mem.rxtone))

def set_memory(self, mem):

number = mem.number

_mem = self._memobj.memory[number]

_nam = self._memobj.names[number]

if mem.empty:

_mem.set_raw("\x00" * (_mem.size() // 8))

self._memobj.valid[number] = 0

self._memobj.names[number].set_raw("\x00" * (_nam.size() // 8))

return

_mem.rxfreq = int(mem.freq / 10)

if mem.duplex == "off":

_mem.txfreq = 0xFFFFFFFF

elif mem.duplex == "split":

_mem.txfreq = int(mem.offset / 10)

elif mem.duplex == "off":

for i in range(0, 4):

_mem.txfreq[i].set_raw("\xFF")

elif mem.duplex == "+":

_mem.txfreq = int(mem.freq / 10) + int(mem.offset / 10)

elif mem.duplex == "-":

_mem.txfreq = int(mem.freq / 10) - int(mem.offset / 10)

else:

_mem.txfreq = int(mem.freq / 10)

_mem.scan_add = int(mem.skip != "S")

_mem.iswide = int(mem.mode == "FM")

# set the tone

self._set_tone(mem, _mem)

# set the power

if mem.power:

_mem.power = self.POWER_LEVELS.index(mem.power)

else:

_mem.power = True

# TODO: set the correct mute mode, for now just

# set to mute mode to QT (not QT+DTMF or QT*DTMF)

_mem.mute_mode = 0

for i in range(0, len(_nam.name)):

if i < len(mem.name) and mem.name[i]:

_nam.name[i] = ord(mem.name[i])

else:

_nam.name[i] = 0x0

self._memobj.valid[mem.number] = MEM_VALID

def _get_settings(self):

_settings = self._memobj.settings

_vfoa = self._memobj.vfoa

_vfob = self._memobj.vfob

cfg_grp = RadioSettingGroup("cfg_grp", "Configuration")

vfoa_grp = RadioSettingGroup("vfoa_grp", "VFO A Settings")

vfob_grp = RadioSettingGroup("vfob_grp", "VFO B Settings")

key_grp = RadioSettingGroup("key_grp", "Key Settings")

lmt_grp = RadioSettingGroup("lmt_grp", "Frequency Limits")

oem_grp = RadioSettingGroup("oem_grp", "OEM Info")

group = RadioSettings(cfg_grp, vfoa_grp, vfob_grp,

key_grp, lmt_grp, oem_grp)

#

# Configuration Settings

#

rs = RadioSetting("channel_menu", "Menu available in channel mode",

RadioSettingValueBoolean(_settings.channel_menu))

cfg_grp.append(rs)

rs = RadioSetting("ponmsg", "Poweron message",

RadioSettingValueList(

PONMSG_LIST, PONMSG_LIST[_settings.ponmsg]))

cfg_grp.append(rs)

rs = RadioSetting("voice", "Voice Guide",

RadioSettingValueBoolean(_settings.voice))

cfg_grp.append(rs)

rs = RadioSetting("language", "Language",

RadioSettingValueList(LANGUAGE_LIST,

LANGUAGE_LIST[_settings.

language]))

cfg_grp.append(rs)

rs = RadioSetting("timeout", "Timeout Timer",

RadioSettingValueInteger(15, 900,

_settings.timeout * 15, 15))

cfg_grp.append(rs)

rs = RadioSetting("toalarm", "Timeout Alarm",

RadioSettingValueInteger(0, 10, _settings.toalarm))

cfg_grp.append(rs)

rs = RadioSetting("roger_beep", "Roger Beep",

RadioSettingValueBoolean(_settings.roger_beep))

cfg_grp.append(rs)

rs = RadioSetting("power_save", "Power save",

RadioSettingValueBoolean(_settings.power_save))

cfg_grp.append(rs)

rs = RadioSetting("autolock", "Autolock",

RadioSettingValueBoolean(_settings.autolock))

cfg_grp.append(rs)

rs = RadioSetting("keylock", "Keypad Lock",

RadioSettingValueBoolean(_settings.keylock))

cfg_grp.append(rs)

rs = RadioSetting("beep", "Keypad Beep",

RadioSettingValueBoolean(_settings.beep))

cfg_grp.append(rs)

rs = RadioSetting("stopwatch", "Stopwatch",

RadioSettingValueBoolean(_settings.stopwatch))

cfg_grp.append(rs)

rs = RadioSetting("backlight", "Backlight",

RadioSettingValueList(BACKLIGHT_LIST,

BACKLIGHT_LIST[_settings.

backlight]))

cfg_grp.append(rs)

rs = RadioSetting("dtmf_st", "DTMF Sidetone",

RadioSettingValueList(DTMFST_LIST,

DTMFST_LIST[_settings.

dtmf_st]))

cfg_grp.append(rs)

rs = RadioSetting("ani-id_sw", "ANI-ID Switch",

RadioSettingValueBoolean(_settings.ani_sw))

cfg_grp.append(rs)

rs = RadioSetting("ptt-id_delay", "PTT-ID Delay",

RadioSettingValueList(PTTID_LIST,

PTTID_LIST[_settings.ptt_id]))

cfg_grp.append(rs)

rs = RadioSetting("ring_time", "Ring Time",

RadioSettingValueList(LIST_10,

LIST_10[_settings.ring_time]))

cfg_grp.append(rs)

rs = RadioSetting("scan_rev", "Scan Mode",

RadioSettingValueList(SCANMODE_LIST,

SCANMODE_LIST[_settings.

scan_rev]))

cfg_grp.append(rs)

rs = RadioSetting("vox", "VOX",

RadioSettingValueList(LIST_10,

LIST_10[_settings.vox]))

cfg_grp.append(rs)

rs = RadioSetting("prich_sw", "Priority Channel Switch",

RadioSettingValueBoolean(_settings.prich_sw))

cfg_grp.append(rs)

rs = RadioSetting("pri_ch", "Priority Channel",

RadioSettingValueInteger(1, 999, _settings.pri_ch))

cfg_grp.append(rs)

rs = RadioSetting("rpt_mode", "Radio Mode",

RadioSettingValueList(RPTMODE_LIST,

RPTMODE_LIST[_settings.

rpt_mode]))

cfg_grp.append(rs)

rs = RadioSetting("rpt_set", "Repeater Setting",

RadioSettingValueList(RPTSET_LIST,

RPTSET_LIST[_settings.

rpt_set]))

cfg_grp.append(rs)

rs = RadioSetting("rpt_spk", "Repeater Mode Speaker",

RadioSettingValueBoolean(_settings.rpt_spk))

cfg_grp.append(rs)