|
# Copyright 2016-2020 Jim Unroe <rock.unroe@gmail.com>
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
import time
|
|
import struct
|
|
import logging
|
|
|
|
from chirp import chirp_common, directory, memmap
|
|
from chirp import bitwise, errors, util
|
|
from chirp.settings import RadioSetting, RadioSettingGroup, \
|
|
RadioSettingValueInteger, RadioSettingValueList, \
|
|
RadioSettingValueBoolean, RadioSettings, \
|
|
RadioSettingValueString
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
MEM_FORMAT = """
|
|
#seekto 0x0010;
|
|
struct {
|
|
lbcd rxfreq[4];
|
|
lbcd txfreq[4];
|
|
ul16 rx_tone;
|
|
ul16 tx_tone;
|
|
u8 unknown1;
|
|
u8 unknown3:2,
|
|
highpower:1, // Power Level
|
|
wide:1, // Bandwidth
|
|
unknown4:2,
|
|
signal:1, // Signal
|
|
bcl:1; // BCL
|
|
u8 unknown5[2];
|
|
} memory[16];
|
|
|
|
#seekto 0x012F;
|
|
struct {
|
|
u8 voice; // Voice Annunciation
|
|
u8 tot; // Time-out Timer
|
|
u8 unknown1[3];
|
|
u8 squelch; // Squelch Level
|
|
u8 save; // Battery Saver
|
|
u8 beep; // Beep
|
|
u8 unknown2[2];
|
|
u8 vox; // VOX
|
|
u8 voxgain; // VOX Gain
|
|
u8 voxdelay; // VOX Delay
|
|
u8 unknown3[2];
|
|
u8 pf2key; // PF2 Key
|
|
} settings;
|
|
|
|
#seekto 0x017E;
|
|
u8 skipflags[2]; // SCAN_ADD
|
|
|
|
#seekto 0x0200;
|
|
struct {
|
|
char id_0x200[8]; // Radio ID @ 0x0200
|
|
} radio;
|
|
|
|
#seekto 0x0300;
|
|
struct {
|
|
char line1[32];
|
|
char line2[32];
|
|
} embedded_msg;
|
|
"""
|
|
|
|
CMD_ACK = b"\x06"
|
|
|
|
RT22_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=2.00),
|
|
chirp_common.PowerLevel("High", watts=5.00)]
|
|
|
|
RT22_DTCS = tuple(sorted(chirp_common.DTCS_CODES + (645,)))
|
|
|
|
PF2KEY_LIST = ["Scan", "Local Alarm", "Remote Alarm"]
|
|
TIMEOUTTIMER_LIST = ["Off"] + ["%s seconds" % x for x in range(15, 615, 15)]
|
|
VOICE_LIST = ["Off", "Chinese", "English"]
|
|
VOX_LIST = ["OFF"] + ["%s" % x for x in range(1, 17)]
|
|
VOXDELAY_LIST = ["0.5 | Off",
|
|
"1.0 | 0",
|
|
"1.5 | 1",
|
|
"2.0 | 2",
|
|
"2.5 | 3",
|
|
"3.0 | 4",
|
|
"--- | 5"]
|
|
|
|
VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \
|
|
"`{|}!\"#$%&'()*+,-./:;<=>?@[]^_"
|
|
|
|
|
|
def _ident_from_data(data):
|
|
return data[0x1B8:0x1C0]
|
|
|
|
|
|
def _ident_from_image(radio):
|
|
return _ident_from_data(radio.get_mmap())
|
|
|
|
|
|
def _get_radio_model(radio):
|
|
block = _rt22_read_block(radio, 0x360, 0x10)
|
|
block = _rt22_read_block(radio, 0x1B8, 0x10)
|
|
version = block[0:8]
|
|
return version
|
|
|
|
|
|
def _rt22_enter_programming_mode(radio):
|
|
serial = radio.pipe
|
|
|
|
magic = b"PROGRGS"
|
|
exito = False
|
|
for i in range(0, 5):
|
|
for j in range(0, len(magic)):
|
|
time.sleep(0.005)
|
|
serial.write(magic[j:j + 1])
|
|
ack = serial.read(1)
|
|
|
|
try:
|
|
if ack == CMD_ACK:
|
|
exito = True
|
|
break
|
|
except:
|
|
LOG.debug("Attempt #%s, failed, trying again" % i)
|
|
pass
|
|
|
|
# check if we had EXITO
|
|
if exito is False:
|
|
msg = "The radio did not accept program mode after five tries.\n"
|
|
msg += "Check you interface cable and power cycle your radio."
|
|
raise errors.RadioError(msg)
|
|
|
|
try:
|
|
serial.write(b"\x02")
|
|
ident = serial.read(8)
|
|
except:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Error communicating with radio")
|
|
|
|
# check if ident is OK
|
|
itis = False
|
|
for fp in radio._fileid:
|
|
if fp in ident:
|
|
# got it!
|
|
itis = True
|
|
|
|
break
|
|
|
|
if itis is False:
|
|
LOG.debug("Incorrect model ID, got this:\n\n" + util.hexprint(ident))
|
|
raise errors.RadioError("Radio identification failed.")
|
|
|
|
try:
|
|
serial.write(CMD_ACK)
|
|
ack = serial.read(1)
|
|
except:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Error communicating with radio")
|
|
|
|
if ack != CMD_ACK:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Radio refused to enter programming mode")
|
|
|
|
try:
|
|
serial.write(b"\x07")
|
|
ack = serial.read(1)
|
|
except:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Error communicating with radio")
|
|
|
|
if ack != b"\x4E":
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Radio refused to enter programming mode")
|
|
|
|
return ident
|
|
|
|
|
|
def _rt22_exit_programming_mode(radio):
|
|
serial = radio.pipe
|
|
try:
|
|
serial.write(b"E")
|
|
except:
|
|
raise errors.RadioError("Radio refused to exit programming mode")
|
|
|
|
|
|
def _rt22_read_block(radio, block_addr, block_size):
|
|
serial = radio.pipe
|
|
|
|
cmd = struct.pack(">cHb", b'R', block_addr, block_size)
|
|
expectedresponse = b"W" + cmd[1:]
|
|
LOG.debug("Reading block %04x..." % (block_addr))
|
|
|
|
try:
|
|
for j in range(0, len(cmd)):
|
|
time.sleep(0.005)
|
|
serial.write(cmd[j:j + 1])
|
|
|
|
response = serial.read(4 + block_size)
|
|
if response[:4] != expectedresponse:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise Exception("Error reading block %04x." % (block_addr))
|
|
|
|
block_data = response[4:]
|
|
|
|
time.sleep(0.005)
|
|
serial.write(CMD_ACK)
|
|
ack = serial.read(1)
|
|
except:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Failed to read block at %04x" % block_addr)
|
|
|
|
if ack != CMD_ACK:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise Exception("No ACK reading block %04x." % (block_addr))
|
|
|
|
return block_data
|
|
|
|
|
|
def _rt22_write_block(radio, block_addr, block_size, _requires_patch=False,
|
|
_radio_id=""):
|
|
serial = radio.pipe
|
|
|
|
cmd = struct.pack(">cHb", b'W', block_addr, block_size)
|
|
if _requires_patch:
|
|
mmap = radio.get_mmap()
|
|
data = mmap[block_addr:block_addr + block_size]
|
|
# For some radios (RT-622 & RT22FRS) memory at 0x1b8 reads as 0, but
|
|
# radio ID should be written instead
|
|
if block_addr == 0x1b8:
|
|
for fp in _radio_id:
|
|
if fp in mmap[0:len(_radio_id)]:
|
|
data = mmap[0:len(_radio_id)] + data[len(_radio_id):]
|
|
else:
|
|
data = radio.get_mmap()[block_addr:block_addr + block_size]
|
|
|
|
LOG.debug("Writing Data:")
|
|
LOG.debug(util.hexprint(cmd + data))
|
|
|
|
try:
|
|
for j in range(0, len(cmd)):
|
|
time.sleep(0.005)
|
|
serial.write(cmd[j:j + 1])
|
|
for j in range(0, len(data)):
|
|
time.sleep(0.005)
|
|
serial.write(data[j:j + 1])
|
|
if serial.read(1) != CMD_ACK:
|
|
raise Exception("No ACK")
|
|
except:
|
|
_rt22_exit_programming_mode(radio)
|
|
raise errors.RadioError("Failed to send block "
|
|
"to radio at %04x" % block_addr)
|
|
|
|
|
|
def do_download(radio):
|
|
LOG.debug("download")
|
|
radio_ident = _rt22_enter_programming_mode(radio)
|
|
LOG.info("Radio Ident is %s" % repr(radio_ident))
|
|
|
|
data = b""
|
|
|
|
status = chirp_common.Status()
|
|
status.msg = "Cloning from radio"
|
|
|
|
status.cur = 0
|
|
status.max = radio._memsize
|
|
|
|
for addr in range(0, radio._memsize, radio._block_size):
|
|
status.cur = addr + radio._block_size
|
|
radio.status_fn(status)
|
|
|
|
block = _rt22_read_block(radio, addr, radio._block_size)
|
|
data += block
|
|
|
|
LOG.debug("Address: %04x" % addr)
|
|
LOG.debug(util.hexprint(block))
|
|
|
|
_rt22_exit_programming_mode(radio)
|
|
|
|
return memmap.MemoryMapBytes(data)
|
|
|
|
|
|
def do_upload(radio):
|
|
status = chirp_common.Status()
|
|
status.msg = "Uploading to radio"
|
|
|
|
radio_ident = _rt22_enter_programming_mode(radio)
|
|
LOG.info("Radio Ident is %s" % repr(radio_ident))
|
|
|
|
image_ident = _ident_from_image(radio)
|
|
LOG.info("Image Ident is %s" % repr(image_ident))
|
|
|
|
# Determine if upload requires patching
|
|
if image_ident == b"\x00\x00\x00\x00\x00\x00\xFF\xFF":
|
|
patch_block = True
|
|
else:
|
|
patch_block = False
|
|
|
|
status.cur = 0
|
|
status.max = radio._memsize
|
|
|
|
for start_addr, end_addr, block_size in radio._ranges:
|
|
for addr in range(start_addr, end_addr, block_size):
|
|
status.cur = addr + block_size
|
|
radio.status_fn(status)
|
|
_rt22_write_block(radio, addr, block_size, patch_block,
|
|
radio_ident)
|
|
|
|
_rt22_exit_programming_mode(radio)
|
|
|
|
|
|
def model_match(cls, data):
|
|
"""Match the opened/downloaded image to the correct version"""
|
|
|
|
if len(data) == 0x0408:
|
|
rid = data[0x0400:0x0408]
|
|
return rid.startswith(cls.MODEL.encode())
|
|
else:
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class RT22Radio(chirp_common.CloneModeRadio):
|
|
"""Retevis RT22"""
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT22"
|
|
BAUD_RATE = 9600
|
|
NEEDS_COMPAT_SERIAL = False
|
|
|
|
_ranges = [
|
|
(0x0000, 0x0180, 0x10),
|
|
(0x01B8, 0x01F8, 0x10),
|
|
(0x01F8, 0x0200, 0x08),
|
|
(0x0200, 0x0340, 0x10),
|
|
]
|
|
_memsize = 0x0400
|
|
_block_size = 0x40
|
|
_fileid = [b"P32073", b"P3" + b"\x00\x00\x00" + b"3", b"P3207!",
|
|
b"\x00\x00\x00\x00\x00\x00\xF8\xFF"]
|
|
|
|
def get_features(self):
|
|
rf = chirp_common.RadioFeatures()
|
|
rf.has_settings = True
|
|
rf.has_bank = False
|
|
rf.has_ctone = True
|
|
rf.has_cross = True
|
|
rf.has_rx_dtcs = True
|
|
rf.has_tuning_step = False
|
|
rf.can_odd_split = True
|
|
rf.has_name = False
|
|
rf.valid_skips = ["", "S"]
|
|
rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"]
|
|
rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone",
|
|
"->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"]
|
|
rf.valid_power_levels = RT22_POWER_LEVELS
|
|
rf.valid_duplexes = ["", "-", "+", "split", "off"]
|
|
rf.valid_modes = ["NFM", "FM"] # 12.5 kHz, 25 kHz.
|
|
rf.valid_dtcs_codes = RT22_DTCS
|
|
rf.memory_bounds = (1, 16)
|
|
rf.valid_tuning_steps = [2.5, 5., 6.25, 10., 12.5, 25.]
|
|
rf.valid_bands = [(400000000, 520000000)]
|
|
|
|
return rf
|
|
|
|
def process_mmap(self):
|
|
self._memobj = bitwise.parse(MEM_FORMAT, self._mmap)
|
|
|
|
def sync_in(self):
|
|
"""Download from radio"""
|
|
try:
|
|
data = do_download(self)
|
|
except errors.RadioError:
|
|
# Pass through any real errors we raise
|
|
raise
|
|
except:
|
|
# If anything unexpected happens, make sure we raise
|
|
# a RadioError and log the problem
|
|
LOG.exception('Unexpected error during download')
|
|
raise errors.RadioError('Unexpected error communicating '
|
|
'with the radio')
|
|
self._mmap = data
|
|
self.process_mmap()
|
|
|
|
def sync_out(self):
|
|
"""Upload to radio"""
|
|
try:
|
|
do_upload(self)
|
|
except:
|
|
# If anything unexpected happens, make sure we raise
|
|
# a RadioError and log the problem
|
|
LOG.exception('Unexpected error during upload')
|
|
raise errors.RadioError('Unexpected error communicating '
|
|
'with the radio')
|
|
|
|
def get_raw_memory(self, number):
|
|
return repr(self._memobj.memory[number - 1])
|
|
|
|
def _get_tone(self, _mem, mem):
|
|
def _get_dcs(val):
|
|
code = int("%03o" % (val & 0x07FF))
|
|
pol = (val & 0x8000) and "R" or "N"
|
|
return code, pol
|
|
|
|
if _mem.tx_tone != 0xFFFF and _mem.tx_tone > 0x2800:
|
|
tcode, tpol = _get_dcs(_mem.tx_tone)
|
|
mem.dtcs = tcode
|
|
txmode = "DTCS"
|
|
elif _mem.tx_tone != 0xFFFF:
|
|
mem.rtone = _mem.tx_tone / 10.0
|
|
txmode = "Tone"
|
|
else:
|
|
txmode = ""
|
|
|
|
if _mem.rx_tone != 0xFFFF and _mem.rx_tone > 0x2800:
|
|
rcode, rpol = _get_dcs(_mem.rx_tone)
|
|
mem.rx_dtcs = rcode
|
|
rxmode = "DTCS"
|
|
elif _mem.rx_tone != 0xFFFF:
|
|
mem.ctone = _mem.rx_tone / 10.0
|
|
rxmode = "Tone"
|
|
else:
|
|
rxmode = ""
|
|
|
|
if txmode == "Tone" and not rxmode:
|
|
mem.tmode = "Tone"
|
|
elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone:
|
|
mem.tmode = "TSQL"
|
|
elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs:
|
|
mem.tmode = "DTCS"
|
|
elif rxmode or txmode:
|
|
mem.tmode = "Cross"
|
|
mem.cross_mode = "%s->%s" % (txmode, rxmode)
|
|
|
|
if mem.tmode == "DTCS":
|
|
mem.dtcs_polarity = "%s%s" % (tpol, rpol)
|
|
|
|
LOG.debug("Got TX %s (%i) RX %s (%i)" %
|
|
(txmode, _mem.tx_tone, rxmode, _mem.rx_tone))
|
|
|
|
def get_memory(self, number):
|
|
bitpos = (1 << ((number - 1) % 8))
|
|
bytepos = ((number - 1) / 8)
|
|
LOG.debug("bitpos %s" % bitpos)
|
|
LOG.debug("bytepos %s" % bytepos)
|
|
|
|
_mem = self._memobj.memory[number - 1]
|
|
_skp = self._memobj.skipflags[bytepos]
|
|
|
|
mem = chirp_common.Memory()
|
|
|
|
mem.number = number
|
|
mem.freq = int(_mem.rxfreq) * 10
|
|
|
|
# We'll consider any blank (i.e. 0 MHz frequency) to be empty
|
|
if mem.freq == 0:
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if _mem.rxfreq.get_raw() == b"\xFF\xFF\xFF\xFF":
|
|
mem.freq = 0
|
|
mem.empty = True
|
|
return mem
|
|
|
|
if int(_mem.rxfreq) == int(_mem.txfreq):
|
|
mem.duplex = ""
|
|
mem.offset = 0
|
|
else:
|
|
mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+"
|
|
mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10
|
|
|
|
mem.mode = _mem.wide and "FM" or "NFM"
|
|
|
|
self._get_tone(_mem, mem)
|
|
|
|
mem.power = RT22_POWER_LEVELS[_mem.highpower]
|
|
|
|
mem.skip = "" if (_skp & bitpos) else "S"
|
|
LOG.debug("mem.skip %s" % mem.skip)
|
|
|
|
mem.extra = RadioSettingGroup("Extra", "extra")
|
|
|
|
rs = RadioSettingValueBoolean(_mem.bcl)
|
|
rset = RadioSetting("bcl", "Busy Channel Lockout", rs)
|
|
mem.extra.append(rset)
|
|
|
|
rs = RadioSettingValueBoolean(_mem.signal)
|
|
rset = RadioSetting("signal", "Signal", rs)
|
|
mem.extra.append(rset)
|
|
|
|
return mem
|
|
|
|
def _set_tone(self, mem, _mem):
|
|
def _set_dcs(code, pol):
|
|
val = int("%i" % code, 8) + 0x2800
|
|
if pol == "R":
|
|
val += 0x8000
|
|
return val
|
|
|
|
rx_mode = tx_mode = None
|
|
rx_tone = tx_tone = 0xFFFF
|
|
|
|
if mem.tmode == "Tone":
|
|
tx_mode = "Tone"
|
|
rx_mode = None
|
|
tx_tone = int(mem.rtone * 10)
|
|
elif mem.tmode == "TSQL":
|
|
rx_mode = tx_mode = "Tone"
|
|
rx_tone = tx_tone = int(mem.ctone * 10)
|
|
elif mem.tmode == "DTCS":
|
|
tx_mode = rx_mode = "DTCS"
|
|
tx_tone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
|
|
rx_tone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1])
|
|
elif mem.tmode == "Cross":
|
|
tx_mode, rx_mode = mem.cross_mode.split("->")
|
|
if tx_mode == "DTCS":
|
|
tx_tone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0])
|
|
elif tx_mode == "Tone":
|
|
tx_tone = int(mem.rtone * 10)
|
|
if rx_mode == "DTCS":
|
|
rx_tone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1])
|
|
elif rx_mode == "Tone":
|
|
rx_tone = int(mem.ctone * 10)
|
|
|
|
_mem.rx_tone = rx_tone
|
|
_mem.tx_tone = tx_tone
|
|
|
|
LOG.debug("Set TX %s (%i) RX %s (%i)" %
|
|
(tx_mode, _mem.tx_tone, rx_mode, _mem.rx_tone))
|
|
|
|
def set_memory(self, mem):
|
|
bitpos = (1 << ((mem.number - 1) % 8))
|
|
bytepos = ((mem.number - 1) / 8)
|
|
LOG.debug("bitpos %s" % bitpos)
|
|
LOG.debug("bytepos %s" % bytepos)
|
|
|
|
_mem = self._memobj.memory[mem.number - 1]
|
|
_skp = self._memobj.skipflags[bytepos]
|
|
|
|
if mem.empty:
|
|
_mem.set_raw("\xFF" * (_mem.size() // 8))
|
|
return
|
|
|
|
_mem.rxfreq = mem.freq / 10
|
|
|
|
if mem.duplex == "off":
|
|
for i in range(0, 4):
|
|
_mem.txfreq[i].set_raw("\xFF")
|
|
elif mem.duplex == "split":
|
|
_mem.txfreq = mem.offset / 10
|
|
elif mem.duplex == "+":
|
|
_mem.txfreq = (mem.freq + mem.offset) / 10
|
|
elif mem.duplex == "-":
|
|
_mem.txfreq = (mem.freq - mem.offset) / 10
|
|
else:
|
|
_mem.txfreq = mem.freq / 10
|
|
|
|
_mem.wide = mem.mode == "FM"
|
|
|
|
self._set_tone(mem, _mem)
|
|
|
|
_mem.highpower = mem.power == RT22_POWER_LEVELS[1]
|
|
|
|
if mem.skip != "S":
|
|
_skp |= bitpos
|
|
else:
|
|
_skp &= ~bitpos
|
|
LOG.debug("_skp %s" % _skp)
|
|
|
|
for setting in mem.extra:
|
|
setattr(_mem, setting.get_name(), setting.value)
|
|
|
|
def get_settings(self):
|
|
_settings = self._memobj.settings
|
|
_message = self._memobj.embedded_msg
|
|
basic = RadioSettingGroup("basic", "Basic Settings")
|
|
top = RadioSettings(basic)
|
|
|
|
rs = RadioSetting("squelch", "Squelch Level",
|
|
RadioSettingValueInteger(0, 9, _settings.squelch))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("tot", "Time-out timer",
|
|
RadioSettingValueList(
|
|
TIMEOUTTIMER_LIST,
|
|
TIMEOUTTIMER_LIST[_settings.tot]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voice", "Voice Prompts",
|
|
RadioSettingValueList(
|
|
VOICE_LIST, VOICE_LIST[_settings.voice]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("pf2key", "PF2 Key",
|
|
RadioSettingValueList(
|
|
PF2KEY_LIST, PF2KEY_LIST[_settings.pf2key]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("vox", "Vox",
|
|
RadioSettingValueBoolean(_settings.vox))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voxgain", "VOX Level",
|
|
RadioSettingValueList(
|
|
VOX_LIST, VOX_LIST[_settings.voxgain]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("voxdelay", "VOX Delay Time (Old | New)",
|
|
RadioSettingValueList(
|
|
VOXDELAY_LIST,
|
|
VOXDELAY_LIST[_settings.voxdelay]))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("save", "Battery Save",
|
|
RadioSettingValueBoolean(_settings.save))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("beep", "Beep",
|
|
RadioSettingValueBoolean(_settings.beep))
|
|
basic.append(rs)
|
|
|
|
if self.MODEL != "W31E":
|
|
def _filter(name):
|
|
filtered = ""
|
|
for char in str(name):
|
|
if char in VALID_CHARS:
|
|
filtered += char
|
|
else:
|
|
filtered += " "
|
|
return filtered
|
|
|
|
val = str(self._memobj.radio.id_0x200)
|
|
if val == "\xFF" * 8:
|
|
rs = RadioSetting("embedded_msg.line1", "Embedded Message 1",
|
|
RadioSettingValueString(0, 32, _filter(
|
|
_message.line1)))
|
|
basic.append(rs)
|
|
|
|
rs = RadioSetting("embedded_msg.line2", "Embedded Message 2",
|
|
RadioSettingValueString(0, 32, _filter(
|
|
_message.line2)))
|
|
basic.append(rs)
|
|
|
|
return top
|
|
|
|
def set_settings(self, settings):
|
|
for element in settings:
|
|
if not isinstance(element, RadioSetting):
|
|
self.set_settings(element)
|
|
continue
|
|
else:
|
|
try:
|
|
if "." in element.get_name():
|
|
bits = element.get_name().split(".")
|
|
obj = self._memobj
|
|
for bit in bits[:-1]:
|
|
obj = getattr(obj, bit)
|
|
setting = bits[-1]
|
|
else:
|
|
obj = self._memobj.settings
|
|
setting = element.get_name()
|
|
|
|
LOG.debug("Setting %s = %s" % (setting, element.value))
|
|
setattr(obj, setting, element.value)
|
|
except Exception:
|
|
LOG.debug(element.get_name())
|
|
raise
|
|
|
|
@classmethod
|
|
def match_model(cls, filedata, filename):
|
|
match_size = False
|
|
match_model = False
|
|
|
|
# testing the file data size
|
|
if len(filedata) in [0x0408, ]:
|
|
match_size = True
|
|
|
|
# testing the model fingerprint
|
|
match_model = model_match(cls, filedata)
|
|
|
|
if match_size and match_model:
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
|
|
@directory.register
|
|
class KDC1(RT22Radio):
|
|
"""WLN KD-C1"""
|
|
VENDOR = "WLN"
|
|
MODEL = "KD-C1"
|
|
|
|
|
|
@directory.register
|
|
class ZTX6(RT22Radio):
|
|
"""Zastone ZT-X6"""
|
|
VENDOR = "Zastone"
|
|
MODEL = "ZT-X6"
|
|
|
|
|
|
@directory.register
|
|
class LT316(RT22Radio):
|
|
"""Luiton LT-316"""
|
|
VENDOR = "LUITON"
|
|
MODEL = "LT-316"
|
|
|
|
|
|
@directory.register
|
|
class TDM8(RT22Radio):
|
|
VENDOR = "TID"
|
|
MODEL = "TD-M8"
|
|
|
|
|
|
@directory.register
|
|
class RT22FRS(RT22Radio):
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT22FRS"
|
|
|
|
|
|
@directory.register
|
|
class RT622(RT22Radio):
|
|
VENDOR = "Retevis"
|
|
MODEL = "RT622"
|
|
|
|
|
|
@directory.register
|
|
class W31E(RT22Radio):
|
|
"""Baofeng W31E"""
|
|
VENDOR = "Baofeng"
|
|
MODEL = "W31E"
|
|
|
|
_ranges = [
|
|
(0x0000, 0x0200, 0x10),
|
|
]
|
|
_memsize = 0x0200
|
|
_block_size = 0x40
|
|
|
|
|
|
@directory.register
|
|
class BFT20(RT22Radio):
|
|
"""Baofeng BF-T20"""
|
|
VENDOR = "Baofeng"
|
|
MODEL = "BF-T20"
|
|
|
|
_fileid = [b"P330h33", ]
|