|
Radtel RT-470 (after RESET)
|
|
Firmware: V1.25A
|
|
Hardware: 10-V02
|
|
|
|
MENUS
|
|
00 SQL 0 - 9 (DEFAULT 3)
|
|
01 STEP 2.5K, 5.0K, 6.25K, 10.0K, 12.5K, 20.0K, 25.0K, 50.0K (DEFAULT 2.5K)
|
|
02 MEMCH CH-001
|
|
03 DELCH CH-001
|
|
04 R-CTCSS OFF, 67.0Hz - 254.1Hz (DEFAULT OFF)
|
|
05 R-DCS OFF, D023N - D754I (DEFAULT OFF)
|
|
06 T-CTCSS OFF, 67.0Hz - 254.1Hz (DEFAULT OFF)
|
|
07 T-DCS OFF, D023N - D754I (DEFAULT OFF)
|
|
08 VOICEPRI OFF, ENCRY1, ENCRI2,ENCRI3 (DEFAULT OFF)
|
|
09 TXP HIGH, Middle, LOW (DEFAULT HIGH)
|
|
10 SAVE OFF, Normal Mode, Super Mode, Deep Mode (DEFAULT Normal Mode)
|
|
11 ROGER OFF, BEEP, TONE1200 (DEFAULT OFF)
|
|
12 TOT OFF, 30S, 60S, 120S, 240S, 480S (DEFAULT 240S)
|
|
13 VOX OFF, 1 - 9 (DEFAULT OFF)
|
|
14 W/N WIDE, NARROW (DEFAULT WIDE)
|
|
15 VOICE OFF, ON (DEFAULT ON)
|
|
16 BEEP PROMPT OFF, ON (DEFAULT ON)
|
|
17 LANGUAGE ENGLISH, CHINESE (DEFAULT ENGLISH)
|
|
18 BCL OFF, ON (DEFAULT OFF)
|
|
19 SC-REV TO, CO, SE (DEFAULT CO)
|
|
20 PF2 RADIO, TX POWER, SCAN, SEARCH, LIGHT, NOAA, PTT B (DEFAULT RADIO)
|
|
21 PF2 LONG PRESS RADIO, TX POWER, SCAN, SEARCH, LIGHT, NOAA (DEFAULT SEARCH)
|
|
22 PF3 RADIO, TX POWER, SCAN, SEARCH, LIGNT, NOAA (DEFAULT LIGHT)
|
|
23 TOP KEY RADIO, TX POWER, SCAN, SEARCH, LIGNT, NOAA (DEFAULT SCAN)
|
|
24 ABR ON, 5sec, 10sec, 15sec, 20sec, 30sec, 1min, 2min, 3min (DEFAULT 15sec)
|
|
25 OFFSET 0.0000
|
|
26 SFT-D OFF, +, - (DEFAULT OFF)
|
|
27 Scan CTCSS OFF (ONLY CHOICE)
|
|
28 Scan DCS OFF (ONLY CHOICE)
|
|
29 CDCSS SAVE MODE ALL, Rx,Tx (DEFAULT ALL)
|
|
30 POWER ON MSG LOGO, VOLTAGE (DEFAULT LOGO)
|
|
31 ANI NAME NUM.1 - NUM.60 (20+ CHINESE CHOICES) (DEFAULT NUM.9)
|
|
32 S-CODE 1 - 15 (DEFAULT 1)
|
|
33 DTMF CODE OFF, BOT, EOT, BOTH (DEFAULT OFF)
|
|
34 DTMFST OFF, DT-ST, ANI-ST, DT+ANI (DEFAULT OFF)
|
|
35 AUTOLOCK OFF, 5S, 10S, 15S (DEFAULT OFF)
|
|
36 SCAN ADD Delet, ADD (DEFAULT Delet)
|
|
37 TONE 1000hz, 1450hz, 1750hz, 2100hz (DEFAULT 1750hz)
|
|
38 PTT-LT 0Ms, 100Ms, 200Ms, 400Ms, 600Ms, 800Ms, 1000Ms (DEFAULT 800Ms)
|
|
39 MENU EXIT TIME 5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 60sec (DEFAULT 10sec)
|
|
40 VOX DELAY 0.5sec, 0.6sec, 0.7sec, 0.8sec, 0.9sec, 1.0sec, 1.1sec, 1.2sec, 1.3sec, 1.4sec, 1.5sec, 1.6sec, 1.7sec, 1.8sec, 1.9sec, 2.0sec (DEFAULT 1.0sec)
|
|
41 RP-STE OFF, 1S - 10S (DEFAULT OFF)
|
|
42 RPT-RL OFF, 1S - 10S (DEFAULT OFF)
|
|
43 MDF-A NAME, FREQ, CH (DEFAULT FREQ)
|
|
44 MDF-B NAME, FREQ, CH (DEFAULT FREQ)
|
|
45 TDR OFF, ON (DRFAULT ON)
|
|
46 TX-A/B OFF, A, B (DEFAULT OFF)
|
|
47 STE OFF, ON (DEFAULT ON)
|
|
48 AL-MOD ON SITE, SEND SOUND, SEND CODE (DEFAULT ON SITE)
|
|
49 RX END TAIL OFF, MDC1200 (DEFAULT OFF)
|
|
50 TAIL FREQ 55Hz, 62.5Hz (DEFAULT 55Hz)
|
|
51 RESET VFO, ALL (DEFAULT VFO)
|
|
52 VERSION Firmware: V1.25A Hardware: 10-V02
|
