|
# Quansheng UV-K5 driver (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>
|
|
# Adapted For UV-K5 EGZUMER custom software By EGZUMER, JOC2
|
|
# Re-Adapted For UV-K5 EGZUMER/F4HWN custom software By JOC2
|
|
#
|
|
# based on template.py Copyright 2012 Dan Smith <dsmith@danplanet.com>
|
|
#
|
|
#
|
|
# This is a preliminary version of a driver for the UV-K5
|
|
# It is based on my reverse engineering effort described here:
|
|
# https://github.com/sq5bpf/uvk5-reverse-engineering
|
|
#
|
|
# Warning: this driver is experimental, it may brick your radio,
|
|
# eat your lunch and mess up your configuration.
|
|
#
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
# change/ modification
|
|
#
|
|
# 2024-02-09 :section password has been commented, because the new chirp give error with int.
|
|
#
|
|
|
|
import struct
|
|
import logging
|
|
import wx
|
|
|
|
from chirp import chirp_common, directory, bitwise, memmap, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueBoolean, RadioSettingValueList, \
|
|
RadioSettingValueInteger, RadioSettingValueString, \
|
|
RadioSettings, InvalidValueError
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
# Show the obfuscated version of commands. Not needed normally, but
|
|
# might be useful for someone who is debugging a similar radio
|
|
DEBUG_SHOW_OBFUSCATED_COMMANDS = False
|
|
|
|
# Show the memory being written/received. Not needed normally, because
|
|
# this is the same information as in the packet hexdumps, but
|
|
# might be useful for someone debugging some obscure memory issue
|
|
DEBUG_SHOW_MEMORY_ACTIONS = False
|
|
|
|
# TODO: remove the driver version when it's in mainline chirp
|
|
DRIVER_VERSION = "Quansheng UV-K5/K6/5R driver ver: 2024/02/17 (c) EGZUMER + F4HWN v1.8.3"
|
|
FIRMWARE_DRIVER_VERSION_UPDATE = "https://github.com/armel/uv-k5-firmware-custom-feat-F4HWN"
|
|
CHIRP_DRIVER_VERSION_UPDATE = "https://github.com/armel/uv-k5-chirp-driver"
|
|
|
|
VALEUR_COMPILER = "ENABLE"
|
|
|
|
MEM_FORMAT = """
|
|
//#seekto 0x0000;
|
|
struct {
|
|
ul32 freq;
|
|
ul32 offset;
|
|
|
|
// 0x08
|
|
u8 rxcode;
|
|
u8 txcode;
|
|
|
|
// 0x0A
|
|
u8 txcodeflag:4,
|
|
rxcodeflag:4;
|
|
|
|
// 0x0B
|
|
u8 modulation:4,
|
|
offsetDir:4;
|
|
|
|
// 0x0C
|
|
u8 __UNUSED1:3,
|
|
busyChLockout:1,
|
|
txpower:2,
|
|
bandwidth:1,
|
|
freq_reverse:1;
|
|
|
|
// 0x0D
|
|
u8 __UNUSED2:4,
|
|
dtmf_pttid:3,
|
|
dtmf_decode:1;
|
|
|
|
// 0x0E
|
|
u8 step;
|
|
u8 scrambler;
|
|
|
|
} channel[214];
|
|
|
|
//#seekto 0xd60;
|
|
struct {
|
|
u8 is_scanlist1:1,
|
|
is_scanlist2:1,
|
|
compander:2,
|
|
is_free:1,
|
|
band:3;
|
|
} ch_attr[207];
|
|
|
|
#seekto 0xe40;
|
|
ul16 fmfreq[20];
|
|
|
|
#seekto 0xe70;
|
|
u8 call_channel;
|
|
u8 squelch;
|
|
u8 max_talk_time;
|
|
u8 noaa_autoscan;
|
|
u8 key_lock;
|
|
u8 vox_switch;
|
|
u8 vox_level;
|
|
u8 mic_gain;
|
|
|
|
|
|
u8 backlight_min:4,
|
|
backlight_max:4;
|
|
|
|
u8 channel_display_mode;
|
|
u8 crossband;
|
|
u8 battery_save;
|
|
u8 dual_watch;
|
|
u8 backlight_time;
|
|
u8 ste;
|
|
u8 freq_mode_allowed;
|
|
|
|
#seekto 0xe80;
|
|
u8 ScreenChannel_A;
|
|
u8 MrChannel_A;
|
|
u8 FreqChannel_A;
|
|
u8 ScreenChannel_B;
|
|
u8 MrChannel_B;
|
|
u8 FreqChannel_B;
|
|
u8 NoaaChannel_A;
|
|
u8 NoaaChannel_B;
|
|
|
|
#seekto 0xe90;
|
|
|
|
u8 keyM_longpress_action:7,
|
|
button_beep:1;
|
|
|
|
u8 key1_shortpress_action;
|
|
u8 key1_longpress_action;
|
|
u8 key2_shortpress_action;
|
|
u8 key2_longpress_action;
|
|
u8 scan_resume_mode;
|
|
u8 auto_keypad_lock;
|
|
u8 power_on_dispmode;
|
|
ul32 password;
|
|
|
|
#seekto 0xea0;
|
|
u8 voice;
|
|
u8 s0_level;
|
|
u8 s9_level;
|
|
|
|
#seekto 0xea8;
|
|
u8 alarm_mode;
|
|
u8 roger_beep;
|
|
u8 rp_ste;
|
|
u8 TX_VFO;
|
|
u8 Battery_type;
|
|
|
|
#seekto 0xeb0;
|
|
char logo_line1[16];
|
|
char logo_line2[16];
|
|
|
|
//#seekto 0xed0;
|
|
struct {
|
|
u8 side_tone;
|
|
char separate_code;
|
|
char group_call_code;
|
|
u8 decode_response;
|
|
u8 auto_reset_time;
|
|
u8 preload_time;
|
|
u8 first_code_persist_time;
|
|
u8 hash_persist_time;
|
|
u8 code_persist_time;
|
|
u8 code_interval_time;
|
|
u8 permit_remote_kill;
|
|
|
|
#seekto 0xee0;
|
|
char local_code[3];
|
|
#seek 5;
|
|
char kill_code[5];
|
|
#seek 3;
|
|
char revive_code[5];
|
|
#seek 3;
|
|
char up_code[16];
|
|
char down_code[16];
|
|
} dtmf;
|
|
|
|
//#seekto 0xf18;
|
|
u8 slDef;
|
|
u8 sl1PriorEnab;
|
|
u8 sl1PriorCh1;
|
|
u8 sl1PriorCh2;
|
|
u8 sl2PriorEnab;
|
|
u8 sl2PriorCh1;
|
|
u8 sl2PriorCh2;
|
|
|
|
#seekto 0xf40;
|
|
u8 int_flock;
|
|
u8 int_350tx;
|
|
u8 int_KILLED;
|
|
u8 int_200tx;
|
|
u8 int_500tx;
|
|
u8 int_350en;
|
|
u8 int_scren;
|
|
|
|
|
|
u8 backlight_on_TX_RX:2,
|
|
AM_fix:1,
|
|
mic_bar:1,
|
|
battery_text:2,
|
|
live_DTMF_decoder:1,
|
|
unknown:1;
|
|
|
|
|
|
#seekto 0xf50;
|
|
struct {
|
|
char name[16];
|
|
} channelname[200];
|
|
|
|
#seekto 0x1c00;
|
|
struct {
|
|
char name[8];
|
|
char number[3];
|
|
#seek 5;
|
|
} dtmfcontact[16];
|
|
|
|
struct {
|
|
struct {
|
|
#seekto 0x1E00;
|
|
u8 openRssiThr[10];
|
|
#seekto 0x1E10;
|
|
u8 closeRssiThr[10];
|
|
#seekto 0x1E20;
|
|
u8 openNoiseThr[10];
|
|
#seekto 0x1E30;
|
|
u8 closeNoiseThr[10];
|
|
#seekto 0x1E40;
|
|
u8 closeGlitchThr[10];
|
|
#seekto 0x1E50;
|
|
u8 openGlitchThr[10];
|
|
} sqlBand4_7;
|
|
|
|
struct {
|
|
#seekto 0x1E60;
|
|
u8 openRssiThr[10];
|
|
#seekto 0x1E70;
|
|
u8 closeRssiThr[10];
|
|
#seekto 0x1E80;
|
|
u8 openNoiseThr[10];
|
|
#seekto 0x1E90;
|
|
u8 closeNoiseThr[10];
|
|
#seekto 0x1EA0;
|
|
u8 closeGlitchThr[10];
|
|
#seekto 0x1EB0;
|
|
u8 openGlitchThr[10];
|
|
} sqlBand1_3;
|
|
|
|
#seekto 0x1EC0;
|
|
struct {
|
|
ul16 level1;
|
|
ul16 level2;
|
|
ul16 level4;
|
|
ul16 level6;
|
|
} rssiLevelsBands3_7;
|
|
|
|
struct {
|
|
ul16 level1;
|
|
ul16 level2;
|
|
ul16 level4;
|
|
ul16 level6;
|
|
} rssiLevelsBands1_2;
|
|
|
|
struct {
|
|
struct {
|
|
u8 lower;
|
|
u8 center;
|
|
u8 upper;
|
|
} low;
|
|
struct {
|
|
u8 lower;
|
|
u8 center;
|
|
u8 upper;
|
|
} mid;
|
|
struct {
|
|
u8 lower;
|
|
u8 center;
|
|
u8 upper;
|
|
} hi;
|
|
#seek 7;
|
|
} txp[7];
|
|
|
|
#seekto 0x1F40;
|
|
ul16 batLvl[6];
|
|
|
|
#seekto 0x1F50;
|
|
ul16 vox1Thr[10];
|
|
|
|
#seekto 0x1F68;
|
|
ul16 vox0Thr[10];
|
|
|
|
#seekto 0x1F80;
|
|
u8 micLevel[5];
|
|
|
|
#seekto 0x1F88;
|
|
il16 xtalFreqLow;
|
|
|
|
#seekto 0x1F8E;
|
|
u8 volumeGain;
|
|
u8 dacGain;
|
|
} cal;
|
|
|
|
|
|
#seekto 0x1FF0;
|
|
struct {
|
|
u8 ENABLE_DTMF_CALLING:1,
|
|
ENABLE_PWRON_PASSWORD:1,
|
|
ENABLE_TX1750:1,
|
|
ENABLE_ALARM:1,
|
|
ENABLE_VOX:1,
|
|
ENABLE_VOICE:1,
|
|
ENABLE_NOAA:1,
|
|
ENABLE_FMRADIO:1;
|
|
u8 __UNUSED:3,
|
|
ENABLE_AM_FIX:1,
|
|
ENABLE_BLMIN_TMP_OFF:1,
|
|
ENABLE_RAW_DEMODULATORS:1,
|
|
ENABLE_WIDE_RX:1,
|
|
ENABLE_FLASHLIGHT:1;
|
|
} BUILD_OPTIONS;
|
|
|
|
#seekto 0x1FF2;
|
|
u8 eeprom0x1ff2;
|
|
u8 eeprom0x1ff3;
|
|
u8 eeprom0x1ff4;
|
|
|
|
u8 set_futur:1,
|
|
set_met:1,
|
|
set_lck:1,
|
|
set_inv:1,
|
|
set_contrast:4;
|
|
|
|
u8 set_tot:4,
|
|
set_eot:4;
|
|
|
|
u8 set_low:4,
|
|
set_ptt:4;
|
|
|
|
u8 eeprom0x1ff8;
|
|
u8 eeprom0x1ff9;
|
|
u8 eeprom0x1ffa;
|
|
u8 eeprom0x1ffb;
|
|
u8 eeprom0x1ffc;
|
|
u8 eeprom0x1ffd;
|
|
u8 eeprom0x1ffe;
|
|
u8 eeprom0x1fff;
|
|
"""
|
|
|
|
|
|
# flags1
|
|
FLAGS1_OFFSET_NONE = 0b00
|
|
FLAGS1_OFFSET_MINUS = 0b10
|
|
FLAGS1_OFFSET_PLUS = 0b01
|
|
|
|
POWER_HIGH = 0b10
|
|
POWER_MEDIUM = 0b01
|
|
POWER_LOW = 0b00
|
|
|
|
# SET_LOW_POWER f4hwn
|
|
SET_LOW_LIST = ["125mW", "250mW", "500mW", "1W", "< 20mW"]
|
|
|
|
# SET_PTT f4hwn
|
|
SET_PTT_LIST = ["CLASSIC", "ONEPUSH"]
|
|
|
|
# SET_TOT and SET_EOT f4hwn
|
|
SET_TOT_EOT_LIST = ["OFF", "SOUND", "VISUAL", "ALL"]
|
|
|
|
# SET_OFF_ON f4hwn
|
|
SET_OFF_ON_LIST = ["OFF", "ON"]
|
|
|
|
# SET_lck f4hwn
|
|
SET_LCK_LIST = ["KEYS", "KEYS+PTT"]
|
|
|
|
# SET_MET f4hwn
|
|
SET_MET_LIST = ["TINY", "CLASSIC"]
|
|
|
|
|
|
# dtmf_flags
|
|
PTTID_LIST = ["OFF", "UP CODE", "DOWN CODE", "UP+DOWN CODE", "APOLLO QUINDAR"]
|
|
|
|
# power
|
|
UVK5_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.50),
|
|
chirp_common.PowerLevel("Med", watts=3.00),
|
|
chirp_common.PowerLevel("High", watts=5.00),
|
|
]
|
|
|
|
# scrambler
|
|
SCRAMBLER_LIST = ["OFF", "2600Hz", "2700Hz", "2800Hz", "2900Hz", "3000Hz",
|
|
"3100Hz", "3200Hz", "3300Hz", "3400Hz", "3500Hz"]
|
|
# compander
|
|
COMPANDER_LIST = ["OFF", "TX", "RX", "TX/RX"]
|
|
|
|
# rx mode
|
|
RXMODE_LIST = ["MAIN ONLY", "DUAL RX RESPOND", "CROSS BAND", "MAIN TX DUAL RX"]
|
|
|
|
# channel display mode
|
|
CHANNELDISP_LIST = ["Frequency (FREQ)", "CHANNEL NUMBER", "NAME", "Name + Frequency (NAME + FREQ)"]
|
|
|
|
# TalkTime
|
|
TALK_TIME_LIST = ["30 sec", "1 min", "2 min", "3 min", "4 min", "5 min",
|
|
"6 min", "7 min", "8 min", "9 min", "15 min"]
|
|
# Auto Keypad Lock
|
|
AUTO_KEYPAD_LOCK_LIST = ["OFF", "AUTO"]
|
|
|
|
# battery save
|
|
BATSAVE_LIST = ["OFF", "1:1", "1:2", "1:3", "1:4"]
|
|
|
|
# battery type
|
|
BATTYPE_LIST = ["1600 mAh", "2200 mAh"]
|
|
# bat txt
|
|
BAT_TXT_LIST = ["NONE", "VOLTAGE", "PERCENT"]
|
|
# Backlight auto mode
|
|
BACKLIGHT_LIST = ["OFF", "5 sec", "10 sec", "20 sec", "1 min", "2 min", "4 min",
|
|
"Always On (ON)"]
|
|
|
|
# Backlight LVL
|
|
BACKLIGHT_LVL_LIST = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10"]
|
|
|
|
# Backlight _TX_RX_LIST
|
|
BACKLIGHT_TX_RX_LIST = ["OFF", "TX", "RX", "TX/RX"]
|
|
|
|
# steps TODO: change order
|
|
STEPS = [2.5, 5, 6.25, 10, 12.5, 25, 8.33, 0.01, 0.05, 0.1, 0.25, 0.5, 1, 1.25,
|
|
9, 15, 20, 30, 50, 100, 125, 200, 250, 500]
|
|
|
|
# ctcss/dcs codes
|
|
TMODES = ["", "Tone", "DTCS", "DTCS"]
|
|
TONE_NONE = 0
|
|
TONE_CTCSS = 1
|
|
TONE_DCS = 2
|
|
TONE_RDCS = 3
|
|
|
|
|
|
CTCSS_TONES = [
|
|
67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4,
|
|
88.5, 91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9,
|
|
114.8, 118.8, 123.0, 127.3, 131.8, 136.5, 141.3, 146.2,
|
|
151.4, 156.7, 159.8, 162.2, 165.5, 167.9, 171.3, 173.8,
|
|
177.3, 179.9, 183.5, 186.2, 189.9, 192.8, 196.6, 199.5,
|
|
203.5, 206.5, 210.7, 218.1, 225.7, 229.1, 233.6, 241.8,
|
|
250.3, 254.1
|
|
]
|
|
|
|
# lifted from ft4.py
|
|
DTCS_CODES = [ # TODO: add negative codes
|
|
23, 25, 26, 31, 32, 36, 43, 47, 51, 53, 54,
|
|
65, 71, 72, 73, 74, 114, 115, 116, 122, 125, 131,
|
|
132, 134, 143, 145, 152, 155, 156, 162, 165, 172, 174,
|
|
205, 212, 223, 225, 226, 243, 244, 245, 246, 251, 252,
|
|
255, 261, 263, 265, 266, 271, 274, 306, 311, 315, 325,
|
|
331, 332, 343, 346, 351, 356, 364, 365, 371, 411, 412,
|
|
413, 423, 431, 432, 445, 446, 452, 454, 455, 462, 464,
|
|
465, 466, 503, 506, 516, 523, 526, 532, 546, 565, 606,
|
|
612, 624, 627, 631, 632, 654, 662, 664, 703, 712, 723,
|
|
731, 732, 734, 743, 754
|
|
]
|
|
|
|
# flock list extended
|
|
FLOCK_LIST = ["DEFAULT+ (137-174, 400-470 + Tx200, Tx350, Tx500)",
|
|
"FCC HAM (144-148, 420-450)",
|
|
"CE HAM (144-146, 430-440)",
|
|
"GB HAM (144-148, 430-440)",
|
|
"137-174, 400-430",
|
|
"137-174, 400-438",
|
|
"Disable All",
|
|
"Unlock All"]
|
|
|
|
SCANRESUME_LIST = ["Listen 5 seconds and resume (TIMEOUT)",
|
|
"Listen until signal disapears (CARRIER)",
|
|
"Stop scanning after receiving a signal (STOP)"]
|
|
WELCOME_LIST = ["Full screen test (FULL)", "User message (MESSAGE)", "Battery voltage (VOLTAGE)", "NONE"]
|
|
VOICE_LIST = ["OFF", "Chinese", "English"]
|
|
|
|
# ACTIVE CHANNEL
|
|
TX_VFO_LIST = ["A", "B"]
|
|
ALARMMODE_LIST = ["SITE", "TONE"]
|
|
ROGER_LIST = ["OFF", "Roger beep (ROGER)", "MDC data burst (MDC)"]
|
|
RTE_LIST = ["OFF", "100ms", "200ms", "300ms", "400ms",
|
|
"500ms", "600ms", "700ms", "800ms", "900ms", "1000ms"]
|
|
VOX_LIST = ["OFF", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10"]
|
|
|
|
MEM_SIZE = 0x2000 # size of all memory
|
|
PROG_SIZE = 0x1d00 # size of the memory that we will write
|
|
MEM_BLOCK = 0x80 # largest block of memory that we can reliably write
|
|
CAL_START = 0x1E00 # calibration memory start address
|
|
F4HWN_START =0x1FF2 # calibration F4HWN memory start address
|
|
|
|
# fm radio supported frequencies
|
|
FMMIN = 76.0
|
|
FMMAX = 108.0
|
|
|
|
# bands supported by the UV-K5
|
|
BANDS_STANDARD = {
|
|
0: [50.0, 76.0],
|
|
1: [108.0, 136.9999],
|
|
2: [137.0, 173.9999],
|
|
3: [174.0, 349.9999],
|
|
4: [350.0, 399.9999],
|
|
5: [400.0, 469.9999],
|
|
6: [470.0, 600.0]
|
|
}
|
|
|
|
BANDS_WIDE = {
|
|
0: [18.0, 108.0],
|
|
1: [108.0, 136.9999],
|
|
2: [137.0, 173.9999],
|
|
3: [174.0, 349.9999],
|
|
4: [350.0, 399.9999],
|
|
5: [400.0, 469.9999],
|
|
6: [470.0, 1300.0]
|
|
}
|
|
|
|
SCANLIST_LIST = ["None", "List1", "List2", "Both"]
|
|
SCANLIST_SELECT_LIST = ["LIST 1", "LIST 2", "All Channel (ALL)"]
|
|
|
|
DTMF_CHARS = "0123456789ABCD*# "
|
|
DTMF_CHARS_ID = "0123456789ABCDabcd"
|
|
DTMF_CHARS_KILL = "0123456789ABCDabcd"
|
|
DTMF_CHARS_UPDOWN = "0123456789ABCDabcd#* "
|
|
DTMF_CODE_CHARS = "ABCD*# "
|
|
DTMF_DECODE_RESPONSE_LIST = ["DO NOTHING", "Local ringing (RING)", "Replay response (REPLY)",
|
|
"Local ringing + reply response (BOTH)"]
|
|
|
|
KEYACTIONS_LIST = ["NONE",
|
|
"FLASHLIGHT",
|
|
"POWER",
|
|
"MONITOR",
|
|
"SCAN",
|
|
"VOX",
|
|
"ALARM",
|
|
"FM RADIO",
|
|
"1750Hz TONE",
|
|
"LOCK KEYPAD",
|
|
"Switch main VFO (SWITCH VFO)",
|
|
"Switch frequency/memory mode (VFO/MR)",
|
|
"Switch demodulation (SWITCH DEMODUL)",
|
|
"BKL_MIN_N/U",
|
|
"Change RxMode: *Main only,*Dual RX,*Cross Band,*TX Dual RX (SWITCH RX MODE)",
|
|
"SWITCH PTT",
|
|
"SWITCH WIDE NARROW"
|
|
]
|
|
|
|
MIC_GAIN_LIST = ["+1.1dB", "+4.0dB", "+8.0dB", "+12.0dB", "+15.1dB"]
|
|
|
|
|
|
def xorarr(data: bytes):
|
|
"""the communication is obfuscated using this fine mechanism"""
|
|
tbl = [22, 108, 20, 230, 46, 145, 13, 64, 33, 53, 213, 64, 19, 3, 233, 128]
|
|
ret = b""
|
|
idx = 0
|
|
for byte in data:
|
|
ret += bytes([byte ^ tbl[idx]])
|
|
idx = (idx+1) % len(tbl)
|
|
return ret
|
|
|
|
|
|
def calculate_crc16_xmodem(data: bytes):
|
|
"""
|
|
if this crc was used for communication to AND from the radio, then it
|
|
would be a measure to increase reliability.
|
|
but it's only used towards the radio, so it's for further obfuscation
|
|
"""
|
|
poly = 0x1021
|
|
crc = 0x0
|
|
for byte in data:
|
|
crc = crc ^ (byte << 8)
|
|
for _ in range(8):
|
|
crc = crc << 1
|
|
if crc & 0x10000:
|
|
crc = (crc ^ poly) & 0xFFFF
|
|
return crc & 0xFFFF
|
|
|
|
|
|
def _send_command(serport, data: bytes):
|
|
"""Send a command to UV-K5 radio"""
|
|
LOG.debug("Sending command (unobfuscated) len=0x%4.4x:\n%s",
|
|
len(data), util.hexprint(data))
|
|
|
|
crc = calculate_crc16_xmodem(data)
|
|
data2 = data + struct.pack("<H", crc)
|
|
|
|
command = struct.pack(">HBB", 0xabcd, len(data), 0) + \
|
|
xorarr(data2) + \
|
|
struct.pack(">H", 0xdcba)
|
|
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
|
|
LOG.debug("Sending command (obfuscated):\n%s", util.hexprint(command))
|
|
try:
|
|
result = serport.write(command)
|
|
except Exception as e:
|
|
raise errors.RadioError("Error writing data to radio") from e
|
|
return result
|
|
|
|
|
|
def _receive_reply(serport):
|
|
header = serport.read(4)
|
|
if len(header) != 4:
|
|
LOG.warning("Header short read: [%s] len=%i",
|
|
util.hexprint(header), len(header))
|
|
raise errors.RadioError("Header short read")
|
|
if header[0] != 0xAB or header[1] != 0xCD or header[3] != 0x00:
|
|
LOG.warning("Bad response header: %s len=%i",
|
|
util.hexprint(header), len(header))
|
|
raise errors.RadioError("Bad response header")
|
|
|
|
cmd = serport.read(int(header[2]))
|
|
if len(cmd) != int(header[2]):
|
|
LOG.warning("Body short read: [%s] len=%i",
|
|
util.hexprint(cmd), len(cmd))
|
|
raise errors.RadioError("Command body short read")
|
|
|
|
footer = serport.read(4)
|
|
|
|
if len(footer) != 4:
|
|
LOG.warning("Footer short read: [%s] len=%i",
|
|
util.hexprint(footer), len(footer))
|
|
raise errors.RadioError("Footer short read")
|
|
|
|
if footer[2] != 0xDC or footer[3] != 0xBA:
|
|
LOG.debug("Reply before bad response footer (obfuscated)"
|
|
"len=0x%4.4x:\n%s", len(cmd), util.hexprint(cmd))
|
|
LOG.warning("Bad response footer: %s len=%i",
|
|
util.hexprint(footer), len(footer))
|
|
raise errors.RadioError("Bad response footer")
|
|
|
|
if DEBUG_SHOW_OBFUSCATED_COMMANDS:
|
|
LOG.debug("Received reply (obfuscated) len=0x%4.4x:\n%s",
|
|
len(cmd), util.hexprint(cmd))
|
|
|
|
cmd2 = xorarr(cmd)
|
|
|
|
LOG.debug("Received reply (unobfuscated) len=0x%4.4x:\n%s",
|
|
len(cmd2), util.hexprint(cmd2))
|
|
|
|
return cmd2
|
|
|
|
|
|
def _getstring(data: bytes, begin, maxlen):
|
|
tmplen = min(maxlen+1, len(data))
|
|
ss = [data[i] for i in range(begin, tmplen)]
|
|
key = 0
|
|
for key, val in enumerate(ss):
|
|
if val < ord(' ') or val > ord('~'):
|
|
return ''.join(chr(x) for x in ss[0:key])
|
|
return ''
|
|
|
|
|
|
def _sayhello(serport):
|
|
hellopacket = b"\x14\x05\x04\x00\x6a\x39\x57\x64"
|
|
|
|
tries = 5
|
|
while True:
|
|
LOG.debug("Sending hello packet")
|
|
_send_command(serport, hellopacket)
|
|
rep = _receive_reply(serport)
|
|
if rep:
|
|
break
|
|
tries -= 1
|
|
if tries == 0:
|
|
LOG.warning("Failed to initialise radio")
|
|
raise errors.RadioError("Failed to initialize radio")
|
|
if rep.startswith(b'\x18\x05'):
|
|
raise errors.RadioError("Radio is in programming mode, "
|
|
"restart radio into normal mode")
|
|
firmware = _getstring(rep, 4, 24)
|
|
|
|
LOG.info("Found firmware: %s", firmware)
|
|
return firmware
|
|
|
|
|
|
def _readmem(serport, offset, length):
|
|
LOG.debug("Sending readmem offset=0x%4.4x len=0x%4.4x", offset, length)
|
|
|
|
readmem = b"\x1b\x05\x08\x00" + \
|
|
struct.pack("<HBB", offset, length, 0) + \
|
|
b"\x6a\x39\x57\x64"
|
|
_send_command(serport, readmem)
|
|
rep = _receive_reply(serport)
|
|
if DEBUG_SHOW_MEMORY_ACTIONS:
|
|
LOG.debug("readmem Received data len=0x%4.4x:\n%s",
|
|
len(rep), util.hexprint(rep))
|
|
return rep[8:]
|
|
|
|
|
|
def _writemem(serport, data, offset):
|
|
LOG.debug("Sending writemem offset=0x%4.4x len=0x%4.4x",
|
|
offset, len(data))
|
|
|
|
if DEBUG_SHOW_MEMORY_ACTIONS:
|
|
LOG.debug("writemem sent data offset=0x%4.4x len=0x%4.4x:\n%s",
|
|
offset, len(data), util.hexprint(data))
|
|
|
|
dlen = len(data)
|
|
writemem = b"\x1d\x05" + \
|
|
struct.pack("<BBHBB", dlen+8, 0, offset, dlen, 1) + \
|
|
b"\x6a\x39\x57\x64"+data
|
|
|
|
_send_command(serport, writemem)
|
|
rep = _receive_reply(serport)
|
|
|
|
LOG.debug("writemem Received data: %s len=%i",
|
|
util.hexprint(rep), len(rep))
|
|
|
|
if (rep[0] == 0x1e and
|
|
rep[4] == (offset & 0xff) and
|
|
rep[5] == (offset >> 8) & 0xff):
|
|
return True
|
|
|
|
LOG.warning("Bad data from writemem")
|
|
raise errors.RadioError("Bad response to writemem")
|
|
|
|
|
|
def _resetradio(serport):
|
|
resetpacket = b"\xdd\x05\x00\x00"
|
|
_send_command(serport, resetpacket)
|
|
|
|
|
|
def do_download(radio):
|
|
"""download eeprom from radio"""
|
|
serport = radio.pipe
|
|
serport.timeout = 0.5
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.max = MEM_SIZE
|
|
status.msg = "Downloading from radio"
|
|
radio.status_fn(status)
|
|
|
|
eeprom = b""
|
|
f = _sayhello(serport)
|
|
if f:
|
|
radio.FIRMWARE_VERSION = f
|
|
else:
|
|
raise errors.RadioError("Failed to initialize radio")
|
|
|
|
addr = 0
|
|
while addr < MEM_SIZE:
|
|
data = _readmem(serport, addr, MEM_BLOCK)
|
|
status.cur = addr
|
|
radio.status_fn(status)
|
|
|
|
if data and len(data) == MEM_BLOCK:
|
|
eeprom += data
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Memory download incomplete")
|
|
|
|
return memmap.MemoryMapBytes(eeprom)
|
|
|
|
|
|
def do_upload(radio):
|
|
"""upload configuration to radio eeprom"""
|
|
serport = radio.pipe
|
|
serport.timeout = 0.5
|
|
status = chirp_common.Status()
|
|
status.cur = 0
|
|
status.msg = "Uploading to radio"
|
|
|
|
if radio.upload_f4hwn:
|
|
status.max = MEM_SIZE-F4HWN_START
|
|
start_addr = F4HWN_START
|
|
stop_addr = MEM_SIZE
|
|
|
|
else:
|
|
if radio.upload_calibration:
|
|
status.max = F4HWN_START-CAL_START
|
|
start_addr = CAL_START
|
|
stop_addr = F4HWN_START
|
|
|
|
else:
|
|
status.max = PROG_SIZE
|
|
start_addr = 0
|
|
stop_addr = PROG_SIZE
|
|
|
|
radio.status_fn(status)
|
|
|
|
f = _sayhello(serport)
|
|
if f:
|
|
radio.FIRMWARE_VERSION = f
|
|
else:
|
|
return False
|
|
|
|
addr = start_addr
|
|
while addr < stop_addr:
|
|
dat = radio.get_mmap()[addr:addr+MEM_BLOCK]
|
|
_writemem(serport, dat, addr)
|
|
status.cur = addr - start_addr
|
|
radio.status_fn(status)
|
|
if dat:
|
|
addr += MEM_BLOCK
|
|
else:
|
|
raise errors.RadioError("Memory upload incomplete")
|
|
status.msg = "Uploaded OK"
|
|
|
|
_resetradio(serport)
|
|
|
|
return True
|
|
|
|
|
|
def min_max_def(value, min_val, max_val, default):
|
|
"""returns value if in bounds or default otherwise"""
|
|
if min_val is not None and value < min_val:
|
|
return default
|
|
if max_val is not None and value > max_val:
|
|
return default
|
|
return value
|
|
|
|
|
|
def list_def(value, lst, default):
|
|
"""return value if is in the list, default otherwise"""
|
|
if isinstance(default, str):
|
|
default = lst.index(default)
|
|
if value < 0 or value >= len(lst):
|
|
return default
|
|
return value
|
|
|
|
|
|
@directory.register
|
|
class UVK5RadioEgzumer(chirp_common.CloneModeRadio):
|
|
"""Quansheng UV-K5 (egzumer + f4hwn)"""
|
|
VENDOR = "Quansheng"
|
|
MODEL = "UV-K5 (egzumer + f4hwn)"
|
|
BAUD_RATE = 38400
|
|
NEEDS_COMPAT_SERIAL = False
|
|
FIRMWARE_VERSION = ""
|
|
|
|
# upload_calibration = False
|
|
upload_f4hwn = False
|
|
|
|
def _get_bands(self):
|
|
is_wide = self._memobj.BUILD_OPTIONS.ENABLE_WIDE_RX \
|
|
if self._memobj is not None else True
|
|
bands = BANDS_WIDE if is_wide else BANDS_STANDARD
|
|
return bands
|
|
|
|
def _find_band(self, hz):
|
|
mhz = hz/1000000.0
|
|
bands = self._get_bands()
|
|
for bnd, rng in bands.items():
|
|
if rng[0] <= mhz <= rng[1]:
|
|
return bnd
|
|
return False
|
|
|
|
def _get_vfo_channel_names(self):
|
|
"""generates VFO_CHANNEL_NAMES"""
|
|
bands = self._get_bands()
|
|
names = []
|
|
for bnd, rng in bands.items():
|
|
name = f"F{bnd + 1}({round(rng[0])}M-{round(rng[1])}M)"
|
|
names.append(name + "A")
|
|
names.append(name + "B")
|
|
return names
|
|
|
|
def _get_specials(self):
|
|
"""generates SPECIALS"""
|
|
specials = {}
|
|
for idx, name in enumerate(self._get_vfo_channel_names()):
|
|
specials[name] = 200 + idx
|
|
return specials
|
|
|
|
@classmethod
|
|
def get_prompts(cls):
|
|
rp = chirp_common.RadioPrompts()
|
|
rp.experimental = \
|
|
'This is an experimental driver for the Quansheng UV-K5. ' \
|
|
'It may harm your radio, or worse. Use at your own risk.\n\n' \
|
|
'Before attempting to do any changes please download' \
|
|
'the memory image from the radio with chirp ' \
|
|
'and keep it. This can be later used to recover the ' \
|
|
'original settings. \n\n' \
|
|
'some details are not yet implemented'
|
|
rp.pre_download = \
|
|
"1. Turn radio on.\n" \
|
|
"2. Connect cable to mic/spkr connector.\n" \
|
|
"3. Make sure connector is firmly connected.\n" \
|
|
"4. Click OK to download image from device.\n\n" \
|
|
"It may not work if you turn on the radio " \
|
|
"with the cable already attached\n"
|
|
rp.pre_upload = \
|
|
"1. Turn radio on.\n" \
|
|
"2. Connect cable to mic/spkr connector.\n" \
|
|
"3. Make sure connector is firmly connected.\n" \
|
|
"4. Click OK to upload the image to device.\n\n" \
|
|
"It may not work if you turn on the radio " \
|
|
"with the cable already attached"
|
|
return rp
|
|
|
|
# Return information about this radio's features, including
|
|
# how many memories it has, what bands it supports, etc
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_bank = False
|
|
rf.valid_dtcs_codes = DTCS_CODES
|
|
rf.has_rx_dtcs = True
|
|
rf.has_ctone = True
|
|
rf.has_settings = True
|
|
rf.has_comment = False
|
|
rf.valid_name_length = 10
|
|
rf.valid_power_levels = UVK5_POWER_LEVELS
|
|
rf.valid_special_chans = self._get_vfo_channel_names()
|
|
rf.valid_duplexes = ["", "-", "+", "off"]
|
|
|
|
steps = STEPS.copy()
|
|
steps.sort()
|
|
rf.valid_tuning_steps = steps
|
|
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
|
|
rf.valid_characters = chirp_common.CHARSET_ASCII
|
|
rf.valid_modes = ["FM", "NFM", "AM", "NAM", "USB"]
|
|
|
|
rf.valid_skips = [""]
|
|
|
|
# This radio supports memories 1-200, 201-214 are the VFO memories
|
|
rf.memory_bounds = (1, 200)
|
|
|
|
# This is what the BK4819 chip supports
|
|
# Will leave it in a comment, might be useful someday
|
|
# rf.valid_bands = [(18000000, 620000000),
|
|
# (840000000, 1300000000)
|
|
# ]
|
|
rf.valid_bands = []
|
|
bands = self._get_bands()
|
|
for _, rng in bands.items():
|
|
rf.valid_bands.append(
|
|
(int(rng[0]*1000000), int(rng[1]*1000000)))
|
|
return rf
|
|
|
|
# Do a download of the radio from the serial port
|
|
def sync_in(self):
|
|
self._mmap = do_download(self)
|
|
self.process_mmap()
|
|
|
|
# Do an upload of the radio to the serial port
|
|
def sync_out(self):
|
|
do_upload(self)
|
|
|
|
# Convert the raw byte array into a memory object structure
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
# Return a raw representation of the memory object, which
|
|
# is very helpful for development
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.channel[number-1])
|
|
|
|
def validate_memory(self, mem):
|
|
msgs = super().validate_memory(mem)
|
|
|
|
if mem.duplex == 'off':
|
|
return msgs
|
|
|
|
# find tx frequency
|
|
if mem.duplex == '-':
|
|
txfreq = mem.freq - mem.offset
|
|
elif mem.duplex == '+':
|
|
txfreq = mem.freq + mem.offset
|
|
else:
|
|
txfreq = mem.freq
|
|
|
|
# find band
|
|
band = self._find_band(txfreq)
|
|
if band is False:
|
|
msg = f"Transmit frequency {txfreq/1000000.0:.4f}MHz " \
|
|
"is not supported by this radio"
|
|
msgs.append(chirp_common.ValidationWarning(msg))
|
|
|
|
band = self._find_band(mem.freq)
|
|
if band is False:
|
|
msg = f"The frequency {mem.freq/1000000.0:%.4f}MHz " \
|
|
"is not supported by this radio"
|
|
msgs.append(chirp_common.ValidationWarning(msg))
|
|
|
|
return msgs
|
|
|
|
def _set_tone(self, mem, _mem):
|
|
((txmode, txtone, txpol),
|
|
(rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem)
|
|
|
|
if txmode == "Tone":
|
|
txtoval = CTCSS_TONES.index(txtone)
|
|
txmoval = 0b01
|
|
elif txmode == "DTCS":
|
|
txmoval = txpol == "R" and 0b11 or 0b10
|
|
txtoval = DTCS_CODES.index(txtone)
|
|
else:
|
|
txmoval = 0
|
|
txtoval = 0
|
|
|
|
if rxmode == "Tone":
|
|
rxtoval = CTCSS_TONES.index(rxtone)
|
|
rxmoval = 0b01
|
|
elif rxmode == "DTCS":
|
|
rxmoval = rxpol == "R" and 0b11 or 0b10
|
|
rxtoval = DTCS_CODES.index(rxtone)
|
|
else:
|
|
rxmoval = 0
|
|
rxtoval = 0
|
|
|
|
_mem.rxcodeflag = rxmoval
|
|
_mem.txcodeflag = txmoval
|
|
_mem.rxcode = rxtoval
|
|
_mem.txcode = txtoval
|
|
|
|
def _get_tone(self, mem, _mem):
|
|
rxtype = _mem.rxcodeflag
|
|
txtype = _mem.txcodeflag
|
|
rx_tmode = TMODES[rxtype]
|
|
tx_tmode = TMODES[txtype]
|
|
|
|
rx_tone = tx_tone = None
|
|
|
|
if tx_tmode == "Tone":
|
|
if _mem.txcode < len(CTCSS_TONES):
|
|
tx_tone = CTCSS_TONES[_mem.txcode]
|
|
else:
|
|
tx_tone = 0
|
|
tx_tmode = ""
|
|
elif tx_tmode == "DTCS":
|
|
if _mem.txcode < len(DTCS_CODES):
|
|
tx_tone = DTCS_CODES[_mem.txcode]
|
|
else:
|
|
tx_tone = 0
|
|
tx_tmode = ""
|
|
|
|
if rx_tmode == "Tone":
|
|
if _mem.rxcode < len(CTCSS_TONES):
|
|
rx_tone = CTCSS_TONES[_mem.rxcode]
|
|
else:
|
|
rx_tone = 0
|
|
rx_tmode = ""
|
|
elif rx_tmode == "DTCS":
|
|
if _mem.rxcode < len(DTCS_CODES):
|
|
rx_tone = DTCS_CODES[_mem.rxcode]
|
|
else:
|
|
rx_tone = 0
|
|
rx_tmode = ""
|
|
|
|
tx_pol = txtype == 0x03 and "R" or "N"
|
|
rx_pol = rxtype == 0x03 and "R" or "N"
|
|
|
|
chirp_common.split_tone_decode(mem, (tx_tmode, tx_tone, tx_pol),
|
|
(rx_tmode, rx_tone, rx_pol))
|
|
|
|
# Extract a high-level memory object from the low-level memory map
|
|
# This is called to populate a memory in the UI
|
|
def get_memory(self, number):
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
if isinstance(number, str):
|
|
ch_num = self._get_specials()[number]
|
|
mem.extd_number = number
|
|
else:
|
|
ch_num = number - 1
|
|
|
|
mem.number = ch_num + 1
|
|
|
|
_mem = self._memobj.channel[ch_num]
|
|
|
|
is_empty = False
|
|
# We'll consider any blank (i.e. 0MHz frequency) to be empty
|
|
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
|
|
is_empty = True
|
|
|
|
# We'll also look at the channel attributes if a memory has them
|
|
tmpscn = 0
|
|
tmp_comp = 0
|
|
if ch_num < 200:
|
|
_mem3 = self._memobj.ch_attr[ch_num]
|
|
# free memory bit
|
|
is_empty |= _mem3.is_free
|
|
# scanlists
|
|
tmpscn = _mem3.is_scanlist1 + _mem3.is_scanlist2 * 2
|
|
tmp_comp = list_def(_mem3.compander, COMPANDER_LIST, 0)
|
|
elif ch_num < 214:
|
|
att_num = 200 + int((ch_num - 200) / 2)
|
|
_mem3 = self._memobj.ch_attr[att_num]
|
|
is_empty |= _mem3.is_free
|
|
tmp_comp = list_def(_mem3.compander, COMPANDER_LIST, 0)
|
|
|
|
if is_empty:
|
|
mem.empty = True
|
|
# set some sane defaults:
|
|
mem.power = UVK5_POWER_LEVELS[2]
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
val = RadioSettingValueBoolean(False)
|
|
rs = RadioSetting("busyChLockout", "BusyCL", val)
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueBoolean(False)
|
|
rs = RadioSetting("frev", "FreqRev", val)
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueList(PTTID_LIST)
|
|
rs = RadioSetting("pttid", "PTTID", val)
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueBoolean(False)
|
|
rs = RadioSetting("dtmfdecode", "DTMF decode", val)
|
|
if self._memobj.BUILD_OPTIONS.ENABLE_DTMF_CALLING:
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueList(SCRAMBLER_LIST)
|
|
rs = RadioSetting("scrambler", "Scrambler", val)
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueList(COMPANDER_LIST)
|
|
rs = RadioSetting("compander", "Compander", val)
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueList(SCANLIST_LIST)
|
|
rs = RadioSetting("scanlists", "Scanlists", val)
|
|
mem.extra.append(rs)
|
|
|
|
# actually the step and duplex are overwritten by chirp based on
|
|
# bandplan. they are here to document sane defaults for IARU r1
|
|
# mem.tuning_step = 25.0
|
|
# mem.duplex = "off"
|
|
|
|
return mem
|
|
|
|
if ch_num > 199:
|
|
mem.name = self._get_vfo_channel_names()[ch_num-200]
|
|
mem.immutable = ["name", "scanlists"]
|
|
else:
|
|
_mem2 = self._memobj.channelname[ch_num]
|
|
for char in _mem2.name:
|
|
if str(char) == "\xFF" or str(char) == "\x00":
|
|
break
|
|
mem.name += str(char)
|
|
mem.name = mem.name.rstrip()
|
|
|
|
# Convert your low-level frequency to Hertz
|
|
mem.freq = int(_mem.freq)*10
|
|
mem.offset = int(_mem.offset)*10
|
|
|
|
if mem.offset == 0:
|
|
mem.duplex = ''
|
|
else:
|
|
if _mem.offsetDir == FLAGS1_OFFSET_MINUS:
|
|
if _mem.freq == _mem.offset:
|
|
# fake tx disable by setting tx to 0 MHz
|
|
mem.duplex = 'off'
|
|
mem.offset = 0
|
|
else:
|
|
mem.duplex = '-'
|
|
elif _mem.offsetDir == FLAGS1_OFFSET_PLUS:
|
|
mem.duplex = '+'
|
|
else:
|
|
mem.duplex = ''
|
|
|
|
# tone data
|
|
self._get_tone(mem, _mem)
|
|
|
|
# mode
|
|
temp_modes = self.get_features().valid_modes
|
|
temp_modul = _mem.modulation*2 + _mem.bandwidth
|
|
if temp_modul < len(temp_modes):
|
|
mem.mode = temp_modes[temp_modul]
|
|
elif temp_modul == 5: # USB with narrow setting
|
|
mem.mode = temp_modes[4]
|
|
elif temp_modul >= len(temp_modes):
|
|
mem.mode = "UNSUPPORTED BY CHIRP"
|
|
|
|
# tuning step
|
|
tstep = _mem.step
|
|
if tstep < len(STEPS):
|
|
mem.tuning_step = STEPS[tstep]
|
|
else:
|
|
mem.tuning_step = 2.5
|
|
|
|
# power
|
|
if _mem.txpower == POWER_HIGH:
|
|
mem.power = UVK5_POWER_LEVELS[2]
|
|
elif _mem.txpower == POWER_MEDIUM:
|
|
mem.power = UVK5_POWER_LEVELS[1]
|
|
else:
|
|
mem.power = UVK5_POWER_LEVELS[0]
|
|
|
|
# We'll consider any blank (i.e. 0MHz frequency) to be empty
|
|
if (_mem.freq == 0xffffffff) or (_mem.freq == 0):
|
|
mem.empty = True
|
|
else:
|
|
mem.empty = False
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
# BusyCL
|
|
val = RadioSettingValueBoolean(_mem.busyChLockout)
|
|
rs = RadioSetting("busyChLockout", "Busy Ch Lockout (BusyCL)", val)
|
|
mem.extra.append(rs)
|
|
|
|
# Frequency reverse
|
|
val = RadioSettingValueBoolean(_mem.freq_reverse)
|
|
rs = RadioSetting("frev", "Reverse Frequencies (R)", val)
|
|
mem.extra.append(rs)
|
|
|
|
# PTTID
|
|
pttid = list_def(_mem.dtmf_pttid, PTTID_LIST, 0)
|
|
val = RadioSettingValueList(PTTID_LIST, None, pttid)
|
|
rs = RadioSetting("pttid", "PTT ID (PTT ID)", val)
|
|
mem.extra.append(rs)
|
|
|
|
# DTMF DECODE
|
|
val = RadioSettingValueBoolean(_mem.dtmf_decode)
|
|
rs = RadioSetting("dtmfdecode", "DTMF decode (D Decd)", val)
|
|
if self._memobj.BUILD_OPTIONS.ENABLE_DTMF_CALLING:
|
|
mem.extra.append(rs)
|
|
|
|
# Scrambler
|
|
enc = list_def(_mem.scrambler, SCRAMBLER_LIST, 0)
|
|
val = RadioSettingValueList(SCRAMBLER_LIST, None, enc)
|
|
rs = RadioSetting("scrambler", "Scrambler (Scramb)", val)
|
|
mem.extra.append(rs)
|
|
|
|
# Compander
|
|
val = RadioSettingValueList(COMPANDER_LIST, None, tmp_comp)
|
|
rs = RadioSetting("compander", "Compander (Compnd)", val)
|
|
mem.extra.append(rs)
|
|
|
|
val = RadioSettingValueList(SCANLIST_LIST, None, tmpscn)
|
|
rs = RadioSetting("scanlists", "Scanlists (SList)", val)
|
|
mem.extra.append(rs)
|
|
|
|
return mem
|
|
|
|
def set_settings(self, settings):
|
|
_mem = self._memobj
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
|
|
elname = element.get_name()
|
|
|
|
# basic settings
|
|
|
|
# VFO_A e80 ScreenChannel_A
|
|
if elname == "VFO_A_chn":
|
|
_mem.ScreenChannel_A = int(element.value)
|
|
if _mem.ScreenChannel_A < 200:
|
|
_mem.MrChannel_A = _mem.ScreenChannel_A
|
|
elif _mem.ScreenChannel_A < 207:
|
|
_mem.FreqChannel_A = _mem.ScreenChannel_A
|
|
else:
|
|
_mem.NoaaChannel_A = _mem.ScreenChannel_A
|
|
|
|
# VFO_B e83
|
|
elif elname == "VFO_B_chn":
|
|
_mem.ScreenChannel_B = int(element.value)
|
|
if _mem.ScreenChannel_B < 200:
|
|
_mem.MrChannel_B = _mem.ScreenChannel_B
|
|
elif _mem.ScreenChannel_B < 207:
|
|
_mem.FreqChannel_B = _mem.ScreenChannel_B
|
|
else:
|
|
_mem.NoaaChannel_B = _mem.ScreenChannel_B
|
|
|
|
# TX_VFO channel selected A,B
|
|
elif elname == "TX_VFO":
|
|
_mem.TX_VFO = int(element.value)
|
|
|
|
# call channel
|
|
elif elname == "call_channel":
|
|
_mem.call_channel = int(element.value)
|
|
|
|
# squelch
|
|
elif elname == "squelch":
|
|
_mem.squelch = int(element.value)
|
|
|
|
# TOT
|
|
elif elname == "tot":
|
|
_mem.max_talk_time = int(element.value)
|
|
|
|
# NOAA autoscan
|
|
elif elname == "noaa_autoscan":
|
|
_mem.noaa_autoscan = int(element.value)
|
|
|
|
# VOX
|
|
elif elname == "vox":
|
|
voxvalue = int(element.value)
|
|
_mem.vox_switch = voxvalue > 0
|
|
_mem.vox_level = (voxvalue - 1) if _mem.vox_switch else 0
|
|
|
|
# mic gain
|
|
elif elname == "mic_gain":
|
|
_mem.mic_gain = int(element.value)
|
|
|
|
# Channel display mode
|
|
elif elname == "channel_display_mode":
|
|
_mem.channel_display_mode = int(element.value)
|
|
|
|
# RX Mode
|
|
elif elname == "rx_mode":
|
|
tmptxmode = int(element.value)
|
|
tmpmainvfo = _mem.TX_VFO + 1
|
|
_mem.crossband = tmpmainvfo * bool(tmptxmode & 0b10)
|
|
_mem.dual_watch = tmpmainvfo * bool(tmptxmode & 0b01)
|
|
|
|
# Battery Save
|
|
elif elname == "battery_save":
|
|
_mem.battery_save = int(element.value)
|
|
|
|
# Backlight auto mode
|
|
elif elname == "backlight_time":
|
|
_mem.backlight_time = int(element.value)
|
|
|
|
# Backlight min
|
|
elif elname == "backlight_min":
|
|
_mem.backlight_min = int(element.value)
|
|
|
|
# Backlight max
|
|
elif elname == "backlight_max":
|
|
_mem.backlight_max = int(element.value)
|
|
|
|
# Backlight TX_RX
|
|
elif elname == "backlight_on_TX_RX":
|
|
_mem.backlight_on_TX_RX = int(element.value)
|
|
# AM_fix
|
|
elif elname == "AM_fix":
|
|
_mem.AM_fix = int(element.value)
|
|
|
|
# mic_bar
|
|
elif elname == "mem.mic_bar":
|
|
_mem.mic_bar = int(element.value)
|
|
|
|
# Batterie txt
|
|
elif elname == "_mem.battery_text":
|
|
_mem.battery_text = int(element.value)
|
|
|
|
# Tail tone elimination
|
|
elif elname == "ste":
|
|
_mem.ste = int(element.value)
|
|
|
|
# VFO Open
|
|
elif elname == "freq_mode_allowed":
|
|
_mem.freq_mode_allowed = int(element.value)
|
|
|
|
# Beep control
|
|
elif elname == "button_beep":
|
|
_mem.button_beep = int(element.value)
|
|
|
|
# Scan resume mode
|
|
elif elname == "scan_resume_mode":
|
|
_mem.scan_resume_mode = int(element.value)
|
|
|
|
# Keypad lock
|
|
elif elname == "key_lock":
|
|
_mem.key_lock = int(element.value)
|
|
|
|
# Auto keypad lock
|
|
elif elname == "auto_keypad_lock":
|
|
_mem.auto_keypad_lock = int(element.value)
|
|
|
|
# Power on display mode
|
|
elif elname == "welcome_mode":
|
|
_mem.power_on_dispmode = int(element.value)
|
|
|
|
# Keypad Tone
|
|
elif elname == "voice":
|
|
_mem.voice = int(element.value)
|
|
|
|
elif elname == "s0_level":
|
|
_mem.s0_level = -int(element.value)
|
|
|
|
elif elname == "s9_level":
|
|
_mem.s9_level = -int(element.value)
|
|
|
|
# elif elname == "password":
|
|
# if element.value.get_value() is None or element.value == "":
|
|
# _mem.password = 0xFFFFFFFF
|
|
# else:
|
|
# _mem.password = int(element.value)
|
|
|
|
# Alarm mode
|
|
elif elname == "alarm_mode":
|
|
_mem.alarm_mode = int(element.value)
|
|
|
|
# Reminding of end of talk
|
|
elif elname == "roger_beep":
|
|
_mem.roger_beep = int(element.value)
|
|
|
|
# Repeater tail tone elimination
|
|
elif elname == "rp_ste":
|
|
_mem.rp_ste = int(element.value)
|
|
|
|
# Logo string 1
|
|
elif elname == "logo1":
|
|
bts = str(element.value).rstrip("\x20\xff\x00")+"\x00"*12
|
|
_mem.logo_line1 = bts[0:12]+"\x00\xff\xff\xff"
|
|
|
|
# Logo string 2
|
|
elif elname == "logo2":
|
|
bts = str(element.value).rstrip("\x20\xff\x00")+"\x00"*12
|
|
_mem.logo_line2 = bts[0:12]+"\x00\xff\xff\xff"
|
|
|
|
# unlock settings
|
|
|
|
# FLOCK
|
|
elif elname == "int_flock":
|
|
_mem.int_flock = int(element.value)
|
|
|
|
# 350TX
|
|
elif elname == "int_350tx":
|
|
_mem.int_350tx = int(element.value)
|
|
|
|
# KILLED
|
|
elif elname == "int_KILLED":
|
|
_mem.int_KILLED = int(element.value)
|
|
|
|
# 200TX
|
|
elif elname == "int_200tx":
|
|
_mem.int_200tx = int(element.value)
|
|
|
|
# 500TX
|
|
elif elname == "int_500tx":
|
|
_mem.int_500tx = int(element.value)
|
|
|
|
# 350EN
|
|
elif elname == "int_350en":
|
|
_mem.int_350en = int(element.value)
|
|
|
|
# SCREN
|
|
elif elname == "int_scren":
|
|
_mem.int_scren = int(element.value)
|
|
|
|
# battery type
|
|
elif elname == "Battery_type":
|
|
_mem.Battery_type = int(element.value)
|
|
|
|
# set low_power f4hwn
|
|
elif elname == "set_low":
|
|
_mem.set_low = int(element.value)
|
|
|
|
# set ptt f4hwn
|
|
elif elname == "set_ptt":
|
|
_mem.set_ptt = int(element.value)
|
|
|
|
# set tot f4hwn
|
|
elif elname == "set_tot":
|
|
_mem.set_tot = int(element.value)
|
|
|
|
# set eot f4hwn
|
|
elif elname == "set_eot":
|
|
_mem.set_eot = int(element.value)
|
|
|
|
# set_contrast f4hwn
|
|
elif elname == "set_contrast":
|
|
_mem.set_contrast = int(element.value)
|
|
|
|
# set inv f4hwn
|
|
elif elname == "set_inv":
|
|
_mem.set_inv = int(element.value)
|
|
|
|
# set lck f4hwn
|
|
elif elname == "set_lck":
|
|
_mem.set_lck = int(element.value)
|
|
|
|
# set met f4hwn
|
|
elif elname == "set_met":
|
|
_mem.set_met = int(element.value)
|
|
|
|
# fm radio
|
|
for i in range(1, 21):
|
|
freqname = "FM_" + str(i)
|
|
if elname == freqname:
|
|
val = str(element.value).strip()
|
|
try:
|
|
val2 = int(float(val)*10)
|
|
except Exception:
|
|
val2 = 0xffff
|
|
|
|
if val2 < FMMIN*10 or val2 > FMMAX*10:
|
|
val2 = 0xffff
|
|
# raise errors.InvalidValueError(
|
|
# "FM radio frequency should be a value "
|
|
# "in the range %.1f - %.1f" % (FMMIN , FMMAX))
|
|
_mem.fmfreq[i-1] = val2
|
|
|
|
# dtmf settings
|
|
if elname == "dtmf_side_tone":
|
|
_mem.dtmf.side_tone = int(element.value)
|
|
|
|
elif elname == "dtmf_separate_code":
|
|
_mem.dtmf.separate_code = str(element.value)
|
|
|
|
elif elname == "dtmf_group_call_code":
|
|
_mem.dtmf.group_call_code = element.value
|
|
|
|
elif elname == "dtmf_decode_response":
|
|
_mem.dtmf.decode_response = int(element.value)
|
|
|
|
elif elname == "dtmf_auto_reset_time":
|
|
_mem.dtmf.auto_reset_time = int(element.value)
|
|
|
|
elif elname == "dtmf_preload_time":
|
|
_mem.dtmf.preload_time = int(int(element.value)/10)
|
|
|
|
elif elname == "dtmf_first_code_persist_time":
|
|
_mem.dtmf.first_code_persist_time = int(int(element.value)/10)
|
|
|
|
elif elname == "dtmf_hash_persist_time":
|
|
_mem.dtmf.hash_persist_time = int(int(element.value)/10)
|
|
|
|
elif elname == "dtmf_code_persist_time":
|
|
_mem.dtmf.code_persist_time = \
|
|
int(int(element.value)/10)
|
|
|
|
elif elname == "dtmf_code_interval_time":
|
|
_mem.dtmf.code_interval_time = \
|
|
int(int(element.value)/10)
|
|
|
|
elif elname == "dtmf_permit_remote_kill":
|
|
_mem.dtmf.permit_remote_kill = \
|
|
int(element.value)
|
|
|
|
elif elname == "dtmf_dtmf_local_code":
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*3
|
|
_mem.dtmf.local_code = k[0:3]
|
|
|
|
elif elname == "dtmf_dtmf_up_code":
|
|
k = str(element.value).strip("\x20\xff\x00") + "\x00"*16
|
|
_mem.dtmf.up_code = k[0:16]
|
|
|
|
elif elname == "dtmf_dtmf_down_code":
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*16
|
|
_mem.dtmf.down_code = k[0:16]
|
|
|
|
elif elname == "dtmf_kill_code":
|
|
k = str(element.value).strip("\x20\xff\x00") + "\x00"*5
|
|
_mem.dtmf.kill_code = k[0:5]
|
|
|
|
elif elname == "dtmf_revive_code":
|
|
k = str(element.value).strip("\x20\xff\x00") + "\x00"*5
|
|
_mem.dtmf.revive_code = k[0:5]
|
|
|
|
elif elname == "live_DTMF_decoder":
|
|
_mem.live_DTMF_decoder = int(element.value)
|
|
|
|
# dtmf contacts
|
|
for i in range(1, 17):
|
|
varname = "DTMF_" + str(i)
|
|
if elname == varname:
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8
|
|
_mem.dtmfcontact[i-1].name = k[0:8]
|
|
|
|
varnumname = "DTMFNUM_" + str(i)
|
|
if elname == varnumname:
|
|
k = str(element.value).rstrip("\x20\xff\x00") + "\xff"*3
|
|
_mem.dtmfcontact[i-1].number = k[0:3]
|
|
|
|
# scanlist stuff
|
|
if elname == "slDef":
|
|
_mem.slDef = int(element.value)
|
|
|
|
elif elname == "sl1PriorEnab":
|
|
_mem.sl1PriorEnab = int(element.value)
|
|
|
|
elif elname == "sl2PriorEnab":
|
|
_mem.sl2PriorEnab = int(element.value)
|
|
|
|
elif elname in ["sl1PriorCh1", "sl1PriorCh2", "sl2PriorCh1",
|
|
"sl2PriorCh2"]:
|
|
val = int(element.value)
|
|
|
|
if val > 200 or val < 1:
|
|
val = 0xff
|
|
else:
|
|
val -= 1
|
|
|
|
_mem[elname] = val
|
|
|
|
if elname == "key1_shortpress_action":
|
|
_mem.key1_shortpress_action = KEYACTIONS_LIST.index(element.value)
|
|
|
|
elif elname == "key1_longpress_action":
|
|
_mem.key1_longpress_action = KEYACTIONS_LIST.index(element.value)
|
|
|
|
elif elname == "key2_shortpress_action":
|
|
_mem.key2_shortpress_action = KEYACTIONS_LIST.index(element.value)
|
|
|
|
elif elname == "key2_longpress_action":
|
|
_mem.key2_longpress_action = KEYACTIONS_LIST.index(element.value)
|
|
|
|
elif elname == "keyM_longpress_action":
|
|
_mem.keyM_longpress_action = KEYACTIONS_LIST.index(element.value)
|
|
|
|
elif elname == "upload_calibration":
|
|
self._upload_calibration = bool(element.value)
|
|
|
|
elif element.changed() and elname.startswith("_mem.cal."):
|
|
exec(elname + " = element.value.get_value()")
|
|
|
|
def get_settings(self):
|
|
_mem = self._memobj
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
advanced = RadioSettingGroup("advanced", "Advanced Settings")
|
|
keya = RadioSettingGroup("keya", "Programmable Keys")
|
|
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
|
|
dtmfc = RadioSettingGroup("dtmfc", "DTMF Contacts")
|
|
scanl = RadioSettingGroup("scn", "Scan Lists")
|
|
unlock = RadioSettingGroup("unlock", "Unlock Settings")
|
|
fmradio = RadioSettingGroup("fmradio", "FM Radio")
|
|
calibration = RadioSettingGroup("calibration", "Calibration")
|
|
|
|
roinfo = RadioSettingGroup("roinfo", "Driver Information + Link to get latest driver F4HWN")
|
|
top = RadioSettings()
|
|
top.append(basic)
|
|
top.append(advanced)
|
|
top.append(keya)
|
|
top.append(dtmf)
|
|
if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING:
|
|
top.append(dtmfc)
|
|
top.append(scanl)
|
|
top.append(unlock)
|
|
if _mem.BUILD_OPTIONS.ENABLE_FMRADIO:
|
|
top.append(fmradio)
|
|
top.append(roinfo)
|
|
top.append(calibration)
|
|
|
|
# helper function
|
|
def append_label(radio_setting, label, descr=""):
|
|
if not hasattr(append_label, 'idx'):
|
|
append_label.idx = 0
|
|
|
|
val = RadioSettingValueString(len(descr), len(descr), descr)
|
|
val.set_mutable(False)
|
|
rs = RadioSetting("label" + str(append_label.idx), label, val)
|
|
append_label.idx += 1
|
|
radio_setting.append(rs)
|
|
|
|
# Programmable keys
|
|
def get_action(action_num):
|
|
""""get actual key action"""
|
|
has_alarm = self._memobj.BUILD_OPTIONS.ENABLE_ALARM
|
|
has1750 = self._memobj.BUILD_OPTIONS.ENABLE_TX1750
|
|
has_flashlight = self._memobj.BUILD_OPTIONS.ENABLE_FLASHLIGHT
|
|
lst = KEYACTIONS_LIST.copy()
|
|
if not has_alarm:
|
|
lst.remove("ALARM")
|
|
if not has1750:
|
|
lst.remove("1750Hz TONE")
|
|
if not has_flashlight:
|
|
lst.remove("FLASHLIGHT")
|
|
lst.remove("BKL_MIN_N/U") # F4HWN remove this
|
|
|
|
action_num = int(action_num)
|
|
if action_num >= len(KEYACTIONS_LIST) or \
|
|
KEYACTIONS_LIST[action_num] not in lst:
|
|
action_num = 0
|
|
return lst, KEYACTIONS_LIST[action_num]
|
|
|
|
val1s = RadioSettingValueList(*get_action(_mem.key1_shortpress_action))
|
|
rs = RadioSetting("key1_shortpress_action",
|
|
"Side key 1 short press (F1Shrt)", val1s)
|
|
rs.set_doc('F1Shrt: Select what action do you want to do when press this F1 key for a SHORT time, F1 key is locate on the side, the first key under the PTT')
|
|
keya.append(rs)
|
|
|
|
val1l = RadioSettingValueList(*get_action(_mem.key1_longpress_action))
|
|
rs = RadioSetting("key1_longpress_action",
|
|
"Side key 1 long press (F1Long)", val1l)
|
|
rs.set_doc('F1Long: Select what action do you want to do when press this F1 key for a LONG time, F1 key is locate on the side, the first key under the PTT')
|
|
keya.append(rs)
|
|
|
|
val2s = RadioSettingValueList(*get_action(_mem.key2_shortpress_action))
|
|
rs = RadioSetting("key2_shortpress_action",
|
|
"Side key 2 short press (F2Shrt)", val2s)
|
|
rs.set_doc('F2Shrt: Select what action do you want to do when press this F2 key for a SHORT time, F2 key is locate on the side, the second key under the PTT')
|
|
keya.append(rs)
|
|
|
|
val2l = RadioSettingValueList(*get_action(_mem.key2_longpress_action))
|
|
rs = RadioSetting("key2_longpress_action",
|
|
"Side key 2 long press (F2Long)", val2l)
|
|
rs.set_doc('F2Long: Select what action do you want to do when press this F2 key for a LONG time, F2 key is locate on the side, the second key under the PTT')
|
|
keya.append(rs)
|
|
|
|
valm = RadioSettingValueList(*get_action(_mem.keyM_longpress_action))
|
|
rs = RadioSetting("keyM_longpress_action",
|
|
"Menu key long press (M Long)", valm)
|
|
rs.set_doc('M Long: Select what action do you want to do when press this M key for a LONG time, M key is locate under the LCD, on the left side')
|
|
keya.append(rs)
|
|
|
|
# ----------------- DTMF settings
|
|
|
|
tmpval = str(_mem.dtmf.separate_code)
|
|
if tmpval not in DTMF_CODE_CHARS:
|
|
tmpval = '*'
|
|
val = RadioSettingValueString(1, 1, tmpval)
|
|
val.set_charset(DTMF_CODE_CHARS)
|
|
sep_code_setting = RadioSetting("dtmf_separate_code",
|
|
"Separate Code", val)
|
|
sep_code_setting.set_doc('Separate Code:')
|
|
|
|
tmpval = str(_mem.dtmf.group_call_code)
|
|
if tmpval not in DTMF_CODE_CHARS:
|
|
tmpval = '#'
|
|
val = RadioSettingValueString(1, 1, tmpval)
|
|
val.set_charset(DTMF_CODE_CHARS)
|
|
group_code_setting = RadioSetting("dtmf_group_call_code",
|
|
"Group Call Code", val)
|
|
group_code_setting.set_doc('Group Call Code: ')
|
|
|
|
tmpval = min_max_def(_mem.dtmf.first_code_persist_time * 10,
|
|
30, 1000, 300)
|
|
val = RadioSettingValueInteger(30, 1000, tmpval, 10)
|
|
first_code_per_setting = \
|
|
RadioSetting("dtmf_first_code_persist_time",
|
|
"First code persist time (ms)", val)
|
|
first_code_per_setting.set_doc('First code persist time: how long to you want the first dtmf will be sent in milisecond')
|
|
|
|
tmpval = min_max_def(_mem.dtmf.hash_persist_time * 10, 30, 1000, 300)
|
|
val = RadioSettingValueInteger(30, 1000, tmpval, 10)
|
|
spec_per_setting = RadioSetting("dtmf_hash_persist_time",
|
|
"#/* persist time (ms)", val)
|
|
spec_per_setting.set_doc('#/* persist time: how long this code # or / or * will be sent in milisecond')
|
|
|
|
tmpval = min_max_def(_mem.dtmf.code_persist_time * 10, 30, 1000, 300)
|
|
val = RadioSettingValueInteger(30, 1000, tmpval, 10)
|
|
code_per_setting = RadioSetting("dtmf_code_persist_time",
|
|
"Code persist time (ms)", val)
|
|
code_per_setting.set_doc('Code persist time: how long the code will be sent in milisecond')
|
|
|
|
tmpval = min_max_def(_mem.dtmf.code_interval_time * 10, 30, 1000, 300)
|
|
val = RadioSettingValueInteger(30, 1000, tmpval, 10)
|
|
code_int_setting = RadioSetting("dtmf_code_interval_time",
|
|
"Code interval time (ms)", val)
|
|
code_int_setting.set_doc('Code interval time: how long to wait between each code sent in milisecond')
|
|
|
|
tmpval = str(_mem.dtmf.local_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_ID:
|
|
continue
|
|
tmpval = "103"
|
|
break
|
|
val = RadioSettingValueString(3, 3, tmpval)
|
|
val.set_charset(DTMF_CHARS_ID)
|
|
ani_id_setting = \
|
|
RadioSetting("dtmf_dtmf_local_code",
|
|
"Local code (3 chars 0-9 ABCD) (ANI ID)", val)
|
|
ani_id_setting.set_doc('ANI ID: DTMF communication radio ID')
|
|
|
|
tmpval = str(_mem.dtmf.up_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_UPDOWN or i == "":
|
|
continue
|
|
else:
|
|
tmpval = "123"
|
|
break
|
|
val = RadioSettingValueString(1, 16, tmpval)
|
|
val.set_charset(DTMF_CHARS_UPDOWN)
|
|
up_code_setting = \
|
|
RadioSetting("dtmf_dtmf_up_code",
|
|
"Up code (1-16 chars 0-9 ABCD*#) (UPCode)", val)
|
|
up_code_setting.set_doc('UPCode: DTMF code that is sent at the beginning of transmission ')
|
|
|
|
tmpval = str(_mem.dtmf.down_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_UPDOWN:
|
|
continue
|
|
else:
|
|
tmpval = "456"
|
|
break
|
|
val = RadioSettingValueString(1, 16, tmpval)
|
|
val.set_charset(DTMF_CHARS_UPDOWN)
|
|
dw_code_setting = \
|
|
RadioSetting("dtmf_dtmf_down_code",
|
|
"Down code (1-16 chars 0-9 ABCD*#) (DWCode)", val)
|
|
dw_code_setting.set_doc('DWCode: DTMF code that is sent at the end of a transmission ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.dtmf.side_tone)
|
|
dtmf_side_tone_setting = \
|
|
RadioSetting("dtmf_side_tone",
|
|
"DTMF Sidetone on speaker when sent (D ST)", val)
|
|
dtmf_side_tone_setting.set_doc('D ST: DTMF side tone switch, lets you hear transmitted tones in the radio speaker ')
|
|
|
|
tmpval = list_def(_mem.dtmf.decode_response,
|
|
DTMF_DECODE_RESPONSE_LIST, 0)
|
|
val = RadioSettingValueList(DTMF_DECODE_RESPONSE_LIST, None, tmpval)
|
|
dtmf_resp_setting = RadioSetting("dtmf_decode_response",
|
|
"Decode Response (D Resp)", val)
|
|
dtmf_resp_setting.set_doc('D Resp: DTMF decoding response ')
|
|
|
|
tmpval = min_max_def(_mem.dtmf.auto_reset_time, 5, 60, 10)
|
|
val = RadioSettingValueInteger(5, 60, tmpval)
|
|
d_hold_setting = RadioSetting("dtmf_auto_reset_time",
|
|
"Auto reset time (s) (D Hold)", val)
|
|
d_hold_setting.set_doc('D Hold: DTMF auto reset time ')
|
|
|
|
# D Prel
|
|
tmpval = min_max_def(_mem.dtmf.preload_time * 10, 30, 990, 300)
|
|
val = RadioSettingValueInteger(30, 990, tmpval, 10)
|
|
d_prel_setting = RadioSetting("dtmf_preload_time",
|
|
"Pre-load time (ms) (D Prel)", val)
|
|
d_prel_setting.set_doc('D Prel: DTMF pre-load time ')
|
|
|
|
# D LIVE
|
|
val = RadioSettingValueBoolean(_mem.live_DTMF_decoder)
|
|
d_live_setting = \
|
|
RadioSetting("live_DTMF_decoder", "Displays DTMF codes"
|
|
" received in the middle of the screen (D Live)", val)
|
|
d_live_setting.set_doc('D Live: displays DTMF codes received by radio in the middle of the screen ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.dtmf.permit_remote_kill)
|
|
perm_kill_setting = RadioSetting("dtmf_permit_remote_kill",
|
|
"Permit remote kill", val)
|
|
|
|
tmpval = str(_mem.dtmf.kill_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_KILL:
|
|
continue
|
|
else:
|
|
tmpval = "77777"
|
|
break
|
|
if not len(tmpval) == 5:
|
|
tmpval = "77777"
|
|
val = RadioSettingValueString(5, 5, tmpval)
|
|
val.set_charset(DTMF_CHARS_KILL)
|
|
kill_code_setting = RadioSetting("dtmf_kill_code",
|
|
"Kill code (5 chars 0-9 ABCD)", val)
|
|
|
|
tmpval = str(_mem.dtmf.revive_code).upper().strip(
|
|
"\x00\xff\x20")
|
|
for i in tmpval:
|
|
if i in DTMF_CHARS_KILL:
|
|
continue
|
|
else:
|
|
tmpval = "88888"
|
|
break
|
|
if not len(tmpval) == 5:
|
|
tmpval = "88888"
|
|
val = RadioSettingValueString(5, 5, tmpval)
|
|
val.set_charset(DTMF_CHARS_KILL)
|
|
rev_code_setting = RadioSetting("dtmf_revive_code",
|
|
"Revive code (5 chars 0-9 ABCD)", val)
|
|
|
|
val = RadioSettingValueBoolean(_mem.int_KILLED)
|
|
killed_setting = RadioSetting("int_KILLED", "DTMF kill lock", val)
|
|
|
|
# ----------------- DTMF Contacts
|
|
|
|
append_label(dtmfc, "DTMF Contacts (D List)",
|
|
"All DTMF Contacts are 3 codes "
|
|
"(valid: 0-9 * # ABCD), "
|
|
"or an empty string")
|
|
|
|
for i in range(1, 17):
|
|
varname = "DTMF_"+str(i)
|
|
varnumname = "DTMFNUM_"+str(i)
|
|
vardescr = "DTMF Contact "+str(i)+" name"
|
|
varinumdescr = "DTMF Contact "+str(i)+" number"
|
|
|
|
cntn = str(_mem.dtmfcontact[i-1].name).strip("\x20\x00\xff")
|
|
cntnum = str(_mem.dtmfcontact[i-1].number).strip("\x20\x00\xff")
|
|
|
|
val = RadioSettingValueString(0, 8, cntn)
|
|
rs = RadioSetting(varname, vardescr, val)
|
|
dtmfc.append(rs)
|
|
|
|
val = RadioSettingValueString(0, 3, cntnum)
|
|
val.set_charset(DTMF_CHARS)
|
|
rs = RadioSetting(varnumname, varinumdescr, val)
|
|
dtmfc.append(rs)
|
|
|
|
# ----------------- Scan Lists
|
|
|
|
tmpscanl = list_def(_mem.slDef, SCANLIST_SELECT_LIST, 0)
|
|
val = RadioSettingValueList(SCANLIST_SELECT_LIST, None, tmpscanl)
|
|
rs = RadioSetting("slDef", "Default scanlist (SList)", val)
|
|
rs.set_doc('SList: Selects which channel is used by memory channel scanner ')
|
|
scanl.append(rs)
|
|
|
|
val = RadioSettingValueBoolean(_mem.sl1PriorEnab)
|
|
rs = RadioSetting("sl1PriorEnab", "List 1 priority channel scan", val)
|
|
rs.set_doc('List 1 priority: is this list as priority ')
|
|
scanl.append(rs)
|
|
|
|
ch_list = ["None"]
|
|
for ch in range(1, 201):
|
|
ch_list.append("Channel M" + str(ch))
|
|
|
|
tmpch = list_def(_mem.sl1PriorCh1 + 1, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpch)
|
|
rs = RadioSetting("sl1PriorCh1", "List 1 priority channel 1", val)
|
|
rs.set_doc('List 1 priority channel 1: select the channel you want for priority ')
|
|
scanl.append(rs)
|
|
|
|
tmpch = list_def(_mem.sl1PriorCh2 + 1, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpch)
|
|
rs = RadioSetting("sl1PriorCh2", "List 1 priority channel 2", val)
|
|
rs.set_doc('List 1 priority channel 2: select the channel you want for priority ')
|
|
scanl.append(rs)
|
|
|
|
val = RadioSettingValueBoolean(_mem.sl2PriorEnab)
|
|
rs = RadioSetting("sl2PriorEnab", "List 2 priority channel scan", val)
|
|
rs.set_doc('List 2 priority: is this list as priority ')
|
|
scanl.append(rs)
|
|
|
|
tmpch = list_def(_mem.sl2PriorCh1 + 1, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpch)
|
|
rs = RadioSetting("sl2PriorCh1", "List 2 priority channel 1", val)
|
|
rs.set_doc('List 2 priority channel 1: select the channel you want for priority ')
|
|
scanl.append(rs)
|
|
|
|
tmpch = list_def(_mem.sl2PriorCh2 + 1, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpch)
|
|
rs = RadioSetting("sl2PriorCh2", "List 2 priority channel 2", val)
|
|
rs.set_doc('List 2 priority channel 2: select the channel you want for priority ')
|
|
scanl.append(rs)
|
|
|
|
# ----------------- Basic settings
|
|
|
|
ch_list = []
|
|
for ch in range(1, 201):
|
|
ch_list.append("Channel M" + str(ch))
|
|
for bnd in range(1, 8):
|
|
ch_list.append("Band F" + str(bnd))
|
|
if _mem.BUILD_OPTIONS.ENABLE_NOAA:
|
|
for bnd in range(1, 11):
|
|
ch_list.append("NOAA N" + str(bnd))
|
|
|
|
tmpfreq0 = list_def(_mem.ScreenChannel_A, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpfreq0)
|
|
freq0_setting = RadioSetting("VFO_A_chn",
|
|
"VFO A current channel/band", val)
|
|
freq0_setting.set_doc('VFO A current channel/band: To select what is in the VFO A, ' + \
|
|
'*CHANNEL number 1-200, *BAND F1-F7, look in memory tab to view what ' + \
|
|
'is program their ')
|
|
|
|
tmpfreq1 = list_def(_mem.ScreenChannel_B, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpfreq1)
|
|
freq1_setting = RadioSetting("VFO_B_chn",
|
|
"VFO B current channel/band", val)
|
|
freq1_setting.set_doc('VFO B current channel/band: To select what is in the VFO B, ' + \
|
|
'*CHANNEL number 1-200, *BAND F1-F7, look in memory tab to view what ' + \
|
|
'is program their ')
|
|
|
|
tmptxvfo = list_def(_mem.TX_VFO, TX_VFO_LIST, 0)
|
|
val = RadioSettingValueList(TX_VFO_LIST, None, tmptxvfo)
|
|
tx_vfo_setting = RadioSetting("TX_VFO", "Main VFO", val)
|
|
tx_vfo_setting.set_doc('Main VFO: To select the frequency that is active in the radio, ' + \
|
|
'( A is on TOP, B is on the BOTTOM ) ')
|
|
val = RadioSettingValueBoolean(False)
|
|
|
|
def validate_upload_f4hwn(value):
|
|
return value
|
|
|
|
val.set_validate_callback(validate_upload_f4hwn)
|
|
Upload_f4hwn = RadioSetting("upload_f4hwn",
|
|
"Upload F4HWN setting to radio", val)
|
|
Upload_f4hwn.set_doc('Upload F4HWN: this section of feature is in a different range of memory. ' + \
|
|
'So it need to be upload to the radio separately, check this case to ' + \
|
|
'upload ONLY and ONLY all the section of F4HWN feature to the radio. ' + \
|
|
'It will be realy fast to upload, then the radio will reboot. ' + \
|
|
'After uploading, uncheck the case to be able to upload all other feature')
|
|
self.upload_f4hwn = val
|
|
|
|
# Set_Low_Power f4hwn
|
|
tmpsetlow = list_def(_mem.set_low, SET_LOW_LIST, 0)
|
|
val = RadioSettingValueList(SET_LOW_LIST, SET_LOW_LIST[tmpsetlow])
|
|
SetLowSetting = RadioSetting("set_low", "Set the power LOW level to specific power (SetLow)", val)
|
|
SetLowSetting.set_doc('SetLow: When the POWER TX is set to power Low ' + \
|
|
'(see tab memories in colon POWER to know the TX LEVEL for each channel), ' + \
|
|
'this Low will be at this power TX level ')
|
|
|
|
# Set_Ptt f4hwn
|
|
tmpsetptt = list_def(_mem.set_ptt, SET_PTT_LIST, 0)
|
|
val = RadioSettingValueList(SET_PTT_LIST, SET_PTT_LIST[tmpsetptt])
|
|
SetPttSetting = RadioSetting("set_ptt", "Ptt Mode, Set how react the ptt (SetPtt)", val)
|
|
SetPttSetting.set_doc('SetPtt: *CLASSIC: press = start transmission, release = stop transmission. ' + \
|
|
'*ONEPUSH: you no longer need to press the PTT continuously to transmit. ' + \
|
|
' Simply press once to start transmission, and press a second time to stop. ' + \
|
|
' No more finger cramps :) ')
|
|
|
|
# Set_tot f4hwn
|
|
tmpsettot = list_def(_mem.set_tot, SET_TOT_EOT_LIST, 0)
|
|
val = RadioSettingValueList(SET_TOT_EOT_LIST, SET_TOT_EOT_LIST[tmpsettot])
|
|
SetTotSetting = RadioSetting("set_tot", "Set TX timeout indicator (SetTot)", val)
|
|
SetTotSetting.set_doc('SetTot: to display the Set TX timeout indicator ')
|
|
|
|
# Set_eot f4hwn
|
|
tmpseteot = list_def(_mem.set_eot, SET_TOT_EOT_LIST, 0)
|
|
val = RadioSettingValueList(SET_TOT_EOT_LIST, SET_TOT_EOT_LIST[tmpseteot])
|
|
SetEotSetting = RadioSetting("set_eot", " Set End Of Transmission indicator (SetEot)", val)
|
|
SetEotSetting.set_doc('SetEot: to display the end of the Transmission ')
|
|
|
|
# Set_contrast f4hwn
|
|
tmpcontrast = min_max_def(_mem.set_contrast, 0, 15, 11)
|
|
val = RadioSettingValueInteger(0, 15, tmpcontrast)
|
|
contrastSetting = RadioSetting("set_contrast", "Set Contrast Level (SetCtr)", val)
|
|
contrastSetting.set_doc('SetCtr: to set contrast (0 to 15), default: 10 ')
|
|
|
|
# Set_inv f4hwn
|
|
tmpsetinv = list_def(_mem.set_inv, SET_OFF_ON_LIST, 0)
|
|
val = RadioSettingValueList(SET_OFF_ON_LIST, SET_OFF_ON_LIST[tmpsetinv])
|
|
SetInvSetting = RadioSetting("set_inv", "Set inverse lcd (SetInv)", val)
|
|
SetInvSetting.set_doc('SetInv: the texte display is black on white or texte white on black, default: black on white')
|
|
|
|
# Set_lck, uses
|
|
tmpsetlck = list_def(_mem.set_lck, SET_LCK_LIST, 0)
|
|
val = RadioSettingValueList(SET_LCK_LIST, SET_LCK_LIST[tmpsetlck])
|
|
SetLckSetting = RadioSetting("set_lck", "Lock the PTT when keypad is lock (SetLck)", val)
|
|
SetLckSetting.set_doc('SetLck: when keypad is lock, do you want to lock the ptt with it or not ')
|
|
|
|
# Set_met f4hwn
|
|
tmpsetmet = list_def(_mem.set_met, SET_MET_LIST, 0)
|
|
val = RadioSettingValueList(SET_MET_LIST, SET_MET_LIST[tmpsetmet])
|
|
SetMetSetting = RadioSetting("set_met", "Display the Smeter style (SetMet)", val)
|
|
SetMetSetting.set_doc('SetMet: change the style of the Smeter display, from CLASSIC to TINY ')
|
|
|
|
tmpsq = min_max_def(_mem.squelch, 0, 9, 1)
|
|
val = RadioSettingValueInteger(0, 9, tmpsq)
|
|
squelch_setting = RadioSetting("squelch", "Squelch (Sql)", val)
|
|
squelch_setting.set_doc('Sql: squelch sensitivity level 0 to 9, 0 = no restriction')
|
|
|
|
ch_list = []
|
|
for ch in range(1, 201):
|
|
ch_list.append("Channel M" + str(ch))
|
|
|
|
tmpc = list_def(_mem.call_channel, ch_list, 0)
|
|
val = RadioSettingValueList(ch_list, None, tmpc)
|
|
call_channel_setting = RadioSetting("call_channel",
|
|
"One key call channel (1 Call)",
|
|
val)
|
|
call_channel_setting.set_doc('1 Call: one key call channel, lets you quickly switch to the channel with 9 Call button ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.key_lock)
|
|
keypad_lock_setting = RadioSetting("key_lock", "Keypad locked", val)
|
|
keypad_lock_setting.set_doc('Keypad locked: Activated the lock on the keypad now')
|
|
|
|
tmpval = list_def(_mem.auto_keypad_lock, AUTO_KEYPAD_LOCK_LIST, 1)
|
|
val = RadioSettingValueList(AUTO_KEYPAD_LOCK_LIST, None, tmpval)
|
|
auto_keypad_lock_setting = RadioSetting("auto_keypad_lock",
|
|
"Auto keypad lock after inactivity ~15sec (KeyLck)", val)
|
|
auto_keypad_lock_setting.set_doc('KeyLck: Keypad lock after inactivity ~15sec *OFF (no lock keypad), AUTO ')
|
|
|
|
tmptot = list_def(_mem.max_talk_time, TALK_TIME_LIST, 1)
|
|
val = RadioSettingValueList(TALK_TIME_LIST, None, tmptot)
|
|
tx_t_out_setting = RadioSetting("tot",
|
|
"Max talk, TX Time Out (TxTOut)", val)
|
|
tx_t_out_setting.set_doc('TxTOut: select the time limit max transmission ')
|
|
|
|
tmpbatsave = list_def(_mem.battery_save, BATSAVE_LIST, 4)
|
|
val = RadioSettingValueList(BATSAVE_LIST, None, tmpbatsave)
|
|
bat_save_setting = RadioSetting("battery_save",
|
|
"Battery save (BatSav)", val)
|
|
bat_save_setting.set_doc('BatSav: battery save option, a rate between active time and sleep time ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.noaa_autoscan)
|
|
noaa_auto_scan_setting = RadioSetting("noaa_autoscan",
|
|
"NOAA Autoscan (NOAA-S)", val)
|
|
noaa_auto_scan_setting.set_doc('NOAA-S: ')
|
|
|
|
tmpmicgain = list_def(_mem.mic_gain, MIC_GAIN_LIST, 2)
|
|
val = RadioSettingValueList(MIC_GAIN_LIST, None, tmpmicgain)
|
|
mic_gain_setting = RadioSetting("mic_gain", "Mic Gain (Mic)", val)
|
|
mic_gain_setting.set_doc('Mic: Select the microphone sensitivity level ( Gain) ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.mic_bar)
|
|
mic_bar_setting = RadioSetting("mic_bar",
|
|
"Microphone Bar display (MicBar)", val)
|
|
mic_bar_setting.set_doc('MicBar: Display microphone bar that appears while transmitting ')
|
|
|
|
tmpchdispmode = list_def(_mem.channel_display_mode,
|
|
CHANNELDISP_LIST, 0)
|
|
val = RadioSettingValueList(CHANNELDISP_LIST, None, tmpchdispmode)
|
|
ch_disp_setting = RadioSetting("channel_display_mode",
|
|
"Channel display mode (ChDisp)", val)
|
|
ch_disp_setting.set_doc('ChDisp: what to display on screen. *The frequency, *The channel number, *The name, *Then name plus the frequency ')
|
|
|
|
tmpdispmode = list_def(_mem.power_on_dispmode, WELCOME_LIST, 0)
|
|
val = RadioSettingValueList(WELCOME_LIST, None, tmpdispmode)
|
|
p_on_msg_setting = RadioSetting("welcome_mode",
|
|
"Power ON display message (POnMsg)",
|
|
val)
|
|
p_on_msg_setting.set_doc('POnMsg: ON power upof the radio, what do you want to display. *Full screen (black). *Your Message. *Voltage of the battery. *Nothing')
|
|
|
|
logo1 = str(_mem.logo_line1).strip("\x20\x00\xff") + "\x00"
|
|
logo1 = _getstring(logo1.encode('ascii', errors='ignore'), 0, 12)
|
|
val = RadioSettingValueString(0, 12, logo1)
|
|
logo1_setting = RadioSetting("logo1",
|
|
"Message line 1 ( MAX 12 characters ) ",
|
|
val)
|
|
logo1_setting.set_doc('Message line 1: The first line you can put your message, their is a maximum of 12 characters')
|
|
|
|
logo2 = str(_mem.logo_line2).strip("\x20\x00\xff") + "\x00"
|
|
logo2 = _getstring(logo2.encode('ascii', errors='ignore'), 0, 12)
|
|
val = RadioSettingValueString(0, 12, logo2)
|
|
logo2_setting = RadioSetting("logo2",
|
|
"Message line 2 ( MAX 12 characters )",
|
|
val)
|
|
logo2_setting.set_doc('Message line 2: The second line you can put your message, their is a maximum of 12 characters')
|
|
|
|
tmpbattxt = list_def(_mem.battery_text, BAT_TXT_LIST, 2)
|
|
val = RadioSettingValueList(BAT_TXT_LIST, None, tmpbattxt)
|
|
bat_txt_setting = RadioSetting("battery_text",
|
|
"Battery Level Display (BatTXT)", val)
|
|
bat_txt_setting.set_doc('BatTXT: Display additional battery value on the status bar in % or volts')
|
|
|
|
tmpback = list_def(_mem.backlight_time, BACKLIGHT_LIST, 0)
|
|
val = RadioSettingValueList(BACKLIGHT_LIST, None, tmpback)
|
|
back_lt_setting = RadioSetting("backlight_time",
|
|
"Backlight time (BackLt)", val)
|
|
back_lt_setting.set_doc('BackLt: backlight duration, how long the backlight will stay ON after a action end')
|
|
|
|
tmpback = list_def(_mem.backlight_min, BACKLIGHT_LVL_LIST, 0)
|
|
val = RadioSettingValueList(BACKLIGHT_LVL_LIST, None, tmpback)
|
|
bl_min_setting = RadioSetting("backlight_min",
|
|
"Backlight level min (BLMin)", val)
|
|
bl_min_setting.set_doc('BLMin: minimal backlight brightness, when the screen backlight turns OFF it will go dim to this value')
|
|
|
|
tmpback = list_def(_mem.backlight_max, BACKLIGHT_LVL_LIST, 10)
|
|
val = RadioSettingValueList(BACKLIGHT_LVL_LIST, None, tmpback)
|
|
bl_max_setting = RadioSetting("backlight_max",
|
|
"Backlight level max (BLMax)", val)
|
|
bl_max_setting.set_doc('BLMax: maximal backlight brightness, when the screen backlight turns ON it will turn bright to this value')
|
|
|
|
tmpback = list_def(_mem.backlight_on_TX_RX, BACKLIGHT_TX_RX_LIST, 0)
|
|
val = RadioSettingValueList(BACKLIGHT_TX_RX_LIST, None, tmpback)
|
|
blt_trx_setting = RadioSetting("backlight_on_TX_RX",
|
|
"Backlight on TX/RX (BltTRX)", val)
|
|
blt_trx_setting.set_doc('BltTRX: backlight activation on TX or RX or both TX and RX or no backlight')
|
|
|
|
val = RadioSettingValueBoolean(_mem.button_beep)
|
|
beep_setting = RadioSetting("button_beep",
|
|
"Key press beep sound (Beep)", val)
|
|
beep_setting.set_doc('Beep: keypad press beep sound')
|
|
|
|
tmpalarmmode = list_def(_mem.roger_beep, ROGER_LIST, 0)
|
|
val = RadioSettingValueList(ROGER_LIST, None, tmpalarmmode)
|
|
roger_setting = RadioSetting("roger_beep",
|
|
"End of transmission beep (Roger)", val)
|
|
roger_setting.set_doc('Roger: squelch tail eliminator, eliminates noise at the end of a transmission')
|
|
|
|
val = RadioSettingValueBoolean(_mem.ste)
|
|
ste_setting = RadioSetting("ste", "Squelch tail elimination (STE)", val)
|
|
ste_setting.set_doc('STE: squelch tail eliminator, eliminates noise at the end of a transmission')
|
|
|
|
tmprte = list_def(_mem.rp_ste, RTE_LIST, 0)
|
|
val = RadioSettingValueList(RTE_LIST, None, tmprte)
|
|
rp_ste_setting = \
|
|
RadioSetting("rp_ste",
|
|
"Repeater squelch tail elimination (RP STE)", val)
|
|
rp_ste_setting.set_doc('RP STE: repeater squelch tail eliminator')
|
|
|
|
val = RadioSettingValueBoolean(_mem.AM_fix)
|
|
am_fix_setting = RadioSetting("AM_fix",
|
|
"AM reception fix (AM Fix)", val)
|
|
am_fix_setting.set_doc('AM Fix: activates autogain AM fix function')
|
|
|
|
tmpvox = min_max_def((_mem.vox_level + 1) * _mem.vox_switch, 0, 10, 0)
|
|
val = RadioSettingValueList(VOX_LIST, None, tmpvox)
|
|
vox_setting = RadioSetting("vox", "Voice-operated switch (VOX)", val)
|
|
vox_setting.set_doc('VOX: voice TX activation sensitivity level VOX Setting ')
|
|
|
|
tmprxmode = list_def((bool(_mem.crossband) << 1)
|
|
+ bool(_mem.dual_watch),
|
|
RXMODE_LIST, 0)
|
|
val = RadioSettingValueList(RXMODE_LIST, None, tmprxmode)
|
|
rx_mode_setting = RadioSetting("rx_mode", "RX Mode (RxMode)", val)
|
|
rx_mode_setting.set_doc('RxMode: *MAIN ONLY: transmits and listens on the main frequency. *DUAL RX RESPOND: ' + \
|
|
'listens both frequencies, if signal received on the secondary frequency, it locks to ' + \
|
|
'it for a couple of seconds so you can respond to the call (DWR). *CROSS BAND: always ' + \
|
|
'transmits on the primary and listens on the secondary frequency (XB). *MAIN TX DUAL RX:' + \
|
|
'always transmits on the primary, listens to both (DW).')
|
|
|
|
val = RadioSettingValueBoolean(_mem.freq_mode_allowed)
|
|
freq_mode_allowed_setting = RadioSetting("freq_mode_allowed",
|
|
"Frequency mode allowed", val)
|
|
freq_mode_allowed_setting.set_doc('Frequency mode allowed ')
|
|
|
|
tmpscanres = list_def(_mem.scan_resume_mode, SCANRESUME_LIST, 0)
|
|
val = RadioSettingValueList(SCANRESUME_LIST, None, tmpscanres)
|
|
scn_rev_setting = RadioSetting("scan_resume_mode",
|
|
"Scan resume mode (ScnRev)", val)
|
|
scn_rev_setting.set_doc('ScnRev: scan resume mode *CARRIER - resume scan after signal disappears. ' + \
|
|
'*TIMEOUT - resume scan after 5 seconds pause. *STOP - after receiving a signal, stop the scan')
|
|
|
|
tmpvoice = list_def(_mem.voice, VOICE_LIST, 0)
|
|
val = RadioSettingValueList(VOICE_LIST, None, tmpvoice)
|
|
voice_setting = RadioSetting("voice", "Voice", val)
|
|
|
|
tmpalarmmode = list_def(_mem.alarm_mode, ALARMMODE_LIST, 0)
|
|
val = RadioSettingValueList(ALARMMODE_LIST, None, tmpalarmmode)
|
|
alarm_setting = RadioSetting("alarm_mode", "Alarm mode", val)
|
|
|
|
# ----------------- Extra settings
|
|
|
|
# S-meter
|
|
tmp_s0 = -int(_mem.s0_level)
|
|
tmp_s9 = -int(_mem.s9_level)
|
|
|
|
if tmp_s0 not in range(-200, -91) or tmp_s9 not in range(-160, -51) \
|
|
or tmp_s9 < tmp_s0+9:
|
|
|
|
tmp_s0 = -130
|
|
tmp_s9 = -76
|
|
val = RadioSettingValueInteger(-200, -90, tmp_s0)
|
|
s0_level_setting = RadioSetting("s0_level",
|
|
"S-meter S0 level [dBm]", val)
|
|
s0_level_setting.set_doc('S-meter S0 level [dBm]: To set the level calibration for S0 ')
|
|
|
|
val = RadioSettingValueInteger(-160, -50, tmp_s9)
|
|
s9_level_setting = RadioSetting("s9_level",
|
|
"S-meter S9 level [dBm]", val)
|
|
s9_level_setting.set_doc('S-meter S9 level [dBm]: To set the level calibration for S9 ')
|
|
|
|
# Battery Type
|
|
tmpbtype = list_def(_mem.Battery_type, BATTYPE_LIST, 0)
|
|
val = RadioSettingValueList(BATTYPE_LIST, BATTYPE_LIST[tmpbtype])
|
|
bat_type_setting = RadioSetting("Battery_type",
|
|
"Battery Type (BatTyp)", val)
|
|
bat_type_setting.set_doc('BatTyp: What type of battery the radio is using, this affect the level value of the battery in the display')
|
|
|
|
# Power on password
|
|
# def validate_password(value):
|
|
# value = value.strip(" ")
|
|
# if value.isdigit():
|
|
# return value.zfill(6)
|
|
# if value != "":
|
|
# raise InvalidValueError("Power on password "
|
|
# "can only have digits")
|
|
# return ""
|
|
|
|
# pswd_str = str(int(_mem.password)).zfill(6) \
|
|
# if _mem.password < 1000000 else ""
|
|
# val = RadioSettingValueString(0, 6, pswd_str)
|
|
# val.set_validate_callback(validate_password)
|
|
# pswd_setting = RadioSetting("password", "Power on password", val)
|
|
|
|
# ----------------- FM radio
|
|
|
|
append_label(fmradio, "Channel Memory Radio (MR)", "Frequency [MHz]")
|
|
|
|
for i in range(1, 21):
|
|
fmfreq = _mem.fmfreq[i-1]/10.0
|
|
freq_name = str(fmfreq)
|
|
if fmfreq < FMMIN or fmfreq > FMMAX:
|
|
freq_name = ""
|
|
rs = RadioSetting("FM_" + str(i), "Ch " + str(i),
|
|
RadioSettingValueString(0, 5, freq_name))
|
|
rs.set_doc('Radio Frequency: Enter the radio frequency in your area in MHZ, example: 96.9 ' + \
|
|
'To listen the FM radio, Long press on the 5 key, then if you want to scan FM radio ' + \
|
|
'Station near you, press the *. but scan will erase the existing FM radio list ')
|
|
fmradio.append(rs)
|
|
|
|
# ----------------- Unlock settings
|
|
|
|
# F-LOCK
|
|
def validate_int_flock(value):
|
|
mem_val = self._memobj.int_flock
|
|
if mem_val != 7 and value == FLOCK_LIST[7]:
|
|
msg = "\"" + value + "\" can only be enabled from radio menu"
|
|
raise InvalidValueError(msg)
|
|
return value
|
|
|
|
tmpflock = list_def(_mem.int_flock, FLOCK_LIST, 0)
|
|
val = RadioSettingValueList(FLOCK_LIST, None, tmpflock)
|
|
val.set_validate_callback(validate_int_flock)
|
|
f_lock_setting = RadioSetting("int_flock",
|
|
"TX Frequency Lock (F Lock)", val)
|
|
f_lock_setting.set_doc('F Lock: Sets the TX frequency band plan ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.int_200tx)
|
|
tx200_setting = RadioSetting("int_200tx",
|
|
"Unlock 174-350MHz TX (Tx 200)", val)
|
|
tx200_setting.set_doc('Enables transmission on 200MHz ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.int_350tx)
|
|
tx350_setting = RadioSetting("int_350tx",
|
|
"Unlock 350-400MHz TX (Tx 350)", val)
|
|
tx350_setting.set_doc('Enables transmission on 350MHz ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.int_500tx)
|
|
tx500_setting = RadioSetting("int_500tx",
|
|
"Unlock 500-600MHz TX (Tx 500)", val)
|
|
tx500_setting.set_doc('Enables transmission on 500MHz ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.int_350en)
|
|
en350_setting = RadioSetting("int_350en",
|
|
"Unlock 350-400MHz RX (350 En)", val)
|
|
en350_setting.set_doc('Enables reception on 350MHz ')
|
|
|
|
val = RadioSettingValueBoolean(_mem.int_scren)
|
|
en_scrambler_setting = RadioSetting("int_scren",
|
|
"Scrambler enabled (ScraEn)", val)
|
|
en_scrambler_setting.set_doc('Enables Scrambler ')
|
|
|
|
# ----------------- Driver Info
|
|
|
|
if self.FIRMWARE_VERSION == "":
|
|
firmware = "To get the firmware version please download" \
|
|
"the image from the radio first"
|
|
else:
|
|
firmware = self.FIRMWARE_VERSION
|
|
|
|
append_label(roinfo,
|
|
"=" * 6 + " Firmware F4HWN " + "=" * 300, "=" * 300)
|
|
|
|
append_label(roinfo, "Firmware Version", firmware)
|
|
val = RadioSettingValueString(0,75,FIRMWARE_DRIVER_VERSION_UPDATE)
|
|
rs = RadioSetting("Update","Latest Firmware F4HWN" + ", copy link:(CTRL-C), paste:(CTRL-V) to your browser -> ", val)
|
|
rs.set_doc('Be sure you have the latest firmware available')
|
|
roinfo.append(rs)
|
|
|
|
append_label(roinfo,
|
|
"=" * 6 + " Chirp Driver F4HWN " + "=" * 300, "=" * 300)
|
|
|
|
append_label(roinfo, "Driver Chirp Version", DRIVER_VERSION)
|
|
val = RadioSettingValueString(0,75,CHIRP_DRIVER_VERSION_UPDATE)
|
|
rs = RadioSetting("Update1","Latest Driver " + self.MODEL + ", copy link:(CTRL-C), paste:(CTRL-V) to your browser -> ", val)
|
|
rs.set_doc('Be sure you have the latest chirp driver available')
|
|
roinfo.append(rs)
|
|
|
|
# ----------------- Calibration
|
|
|
|
val = RadioSettingValueBoolean(False)
|
|
|
|
def validate_upload_calibration(value):
|
|
if value and not self.upload_calibration:
|
|
msg = "This option may brake your radio!!!\n" \
|
|
"You are doing this at your own risk.\n" \
|
|
"Make sure you have a working calibration backup.\n" \
|
|
"Don't use it unless you know what you're doing."
|
|
ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL |
|
|
wx.CANCEL_DEFAULT | wx.ICON_WARNING)
|
|
value = ret == wx.OK
|
|
self.upload_calibration = value
|
|
return value
|
|
|
|
val.set_validate_callback(validate_upload_calibration)
|
|
radio_setting = RadioSetting("upload_calibration",
|
|
"Upload calibration", val)
|
|
radio_setting.set_doc('To Upload to the radio only the setting in the calibration section, you need to check the case, then upload to the radio')
|
|
calibration.append(radio_setting)
|
|
|
|
radio_setting_group = RadioSettingGroup("squelch_calibration",
|
|
"Squelch")
|
|
calibration.append(radio_setting_group)
|
|
|
|
bands = {"sqlBand1_3": "Frequency Band 1-3",
|
|
"sqlBand4_7": "Frequency Band 4-7"}
|
|
for bnd, bndn in bands.items():
|
|
append_label(radio_setting_group,
|
|
"=" * 6 + " " + bndn + " " + "=" * 300, "=" * 300)
|
|
for sql in range(0, 10):
|
|
prefix = "_mem.cal." + bnd + "."
|
|
postfix = "[" + str(sql) + "]"
|
|
append_label(radio_setting_group, "Squelch " + str(sql))
|
|
|
|
name = prefix + "openRssiThr" + postfix
|
|
tempval = min_max_def(eval(name), 0, 255, 0)
|
|
val = RadioSettingValueInteger(0, 255, tempval)
|
|
radio_setting = RadioSetting(name, "RSSI threshold open", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = prefix + "closeRssiThr" + postfix
|
|
tempval = min_max_def(eval(name), 0, 255, 0)
|
|
val = RadioSettingValueInteger(0, 255, tempval)
|
|
radio_setting = RadioSetting(name, "RSSI threshold close", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = prefix + "openNoiseThr" + postfix
|
|
tempval = min_max_def(eval(name), 0, 127, 0)
|
|
val = RadioSettingValueInteger(0, 127, tempval)
|
|
radio_setting = RadioSetting(name, "Noise threshold open", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = prefix + "closeNoiseThr" + postfix
|
|
tempval = min_max_def(eval(name), 0, 127, 0)
|
|
val = RadioSettingValueInteger(0, 127, tempval)
|
|
radio_setting = RadioSetting(name, "Noise threshold close",
|
|
val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = prefix + "openGlitchThr" + postfix
|
|
tempval = min_max_def(eval(name), 0, 255, 0)
|
|
val = RadioSettingValueInteger(0, 255, tempval)
|
|
radio_setting = RadioSetting(name, "Glitch threshold open",
|
|
val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = prefix + "closeGlitchThr" + postfix
|
|
tempval = min_max_def(eval(name), 0, 255, 0)
|
|
val = RadioSettingValueInteger(0, 255, tempval)
|
|
radio_setting = RadioSetting(name, "Glitch threshold close",
|
|
val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
radio_setting_group = RadioSettingGroup("rssi_level_calibration",
|
|
"RSSI levels")
|
|
calibration.append(radio_setting_group)
|
|
|
|
bands = {"rssiLevelsBands1_2": "1-2 ", "rssiLevelsBands3_7": "3-7 "}
|
|
for bnd, bndn in bands.items():
|
|
append_label(radio_setting_group,
|
|
"=" * 6 +
|
|
" RSSI levels for QS original small bar graph, bands "
|
|
+ bndn + "=" * 300, "=" * 300)
|
|
for lvl in [1, 2, 4, 6]:
|
|
name = "_mem.cal." + bnd + ".level" + str(lvl)
|
|
tempval = min_max_def(eval(name), 0, 65535, 0)
|
|
val = RadioSettingValueInteger(0, 65535, tempval)
|
|
radio_setting = RadioSetting(name, "Level " + str(lvl), val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
#
|
|
|
|
radio_setting_group = RadioSettingGroup("tx_power_calibration",
|
|
"TX power")
|
|
calibration.append(radio_setting_group)
|
|
|
|
for bnd in range(0, 7):
|
|
append_label(radio_setting_group, "=" * 6 + " TX power band "
|
|
+ str(bnd+1) + " " + "=" * 300, "=" * 300)
|
|
powers = {"low": "Low", "mid": "Medium", "hi": "High"}
|
|
for pwr, pwrn in powers.items():
|
|
append_label(radio_setting_group, pwrn)
|
|
bounds = ["lower", "center", "upper"]
|
|
for bound in bounds:
|
|
name = f"_mem.cal.txp[{bnd}].{pwr}.{bound}"
|
|
tempval = min_max_def(eval(name), 0, 255, 0)
|
|
val = RadioSettingValueInteger(0, 255, tempval)
|
|
radio_setting = RadioSetting(name, bound.capitalize(), val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
#
|
|
|
|
radio_setting_group = RadioSettingGroup("battery_calibration",
|
|
"Battery")
|
|
calibration.append(radio_setting_group)
|
|
|
|
for lvl in range(0, 6):
|
|
name = "_mem.cal.batLvl[" + str(lvl) + "]"
|
|
temp_val = min_max_def(eval(name), 0, 4999, 4999)
|
|
val = RadioSettingValueInteger(0, 4999, temp_val)
|
|
radio_setting = \
|
|
RadioSetting(name, "Level " + str(lvl) +
|
|
(" (voltage calibration)" if lvl == 3 else ""),
|
|
val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
radio_setting_group = RadioSettingGroup("vox_calibration", "VOX")
|
|
calibration.append(radio_setting_group)
|
|
|
|
for lvl in range(0, 10):
|
|
append_label(radio_setting_group, "Level " + str(lvl + 1))
|
|
|
|
name = "_mem.cal.vox1Thr[" + str(lvl) + "]"
|
|
val = RadioSettingValueInteger(0, 65535, eval(name))
|
|
radio_setting = RadioSetting(name, "On", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = "_mem.cal.vox0Thr[" + str(lvl) + "]"
|
|
val = RadioSettingValueInteger(0, 65535, eval(name))
|
|
radio_setting = RadioSetting(name, "Off", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
radio_setting_group = RadioSettingGroup("mic_calibration",
|
|
"Microphone sensitivity")
|
|
calibration.append(radio_setting_group)
|
|
|
|
for lvl in range(0, 5):
|
|
name = "_mem.cal.micLevel[" + str(lvl) + "]"
|
|
tempval = min_max_def(eval(name), 0, 31, 31)
|
|
val = RadioSettingValueInteger(0, 31, tempval)
|
|
radio_setting = RadioSetting(name, "Level " + str(lvl), val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
radio_setting_group = RadioSettingGroup("other_calibration", "Other")
|
|
calibration.append(radio_setting_group)
|
|
|
|
name = "_mem.cal.xtalFreqLow"
|
|
temp_val = min_max_def(eval(name), -1000, 1000, 0)
|
|
val = RadioSettingValueInteger(-1000, 1000, temp_val)
|
|
radio_setting = RadioSetting(name, "Xtal frequency low", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = "_mem.cal.volumeGain"
|
|
temp_val = min_max_def(eval(name), 0, 63, 58)
|
|
val = RadioSettingValueInteger(0, 63, temp_val)
|
|
radio_setting = RadioSetting(name, "Volume gain", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
name = "_mem.cal.dacGain"
|
|
temp_val = min_max_def(eval(name), 0, 15, 8)
|
|
val = RadioSettingValueInteger(0, 15, temp_val)
|
|
radio_setting = RadioSetting(name, "DAC gain", val)
|
|
radio_setting_group.append(radio_setting)
|
|
|
|
# -------- LAYOUT
|
|
append_label(basic,
|
|
"=" * 6 + " F4HWN, Begin Setting, if this area need to be upload select the upload F4HWN" + "=" * 300, "=" * 300)
|
|
basic.append(Upload_f4hwn)
|
|
basic.append(SetLowSetting)
|
|
basic.append(SetPttSetting)
|
|
basic.append(SetTotSetting)
|
|
basic.append(SetEotSetting)
|
|
basic.append(contrastSetting)
|
|
basic.append(SetInvSetting)
|
|
basic.append(SetLckSetting)
|
|
basic.append(SetMetSetting)
|
|
append_label(basic,
|
|
"=" * 6 + " F4HWN, End Setting " + "=" * 300, "=" * 300)
|
|
|
|
append_label(basic,
|
|
"=" * 6 + " General settings " + "=" * 300, "=" * 300)
|
|
|
|
basic.append(squelch_setting)
|
|
basic.append(rx_mode_setting)
|
|
basic.append(call_channel_setting)
|
|
basic.append(auto_keypad_lock_setting)
|
|
basic.append(tx_t_out_setting)
|
|
basic.append(bat_save_setting)
|
|
basic.append(scn_rev_setting)
|
|
if _mem.BUILD_OPTIONS.ENABLE_NOAA:
|
|
basic.append(noaa_auto_scan_setting)
|
|
if _mem.BUILD_OPTIONS.ENABLE_AM_FIX:
|
|
basic.append(am_fix_setting)
|
|
|
|
append_label(basic,
|
|
"=" * 6 + " Display settings " + "=" * 300, "=" * 300)
|
|
|
|
basic.append(bat_txt_setting)
|
|
basic.append(mic_bar_setting)
|
|
basic.append(ch_disp_setting)
|
|
basic.append(p_on_msg_setting)
|
|
basic.append(logo1_setting)
|
|
basic.append(logo2_setting)
|
|
|
|
append_label(basic, "=" * 6 + " Backlight settings "
|
|
+ "=" * 300, "=" * 300)
|
|
|
|
basic.append(back_lt_setting)
|
|
basic.append(bl_min_setting)
|
|
basic.append(bl_max_setting)
|
|
basic.append(blt_trx_setting)
|
|
|
|
append_label(basic, "=" * 6 + " Audio related settings "
|
|
+ "=" * 300, "=" * 300)
|
|
|
|
if _mem.BUILD_OPTIONS.ENABLE_VOX:
|
|
basic.append(vox_setting)
|
|
basic.append(mic_gain_setting)
|
|
basic.append(beep_setting)
|
|
basic.append(roger_setting)
|
|
basic.append(ste_setting)
|
|
basic.append(rp_ste_setting)
|
|
if _mem.BUILD_OPTIONS.ENABLE_VOICE:
|
|
basic.append(voice_setting)
|
|
if _mem.BUILD_OPTIONS.ENABLE_ALARM:
|
|
basic.append(alarm_setting)
|
|
|
|
append_label(basic, "=" * 6 + " Radio state " + "=" * 300, "=" * 300)
|
|
|
|
basic.append(freq0_setting)
|
|
basic.append(freq1_setting)
|
|
basic.append(tx_vfo_setting)
|
|
basic.append(keypad_lock_setting)
|
|
|
|
advanced.append(freq_mode_allowed_setting)
|
|
advanced.append(bat_type_setting)
|
|
advanced.append(s0_level_setting)
|
|
advanced.append(s9_level_setting)
|
|
# if _mem.BUILD_OPTIONS.ENABLE_PWRON_PASSWORD:
|
|
# advanced.append(pswd_setting)
|
|
|
|
if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING:
|
|
dtmf.append(sep_code_setting)
|
|
dtmf.append(group_code_setting)
|
|
dtmf.append(first_code_per_setting)
|
|
dtmf.append(spec_per_setting)
|
|
dtmf.append(code_per_setting)
|
|
dtmf.append(code_int_setting)
|
|
if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING:
|
|
dtmf.append(ani_id_setting)
|
|
dtmf.append(up_code_setting)
|
|
dtmf.append(dw_code_setting)
|
|
dtmf.append(d_prel_setting)
|
|
dtmf.append(dtmf_side_tone_setting)
|
|
if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING:
|
|
dtmf.append(dtmf_resp_setting)
|
|
dtmf.append(d_hold_setting)
|
|
dtmf.append(d_live_setting)
|
|
dtmf.append(perm_kill_setting)
|
|
dtmf.append(kill_code_setting)
|
|
dtmf.append(rev_code_setting)
|
|
dtmf.append(killed_setting)
|
|
|
|
unlock.append(f_lock_setting)
|
|
unlock.append(tx200_setting)
|
|
unlock.append(tx350_setting)
|
|
unlock.append(tx500_setting)
|
|
unlock.append(en350_setting)
|
|
# desable by f4hwn
|
|
# unlock.append(en_scrambler_setting)
|
|
|
|
return top
|
|
|
|
def set_memory(self, memory):
|
|
"""
|
|
Store details about a high-level memory to the memory map
|
|
This is called when a user edits a memory in the UI
|
|
"""
|
|
number = memory.number-1
|
|
att_num = number if number < 200 else 200 + int((number - 200) / 2)
|
|
|
|
# Get a low-level memory object mapped to the image
|
|
_mem_chan = self._memobj.channel[number]
|
|
_mem_attr = self._memobj.ch_attr[att_num]
|
|
|
|
_mem_attr.is_scanlist1 = 0
|
|
_mem_attr.is_scanlist2 = 0
|
|
_mem_attr.compander = 0
|
|
_mem_attr.is_free = 1
|
|
_mem_attr.band = 0x7
|
|
|
|
# empty memory
|
|
if memory.empty:
|
|
_mem_chan.set_raw("\xFF" * 16)
|
|
if number < 200:
|
|
_mem_chname = self._memobj.channelname[number]
|
|
_mem_chname.set_raw("\xFF" * 16)
|
|
return memory
|
|
|
|
# find band
|
|
band = self._find_band(memory.freq)
|
|
|
|
# mode
|
|
tmp_mode = self.get_features().valid_modes.index(memory.mode)
|
|
_mem_chan.modulation = tmp_mode / 2
|
|
_mem_chan.bandwidth = tmp_mode % 2
|
|
if memory.mode == "USB":
|
|
_mem_chan.bandwidth = 1 # narrow
|
|
|
|
# frequency/offset
|
|
_mem_chan.freq = memory.freq/10
|
|
_mem_chan.offset = memory.offset/10
|
|
|
|
if memory.duplex == "":
|
|
_mem_chan.offset = 0
|
|
_mem_chan.offsetDir = 0
|
|
elif memory.duplex == '-':
|
|
_mem_chan.offsetDir = FLAGS1_OFFSET_MINUS
|
|
elif memory.duplex == '+':
|
|
_mem_chan.offsetDir = FLAGS1_OFFSET_PLUS
|
|
elif memory.duplex == 'off':
|
|
# we fake tx disable by setting the tx freq to 0 MHz
|
|
_mem_chan.offsetDir = FLAGS1_OFFSET_MINUS
|
|
_mem_chan.offset = _mem_chan.freq
|
|
# set band
|
|
|
|
_mem_attr.is_free = 0
|
|
_mem_attr.band = band
|
|
|
|
# channels >200 are the 14 VFO chanells and don't have names
|
|
if number < 200:
|
|
_mem_chname = self._memobj.channelname[number]
|
|
tag = memory.name.ljust(10) + "\x00"*6
|
|
_mem_chname.name = tag # Store the alpha tag
|
|
|
|
# tone data
|
|
self._set_tone(memory, _mem_chan)
|
|
|
|
# step
|
|
_mem_chan.step = STEPS.index(memory.tuning_step)
|
|
|
|
# tx power
|
|
if str(memory.power) == str(UVK5_POWER_LEVELS[2]):
|
|
_mem_chan.txpower = POWER_HIGH
|
|
elif str(memory.power) == str(UVK5_POWER_LEVELS[1]):
|
|
_mem_chan.txpower = POWER_MEDIUM
|
|
else:
|
|
_mem_chan.txpower = POWER_LOW
|
|
|
|
# -------- EXTRA SETTINGS
|
|
|
|
def get_setting(name, def_val):
|
|
if name in memory.extra:
|
|
return int(memory.extra[name].value)
|
|
return def_val
|
|
|
|
_mem_chan.busyChLockout = get_setting("busyChLockout", False)
|
|
_mem_chan.dtmf_pttid = get_setting("pttid", 0)
|
|
_mem_chan.freq_reverse = get_setting("frev", False)
|
|
_mem_chan.dtmf_decode = get_setting("dtmfdecode", False)
|
|
_mem_chan.scrambler = get_setting("scrambler", 0)
|
|
_mem_attr.compander = get_setting("compander", 0)
|
|
if number < 200:
|
|
tmp_val = get_setting("scanlists", 0)
|
|
_mem_attr.is_scanlist1 = bool(tmp_val & 1)
|
|
_mem_attr.is_scanlist2 = bool(tmp_val & 2)
|
|
|
|
return memory
|